Construction Of Single Storied Anganwari Centre At Guabari Primary School , 19328260318 Within The Jurisdiction Of Maynaguri Development Block Under Maynaguri Development Block
Tender Value
10.57 Lakhs
Estimated cost
Bid Submission
09 Jul 2021
0 days left
EMD
21146
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
MAYNAGURI → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Single Storied Anganwari Centre At Guabari Primary School , 19328260318 Within The Jurisdiction Of Maynaguri Development Block Under Maynaguri Development Block
BOQ
| Name of Work:CONSTRUCTION OF SINGLE STORIED ANGANWARI CENTRE AT GUABARI PRIMARY SCHOOL, 19328260318 WITHIN THE JURISDICTION OF MAYNAGURI DEVELOPMENT BLOCK UNDER MAYNAGURI DEVELOPMENT BLOCK | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.\na) Depth of excavation not exceeding 1,500 mm | BI01010001010000000000000515BI0100001113 | 21 | Cum |
| 2 | 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation. | BI01010001010000000000000515BI0100001114 | 6.99 | Cum |
| 3 | 3 | With earth obtained by fresh excavation (including\ cost of excavation upto 1,800 mm. depth) from land arranged by the Deptt. within a lead of 100 m. | BI01010001010000000000000515BI0100001115 | 14.4 | Cum |
| 4 | 4 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) | BI01010001010000000000000515BI0100001116 | 13.88 | Cum |
| 5 | 5 | Turfing with sods Furnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by the Engineer including preparation of ground, fetching of sods and watering as per Clause 307 of Specifications for Road & Bridge Works of MoRT&H (5th Revision) | BI01010001010000000000000515BI0100001117 | 72 | Sqm |
| 6 | 6 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand | BI01010001010000000000000515BI0100001118 | 61.04 | Sqm |
| 7 | 7 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches | BI01010001010000000000000515BI0100001119 | 128.5 | Sqm |
| 8 | 8 | Anti termite treatment to bottom surface ( in case of masonry foundation and basements) and the sides (upto a height of 300 mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. area. The work shall be carried out as per specification described in 6.2.1. of code IS- 6313 (part -II) 1981. (Mode of measurment will be the plan area of foundation treated.) | BI01010001010000000000000515BI0100001120 | 32.5 | Sqm |
| 9 | 9 | Cement concrete with graded stone ballast (40 mm size ) excluding shuttering Pakur variety In ground floor 1:4:8 proportion | BI01010001010000000000000515BI0100001121 | 2.44 | cum |
| 10 | 10 | Cement concrete with graded stone ballast (40 mm size ) excluding shuttering Pakur variety 1:3:6 proportion | BI01010001010000000000000515BI0100001122 | 4.46 | cum |
| 11 | 11 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. | BI01010001010000000000000515BI0100001123 | 15.33 | cum |
| 12 | 12 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge | BI01010001010000000000000515BI0100001124 | 133.44 | Sq.m |
| 13 | 13 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4 m (ii JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL | BI01010001010000000000000515BI0100001125 | 1.576 | MT |
| 14 | 14 | Brick work with 1st class bricks in cement mortar (1:6) in foundation and plinth | BI01010001010000000000000515BI0100001126 | 18 | CUM |
| 15 | 15 | Brick work with 1st class bricks in cement mortar (1:6)In superstructure, ground floor | BI01010001010000000000000515BI0100001127 | 25 | CUM |
| 16 | 16 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor | BI01010001010000000000000515BI0100001128 | 21 | Sq.m |
| 17 | 17 | 75 mm thick brick work with 1st class bricks set in sand cement mortar ( 4:1) in ground floor including H.B netting in every alternamte layers. | BI01010001010000000000000515BI0100001129 | 10 | Sq.m |
| 18 | 18 | 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as\nper manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based\npaint to be paid separately).( Chequering not required over concrete or painted surface).\n[Note: - Waterproofing as per item 9, polymer based paint as per item 8 (a) of subhead C of Section (C). | BI01010001010000000000000515BI0100001130 | 10 | Sq.m |
| 19 | 19 | Plaster (to wall, floor, ceiling etc.) with composite mortar of sand,lime and cement including round off or chamfering corners as directed and raking out joints and roughening of concrete surface including throating, nosing and drip course where necessary (Ground floor)20 mm. thick plaster | BI01010001010000000000000515BI0100001131 | 171 | Sq.m |
| 20 | 20 | Plaster (to wall, floor, ceiling etc.) with composite mortar of sand,lime and cement including round off or chamfering corners as directed and raking out joints and roughening of concrete surface including throating, nosing and drip course where necessary (Ground floor)15 mm. thick plaster | BI01010001010000000000000515BI0100001132 | 98 | Sq.m |
| 21 | 21 | Plaster (to wall, floor, ceiling etc.) with composite mortar of sand,lime and cement including round off or chamfering corners as directed and raking out joints and roughening of concrete surface including throating, nosing and drip course where necessary (Ground floor) 10 mm. thick plaster | BI01010001010000000000000515BI0100001133 | 104 | Sq.m |
| 22 | 22 | Labour for Chipping of concrete surface before taking up Plastering work | BI01010001010000000000000515BI0100001134 | 104 | Sq.m |
| 23 | 23 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour In ground floor.\n3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).\nUsing grey ceme 25 mm thick | BI01010001010000000000000515BI0100001135 | 56 | Sq.m |
| 24 | 24 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m | BI01010001010000000000000515BI0100001136 | 23.25 | Sq.m |
| 25 | 25 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals) | BI01010001010000000000000515BI0100001137 | 0.48 | Cum |
| 26 | 26 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm | BI01010001010000000000000515BI0100001138 | 17.58 | Sqm |
| 27 | 27 | Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer?s specification and direction of Engineer-in-Charge | BI01010001010000000000000515BI0100001139 | 10 | m |
| 28 | 28 | Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top,\nbottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in- Charge. | BI01010001010000000000000515BI0100001140 | 3.15 | Sq.m |
| 29 | 29 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floorGrill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. Mtr | BI01010001010000000000000515BI0100001141 | 1.814 | Qntl |
| 30 | 30 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) | BI01010001010000000000000515BI0100001142 | 56 | Each |
| 31 | 31 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark | BI01010001010000000000000515BI0100001143 | 62 | Each |
| 32 | 32 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws (ix) 300 mm long X 10 mm mm dia bolt | BI01010001010000000000000515BI0100001144 | 22 | Each |
| 33 | 33 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complet (ix) 300 mm long X 16 mm mm dia bolt | BI01010001010000000000000515BI0100001145 | 4 | Each |
| 34 | 34 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete (a) With continous plate base (hexagonal/Round rod) | BI01010001010000000000000515BI0100001146 | 26 | Each |
| 35 | 35 | 125mm long wooden buffer block Sal:Malayasian | BI01010001010000000000000515BI0100001147 | 22 | Each |
| 36 | 36 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete (A) UPVC Pipe 110 mm dia | BI01010001010000000000000515BI0100001148 | 6.6 | mtr |
| 37 | 37 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. UPVC Fittings d) Shoe 110 mm | BI01010001010000000000000515BI0100001149 | 2 | Each |
| 38 | 38 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.Bend 87.5 degree ii)110 mm | BI01010001010000000000000515BI0100001150 | 2 | Each |
| 39 | 39 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc Steel window | BI01010001010000000000000515BI0100001151 | 12.96 | Sqm |
| 40 | 40 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc | BI01010001010000000000000515BI0100001152 | 45.71 | Sqm |
| 41 | 41 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessaryTwo coats (with any shade except white) On timber or plastered surface | BI01010001010000000000000515BI0100001153 | 45.71 | Sqm |
| 42 | 42 | two coats white any shade except white On steel or metal surface | BI01010001010000000000000515BI0100001154 | 12.96 | Sqm |
| 43 | 43 | White washing including cleaning and smoothening surface thoroughly | BI01010001010000000000000515BI0100001155 | 275 | Sqm |
| 44 | 44 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification | BI01010001010000000000000515BI0100001156 | 98 | Sqm |
| 45 | 45 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m(a) Area of each tile upto 0.09 Sq.m(ii) Other than Coloured decorative including white | BI01010001010000000000000515BI0100001157 | 3 | Sqm |
| 46 | 46 | Precast pierced concrete jally work as per design and manufacturer's specification including moulding etc. with stone chips and necessary reinforcement shuttering complete including fitting, fixing in position in all floors(b) 37.5 mm thick panels | BI01010001010000000000000515BI0100001158 | 4.32 | Sqm |
| 47 | 47 | Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m\nfor joint filling] | BI01010001010000000000000515BI0100001159 | 9.23 | Sqm |
| 48 | 48 | Galvanised Iron pipe outlet for water with bevelled end at outlet, supplied fitted and fixed complete including painting two coats to the exposed portion © 40 mm dia | BI01010001010000000000000515BI0100001160 | 12 | Mtr |
| 49 | 49 | Hire and labour charges for 100 mm dia bamboo railing on Jhau/Eucalyptus post 1.40 m above G.L and 0.60 m below G.L tied strongly with bamboo railing with coir rope, digging holes for posts in any sort of soil or concrete surface packing the sides etc including cost of carriage of all materials and labour complete including cost of restoration to the damages of the ground to its original condition as per direction of Engineer- in- charge after removing the barricade. (Cost of restoration to be paid separately) (i)Railing with 4 rows\n | BI01010001010000000000000515BI0100001161 | 60 | Mtr |
| 50 | 50 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part I.Payment will be made separetly on the basis of actual height based on relevant\nI.S.Code.\n(i) For 10 users | BI01010001010000000000000515BI0100001162 | 1 | Each |
| 51 | 51 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer 500 litr capacity | BI01010001010000000000000515BI0100001163 | 1 | Each |
| 52 | 52 | Labour for hoisting plastic water storage tank (i)1500 litr capacity (a) Upto 1st storey from G.L | BI01010001010000000000000515BI0100001164 | 1 | Each |
| 53 | 53 | Labour for punching hole in plastic water storage tank up to 50 mm dia | BI01010001010000000000000515BI0100001165 | 3 | Each |
| 54 | 54 | Supplying fitting and fixing bibs cock or stop cock (f) Polythene Bib cock/Stop Cock with inlet ( EMCO/ATLAS or equivalent) i)15 mm | BI01010001010000000000000515BI0100001166 | 10 | Each |
| 55 | 55 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) 15 mm | BI01010001010000000000000515BI0100001167 | 18 | mtr |
| 56 | 56 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) 25 mm | BI01010001010000000000000515BI0100001168 | 14 | Mtr |
| 57 | 57 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) 32 mm | BI01010001010000000000000515BI0100001169 | 12 | Mtr |
| 58 | 58 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing) (ii) 530 mm X 410 mm | BI01010001010000000000000515BI0100001170 | 1 | Each |
| 59 | 59 | Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/ 2009 and I.S. 1729/2002 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately).(ii)100 mm dia (internal) | BI01010001010000000000000515BI0100001171 | 10 | Mtr |
| 60 | 60 | Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately) (A) 'P'Trap (iii)110 mm | BI01010001010000000000000515BI0100001172 | 1 | Each |
| 61 | 61 | Buster pump for uplifiting water from hand tubewell to over head storage tank | BI01010001010000000000000515BI0100001173 | 1 | Each |
| 62 | 62 | Supplying fitting and fixing chech valve ( vertical ) G.M tested to 21 kg per sq. Cm | BI01010001010000000000000515BI0100001174 | 1 | Each |
| 63 | 63 | Supplying fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. Cm ( for water lines only) 40 mm | BI01010001010000000000000515BI0100001175 | 1 | Each |
| 64 | 64 | Labour for boring tube well of required dia by water jet system through any type of soil strata including hire and labour charge for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blank pipe etc fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50mm gap in between the outside of the tube well pipe and the bore. For depth upto 150 metre , 40 mm dia boring etc | BI01010001010000000000000515BI0100001176 | 95 | Metre |
| 65 | 65 | Supply of G.I Pipes of TATA make including necessary sockets 40 mm dia, Medium quality | BI01010001010000000000000515BI0100001176 | 1 | metre |
| 66 | 66 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross elbo nipple, longscrew, reducing socket reducing tee short piece etc fitted with holder bats clamps, including cutting pipes making threads, fitting fixings asrequired jointing materials and two coats of painting with approved paint. in any position above ground ( Payment will be made on the centre linemeasuremnts of total pipe line including all specials no spearate payment will be made for acessories, specials payement for painting will be made seperately | BI01010001010000000000000515BI0100001177 | 69 | each |
| 67 | 67 | 40 mm Supplying PVC strainer of approved make with adapter conforming to I.S. 12818 Specification | BI01010001010000000000000515BI0100001178 | 15 | Metre |
| 68 | 68 | 40 mm dia Supplying fitting and fixing plug of approved make conforming to I.S.Specfication | BI01010001010000000000000515BI0100001179 | 1 | Each |
| 69 | 69 | Supplying fitting and fixing steel cutter piece up to 450 mm long with sockets 40 mm dia | BI01010001010000000000000515BI0100001180 | 1 | Each |
| 70 | 70 | Collecting sample of water for bacteriological and chemical test from andy depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction | BI01010001010000000000000515BI0100001181 | 1 | Ls |
| 71 | 71 | Gephysical investigation of the acquifer by electrologging system with all tools and plants as necessary incuding supply of necessary report | BI01010001010000000000000515BI0100001182 | 2 | Each test |
| 72 | 72 | Supplying fitting and fixing popular maya pump no 6 or Similar for 40 mm dia tube well | BI01010001010000000000000515BI0100001125 | 1 | Each |
| 73 | 73 | Brick work with 1st class bricks in cement mortar (1:6) for water tank placing in Foundation plinth | BI01010001010000000000000515BI0100001126 | 0.5 | cum |
| 74 | 74 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand | BI01010001010000000000000515BI0100001127 | 2.5 | Sqm |
| 75 | 75 | Cement concrete with graded stone ballast (40 mm size) Excluding shuttering Pakur verity | BI01010001010000000000000515BI0100001128 | 0.5 | cum |
| 76 | 76 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and icluding application of cement slurry before flooring works, using cement @ 1.75 K.g /sq.m all complete including all materials and labour 25 mm thick | BI01010001010000000000000515BI0100001129 | 4 | Sqm |
AI Tender Summary
Tender Timeline
Jun 25, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 12, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender