Water Supply Maintenance And Repairing In Ward No. 59 And 61
Tender Value
2.21 Lakhs
Estimated cost
Bid Submission
02 Jul 2021
0 days left
EMD
2218
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
TOWN HALL AURANGABAD → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Water Supply Maintenance And Repairing In Ward No. 59 And 61
BOQ
| Sl. No. | Item Description |
| 1 | Item No. 1 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 MMJP/DSR/2019-20/Page no.33 I.No.1 |
| 2 | Item No. 2 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. roadincluding removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 MMJP/DSR/2019-2020/ Page No.33 I.No.3 |
| 3 | Item No. 3 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road by all means including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 MMJP/DSR/2019-2020/ Page No.33 I.No.5 |
| 4 | Item No. 4 Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 MMJP/DSR/2019-2020/ Page No.34 I.No.7 |
| 5 | Item No. 5 Excavation for foundation / pipe trenches in slush muddy / marshy / slushy/ soil including use of poclain labour for dewatering during execution including removing the excavation material upto etc. complete. |
| 6 | Item No. 6 Dewatering the excavated trenches and pools of water in the pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.MJP/DSR/2019-2020/Page no.35 I.no.14 |
| 7 | Item No. 7 Providing and Supplying Asbestos Cement Pressure Pipes manufactured and tested as per ISO-160 standards of following class and diameter in standard lengths including cost of all taxes (Central and local), insurance,railway freight, inspection charges,unloading from railway wagon, loading into truck, transporting to departmental store/site, unloading, stacking etc. completeMJP/DSR/2012-2013/Page no.57. I.no. 1 |
| 8 | A) Class 15 ( Test Pressure 1.5 Mpa) |
| 9 | Item No. 8 Providing and supplying C.I.detachable joints suitable for A.C. pressure pipes manufactured as per IS- 1538 / 1993 standards of following class and dimeter including cost ofinsurance, railway freight, inspection charges, unloading from railway wagon, loading into truck, transporting to departmental store, unloading, stacking and cost of rubber rings, nut bolts, excluding GST levied by GOI & GOM in all respect etc. complete. MJP/DSR/2019-2020/Page no. 64I.no.13 |
| 10 | Class 10 /15 |
| 11 | Item No. 9 Providing and supplying ISI standard CI flanged / S & S specials excludingGST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truk, transport to departmental stores,unloading, stacking, etc. complete.C) Plain ended/plain ended branch flanged specials- i) 80 mm dia to 300 mm diaMJP/DSR/2019-2020/ Page no.60, I.No.6 (C) |
| 12 | Item No. 10 ProvidingD.I.Pipes ( push on joints pressure pipes of DIof following class and diameters confirming to the IS specification inclusive cost of jointing materials (rubber gasket of EPDM quality)excludingGST levied by GoI & GoM in all respect includingThird Party Inspection charges of TPI agency approved by MJP including transit insurance, Railway freight, unloading from railway wagon, loading into truck, transportation to departmental store/site of work, unloading, stacking etc. complete as directed by engineer incharge. (IS-8329:2000 for Pipes & IS-158:1969 & IS-12820:1989 or latest edition/revision with amendments for rubber gasket.) DI K-7 grade MJP/DSR/2019-2020/Page no.59 I.No.3 |
| 13 | Item No. 11 Lowering, laying and jointingwith CID joints, A.C. pressure pipes and CI or MS specials of following class and diameters including conveyance from stores to site of works, cost of labour and material, giving satisfactory hydraulic testing, etc. as per ISI code, etc. complete but excluding cost of C.I.D. joints, nut bolts, rubber rings. MJP/DSR/2012-2013/P.No.59I.no. 4 (A) |
| 14 | A) Class 15 ( Test Pressure 1.5 Mpa) |
| 15 | Item No. 12 Lowering, laying and jointing with SBR rubber gaskets C.I.& D.I. pipes of various classes with CI / MS specials of following diameters in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, excluding cost of jointing materials and rubber rings, including labour, etc complete. Note: Only SBR rubber gaskets to be used as per IS- 5382 / 12820MJP/DSR/2019-2020/Page no.58 I.No.2 (a) |
| 16 | Item No. 13 Removing and refixing the half body of Sluice Valvesincluding excavation, refilling, cost of rubber packing, nut bolts, with gate, gland rope, repair by welding etc complete (70 % Rate of laying Sluice Valves ) MJP/DSR/2019-2020/ Page no.130 I.No.4 |
| 17 | Item No. 14 Providing double flanged Sluice Valves confirming to IS- 2906 / 14846 including worm gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.PN-1.0 ( without bypass arrangement)MJP/DSR/2019-2020/Page no.127 I.No.2 (A) |
| 18 | Item No. 15 Providing and fixing water level incdicator upto 5 M height including M.S. enamelled gauge plate 300 mm wide and 3 mm thick etc. complete. |
| 19 | Item No. 16 Lowering laying and jointing in position following C.I. D/F Reflux Valves, Butterfly Valves and Sluice Valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc complete.Sluice Valves MJP/DSR/2019-2020/Page no.130 I.No.4 |
| 20 | Item No. 17 Removing existing cross connection and remaking the same etc complete (70% Rate of making cross connection.) MJP/DSR/2019-2020/Page no.47. I.No.10 |
| 21 | Item No. 18 Checking & Repairing Private Water connection and reconnecting the same etc complete |
| 22 | Item No. 19 Cutting and champhering of pipes of following diameters including cost of all materials and labour involved, etc. complete as directed by Engineer-in-charge. (for all class of pipes)MJP/DSR/2019-2020/Page no.136 I.No.20 |
| 23 | Item No. 20 Providing and supplying Gun metal check nut of following diameter of Sluice Valves as per standard specifications, etc. complete |
| 24 | Item No. 21 Providing and supplying S.S. spindle rod as per standard specifications and suitable for Sluice Valves etc complete. (As Per Market rate ) |
| 25 | Item No. 22 Supply of C.I. Mechanical Compression Collar Coupling suitable for C.I Spun Pipes ( as per IS-1536 /2001) and complete with sealing rubber gasket of SBR, C.I. follower Glands and M.S. nut bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS: 1538 / 1993MJP/DSR/2018-2019/Page no.140 I.No.2 |
| 26 | Item No. 23 ProvidingISI mark G.I. pipe of following class and diameter excluding GSTlevied by GOI & GOM in all respect includinginspection charges, transportation to stores, etc. complete as per IS-1239 / 2004(Note :- One coupler shall be provided with each full length of pipe cost of which is included in rates below) Medium Class.MJP/DSR/2019-2020/Page no.71, I.No.1, (b) |
| 27 | Item No. 24Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line. ( The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores) MJP/DSR/2019-2020/Page no.47 I.No.10 |
| 28 | Item No. 25Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc.complete.MJP/DSR/2019-2020/Page no.36 I.No.15 |
| 29 | Item No. 26Providing and supplyingI.S.I. mark rubber gasket suitable for C.I. or D.I. pipe of all class for tyton joints including inspection charges, transportation upto departmental stores excluding GST levied by GOI & GOM in all respect etc. complete. MJP/DSR/2019-2020/Page no.137 I.No.21 (A) |
| 30 | Item No. 27 Removing and refixing C.I. gland plate including necessary excavtion, refilling etc. complete. |
| 31 | Item No. 28 Providing and Supplying M.S. gland plate including cutting welding and finishing as per required etc. complete. |
| 32 | Item No. 29 Supplying and fabricating valve key & hollow pipe matching to exisiting valve spidle rod and welding with the extended etc. complete. |
| 33 | a) 80 mm dia 200 mm dia S.V |
| 34 | b) 250 mm dia to 500 mm dia S.V |
| 35 | Item No. 30 Repair of valve key matching to existing vlave spindle rod including welding and finishing etc. complete. |
| 36 | a) 80 mm dia 200 mm dia S.V |
| 37 | b) 250 mm dia to 500 mm dia S.V |
| 38 | Item No. 31 Providing and Supplying M.S. clamp with required nos of holes etc. complete. |
| 39 | Item No. 32 Removing and refixing of level indicator with required painting, wire, rope and pully fixing etc. complete. |
AI Tender Summary
Tender Timeline
Jun 25, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 02, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 05, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender