}

Nctps I Se Mi Circle Aoh 21 22 Mpm Dn Reconditioning And Re Fixing Of Hot Air Gate Nctps I Se Mi Circle Aoh 21 22 Mpm Dn Reconditioning And Re Fixing Of Hot Air Gate Assembly Including Dismantling And Insulation Work In Unit I Ii And Iii During The Over, Works-Tamil Nadu

Tamil Nadu Transmission Corporation Limited-TANTRANSCO has published Nctps I Se Mi Circle Aoh 21 22 Mpm Dn Reconditioning And Re Fixing Of Hot Air Gate Nctps I Se Mi Circle Aoh 21 22 Mpm Dn Reconditioning And Re Fixing Of Hot Air Gate Assembly Including Dismantling And Insulation Work In Unit I Ii And Iii During The Over. Submission Date for this Tender is 30-06-2021. Insulation work Tenders in Works Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

28302346
Nctps I Se Mi Circle Aoh 21 22 Mpm Dn Reconditioning And Re Fixing Of Hot Air Gate Nctps I Se Mi Circle Aoh 21 22 Mpm Dn Reconditioning And Re Fixing Of Hot Air Gate Assembly Including Dismantling And Insulation Work In Unit I Ii And Iii During The Over
Open Tender
Indian
Tamil Nadu
Works
30-06-2021

Tender Details

Nctps I Se Mi Circle Aoh 21 22 Mpm Dn Reconditioning And Re Fixing Of Hot Air Gate Nctps I Se Mi Circle Aoh 21 22 Mpm Dn Reconditioning And Re Fixing Of Hot Air Gate Assembly Including Dismantling And Insulation Work In Unit I Ii And Iii During The Overhaul Shutdown Period

Key Value

Document Fees
Refer document
EMD
INR 20800.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: NCTPS-I – SE/MI circle – AOH (21-22) – MPM Dn. – Reconditioning and re-fixing of hot air gate assembly including dismantling and insulation work in unit I,II & III during the overhaul/shutdown period.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Charges for dismantling the wornout hot air gate cylinder, shaft aluminium disc, seals top & bottom flanges, renewal of the damaged parts and assembling the all the above to have pucca open/ close operation without assembly leaks, to withstand a pressure of 7 Kg/cm2, including cost of consumables and T&P’s. 1 8 Nos
2 2 Charges for cutting & removing the old eroded gate seal frame, arranging the new gate seals in orderly and seal welding to form leaf edge seal assembly in the HAG. (Top seal outer 2 Nos. per gate), including cost of consumables and T&P’s. 2 8 set
3 3 Charges for renewal of Top seal inner (2 Nos. per gate), including cost of consumables and T&P’s. 3 8 set
4 4 Charges for renewal of Bottom seals inner (2 Nos. per gate), including cost of consumables and T&P’s. 4 8 set
5 5 Charges for renewal of left & right side seals inner (4 Nos. per gate), including cost of consumables and T&P’s. 5 8 set
6 6 Charges for transportation of Hot air gate assembly’s and required iron & steel from store for fabrication of supports. Provision of temporary supports & frames to facilitate erection as per the site Engineer instruction including temporary supports for mounting 5 Ton capacity chain blocks, for lifting and lowering the gate assembly arrangement and temporary platform etc., Charges for providing the temporary supports and platform supports arrangement for fixing 5 Ton capacity chain blocks – 4 Nos., for mounting and removing the existing hot air gate assembly, including cost of consumables and T&P’s. 6 8 Nos
7 7 Charges for erection of the Hot air gate assembly position as per the site Engineer instruction, including cost of consumables and T&P’s. 7 8 Nos
8 8 Fabrication of new GI/ MS duct assembly with MS angle duct frames, erection and commissioning of fabricated new duct assembly , including cost of consumables and T&P’s 8 120 m2
9 9 Scaffolding for insulation work for the area where the work area is above 5 mtr from the ground or from the approach platform, including cost of consumables and T&P’s. 9 8 Nos
10 10 Dismantling of insulation. Estimate for 10 Sq.mtr, including cost of consumables and T&P’s. 10 120 m2
11 11 Reinsulation, including cost of consumables and T&P’s. 11 120 m2
12 12 Removal of deteriorated G.I sheets and re fixing the new/ same G.I sheets after fabricating to the required contour shape, making grooves and tightening with lock screws (1/4”), including cost of consumables and T&P’s. 12 120 m2
13 13 Removing the GI strips and retainer plates and providing back with new/ same strips and retainer plates, including cost of consumables and T&P’s. 13 120 m2
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail