Construction . Of Balance Work Of Phc Mongri . ( Udhampur ) Pl . Refer To Boq, Udhampur-Jammu And Kashmir

TDR : 28348241

Tender Notice
BOQ

Expired

Udhampur , Jammu And Kashmir

Tender Brief : Construction . Of Balance Work Of Phc Mongri . ( Udhampur ) Pl . Refer To Boq

Document Fees
₹ 1000 /-

EMD
Refer document

Tender Value
₹ 41.06 Lakhs /-

Submission Date
08-07-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Const. of balance work of PHC Mongri
1	1	Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width & for shafts, wells, cesspits & the like not exceeding 10 sqm on plan, depth upto 1.5 m including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled & neatly dressed. All kinds of soil	83	Cum
2	2	Surface dressing (Berm Dressing) of the ground including removing vegetation & in- equalities not exceeding 15 cm deep & disposal of rubbish lead upto 50 m & lift upto 1.5 m in. All kinds of soil.	600	Sqm
3	3	Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work upto plinth level 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) Nallah.	84	Cum
4	4	Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agg. 20 mm nominal size) crushed with 20% plum.	59	Cum
5	5	Brick work with common burnt clay F.P.S (non- modular) bricks of class designation 75 in foundation and plinths in cement mortar 1:6 (1cement : 6 coarse sand).	54	Cum
6	6	Providing & Laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Crushed	32	Cum
7	7	Extra for brick works in super structure above plinth level up to floor five level.	54	Cum
8	8	Extra for half brick masonry in superstructure above plinth level up to floor V level.	1	Sqm
9	9	Providing & Laying Reinforced cement concrete work in beams suspended floors, roofs, having slopes up to 15 * landings , balconies , shelves , Chajjas, lintels, bands plain window sills, stair cases & spiral stair cases up to floor five level excluding the cost of centering , shuttering, finishing & reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone agg. 20 mm nominal size) crushed.	37	Cum
10	10	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg.) but excl. the cost of nosing of steps etc. 50 mm thick with 20 mm nominal size stone aggregate	29	Sqm
11	11	Providing & Laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing & reinforcement. All work up to plinth level. 1:1 ½ :3 (1 cement : 1 ½ coarse sand : 3 graded stone agg. 20 mm nominal size) .	4	Cum
12	12	Reinforcement for RCC works incl. straightening, cutting, bending, placing in position & binding all complete cold twisted bars.	62	Kg
13	13	Centering & shuttering incl. strutting , propping etc. and removal of form work for :-
14	13.1	Foundations, footings, bases of columns etc.	551	Sqm
15	13.2	Lintels, beams, plinth beams, girders, bressumers and cantilevers.	71	Sqm
16	13.3	Suspended floors, roofs, landings, balconies and access platforms.	178	Sqm
17	13.4	Edges of slabs and breaks in floors and walls upto 20cm wide.	130	Rmt.
18	13.5	Columns, pillars, piers, abutments, posts and struts. \n	49	Sqm
19	14	Structural steel work welded in built up section/ framed work including cutting hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc as required in grating frames, guard bars, ladders, railings brackets, gates & similar works.	2168	Kg
20	15	6mm thick cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand).\n	263	Sqm
21	16	15mm cement plaster on the rough side of single or half brick wall of mix in 1:6 (1 cement : 6 fine sand).	382	Sqm
22	17	12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand).	321	Sqm
23	18	Providing & fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all complete. Fixed to steel windows by welding.	336	Kg
24	19	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers •. abutments, pillars, posts, struts, butteresses, string or laces, courses, parapets,coping, bed blocks, anchor blocks, plain window sills,sunken floors fillets etc. upto floor five level, excluding the cost of centring, shuttering and finishing-1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nommal size (Crushed)	5	Cum
25	20	Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades , laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ; Size of tile 60x60 cm	150	Sqm
26	21	Providing & fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S pressed Butt hinges bright finished off required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of engineer- in charge. Second class Deodar wood. 35 mm thick.	17	Sqm
27	22	Providing & fixing panelling or panelling & glazing in panelled and glazed shutters for door, windows & clerestory windows (area of opening for panel inserts excl. portion inside grooves or rebates to be measured) panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Particle board 12 mm thick plain particle board flat pressed 3 layer or graded wood particle board medium denesity grade I IS: 3087 marked	11	Sqm
28	23	Providing & fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc carriage. 2nd class deodar wood 50x20 mm	24	Rmt.
29	24	Providing & fixing glazed shutters 35mm thick for doors, windows and clear story windows using 10Kg/Sqm (4mm thick) glass panes including stainless steel but hinges of size 75mm x 62mm x 2mm of make Kitch, Arch, Blum with necessary stainless screws in second class deodar wood.	13	Sqm
30	25	Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauge of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors, windows and clerestory windows with hinges and necessary screws in second class deodar wood. \n	22	Sqm
31	26	Add or deduct for plaster drip coarse / groove in plastered surface of moulding to RCC projections.	666	Rmt
32	27	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.	921	Sqm
33	28	Applying one coat of water thinable cement primer of approved brand & manufacture of wall surface water thinable cement primer.	921	Sqm
34	29	Providing and applying white cement based putty of average thickness 1mm of approvded brand and manufacture over the plastered wall surfaces to prepare the surafce even and smooth complete.	921	Sqm
35	30	Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard & soft wood).	119	Sqm
36	31	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work.	119	Sqm
37	32	Providing & fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
38	32.1	125 mm	10	Each
39	32.2	100 mm	44	Each
40	33	Providing & fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.
41	33.1	250x10 mm	10	Each
42	33.2	100x10 mm	88	Each
43	34	Providing & fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts & screws etc. complete 250x16 mm	5	No.
44	35	Providing & fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC-10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete Twin rubber stopper.	5	Each
45	36	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth	33	Sqm
46	37	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg.) finished with a floating coat of neat cement including cement slurry, but excl. the cost of nosing of steps etc. 50 mm thick with 20 mm nominal size stone aggregate	30	Sqm
47	38	Cement plaster skirting (upto 30cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement.18 mm thick	3	Sqm
48	39	Providing & fixing glass strips in joints of Terrazzo/ cement conc. Floor 40 mm wide and 4 mm thick.	74	Rmt.
49	40	Providing and fixing 1st quality ceramic glazed tiles conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in all colour , shades except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg per Sqm. Incl. pointing in white cement mixed with pigment of matching shade complete.	14	Sqm
50	41	Providing and laying 75 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge	600	Sqm
51	42	Providing & fixing G.I. pipes complete with G.I fittings and clamps, including cutting and making good the walls etc. Exposed on wall 15 mm dia nominal bore (Medium) (Internal Work)	15	Rmt.
52	43	Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) 20 mm dia. nominal bore	120	Rmt.
53	44	Providing and fixing G.I union in G.I pipe including cutting and threading the pipe and making long screws etc complete.
54	44.1	15 mm nominal bore	4	Each
55	44.2	20 mm nominal bore	12	Each
56	45	Providing & fixing tank connecting nippltecomplete
57	45.1	20 mm dia nominal bore (Medium) (External work)	5	Each
58	45.2	15 mm dia	4	Each
59	46	Providing and fixing ball valve (brass) of approved quality complete
60	46.1	20 mm nominal bore	5	Each
61	46.2	15 mm nominal bore	4	Each
62	47	Providing & fixing on wall face unplasticised- Rigid P.V.C rain water pipe confirming to I.S – 13592 type –A incl. jointing with seal ring confirming to I.S- 5382 leaving 10 mm gap for thermal expansion
63	47.1	75 mm dia	122	Rmt.
64	47.2	110 mm dia	46	Rmt.
65	48	Providing & fixing on wall face un- plasticized- PVC moulded fittings/ accessories for un plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion Coupler
66	48.1	75 mm dia	8	Each
67	48.2	110 mm dia	5	Each
68	49	Providing & fixing on wall face un- plasticized- PVC moulded fittings/ accessories for un plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion Bend
69	49.1	75 mm dia	30	Each
70	49.2	110 mm dia	14	Each
71	50	Providing & fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes confirming to IS:13592 type A including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion single Tee with doors
72	50.1	110x110x110 mm	5	Each
73	50.2	75x75x75 mm	5	Each
74	51	Providing & fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes confirming to IS:13592 type A including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion Shoe (Plain) 75 mm dia	24	Each
75	52	Providing & fixing white vitreous china pedestal type water closet (European type WC pan) with seat and lid 10 litre low level white PVC flushing cistern, including flush pipe with manually controlled device (handly lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required WC pand with ISI marked white solid plastic seat and lid.	4	Each
76	53	Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous ChinaWash basin size 550x400 mm with a pair of 15 mm C. P. brass without pillar taps	6	Each
77	54	Providing and fixing white vitreous china pedestal for wash Basin completely recessed at the back for the reception of pipes and fittings. (Hindware / Cera/Parryware make)	6	Each
78	55	Providing & fixing C.P. brass angle valve for basin mixer & geyser points of approved make conforming to IS: 8931. 15 mm nominal bore.	20	Each
79	56	Providing and fixing C.P brass long nose bib cock of approved quality confirming to IS standards and weighing not less than 810 grams 15 mm nominal bore.	12	Each
80	57	Providing & fixing C.P brass bib cock of approved quality confirming to IS 8931: 15 mm nominal bore. (Parry ware, Cera, etc).	2	Each
81	58	Providing and fixing C.P brass close hole basin mixer pillar tap of approved quality and make weighing not less than 1.970 kg 15 mm nominal bore of standard back type.	12	Each
82	59	Providing & fixing CP brass jet	4	Each
83	60	Providing & fixing CP brass towel rod	3	Each
84	61	Providing & fixing CP brass towel ring	3	Each
85	62	Providing & fixing CP brass shelf	3	Each
86	63	Providing & fixing CP brass soap dish	6	Each
87	64	Providing & fixing CP brass gratings	20	Each
88	65	Providing & fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.	5	Each
89	66	Providing & fixing P.V.C waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipes 32 mm dia.	10	Each
90	67	Providing and fixing unplasticised PVC connections pipe with brass unions 45 cm length 15 mm nominal bore.	30	Each
91	68	Providing & placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank (Sintex, Electroplaste Star, Lotous or equivalent having valid ISI License). (1000 ltr capacity)	5000	Ltr.
92	69	Providing & fixing CP shower complete	2	Each
93	70	Const. of manholes of internal size 30x30x30 cm	4	Each
94	71	Providing & fixing electric motor 1/2 H.P	2	Each
95	72	Carriage of material by M.T incl loading/unloading & stacking complete
96	72.1	Sand av lead 102 km	114	Cum
97	72.2	Stone agg below 40 mm nominal size av lead 53 km	200	Cum
98	72.3	Stone av lead 1 km	12	Cum
99	72.4	Bricks av lead 62 km	27003	No.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Jammu And Kashmir Tenders

Construction Tenders

Civil Construction Tenders

Civil Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction . Of Balance Work Of Phc Mongri . ( Udhampur ) Pl . Refer To Boq, Udhampur-Jammu And Kashmir

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Name of Work: Const. of balance work of PHC Mongri
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width & for shafts, wells, cesspits & the like not exceeding 10 sqm on plan, depth upto 1.5 m including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled & neatly dressed. All kinds of soil		83	Cum
2	2	Surface dressing (Berm Dressing) of the ground including removing vegetation & in- equalities not exceeding 15 cm deep & disposal of rubbish lead upto 50 m & lift upto 1.5 m in. All kinds of soil.		600	Sqm
3	3	Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work upto plinth level 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) Nallah.		84	Cum
4	4	Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agg. 20 mm nominal size) crushed with 20% plum.		59	Cum
5	5	Brick work with common burnt clay F.P.S (non- modular) bricks of class designation 75 in foundation and plinths in cement mortar 1:6 (1cement : 6 coarse sand).		54	Cum
6	6	Providing & Laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Crushed		32	Cum
7	7	Extra for brick works in super structure above plinth level up to floor five level.		54	Cum
8	8	Extra for half brick masonry in superstructure above plinth level up to floor V level.		1	Sqm
9	9	Providing & Laying Reinforced cement concrete work in beams suspended floors, roofs, having slopes up to 15 * landings , balconies , shelves , Chajjas, lintels, bands plain window sills, stair cases & spiral stair cases up to floor five level excluding the cost of centering , shuttering, finishing & reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone agg. 20 mm nominal size) crushed.		37	Cum
10	10	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg.) but excl. the cost of nosing of steps etc. 50 mm thick with 20 mm nominal size stone aggregate		29	Sqm
11	11	Providing & Laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing & reinforcement. All work up to plinth level. 1:1 ½ :3 (1 cement : 1 ½ coarse sand : 3 graded stone agg. 20 mm nominal size) .		4	Cum
12	12	Reinforcement for RCC works incl. straightening, cutting, bending, placing in position & binding all complete cold twisted bars.		62	Kg
13	13	Centering & shuttering incl. strutting , propping etc. and removal of form work for :-
14	13.1	Foundations, footings, bases of columns etc.		551	Sqm
15	13.2	Lintels, beams, plinth beams, girders, bressumers and cantilevers.		71	Sqm
16	13.3	Suspended floors, roofs, landings, balconies and access platforms.		178	Sqm
17	13.4	Edges of slabs and breaks in floors and walls upto 20cm wide.		130	Rmt.
18	13.5	Columns, pillars, piers, abutments, posts and struts. \n		49	Sqm
19	14	Structural steel work welded in built up section/ framed work including cutting hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc as required in grating frames, guard bars, ladders, railings brackets, gates & similar works.		2168	Kg
20	15	6mm thick cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand).\n		263	Sqm
21	16	15mm cement plaster on the rough side of single or half brick wall of mix in 1:6 (1 cement : 6 fine sand).		382	Sqm
22	17	12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand).		321	Sqm
23	18	Providing & fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all complete. Fixed to steel windows by welding.		336	Kg
24	19	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers •. abutments, pillars, posts, struts, butteresses, string or laces, courses, parapets,coping, bed blocks, anchor blocks, plain window sills,sunken floors fillets etc. upto floor five level, excluding the cost of centring, shuttering and finishing-1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nommal size (Crushed)		5	Cum
25	20	Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades , laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ; Size of tile 60x60 cm		150	Sqm
26	21	Providing & fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S pressed Butt hinges bright finished off required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of engineer- in charge. Second class Deodar wood. 35 mm thick.		17	Sqm
27	22	Providing & fixing panelling or panelling & glazing in panelled and glazed shutters for door, windows & clerestory windows (area of opening for panel inserts excl. portion inside grooves or rebates to be measured) panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Particle board 12 mm thick plain particle board flat pressed 3 layer or graded wood particle board medium denesity grade I IS: 3087 marked		11	Sqm
28	23	Providing & fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc carriage. 2nd class deodar wood 50x20 mm		24	Rmt.
29	24	Providing & fixing glazed shutters 35mm thick for doors, windows and clear story windows using 10Kg/Sqm (4mm thick) glass panes including stainless steel but hinges of size 75mm x 62mm x 2mm of make Kitch, Arch, Blum with necessary stainless screws in second class deodar wood.		13	Sqm
30	25	Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauge of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors, windows and clerestory windows with hinges and necessary screws in second class deodar wood. \n		22	Sqm
31	26	Add or deduct for plaster drip coarse / groove in plastered surface of moulding to RCC projections.		666	Rmt
32	27	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.		921	Sqm
33	28	Applying one coat of water thinable cement primer of approved brand & manufacture of wall surface water thinable cement primer.		921	Sqm
34	29	Providing and applying white cement based putty of average thickness 1mm of approvded brand and manufacture over the plastered wall surfaces to prepare the surafce even and smooth complete.		921	Sqm
35	30	Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard & soft wood).		119	Sqm
36	31	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work.		119	Sqm
37	32	Providing & fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
38	32.1	125 mm		10	Each
39	32.2	100 mm		44	Each
40	33	Providing & fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.
41	33.1	250x10 mm		10	Each
42	33.2	100x10 mm		88	Each
43	34	Providing & fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts & screws etc. complete 250x16 mm		5	No.
44	35	Providing & fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC-10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete Twin rubber stopper.		5	Each
45	36	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth		33	Sqm
46	37	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg.) finished with a floating coat of neat cement including cement slurry, but excl. the cost of nosing of steps etc. 50 mm thick with 20 mm nominal size stone aggregate		30	Sqm
47	38	Cement plaster skirting (upto 30cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement.18 mm thick		3	Sqm
48	39	Providing & fixing glass strips in joints of Terrazzo/ cement conc. Floor 40 mm wide and 4 mm thick.		74	Rmt.
49	40	Providing and fixing 1st quality ceramic glazed tiles conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in all colour , shades except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg per Sqm. Incl. pointing in white cement mixed with pigment of matching shade complete.		14	Sqm
50	41	Providing and laying 75 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge		600	Sqm
51	42	Providing & fixing G.I. pipes complete with G.I fittings and clamps, including cutting and making good the walls etc. Exposed on wall 15 mm dia nominal bore (Medium) (Internal Work)		15	Rmt.
52	43	Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) 20 mm dia. nominal bore		120	Rmt.
53	44	Providing and fixing G.I union in G.I pipe including cutting and threading the pipe and making long screws etc complete.
54	44.1	15 mm nominal bore		4	Each
55	44.2	20 mm nominal bore		12	Each
56	45	Providing & fixing tank connecting nippltecomplete
57	45.1	20 mm dia nominal bore (Medium) (External work)		5	Each
58	45.2	15 mm dia		4	Each
59	46	Providing and fixing ball valve (brass) of approved quality complete
60	46.1	20 mm nominal bore		5	Each
61	46.2	15 mm nominal bore		4	Each
62	47	Providing & fixing on wall face unplasticised- Rigid P.V.C rain water pipe confirming to I.S – 13592 type –A incl. jointing with seal ring confirming to I.S- 5382 leaving 10 mm gap for thermal expansion
63	47.1	75 mm dia		122	Rmt.
64	47.2	110 mm dia		46	Rmt.
65	48	Providing & fixing on wall face un- plasticized- PVC moulded fittings/ accessories for un plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion Coupler
66	48.1	75 mm dia		8	Each
67	48.2	110 mm dia		5	Each
68	49	Providing & fixing on wall face un- plasticized- PVC moulded fittings/ accessories for un plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion Bend
69	49.1	75 mm dia		30	Each
70	49.2	110 mm dia		14	Each
71	50	Providing & fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes confirming to IS:13592 type A including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion single Tee with doors
72	50.1	110x110x110 mm		5	Each
73	50.2	75x75x75 mm		5	Each
74	51	Providing & fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes confirming to IS:13592 type A including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion Shoe (Plain) 75 mm dia		24	Each
75	52	Providing & fixing white vitreous china pedestal type water closet (European type WC pan) with seat and lid 10 litre low level white PVC flushing cistern, including flush pipe with manually controlled device (handly lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required WC pand with ISI marked white solid plastic seat and lid.		4	Each
76	53	Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous ChinaWash basin size 550x400 mm with a pair of 15 mm C. P. brass without pillar taps		6	Each
77	54	Providing and fixing white vitreous china pedestal for wash Basin completely recessed at the back for the reception of pipes and fittings. (Hindware / Cera/Parryware make)		6	Each
78	55	Providing & fixing C.P. brass angle valve for basin mixer & geyser points of approved make conforming to IS: 8931. 15 mm nominal bore.		20	Each
79	56	Providing and fixing C.P brass long nose bib cock of approved quality confirming to IS standards and weighing not less than 810 grams 15 mm nominal bore.		12	Each
80	57	Providing & fixing C.P brass bib cock of approved quality confirming to IS 8931: 15 mm nominal bore. (Parry ware, Cera, etc).		2	Each
81	58	Providing and fixing C.P brass close hole basin mixer pillar tap of approved quality and make weighing not less than 1.970 kg 15 mm nominal bore of standard back type.		12	Each
82	59	Providing & fixing CP brass jet		4	Each
83	60	Providing & fixing CP brass towel rod		3	Each
84	61	Providing & fixing CP brass towel ring		3	Each
85	62	Providing & fixing CP brass shelf		3	Each
86	63	Providing & fixing CP brass soap dish		6	Each
87	64	Providing & fixing CP brass gratings		20	Each
88	65	Providing & fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.		5	Each
89	66	Providing & fixing P.V.C waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipes 32 mm dia.		10	Each
90	67	Providing and fixing unplasticised PVC connections pipe with brass unions 45 cm length 15 mm nominal bore.		30	Each
91	68	Providing & placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank (Sintex, Electroplaste Star, Lotous or equivalent having valid ISI License). (1000 ltr capacity)		5000	Ltr.
92	69	Providing & fixing CP shower complete		2	Each
93	70	Const. of manholes of internal size 30x30x30 cm		4	Each
94	71	Providing & fixing electric motor 1/2 H.P		2	Each
95	72	Carriage of material by M.T incl loading/unloading & stacking complete
96	72.1	Sand av lead 102 km		114	Cum
97	72.2	Stone agg below 40 mm nominal size av lead 53 km		200	Cum
98	72.3	Stone av lead 1 km		12	Cum
99	72.4	Bricks av lead 62 km		27003	No.

Construction . Of Balance Work Of Phc Mongri . ( Udhampur ) Pl . Refer To Boq, Udhampur-Jammu And Kashmir

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us