Construction Of Compound Wall At W.No.At Pcmc Open Space At Prabhawati Nagar.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Jul 2021
0 days left
EMD
14667
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
PCMC Parbhani → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Compound Wall At W.No.At Pcmc Open Space At Prabhawati Nagar.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soils of all types sand, gravel and soft murum including removing the building area stackingand spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering (including shoring and strutting ) etc. complete. (Lift upto 1.50 Metre). |
| 2 | Excavation for foundation in hard murum including removing the excavated material upto distance 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) |
| 3 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed.MORTH 305 SSR Item No.2.25 Page No.30 |
| 4 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 5 | Providing & laying in situ cement concrete in M-10 of trap/granite/ quartzite/gnesis metal for foundation and bedding including bailing out water, form work, compacting, finishing if required and curing etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type Mixer, with natural sand.. |
| 6 | Providing and laying in situ cement concrete M-20 of trap/granite/ quartzite/gneisis metal for reinforced cement concretework in foundation like raft, grillages, strip foundation and footings of reinforced cement concrete columns and steel stanchion including bailing out water, form work, compaction and finishing, curing(Excluding steel reinforcement and structural steel) etc. complete.complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type Mixer, with natural sand.. |
| 7 | Providing and casting in situ cment concrete M-20 of trap/granite/ quartzite gneiss metal for reinforced cement concrete columns as per detailed designs and drawings or as directed including centering, formwork, cover block compaction finishing the formed surfaces with cement morter 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) etc. complete.complete, with fully automatic micro processor based PLC with SCADA enabled concrete batch Mix plant(pan mixer), with natural sand.. |
| 8 | Providing and casting in situ cement concrete M-20 of trap/granite/ quartzite gnesis metal for reinforced cement concrete beams and lintels as per detailed designs and drawings, or as directed including, centering, form work, compaction and roughening the surface of special finishing to be provided and curing etc. complete. (Excluding reinforcement and structural steel) etc. complete.complete, with fully automatic micro processor based PLC with SCADA enabled concrete batch Mix plant(pan mixer), with natural sand.. |
| 9 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (a) For TMT Fe 415 steel bars ( If Mild Steel/HYSD steel is to be used prior permission from S.E. should be taken ) |
| 10 | Providing fly ash Brick masonry with conventional / I.S. type fly ash bricks in cement mortar 1:6 in foundations and plinth including bailing out water manually striking joints, raking out joints watering and scaffolding etc. Complete. |
| 11 | Providing sand faced plaster externally in cement mortar using kharsalia/kasaba or similar type of sand, in all positions including base coat of 15 mm. thick in cement mortar 1:4 using water proofing compound at 1 kg. Per cement bag, curing the same of the base than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 10 mm. thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. |
| 12 | Providing and fabricating structural steel work in rolled sections like joints, channels, angles, teeset. As per detailed design and drawing sor as directed including cutting, fabricating, hoisting, erecting, fixing in postion making riveted/ bolted/ welded connections without connecting. |
| 13 | Providing and applying priming coat on concrete/masonary/ Asbestos Cement plastered surfacesincluding scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 14 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S.of approved manufature and of approved colour to he plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc. complete. |
| 15 | Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagnol flats as per the detailed drawing including hinges, pivot block locking arrangements, welding riveting and oil painting of three coats of approved shade weight of gate 35 Kilograms/Smt. |
| 16 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. IRC-67-1977 |
| 17 | Testing OfCompressive Strength Concrete M20 Cubes(Avg of3cubes ) |
| 18 | Royalty Charges of Murum & soling |
| 19 | Royalty Charges of sand |
AI Tender Summary
Tender Timeline
Jun 25, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 14, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender