Military Engineer Services-MES has published Special Repairs To Fencing , Gate And Flooring Of Rcc Overhead Tanks And E/M Installation In Army Area Udaipur. Submission Date for this Tender is 15-07-2021. Flooring Work Tenders in ARMY AREA UDAIPUR Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Jul-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-07-2021 |
| Name of Work: SPECIAL REPAIRS TO FENCING, GATE AND FLOORING OF RCC OVERHEAD TANKS & E&M INSTALLATON IN ARMY AREA UDAIPUR | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Material and Labour for Surface excavation of soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out | 300 | Sqm | |
| 2 | 2 | Excavating over areas, n exc 1.5 m deep and getting out Soft/disintgrated | 50 | Cum | |
| 3 | 3 | Removing excavated soil to a distance not exceeding 50 metre and depositing where directed, at a level n.exc 1.5m above the starting point, complete all as specified. | 40 | Cum | |
| 4 | 4 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site of work as directed by the Engr-in-Charge.\n | 8 | Cum | |
| 5 | 5 | Dismantling posts or struts embedded in any surfaces (natural, concrete, masonary etc.) and of any description, any section, taking out embedded portion and making good to disturbed ground surface , complete all as specified & directed by Engineer-in-Charge.\n | 200 | RM | |
| 6 | 6 | Dismantling of chain link fencing of any description complete all as specified.\n | 200 | Sqm | |
| 7 | 7 | Excavating in post holes (or similar holes) each n.exc0.5cum, getting out in soft/loose soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm thick and removing surplus soil to a distance n.exc.50m and making good surface, complete all as specified.\n | 60 | Each | |
| 8 | 8 | Material & labour for PCC 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation filling and mass concrete of post holes, complete all as specified.\n | 4 | Cum | |
| 9 | 9 | Material and labour mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. | 160 | Kg | |
| 10 | 10 | Material and labour mild steel TMT bars 6 mm dia and over up to and including 10mm dia, cut to length, bent to shape required including cranking, bending, as in stirrups, spacers and binders, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and in stirrups, spacers etc complete all as specified and as directed. | 40 | Kg | |
| 11 | 11 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work rough finished surface of concrete complete all as specified and directefd. | 4 | Sqm | |
| 12 | 12 | Use and waste of form work to sides of columns, post, pillar etc. for , rough finished surface of concrete, complete all as specified and directed | 16 | Sqm | |
| 13 | 13 | Material and labour for providing reinforced cement concrete (design mix) M-25, using 20mm graded mechanically crushed stone aggregate as in fdn and columns, pillars, piers, post and struts, complete all as specified. | 3 | Cum | |
| 14 | 14 | Supply and Fixing Rolled mild steel Fe-290 (Gde E-165) in framed work as in gate of angle or other section including gusset plate , steel sheeting , pintal hinges and locking arrangement complete. | 300 | Kg | |
| 15 | 15 | Supply and Fixing Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; Framing over fencing post with welded to each post, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work complete all as specified and directed. \n | 209 | Kg | |
| 16 | 16 | Supply & fixed mild steel, rolled sections(channel, angle or tee sections) fixed independently cut to ordinary length as in fencing post or struts in fencing etc. including cutting tops to shape as required , drilling holes, notching for wire etc. including flat iron fillets with nuts & bolts for securing chain link fencing including all necessary drilling, bolting or riveting etc complete all as specified and directed. | 1150 | Kg | |
| 17 | 17 | Supply & fixing G.I. chain link fencing in angle iron post and dia of wire 3.15 mm thick, size of mesh 50x50mm, complete all as specified & directed. \n | 1400 | Kg | |
| 18 | 18 | Supply and fixed for galvanized 2 strand, steel barbed wire, 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with & provision of galvanized mild steel wire, staples or steel pins etc (each line of wire to be measured), complete all as specified.\n | 200 | Kg | |
| 19 | 19 | Material and Labour for steel screw bolts, machine made, dia of neck 11 to 15mm with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 5 cm and not exceeding 10cm long, complete all as specified and directed.\n | 22 | Kg | |
| 20 | 20 | Material and Labour for mild steel round bars 6mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns, hooking ends and binding with mild steel (annealed) wire not less than 0.9mm dia, complete all as specified.\n | 250 | Kg | |
| 21 | 21 | Material and Labour for two coats of synthetic enamel paint on steel surfaces over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified. | 50 | Sqm | |
| 22 | 22 | Material and Labour for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base/mass concrete and finished the top surface even and fair complete all as specified. | 32 | Cum | |
| 23 | 23 | Material and labour for Brick work with sub class ‘B’ bricks (Except Bricks), straight or curved on plain exceeding 6 metre mean radius, built in cement mortar (1:6) , complete all as specified. | 2 | Cum | |
| 24 | 24 | Material & labour for machine Pressed precast concrete interlocking paver block rubberised moulded any shape & size conforming to IS- 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement & pigment over and including average 40 mm thick sand cushioning complete all as specified. | 320 | Sqm | |
| 25 | 25 | Material and Labour for pre polished machine cut Kota stone slab flooring and skirting, treads, riser 18-22 mm thick over and including 20 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab. | 100 | Sqm | |
| 26 | 26 | Material & labour for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones, side of interlocking tiles etc complete all as specified and directed. | 3 | Cum | |
| 27 | 27 | Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces or stone walls in cement mortar 1:4 finished even and fair, complete all as specified. | 30 | Sqm | |
| 28 | 28 | Material and Labour for one coat painting to old angle iron fencing post, steel gates and chian link fencing including preparation of old painted steel surface etc complete all as specified and directed. | 1010 | Sqm | |
| 29 | 29 | Supply and Fixing PVC (SWR) vent cowl of Dia 110mm over under ground sump complete all as specified and directed by Engr-in-charge | 20 | Each | |
| 30 | 30 | Supply and Fixing Cast Steel Gate Valve Class-150 (Flanged) Design Standard BS EN ISO 10434/API 600 Bolted Bonnet,Outside Screw,Yoke Type,Rising Stem With Handwheel Operated Flanged end as per ASME b 16.5 Class-150 with Pressure rating of Shell 31kg/cm2,Rating of Seat Pressure 21 Kg/Cm2 And Maximum Working Temp 425 degree C Suitable for Fresh Water supply in iron pipe and repairs with suitable size of MS nut bolts in pipe of size 150 mm. \n MAKE : ZOLOTO CAT PART NO -1077/ Kirloskar | 10 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
