| 1 | 1 | Supply and Installation of Street Light poles with LED fittings and LT Distribution Panel | | | |
|---|
| 2 | 1.01 | Supply and Installation of Outdoor 25Watt LED street light (Die cast powder coated enclosure with structured LED arrays and IP65/66 protectionand) along with all the accessories required for installation. | item1 | 21 | No |
|---|
| 3 | 1.02 | Supply and Installation of Outdoor IP65 Wall Mounting Gate Light Luminaries, 20W LED with Big doom along with all the accessories required for installation. | item2 | 2 | No |
|---|
| 4 | 1.03 | Supplying and laying of the 3 Core x 2.5 mm2 one length Copper Armoured PVC insulated/PVC sheathed XLPE power cable ammended to IS 7098(Part 1) 1988 in ground. Job includes earth excavation, sand cushioning, protective covering with bricks and refilling the trench with excavated earth. (from PH to Security room) | item3 | 330 | Mtr |
|---|
| 5 | 1.04 | Supplying and laying of the 2 Core x 2.5 mm2 one length Copper Armoured PVC insulated/PVC sheathed XLPE power cable ammended to IS 7098(Part 1) 1988 in ground. Job includes earth excavation, sand cushioning, protective covering with bricks and refilling the trench with excavated earth. (from PH to street light pole) | item4 | 540 | Mtr |
|---|
| 6 | 1.05 | Supply and fixing of of 2.5 Sqmm Cable gland along with all the accessories required for installation. | item5 | 44 | No |
|---|
| 7 | 1.06 | Supply and Installation of 3\" Dia, 4 meter GI pole (as per drawing) alongwith applying 1 coat primer and 2 coat aluminium paint. | item6 | 21 | No |
|---|
| 8 | 1.07 | Supply and Installation of Single Arm Bracket (As per drawing) alongwith applying 1 coat primer and 2 coat aluminium paint. | item7 | 21 | No |
|---|
| 9 | 1.08 | Supply and fixing of SMC Pole mounted Junction Box with side hinged door, IP55, GSJB 2014 along with all the accessories required for installation. Diamention 200 x 140 x 95 (21 Nos for street light pole & 1 No for gate Light) | item8 | 22 | No |
|---|
| 10 | 1.09 | Supplying and Installation of 6A 2 pole MCB 'C' curve along with all the accessories required for installation in junction box. | item9 | 22 | No |
|---|
| 11 | 1.1 | Supplying and Laying of PVC Copper cable 3 core 1.5sqmm (street light Junction box to Light fitting) | item10 | 100 | Mtr |
|---|
| 12 | 1.11 | Supplying and fixing of 3 Inch PVC Pipe along with accessories including cutting in the RCC road and making good the same with RCC material. | item11 | 15 | Mtr |
|---|
| 13 | 1.12 | Base of Streetlights: Earthwork Excavation(0.6 x 0.6 x 0.5m) for the foundation of steeetlight, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Concrete Work (0.6 x 0.6 x 0.5m) for the foundation with Post pipe placed in concrete inclusive of materials, Brick Work (0.45 x 0.45 x 0.45m) for post base and placing of pipes for cable entry, Plastering Work (4 x 0.45 x 0.45) +(0.45 x 0.45) for post base and Painting Work applying 1 coat White primer Paint and 2 coat Synthtic enamel Red Paint. (4 x 0.45 x 0.45) +(0.45 x 0.45) | item12 | 21 | Each |
|---|
| 14 | 1.13 | Supply and installation of Water Pump Mono block 1 HP including 1HP Starter with Panel Box with complete accessories such as Voltmeter, Ammeter, provision for MCB, 16A SP MCB, Indication Lamp, Start & Stop panel buttons, etc., and along with all the accessories required for installation. | item14 | 1 | No |
|---|
| 15 | 1.14 | Supply, Installation and testing of LT Distribution panel, fabriated out of 16SWG CRCA Sheet not less than 2mm thick, powder coated, dust/vermin proof, compartmentalized with hinged doors, one incomer, 5 outgoings, following switch gear and all the accessories required for installation. E.B INCOMER: Consisting of the following 1.200A, 4Pole, MCCB - 1 No 2.R,Y,B Phase Indication Lamps (LED Type) OUT-GOING FEEDERS: Consisting of the following 1.Single Phase Metering Feeders: 5 Nos. 2.32A,Kit-Kat Fuse Re-wirable type - 5 Nos 3.16A, Neutral link - 5 no. 4.32A,2Pole,10kA, MCB - 5 Nos | item15 | 1 | LS |
|---|
| 16 | 1.15 | Supply, Installation and testing of LT Distribution panel, Fabriated out of 16SWG CRCA Sheet not less than 2mm thick, powder coated, dust/vermin proof, compartmentalized with hinged doors, one incomer, 2 outgoings , following switch gear and all the accessories required for installation. E.B INCOMER: Consisting of the following 1.200A,Kit-Kat Fuse Re-wirable type - 3 nos. 2.200A, Neutral Link - 1 no. 3.200A, 4Pole, MCCB - 1 No 4.Main ON/OFF switch (SFU) HRC fuse 200A / 415. 5.Digital VAF(Multifuction) Meter along with necessary CT & PT. 6.R,Y,B Phase Indication Lamps (LED Type) 7.25kA, 4Pole, Surge Protector - 1 no. OUT-GOING FEEDERS: 1.63A,4Pole,10kA, MCB - 2 nos. | item16 | 1 | LS |
|---|
| 17 | 1.16 | Dismantaling of Old panel Board, old street light poles. | item18 | 1 | LS |
|---|
