Construction Of Minor Bridge On Chandikapur Markanda Uprai Wadura Mahimaur To Upto Sh-278 Odr-29 Road At Ch 1/400 Tq.Daryapur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Jul 2021
0 days left
EMD
43000
Bank guarantee accepted
Document Fee
1120
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
DARYAPUR → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Minor Bridge On Chandikapur Markanda Uprai Wadura Mahimaur To Upto Sh-278 Odr-29 Road At Ch 1/400 Tq.Daryapur
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation by mechanical means in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directedetc. complete.Lift upto 1.5 meter |
| 2 | 1.50 to 3.00Mt |
| 3 | Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) |
| 4 | Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) |
| 5 | Providing and laying in situ / ready mix / ready mix M15 CC of trap/ granite /quartzite /gneiss metal for the bottom plugs of wells in the dry condition including compaction and curing wherever necessary etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer)with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) |
| 6 | Providing and laying in situ controlled grade of M15 of trap /granite /quartzite /gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer with natural sand, excluding reinforcement) |
| 7 | Providing and laying in situ / ready mix M-25 controlled reinforced cement concrete of trap metal for raft slab including \"V\" haunches, formwork, scaffolding, compaction by vibrating, finishing curing etc. complete. concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) etc. complete. (excluding reinforcement).a) RCC Grade with reversible drum type mixer/ concrete batch mix plant (pan mixer) . |
| 8 | Providing and filling sand in foundation trenches / below Raft as per drawing and technical specifications etc. complete. (Coarse Sand and Gravel ) |
| 9 | Providing flexible apron of 100 cm thick comprising of loose stone boulders weighing not less than 40 kg beyond curtain wall etc. complete. |
| 10 | Providing and laying in situ / ready mix M-20 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of \"V\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibratingandcuringcomplete,includingplywood/steel formworkcentering(excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 m in followinh manners(a) Height upto 5 M. (With Concrete Mixer)With fine agreegates of required specifications ( VSI sand finely washed etc )i) Height up to 5 m, normal rate.ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.iii) Height 7.50 to 10 m, 7.50 percent extra.iv) Over 10 m Height, add 10 percent extra for every 2.50m rise. |
| 11 | Providing and laying in situ / ready mix controlled M-25 cement concrete ofof trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in CM 1:3 and curing etc complete( Excluding reinforcement)With reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 12 | Providing andlaying insitu/ready mixM-30controlledcementconcrete oftrap/granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing,formwork,centeringandfinishingincementplasterexcludingreinforcement etc. complete. (with fully automatic micro processor based PLC withSCADA enabledconcrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSI sand finely washed etc )i) Height up to 5 m, normal rate.ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.iii) Height 7.50 to 10 m, 7.50 percent extra.iv) Over 10 m Height, add 10 percent extra for every 2.50m rise. |
| 13 | Providing and laying in situ / ready mix M20 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) |
| 14 | Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) |
| 15 | Providing, cutting, bending, hooking, tyingand laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. |
| 16 | Providing & laying Weep holes of 100mm dia.AC/PVC pipes as per drawing for abutment returns,return walls etc complete. |
| 17 | Prividing and fixing pressure relief pipes of 110 mm diametre of PVC as per drawing for R.C.C Raft,galaries returns, abutments, wing wall etc complete. |
| 18 | Providing tar paper bearing including laying in proper position etc. complete. |
| 19 | Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete. |
| 20 | Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material) |
| 21 | Providingand laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete. |
| 22 | Providing and laying filter material underneath pitching in slopes as per drawings and technical specifications etc. complete. |
| 23 | Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications etc. complete. (by stone/boulder) |
| 24 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 1200mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 25 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. |
| 26 | Watering and compacting of embankment formed of materials obtained from the road cutting withina lead of 50 m,not less than97% ofstandardProctordensity afterlaying them in layers of 20 cm. to 30 cm. with vibratory roller. |
| 27 | Construction of granular sub-base by providing close graded material, spreading in uniform layers withmotor grader / Paver on preparedsurface, mixing by mix in place methodwith rotavatoratOMC,andcompactingwithvibratoryrollertoachievethedesireddensity, complete as per clause 401 -- By Mix in Place Method and Grading - II Material |
| 28 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means -GradingI(Using Screening Type A(11.2 mm) Aggregate) |
| 29 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadamspecificationincludingspreadinginuniformthickness,handpackingtoproper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill upthe intersticesof coarse aggregate, watering andcompacting withvibratoryroller tothe requireddensity. By Mechanical Means - Grading II(Using Screening Type B (11.2mm) Aggregate) |
| 30 | Providingandconstructing75mm.thickModified PenetrationMacadam(MPM)road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubbleobtained by blasting) heating and spraying thebitumen of specified grade @ 2 Kilogram/Square Metre, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compactionas per TechnicalSpecificationClause 506 etc. complete.Including picking of existing WBM surface. (VG-30bulkbitumenratesare considered to arrive at rates) |
| 31 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rollingtoachievethedesiredcompactionbutexcludingprime/tackandSealcoat.For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 32 | 9 MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade @ 1.2kg/Sq.m,preparing existing road surface by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete.(VG-30 bulk bitumen rates are considered to arrive at rates) |
| 33 | Providing andfixing informatory sign boardsof size 0.90 x 0.60 m made out of 14 guage Aluminum sheet bondedwith IRC Specified colour ofretro reflective sheeting of Type IV HighIntensityMicro-PrismaticGradeSheeting(HIP)havingpressuresensitive/heat activatedadhesive,IRCSpecifiedcolourretroreflectivecutoutborder&messageshaving pressure sensitive adhesive having border & messages in IRC Specified colour bacKilogramround including on frame of with angle iron frame of size 35 x 35 x 5 mm and two M.S. angle iron post of size65 mm X 65 mm X 6 mm, 3.65 m long,duly paintedwith flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc;fixingtheboardsin1:4:8concreteblockofsize60cmX60cmX75cmincluding transportationetc;complete. AlluminiumsheetTypeIVHighIntensityMicro-Prismatic Grade Sheeting |
| 34 | Basic test of cementi) standard consistancy ii) specific gravity,iii) Soundnessiv) Fineness v) Setting time ( Initial / Final)vi) Compressive test |
| 35 | Basic Test of Course Aggregatei) Water absorption, ii} Specific gravityiii ) impact valueiv) crushing value |
| 36 | ii) Sieve analysis |
| 37 | iii) Abrasion Value |
| 38 | iv) Flakiness index & elongation index |
| 39 | v) Soundness |
| 40 | i) Concrete Mix Design (M-25) |
| 41 | Fine Aggregatei) Fineness modulusii] Silt Content |
| 42 | Compressive Strengthof CC Cube ( Set of 3.00 Cubes ) |
| 43 | Rubblei) Water absorption, ii} Specific gravityiii ) Compressive strengthiv) crushing value |
| 44 | Steel Bar Testing (Upto 16mm ) |
| 45 | Tensile Strength, Preventing elongation, Yield Stress, Wt./Meter, Bend/ Rebend Test, Proff Stress (Above 16mm) |
| 46 | Maxphalt i) Penetration, Softening Point, Flash & Fire Point,Specific Gravity |
| 47 | ii) Viscosity |
| 48 | ii) Extraction Test.( OGC) |
AI Tender Summary
Tender Timeline
Jun 25, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 01, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 02, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender