Special Repair By Providing Widening With Hard-Shouldering And Strengthening Of Road From Gohian Approach Road Km 0 . 00 To 1 . 20 In Jind Distt . ( 6638 )
Tender Value
46.80 Lakhs
Estimated cost
Bid Submission
19 Jul 2021
0 days left
EMD
94000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Narwana → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair By Providing Widening With Hard-Shouldering And Strengthening Of Road From Gohian Approach Road Km 0 . 00 To 1 . 20 In Jind Distt . ( 6638 )
BOQ
| Name of Work: SPECIAL REPAIR BY PROVIDING WIDENING WITH HARD-SHOULDERING AND STRENGTHENING OF ROAD FROM GOHIAN APPROACH ROAD KM 0.00 TO 1.20 IN JIND DISTT. (6638) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Milling on Bituminous Surface: Dismantling of existing damaged Bitumen surface by cold Milling Machine up to any depth and hauling the milled material up to any lead and stacking at nearest recycling Plant site (Based on HSR 17.43.2) | BI01010001010000000000000515BI0100001112 | 113.46 | Cum |
| 2 | 2 | Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge-in mud mortar (HSR 5.6.1) | BI01010001010000000000000515BI0100001113 | 41.7 | Cum |
| 3 | 3 | Brick on end in soil/edging in required pattern with bricks of class designation (HSR 10.36) | BI01010001010000000000000515BI0100001114 | 2300 | Rmt. |
| 4 | 4 | Compaction of Earthwork Compaction of & preparation of sub grade including loosening, levelling of earth 225 mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 3000-2 as per technical clause 305 of MORT&H specifications (HSR 17.5.3) | BI01010001010000000000000515BI0100001115 | 2208 | Sqm |
| 5 | 5 | Excavation for roadwork in soil by mechanical means including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lift and lead as per technical clause 301 of MORT&H specifications (HSR 17.10.1) | BI01010001010000000000000515BI0100001116 | 614.1 | Cum |
| 6 | 6 | Providing & laying 150 mm Granular Sub-Base with Coarse Graded Material - Grading-I (Table:- 400-2) Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.of MORT&H specifications. Grading I material (Based on HSR 17.15.1) Note: - 1.Only crushed metal material should be used. No local earth sand shall be used. The material finer than 425 micron shall have zero Plasticity Index (PI). 2. Materials to be used and operations of manufacturing shall be approved by the engineer. Note: - 1.Only crushed metal material should be used. No local earth sand shall be used. The material finer than 425 micron shall have zero Plasticity Index (PI). 2. Materials to be used and operations of manufacturing shall be approved by the engineer. | BI01010001010000000000000515BI0100001117 | 331.2 | Cum |
| 7 | 7 | Providing, laying 75 mm WBM (G-I) 63 mm to 45 mm (75 mm each layer) , spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications (Based on HSR 17.23.2) Note: - 1.Only crushed metal material should be used. No local earth sand shall be used. The material finer than 425 micron shall have zero Plasticity Index (PI). 2. Materials to be used and operations of manufacturing shall be approved by the engineer. | BI01010001010000000000000515BI0100001118 | 165.6 | Cum |
| 8 | 8 | Providing, laying 75/150 mm WBM (G-II) 53 mm to 22.4 mm (75 mm each layer) , spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications (Based on HSR 17.23.2) Note: - 1.Only crushed metal material should be used. No local earth sand shall be used. The material finer than 425 micron shall have zero Plasticity Index (PI). 2. Materials to be used and operations of manufacturing shall be approved by the engineer. | BI01010001010000000000000515BI0100001119 | 775.05 | Cum |
| 9 | 9 | Providing and laying surface dressing as wearing course in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG - 10 laid on prepared surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 509 of MORT&H specifications:19 mm nominal chipping size, with bitumen (Based on HSR 17.32.1) | BI01010001010000000000000515BI0100001120 | 6325 | Sqm |
| 10 | 10 | Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORT&H specifications (Based on HSR 17.26.2) | BI01010001010000000000000515BI0100001121 | 6325 | Sqm |
| 11 | 11 | Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of crushed stone aggregates of specified grading premixed in a continuous type of hot mix plant of appropriate capacity not less not less than 75 tonne per hour, with bituminous binder VG - 10 @ 1.46 kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications. (Based on HSR 17.33.1) | BI01010001010000000000000515BI0100001122 | 6325 | Sqm |
| 12 | 12 | Providing and laying of premix sand seal coat premixed in continuous type HMP of appropriate capacity not less than 75 tonnes/ hours using specified fine aggregates and penetration grade bitumen @0.68 kg/sqm laid to specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications. (Based on HSR 17.36.3) | BI01010001010000000000000515BI0100001123 | 6325 | Sqm |
| 13 | 13 | Providing and Laying 80 mm thick ISI marked Interlocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 40 over the bed of 30 mm thick fine sand complete in all respect. (HSR 17.69.2) | BI01010001010000000000000515BI0100001124 | 260 | Sqm |
| 14 | 14 | Providing and laying of cement concrete blocks of size 0.450 m x 0.300 m x 0.15 m of cement concrete (C.C) M30 grade and spreading 25 mm thick sand underneath filling joints with sand on existing W.B.M. base as per technical specification clause 1503 (HSR 17.66.1) | BI01010001010000000000000515BI0100001125 | 4.5 | Cum |
| 15 | 15 | Construction of Embankment with approved material deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2, as per technical clause 305 of MORT&H specifications (HSR 17.7) (Use Excavated Earth) | BI01010001010000000000000515BI0100001126 | 491.4 | Cum |
| 16 | 16 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.(HSR 4.14) | BI01010001010000000000000515BI0100001127 | 7.86 | Cum |
| 17 | 17 | Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth. (HSR 10.100.2) | BI01010001010000000000000515BI0100001128 | 7.28 | Cum |
| 18 | 18 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) (HSR 7.20.1) | BI01010001010000000000000515BI0100001129 | 4.04 | Cum |
| 19 | 19 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) (HSR 11.5.3) | BI01010001010000000000000515BI0100001130 | 9.98 | Sqm |
| 20 | 20 | Providing and Laying 600 mm Reinforced cement concrete pipe NP3 prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets 1000 mm dia, as per clause 2900 of MORT&H specifications (HSR 17.61.1) Note:- Contractor shall supply bill of manufacture of pipes. Pipes should bear name of manufacturer and ISI mark along with bill duly valid ISI certificate of manufacturer should be supply. Without these bills certificate no payment shall be released. | BI01010001010000000000000515BI0100001131 | 15 | Rmt. |
| 21 | 21 | Reinforced cement concrete M-25 grade village board of standard design, fixing in position including painting and printing etc. complete as per PWD specifictions, minimum reinforcement 16 kg, Embedded in Group up to 55 cm, in M-15 Concrete foundation 600x700x145 mm, as per Haryana PWD specification. Village Board (HSR 34.27.5) | BI01010001010000000000000515BI0100001132 | 1 | Each |
| 22 | 22 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. (HSR 34.26) Note:- Before start of work the contractor shall give brand , batch no. , manufacturing date of the material to be used and get approved the same from Engineer-In-Charge before use.3 | BI01010001010000000000000515BI0100001133 | 84 | Sqm |
| 23 | 23 | Recovery Items:- The rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. Material obtained from dismantling of existing brick work, bituminous layer have been calculated taking assumption that 80% of theoretical material will be retrieved. The dismantled material can used in any of the item for the work after modification (bringing it to required specifications) after approval from employer. In case it is not possible to use this material on the work, the agency can take away this material. This material can be taken away by the agency at the price quoted by the agency but minimum price to be quoted is limited to reserve price as fixed and mentioned as under:- (i) Good Bricks @ Rs. -5.00 Each | BI01010001010000000000000515BI0100001134 | 3202 | Nos. |
| 24 | 24 | Brick bats @500/- per cum | BI01010001010000000000000515BI0100001135 | 26.69 | Cum |
| 25 | 25 | Bituminous Material @ Rs. 1275.00 Per Cum Note:- All quantities of the above materials have been worked out on the basis of theoretical quantities laid on this road. However, agency may visit site before quoting rates and assess the extent of retrieved material. There shall be no measurement after actual dismantling and if martial after dismantling is found on lesser side, no claim of agency on this score will be entertained and full recovery on the basis of quoted rate and quantity exhibited in the BOQ shall be made. The reserve rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser that reserve price | BI01010001010000000000000515BI0100001136 | 90.77 | Cum |
AI Tender Summary
Tender Timeline
Jun 24, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 19, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 20, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender