Military Engineer Services-MES has published 8936/Nit 26/21-22 Repair To Flooring , Plastering , Plinth , Chajjas , Shaft Etc . In Md Accn ( Peeru Singh Enclave And Shivaji Enclave ) At Bathida Mil Stn Repair To Flooring , Plastering , Plinth , Chajjas , Shaft Etc . In Md Accn ( Peeru S. Submission Date for this Tender is 24-07-2021. Civil Work Tenders in GE NORTH BATHINDA MIL STN Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Jul-2021 | BoQ and tender pages | BOQ | 17-07-2021 |
| 2 | 17-Jul-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-07-2021 |
| Name of Work: REPAIR TO FLOORING, PLASTERING, PLINTH, CHAJJAS, SHAFT ETC. IN MD ACCN (PEERU SINGH ENCLAVE AND SHIVAJI ENCLAVE) AT BATHIDA MIL STN | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 0 | SCHEDULE 'A' \nB/R Works | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1 | Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar in any description including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge. | 2 | Cubic Metre | |
| 3 | 2 | Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.\n | 2 | Cubic Metre | |
| 4 | 3 | Demolition of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from the site to a distance not exceeding 100 metre and deposited as directed complete all as directed by Engr-in-Charge | 2430 | Square Metre | |
| 5 | 4 | Taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each and refixing in same opening after necessary easing, adjustments, minor repairs etc all as specified and as directed by Engineer-in- charge. | 85 | Each Leaf | |
| 6 | 5 | Resecuring and easing & ajdjusting without taking down shutters of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each including all fittings complete all as specified and as directed by Engineer-in- charge. | 120 | Each Leaf | |
| 7 | 6 | Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. | 450 | Square Metre | |
| 8 | 7 | Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (screed) in cement mortar (1:4) including making good excess taking down plaster area (above skirting tile ) complete all as specified and directed by Engineer-in-Charge. | 40 | Square Metre | |
| 9 | 8 | Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. | 1210 | Square Metre | |
| 10 | 9 | Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (screed) in cement mortar (1:4) including making good excess taking down plaster area (above skirting tile ) complete all as specified and directed by Engineer-in-Charge. | 110 | Square Metre | |
| 11 | 10 | Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick square or rectangular area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. | 280 | Square Metre | |
| 12 | 11 | Material and labour for Glazed ceramic coloured tiles of size 300mmx 200mm, 7mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (rendering) in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. | 260 | Square Metre | |
| 13 | 12 | Material and labour for machine cut 18 to 22 mm thick, Kota stone slab (size of slab not less than 550x550mm) as in flooring, laid over and including 15 mm thick bedding layer in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing /grinding (mirror finish) and polishing by machine, including machine cutting to make it square or rectangular as per site complete all as specified and as directed by Engineer-in-Charge. | 80 | Square Metre | |
| 14 | 13 | Dismantling of stone slab, bricks, PCC tiles, interlocking tiles laid flat of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed in any mortar including removing rubbish material from the site including taking out existing fine sand cleaning the surface complete all as specified and as directed by Engineer-in-charge. | 232.5 | Ten Square \nMetre | |
| 15 | 14 | Material and labour 18-20mm thick any colour of marble work other than black and white marble (table rubbered and polished) in cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to mortar the colour other than white and black, including 15mm thick screed bedding in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. | 55 | Square Metre | |
| 16 | 15 | Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform/cooking plateform or as directed, including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge. | 20 | Square Metre | |
| 17 | 16 | Material and labour for moulding the edges half round on exposed side (Rounding to edges of stone slabs one edge) of granite/marble as in kitchen shelf, cooking platform, WHB counter shelf, steps, and other similar situations etc complete all as specified and directed by Engineer-in-Charge. | 95 | Running Metre | |
| 18 | 17 | Supply & fixing 20 cm x 20 cm x 25 mm thick chequered cement concrete tiles as in floor/path, set, jointed and pointed in neat cement slurry with grey cement and no pigment, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge. | 1010 | Square Metre | |
| 19 | 18 | Supply and fixing 60 mm thick (M-35 grade) precast interlocking tile/paving block factory casted (made by using PVC paver mould / Rubber paver moulds on Vibrating Table Machine) using grey cement and no pigment, shape haxagon / trigular / zigzag / I-shaped etc, as directed, prepolished & preglazed, specification as per relevant IS, having compressive strength not less than 350 Kg/ Sqcm, laid over sand upto required thick layer and filling the interstices etc complete all as specified and as directed by the Engineer-in-Charge.\nNote : - (i) Sand for filling shall be measured & paid separately as Supply only but labour for spreding leveling shall be included in the unit rate of this item) | 1240 | Square Metre | |
| 20 | 19 | Supply only Fazilka/Zera (or any other approved sources) fine sand without silt for filling under interlocking tiles and the interstices etc complete all as specified and as directed by the Engineer-in-Charge. | 31 | Cubic Metre | |
| 21 | 20 | Material and labour for 75mm thick cement concrete ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed by Engineer-in-charge. | 350 | Square Metre | |
| 22 | 21 | Material and labour for PCC (1:3:6), type C-1 using 20 mm graded stone aggregate as in coping/ kerb stone, packing around interlocking paver blocks, chequred tiles complete all as specified and as directed by Engineer-in-charge. | 11 | Cubic Metre | |
| 23 | 22 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from the site to a distance not exceeding 100 metre and deposited as directed complete all as directed by Engr-in-Charge | 12.5 | Cubic Metre | |
| 24 | 23 | Material and labour for 75mm thick cement concrete ( 1:3:6), type C-2 using 20 mm graded stone aggregate as in plinth protection, including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. | 160 | Square Metre | |
| 25 | 24 | Material and labour for 50mm thick cement concrete (1:2:4), type B-1 using 20 mm graded stone aggregate as in flooring, flooring of sewage tank etc, and surface finished even & smooth without using extra cement including necessary form work complete all as specified and as directed by Engineer-in-charge. | 10 | Square Metre | |
| 26 | 25 | Supply & fixing 3mm thick, 22mm wide glass dividing strips inserted in position to the required design/ pattern all as specified & directed by Engineer-in- charge | 15 | Running Metre | |
| 27 | 26 | Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. | 1950 | Square Metre | |
| 28 | 27 | Material and labour for rendering/plastering appx 15mm thick (matching with existing plaster thickness) in cement mortar (1:6) on old brick or concrete surfaces of walls/pillars /cornices in patches (patch size upto 1.5 Sqm each) matching with existing, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. | 310 | Square Metre | |
| 29 | 28 | Material and labour for rendering/plastering appx 10mm thick (matching with existing plaster thickness) in cement mortar (1:3) on any face of ceiling in patches matching with existing, finished fair and even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. | 180 | Square Metre | |
| 30 | 29 | Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick walls or concrete surfaces (external surface), finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. | 1460 | Square Metre | |
| 31 | 30 | Material and labour for preparing newly plastered and newly plaster in patch works on surface of ceiling by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash complete all as specified & directed by Engineer-in- charge | 180 | Square Metre | |
| 32 | 31 | Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other means, and preparing the surfaces smooth by applying white cement based putty to make the surface even and smooth by using sander machine (with provision of dust sucking) upto entire satisfaction of Engineer-in-charge, and after preparing the surfaces applying two coats of oil emulsion distemper (washable), as approved tint/colour by using paint roller brush complete all as specified and as directed by Engineer-in-Charge. | 310 | Square Metre | |
| 33 | 32 | Material and labour for preparation of new plastered surface and newly plaster in patch works on surface of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying two coats of cement base paint as per approved tint/colour with using paint brush complete all as specified and as directed by Engineer-in-Charge. | 1460 | Square Metre | |
| 34 | 33 | Material and labour for Preparation of new surfaces concrete of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified & directed by Engineer-in- charge. | 25 | Square Metre | |
| 35 | 34 | Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate and including removing rubbish material from site and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-charge | 2 | Cubic Metre | |
| 36 | 35 | Material and labour for reinforced cement concrete (1:2:4) (nominal mix) type B-0 using 12.5mm graded stone aggregate as in chajjas, lintel etc. complete all as specified and as directed by Engineer-in-Charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule. | 2 | Cubic Metre | |
| 37 | 36 | Material and labour for mild steel TMT bars 6 mm to 8mm dia and over, cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. \n(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) | 40 | Kilogram | |
| 38 | 37 | Form work to chullah hoods, chajjas, trough and similar items including edges rough finished flat surfaces and give rough finished of concrete surfaces including all necessary scafolding /shuttering upto three storey complete all as specified & directed by Engineer-in- charge. | 35 | Square Metre | |
| 39 | 38 | Material and labour for rendering 5mm thick in cement mortar 1:3 over 10mm thick additional setting / floating coat in cement mortar 1:4 on concrete surfaces of wall, chajjas, beams, ceiling etc. surface finished even and smooth without using extra cement complete all as specified & directed by Engineer-in- charge. | 45 | Square Metre | |
| 40 | 39 | Material & Labour for 100 mm dia cast iron floor trap with CP grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate including taking out old complete all as specified and directed by Engineer-in-Charge. | 15 | Each | |
| 41 | 40 | Supply and fixing 100mm size CI gully traps, square or round mouthed, type 'P' or 'S' complete all as specified and as directed by Engineer-in- charge. | 7 | Each | |
| 42 | 41 | Material & Labour for 100 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears, laid in trenches or in floor and jointing with cement mortar including dismantling/taking out old pipe complete all as specified and as directed by Engineer-in- charge. | 35 | Running Metre | |
| 43 | 42 | Supply & fixing 100mm bore cast iron bends (any radius)/elbo, diminishing pieces or tapers (larger bore measured) with oval access door fixed with cement joints complete all as specified and as directed by Engineer-in- charge. | 25 | Each | |
| 44 | 43 | Supply & fixing 100mm bore cast iron cowl complete all as specified and as directed by Engineer-in- charge. | 10 | Each | |
| 45 | 44 | Supply & fixing 100mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with stack clamps made out of FI 50x5mm and 16mm dia round iron stay (interval of 1m) including nut bolt and PCC work, complete all as specified and as directed by Engineer-in- charge. | 25 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
