Military Engineer Services-MES has published Repair To Flooring , Plastering And Tiling Of Certain Locations At Af Station Gwalior. Submission Date for this Tender is 31-07-2021. Civil Work Tenders in GE AF TA GWALIOR Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Jul-2021 | Date corrigendum | Date | 26-07-2021 |
| 2 | 13-Jul-2021 | BOQ and Certain Ammendment | BOQ | 26-07-2021 |
| 3 | 26-Jul-2021 | Corrigendum to critical dates | Date | 31-07-2021 |
| 4 | 27-Jul-2021 | BOQ Item description related ammendment | Other | 31-07-2021 |
| Name of Work: REPAIR TO FLOORING, PLASTERING AND TILING OF CERTAIN LOCATIONS AT AF STN GWALIOR | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demollition of cement concrete (unreinforced) including floor tiles, ground floors and pavings n. exc 15 cm thick below or above G.L complete all as specified and directed . | BI01010001010000000000000515BI0100001116 | 18.88 | Cum |
| 2 | 2 | M&L 100mm thick cement concrete 1:4:8 Type D2 ( using 40mm graded stone aggregates) as in sub base complete all as specified and directed. | BI01010001010000000000000515BI0100001112 | 75 | Sqm |
| 3 | 3 | M&L for 75 mm thick plain cement concrete (1:3:6) type C2, using 20 mm graded stone aggregate as in Plinth protection and finishing the surface even & smooth without using extra cement complete all as specified and directed. | BI01010001010000000000000515BI0100001115 | 85 | Sqm |
| 4 | 4 | M&L for Cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in kerbs or mud stops, rounded or chamfered on edges, slightly rounded chamfered angles and throating incl necessary form work. | 1 | Cum | |
| 5 | 5 | M&L for 25 mm thick PCC (1:2:4) type B0 (12.5 mm graded stone agg) as in sub base of flooring complete all as specified and directed. | 160 | Sqm | |
| 6 | 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. | 315 | Sqm | |
| 7 | 7 | M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on brick work or concrete surface in cement moratar 1:4 complete all as specified and directed. | 230 | Sqm | |
| 8 | 8 | M&L for 10mm thick doublle charged coloured vitrified tiles (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement match with tiles over 15mm thick screed bed in CM 1:6 to complete all as specified and directed. | 80 | Sqm | |
| 9 | 9 | All as per item No.8 here in before but as in skirting etc. but over 10 mm thick rendering or bedding in layer of mortar fo in cement plaster 1:4 complete all as specified and directed. | 5 | Sqm | |
| 10 | 10 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid in any type of mortor complete all as specified and directed. | 12 | 10Sqm | |
| 11 | 11 | M&L for Marble stone work 18 to 20mm thick (table rubbed and polished) in floor, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment over 15mm thick screed bed in CM 1:6 complete all as specified and directed. Note: Marble stone shall be of best quality, Colour /Shade will be approved by GE. | 100 | Sqm | |
| 12 | 12 | M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in floors, steps pillar, platform or oval shape wash hand basin including cutting to fit the WHB, partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. | 20 | Sqm | |
| 13 | 13 | M&L in repair for 60mm thick machine pressed precast coloured concrete interlocking paver block, Glossy finish any shape and size and colour confirming to IS 15658-2006, M-35 Grade with grey cement and pigment complete all as specified and directed. Make: ISI Marked as Approved by GE. | 100 | Sqm | |
| 14 | 14 | M&L for sand filling under floor watering and levelllling to receive pavour blocks. | 3 | Cum | |
| 15 | 15 | M&L in repair for 12mm thick Endura designer tiles of size n. exc 0.16 Sqm any colour and shape with grey cement and pigment set, jointed and pointed on neat cement slurry as in floors including 15 mm thick screed bed with bedding layerin CM (1:6) complete all as specified and directed. Make DUROTA/JOHNSON. | 100 | Sqm | |
| 16 | 16 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. | 180 | Sqm | |
| 17 | 17 | M&L 16mm thick Armstrong DUNE RH 99 Ceiling board with approved pattern (Make- Armstrong) 600x600mm size fixed over and including pre powder coated GI frame with suspension system (Grid) comprising of T section 25mmx32.5mmx1.6mm size as main runners and wall angle to placed along the wall at desired level of the False ceiling , 4mm dia GI suspender of suitable size and dash fastners to be provided at desired distance including re-fixing false ceiling lights, electric fittings/fixture complete all as specified and directed by Engr-in-Charge. | 80 | Sqm | |
| 18 | 18 | S&F in repairs 12mm thick semi perforated Calcium Celicate Ceiling board with approved pattern (Make- Armstrong) 600x600mm size fixed to existing GI/Aluminium grid frame including tigtning of suspenders whereever required complete all as specified and directed by Engr-in-Charge. | 20 | Sqm | |
| 19 | 19 | S & F solid PVC wall lining/Panneling consisting of 5mm thick any colour wood grains printed PVC sheet, pre laminated one side inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. | 100 | Sqm | |
| 20 | 20 | M & L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed. | 500 | RM | |
| 21 | 21 | M&L for 15mm thick rendering fare face of brick/stone masonry walls in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed including taking down cement plaster on brick surface or stone including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. | 100 | Sqm | |
| 22 | 22 | M&L for Preparation of newly plaster surface of wall and applying two coat of distemper oil emulsion over a coat of calk whiening (preparatory to distempering) white or tinted as approved all as specified and directed. | 50 | Sqm | |
| 23 | 23 | M&L for Preparation of newly plastered surface and applying two coat of weather coat exterior emultion (Make : ACE of Asian Paints or equivalent in Berger Paints etc) white or tinted over a coat of primer as approved complete all as specified and directed. | 50 | Sqm | |
| 24 | 24 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the internal/ external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron | 500 | RM | |
| 25 | 25 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified & directed | 200 | Sqm | |
| 26 | 26 | Taking down chowkats with shutters (without taking off shutters from the frames) of any description exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified & directed | 5 | Each | |
| 27 | 27 | S&F in repairs Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief. | 70 | Kg | |
| 28 | 28 | S&F 5mm thick tinted glass, and glazing in squre exc 0.50 Sqm to aluminium frame with suitable beading in each pane at any height complete | 5 | Sqm | |
| 29 | 29 | M&L for grinding and polishing to existing marble and kota stone flooring/skirting etc complete as per direction by Engr-in-charge. | 380 | Sqm | |
| 30 | 30 | S&F in repairs 100 mm Brass Mortice lock 4 lever, vertical type, suitable for auminium doors Make : Godrej / Harrison | 5 | Each | |
| 31 | 31 | Dismentling of existing Aluminium Glazed Frame with sound proof glass (Size: 5 mtr x 2.1mtr) of ATC Tower and refixing the same at its position with Aluminium angle cleat and dash fastners (min size 75mm) @ n exc 1.2 mtr C/C at any height complete all as specified and directed by Engr-in-Charge \nNote : Any damage to the glass/ frame will be rectified by the contractor without any extra cost. | 1 | Each\nJob | |
| 32 | 32 | S&F sound proof glass in two layers outer 6mm thick toughned tinted glass, 10mm gap and inner 6mm thick touhhned plain Glass fixed to existing aluminiun frame with necessary rubber beading/sealent with aluminium beading including hacking out old broken glass from the frame all as specified and directed by Engr-in-Charge. | 2.5 | Sqm | |
| 33 | 33 | S & F in repairs Nylon net for Bird proofing for shelter / hanger / shed / storage accn and fixed with nylon wire / binding wire including spiral binding all over area at any height etc complete all as specified and directed details as under :- \n(i) Burst strength up to 44 pound\n(ii) Shall meet ISO 1806 Protocols\n(iii) Size of mesh 20mm X 20mm\n(iv) Thickness 0.071 inch ( 6 strand each 0.012 inch)\n(v) Quality Control :- Filament are twisted and kotted pressur, stretched and tightened.\n(vi) Break strenght as required.\n(vii) Chemical properties :- Polythylene ( a paraffin hydrocarbon, chemically inert, flame retardant and highly resistant to most chemical at temperature. High resistance to acids and alkoloids at all concerntration. (viii) High temperature 210 to 239 degree F (100 to 115 degree centigrade. (ix) Low temperature resistance 139 to 166 degree F (-95 to -11 degree centigrade) Make :- As approved by the GE after cheking above parameters from manufacturers test certificate. | 265 | Sqm | |
| 34 | 34 | Repair and tigthening of all nut bolts/Screws of angle iron truss and Roof sheet of Aircraft shelters at 10-15 mtr height including taking down old nylon bird proofing net and refixing the same at its position properly complete all as specified and directed by Engr-in-Charge | 6400 | Sqm | |
| 35 | 35 | S&F in repairs 160mm dia PVC (SWR) pipes single socketed in any length at any height with rubber ring joints fixed to walls/ hanger cladding with necessary brackets. | 80 | RM | |
| 36 | 36 | S&F in repairs 160mm dia PVC (SWR) pipes single socketed in any length at any height with rubber ring joints fixed to walls/ hanger cladding with necessary brackets | 18 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
