Providing M/T Works To Mural Virgarh Road Km 0/0 To 0/850 Sh Providing And Laying Tarring Work In Km 0/0 To 0/850
Tender Value
9.63 Lakhs
Estimated cost
Bid Submission
08 Jul 2021
0 days left
EMD
19300
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
JUBBAL → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing M/T Works To Mural Virgarh Road Km 0/0 To 0/850 Sh Providing And Laying Tarring Work In Km 0/0 To 0/850
BOQ
| Name of Work: RProviding M/T Works to Mural Virgarh Road Km 0/0 to 0/850 (SH:-Providing and laying Tarring work in Km 0/0 to 0/850) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning the road surface with hydralic broom and spraying primer at therate 0.85kg (zero point eight five kilogramme) per square metre using mechnical means as per MORD Technical Specifictions Clause 502 by mechanical means and as per direction of Engineer-in-Charge including carriage of material through all modes of trasportation within all leads and lifts and other incidentials. | 2851.75 | Per Cum | |
| 2 | 2 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg (zero point two seven five kilogramme) per square metre on the prepared granular surface and cleaned with Hydraulic broom as per MORD Technical Specification Clause 503 by mechanical means as per direction of Engineer-in-Charge including carriage of material through all modes of trasportation within all leads and lifts and other incidentials. | 2851.75 | Per cubic | |
| 3 | 3 | Providing, laying and rolling of open-graded premix carpet of 20 mm (twenty milimeter) thickness composed of 13.2 mm to 5.6 mm (thirteen point two milimeter to five point six milimeter) coursed stone aggregates @ 0.27 Cum (zero point two seven) cubic meter mixed with 14.6 kg (Forteen point six) kilogramme per 10 (ten) Sqm bitumen VG-10( viscosting grade ten) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying with paver finisher and rolling with a three wheel 80-100 kN (eighty to hundred) static roller capacity, finished to required level and grades to be followed by seal coat of Type B as per Technical Specification Clause 508 VG-10( viscosting grade ten). including all leads and lifts as per directions of Engineer in Charge. | 2851.75 | Per Cum | |
| 4 | 4 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B VG-10 as per Technical Specification Clause 510 ( viscosting grade ten) at the rate of 6.8 ky (six point eight kilograme) per 10 (Ten)square meter by mechanical means including all leads and lifts as per directions of Engineer in Charge. | 2851.75 | Per cubic |
AI Tender Summary
Tender Timeline
Jul 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 09, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender