Supply Of Procurement Of Tool Cabinets And Tools.Procurement Of Tool Cabinets And Tools., Roll Cart For Small Material Handling:- Service Cart, 2 Shelves With Locking Drawer, Red, Service Cart Overall Dimensions, Width: 30, Depth: 17, Height: 36.7-Delhi

Supply Of Procurement Of Tool Cabinets And Tools.Procurement Of Tool Cabinets And Tools., Roll Cart For Small Material Handling:- Service Cart, 2 Shelves With Locking Drawer, Red, Service Cart Overall Dimensions, Width: 30, Depth: 17, Height: 36.7 / 32, €¢ High Gloss Powder Coat Paint Is Scratch & Chemical Resistant €¢ Storage Drawers For Frequently Used Tools €¢ Heavy Duty Undercarriage To Help Support Bottom Tray Load €¢ 18 Gauge Heavy Duty Steel €¢ 4 X 1 Swivel Casters , Tool Cabinet With Top Chest:- 54 Wide X 18 Deep 13-Drawer Roll Cabinet, Designed For Use In Commercial Applications. Equipped With Ball Bearing Slides, Overall Dimensions: Width: 54, Depth: 18.3 / 4, Height: 40.1 / 4, Capacity: 18781 Cu.In. 54 Wide X 18 Deep 9-Drawer Top Chest, Overall Dimensions: Width: 54, Depth: 18.3 / 4, Height: 22.1 / 4, Capacity: 12537 Cu.In. , Torque Tester:- Electronic, 60-600 Ft-Lb, 3 / 4 Drive, €¢ Designed To Be A Sturdy, Low-Cost Tester, These Electronic Torque Testers Can Be Placed On The Wall In The Factory Or On A Bench To Allow Operators To Test Torque Wrenches Or Power Tools Without Having To Leave Their Station €¢ Integral Transducer And Sturdy Housing Allow Mounting In Virtually Any Position €¢ Integral Transducer: Full Bridge Strain Gauge, 350 Ohms, 1500 µe, 3Mv / V F.S., 3.75V Excitation €¢ Unique Neck Design Allows Operator To See Display When Testing Long Torque Wrenches €¢ Accuracy: ±0.5% Of Reading ± 1 Count In The Least Significant Digit ( 10-100% Of Full Range ) At 25 ° C €¢ Display Accuracy: 4 Digits, 9, 999 Counts €¢ Stability: +0.044% Per C €¢ Track And Peak Modes €¢ Can Be Used With Non- Impacting Power Tools ( Joint Rate Simulators Required ) €¢ Dual Scale ( English / Nm Or English / Dnm ) €¢ Auto / Manual Display Reset €¢ Reads Bi-Directional ( Clockwise And Counterclockwise ) €¢ Uses Rechargeable Nicad Batteries €¢ All Testers Include Charger ( S18005027 ) And Storage Case ( Pb1ett ) , Battery Operated Impact Wrench, 1 / 2 Square Drive:- 18 V 1 / 2 Drive Monsterlithium Cordless Impact Wrench, €¢ Provides 230 Ft-Lb At A Light Weight Of 4.5 Lb €¢ High Capacity 72 Watt-Hour, 18 V Monster Lithium Battery For Long Run Time €¢ The Ct8815a Can Remove 525 Bolts Tightened At 200 Ft-Lb On One Battery Charge €¢ Cold- Formed, Alloy Steel Anvil For Maximum Durability €¢ The Digital Fuel Gauge And Micro-Controller In The Lithium Battery Monitors Temperature And Amperage To Prevent Motor Overheating €¢ Ergonomic Overmolded Cushion Grip For Continuous Use With Less Fatigue €¢ Includes Impact Wrench, ( 2 ) Batteries, ( 1 ) Charger And A Tote Bag, Blows Per Minute: 3480, Free Speed: 2400 Rpm, Height W / Battery: 9.5 ( 241 Mm ) , Length: 6.5 ( 165 Mm ) , Sound Pressure Level: 97 Db ( A ) , Torque Output: 230 Ft.Lbs. ( 311.8 Nm ) . Vibration Level: 5.3 M / Sâ², Weight With Battery Pack: 4.5 Lb ( 2.4 Kg ) , Precision Screwdriver Set:- Precision Screwdriver Set, 24 Pcs, For Slotted, Phillips, Pozidriv, Tor X And Hexagon Head Screws, In Plastic Case With Hanging Hole, Set Includes: Flat Tip 1.0X50, 1.2X50, 1.5X50, 1.8X50, 2.0X50, 3.0X50, 3.5X75, 4X75 Mm, Phillips Tip: Ph00x50, Ph0x50, Ph1x75 Mm, Pozidriv Tip: Pz0x50, Pz1x75 Mm, Torx Tip : T6x50, T7x50, T8x50, T9x50, T10x50, T15x75, T20x75 Mm, Hex Tip: H1.5X50, H2x50, H2.5X50, H3x75 Mm.

Refer document

Refer document

Refer document

Sl. No.	Item Description
1	Procurement of Tool cabinets and Tools.
2	Roll Cart for small material handling:- SERVICE CART, 2 Shelves with Locking Drawer, Red, Service Cart Overall Dimensions, Width: 30", Depth: 17", Height: 36.7/32", • High gloss powder coat paint is scratch & chemical resistant • Storage drawers for frequently used tools • Heavy duty undercarriage to help support bottom tray load • 18 gauge heavy duty steel • 4" x 1" swivel casters
3	Tool cabinet with Top Chest:- 54" Wide x 18" Deep 13-Drawer Roll Cabinet, Designed for use in commercial applications. Equipped with ball bearing slides, Overall Dimensions: Width: 54", Depth: 18.3/4", Height: 40.1/4", Capacity: 18781 Cu.in. 54" Wide x 18" Deep 9-Drawer Top Chest, Overall Dimensions: Width: 54"", Depth: 18.3/4", Height: 22.1/4", Capacity: 12537 Cu.in."
4	Torque Tester:- Electronic, 60-600 ft-lb, 3/4" drive, • Designed to be a sturdy, low-cost tester, these electronic torque testers can be placed on the wall in the factory or on a bench to allow operators to test torque wrenches or power tools without having to leave their station • Integral transducer and sturdy housing allow mounting in virtually any position • Integral Transducer: Full bridge strain gauge, 350 ohms, 1500 µE, 3mV/V F.S., 3.75V excitation • Unique neck design allows operator to see display when testing long torque wrenches • Accuracy: ±0.5% of reading ± 1 count in the least significant digit (10-100% of full range) at 25 ° C • Display Accuracy: 4 digits, 9,999 counts • Stability: +0.044% per C • Track and Peak modes • Can be used with non- impacting power tools (joint rate simulators required) • Dual scale (English/Nm or English/dNm) • Auto/manual display reset • Reads bi-directional (clockwise and counterclockwise) • Uses rechargeable NiCad batteries • All testers include charger (S18005027) and storage case (PB1ETT)
5	Battery Operated Impact Wrench,1/2" square drive:- 18 V 1/2" Drive MonsterLithium Cordless Impact Wrench, • Provides 230 ft-lb at a light weight of 4.5 lb • High capacity 72 watt-hour, 18 V Monster Lithium battery for long run time • The CT8815A can remove 525 bolts tightened at 200 ft-lb on one battery charge • Cold- formed, alloy steel anvil for maximum durability • The digital fuel gauge and micro-controller in the lithium battery monitors temperature and amperage to prevent motor overheating • Ergonomic overmolded cushion grip for continuous use with less fatigue • Includes impact wrench, (2) batteries, (1) charger and a tote bag, Blows Per Minute: 3480, Free Speed: 2400 RPM, Height w/Battery: 9.5" (241 mm), Length: 6.5" (165 mm), Sound Pressure Level: 97 dB (A), Torque Output: 230 ft.lbs. (311.8 Nm). Vibration Level: 5.3 m/s², Weight With Battery Pack: 4.5 lb (2.4 kg)
6	Precision Screwdriver set:- Precision screwdriver set, 24 pcs, For slotted, Phillips, Pozidriv, TOR X and hexagon head screws, In plastic case with hanging hole, Set Includes: Flat Tip 1.0x50, 1.2x50, 1.5x50, 1.8x50, 2.0x50, 3.0x50, 3.5x75, 4x75 mm, Phillips Tip: PH00x50, PH0x50, PH1x75 mm, Pozidriv Tip: PZ0x50, PZ1x75 mm, Torx Tip : T6x50, T7x50, T8x50, T9x50, T10x50, T15x75, T20x75 mm, Hex Tip: H1.5x50, H2x50, H2.5x50, H3x75 mm.