Construction Of Anganwadi Centre For L/Daragaon 19327040805 ( Samthar G . P ) Under Ridf Xxv Support Within Kalimpong-L Block .
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Jul 2021
0 days left
EMD
33000
Bank guarantee accepted
Document Fee
1
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Samthar → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Anganwadi Centre For L / Daragaon 19327040805 ( Samthar G . P ) Under Ridf Xxv Support Within Kalimpong-L Block .
BOQ
| Name of Work:Construction of Anganwadi Centre for L/Daragaon 19327040805 (Samthar G.P) under RIDF XXV Support Within Kalimpong-l Block. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Page No. 1 Item No. 2 a Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding Laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimmingthe sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1.2 m | BI01010001010000000000000515BI0100001113 | 17.18 | m3 |
| 2 | 2 | Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm ……. (a) with earth obtaining from excavation of foundation | BI01010001010000000000000515BI0100001114 | 5.67 | m3 |
| 3 | 3 | filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating same by through saturation with water ramming complete including the cost of supply of fine sand | BI01010001010000000000000515BI0100001115 | 21.6 | m3 |
| 4 | 4 | single brick flat soiling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powered earth or local sand | BI01010001010000000000000515BI0100001116 | 55.1 | m2 |
| 5 | 5 | Supplying and laying polythene sheet (150gm/sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches | BI01010001010000000000000515BI0100001117 | 98.64 | m2 |
| 6 | 6 | Cement concrete with graded stone ballast (40 mm size) excluding shuttering,In ground floor and foundation.(a) 1:3:6 proportion in ground floor,1.0x88.80x0.075 = 6.66 m3 | BI01010001010000000000000515BI0100001118 | 5.1 | m3 |
| 7 | 7 | Page No. 26 Item No. 10 (ii).Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. | BI01010001010000000000000515BI0100001119 | 32.52 | m3 |
| 8 | 8 | Page No. 28 tem No. 15 i.Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary),cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(i) Tor steel/Mild Steel | BI01010001010000000000000515BI0100001120 | 5.106 | mt |
| 9 | 9 | Page No. 27 Item No. 12 a Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)\n\n\n | BI01010001010000000000000515BI0100001121 | 327 | m2 |
| 10 | 10 | Brick work with 1 st class bricks in cement mortar (6:1) | BI01010001010000000000000515BI0100001122 | 19.48 | m3 |
| 11 | 11 | 125 mm thick brick work with 1st class brick in cement mortar (4:1) in ground floor | BI01010001010000000000000515BI0100001123 | 14.28 | m2 |
| 12 | 12 | 75 mm thick brick work with 1st class brick set in sand in cement mortar (4:1) in ground floor including HB netting in every alternate layers | BI01010001010000000000000515BI0100001124 | 6 | m2 |
| 13 | 13 | 25 mm damp proof course with cement concrete with stone chips (1:1;5:3) with graded stone aggregate 10 mm nominal size and admixture of water proofing compound…….. Water proofing as per item no. 60 polymer based paint as per item 59(a) of section © | BI01010001010000000000000515BI0100001125 | 11.63 | m2 |
| 14 | 14 | Page No. 165 item No. 3 (iii) c Plaster (to wall, floor, ceiling etc.) with composite mortar of sand, lime and cement including round off or chamfering corners as directed and raking out joints and roughening of concrete surface including throttling, nosing and drip course where necessary (Ground floor).20 mm thick plaster | BI01010001010000000000000515BI0100001126 | 92.91 | m2 |
| 15 | 15 | Page No. 165 item No. 3 (iii) c Plaster (to wall, floor, ceiling etc.) with composite mortar of sand, lime and cement including round off or chamfering corners as directed and raking out joints and roughening of concrete surface including throttling, concrete surface including throttling, nosing and drip course where necessary (Ground floor).15 mm thick plaster | BI01010001010000000000000515BI0100001127 | 73.49 | m2 |
| 16 | 16 | Page No. 165 item No. 3 (iii) c Plaster (to wall, floor, ceiling etc.) with composite mortar of sand, lime and cement including round off or chamfering corners as directed and raking out joints and roughening of concrete surface including throttling, nosing and drip course where necessary (Ground floor).10 mm thick plaster | BI01010001010000000000000515BI0100001128 | 89 | m2 |
| 17 | 17 | labour for chipping of concrete surface before taking up plastering work | BI01010001010000000000000515BI0100001129 | 89 | m2 |
| 18 | 18 | Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips laid in panels as directed and topping made with ordinary or white cement as necessary and marble dust in proportion (2:1) including smooth finishing………… 25 mm thick | BI01010001010000000000000515BI0100001130 | 52 | m2 |
| 19 | 19 | Neat cement punning about 1.5 mm thick in wall , dado, window, floor, drain etc. | BI01010001010000000000000515BI0100001131 | 40.81 | m2 |
| 20 | 20 | Page No. 88 Item No. 1 I Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame | BI01010001010000000000000515BI0100001132 | 0.48 | m3 |
| 21 | 21 | Page No. 112 Item No. 84 iii Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. | BI01010001010000000000000515BI0100001133 | 17.99 | m2 |
| 22 | 22 | Supplying fitting and fixing 30 mm thick both side prelaminated factory made solid panel PVC door shutter consisting of outer frame made out of MS tube of 19 gauge thickness and size 19 mm x 19 mm for styles top and bottom rails MS frame shall have cost of steel primers of approved make and manufacture....... | BI01010001010000000000000515BI0100001134 | 9.9 | m2 |
| 23 | 23 | Supplying fitting and fixing 30 mm thick both side prelaminated factory made solid panel PVC door shutter consisting of outer frame made out of MS tube of 19 gauge thickness and size 19 mm x 19 mm for styles top and bottom rails MS frame shall have cost of steel primers of approved make and manufacture....... | BI01010001010000000000000515BI0100001135 | 3.15 | m2 |
| 24 | 24 | Page No 76.Item No 10(i)M.S. or W.I.Ornamental grill of approved design joints continuously welded with M.S.or W.I.Flats and Bars of windows,railing etc.fitted and fixed with necessary screws and lugs in ground floor. | BI01010001010000000000000515BI0100001136 | 0.27 | qntl |
| 25 | 25 | Supplying fitting and fixing M.S.clamps for door and windows frame made of flat bent bar,end bifurcated with necessary screws etc.by cement concrete (1:2:4) as per direction(cost of concrete will be paid separately) | BI01010001010000000000000515BI0100001137 | 26 | each |
| 26 | 26 | Page No-95,Item No-20 Iron butt hinges of approved quality fitted and fixed with steel screws,with ISI mark.(viii) 100mmx75mmx3.50mm | BI01010001010000000000000515BI0100001138 | 30 | each |
| 27 | 27 | Anodised aluminium barrel/tower/ socket bolt of approved manufactured from extruded section conforming to IS 204/74 fitted and fixed with cadmium plated screws | BI01010001010000000000000515BI0100001139 | 14 | each |
| 28 | 28 | Page No-105,Item No-63 Anodised aluminium Aldrop/Sliding bolts of approved quality manufactured from extruded section conforming to I.S.Specification(I.S.2681/66)fitted and fixed complete. | BI01010001010000000000000515BI0100001140 | 14 | each |
| 29 | 29 | Anodised aluminium D type handle of approved quality | BI01010001010000000000000515BI0100001141 | 14 | each |
| 30 | 30 | Supplying fitting and fixing UPVC pipes A- type and fitting conforming to IS 13592-1992 with necessary clamps nails including making holes in walls etc. and cutting trenches in any soil through masonery concrete structure etc if necessary and mending good damages including jointing with jointing materials (spun,yarn,valamoid/bitumen/M seal etc) complete | BI01010001010000000000000515BI0100001142 | 6.6 | mtr |
| 31 | 31 | Supplying fitting and fixing UPVC pipes A- type and fitting conforming to IS 13592-1992 with necessary clamps nails including making holes in walls etc. and cutting trenches in any soil through masonery concrete structure etc if necessary and mending good damages including jointing with jointing materials (spun,yarn,valamoid/bitumen/M seal etc) complete A) UPVC pipes | BI01010001010000000000000515BI0100001143 | 2 | each |
| 32 | 32 | Supplying fitting and fixing UPVC pipes A- type and fitting conforming to IS 13592-1992 with necessary clamps nails including making holes in walls etc. and cutting trenches in any soil through masonery concrete structure etc if necessary and mending good damages including jointing with jointing materials (spun,yarn,valamoid/bitumen/M seal etc) complete A) UPVC fittings | BI01010001010000000000000515BI0100001144 | 2 | each |
| 33 | 33 | Page N0 162Item N0 7.A Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc steel window | BI01010001010000000000000515BI0100001145 | 16.14 | m2 |
| 34 | 34 | Page N0 162Item N0 7.A Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc paneled door | BI01010001010000000000000515BI0100001146 | 6.72 | m2 |
| 35 | 35 | Page N0 162Item N0 8.a Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary | BI01010001010000000000000515BI0100001147 | 6.72 | m2 |
| 36 | 36 | Page N0 162Item N0 sawasaw Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary | BI01010001010000000000000515BI0100001148 | 16.14 | m2 |
| 37 | 37 | Page N0 162Item N0 8.a Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary | BI01010001010000000000000515BI0100001149 | 1027.8 | m2 |
| 38 | 38 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same throughly (plastered or concrete surface) as per manufacturer's specification | BI01010001010000000000000515BI0100001150 | 106.49 | m2 |
| 39 | 39 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. 30 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor With Sand Cement Mortar | BI01010001010000000000000515BI0100001151 | 3 | m2 |
| 40 | 40 | Supplying and laying chequered tiles of any shade & of approved quality with (1:1:3) cement concrete laid in panels and patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick cement morter (1:3) complete in all respect with all labour and materials | BI01010001010000000000000515BI0100001152 | 5.8 | m2 |
| 41 | 41 | Anti termite treatment to bottom surface in case of masonary foundation and basements and the sides upto a height of 300 emulsion | BI01010001010000000000000515BI0100001153 | 2.44 | m3 |
| 42 | 42 | Hire and labour charges for 75 mm dia bamboo railing on jhau/eucalyplus or other approved timber/bamboo posts1.4 m above GL and .60m below GL including tying strongly with coir ropes and boring holes for posts in ant soil/concrete surface/bituminious surface packing the sides etc..... | BI01010001010000000000000515BI0100001154 | 58 | mtr |
| 43 | 43 | Construction of septoc tamk of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia RCC manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100 mm thick RCC (1:1:5:3) top slap with neat cement finish to the internal surface........ with pakur variety | BI01010001010000000000000515BI0100001155 | 1 | each |
| 44 | 44 | Supplying PVC water storage tank of approved quality with closed top with lid (black) multilayer (A) 500 litre capacity | BI01010001010000000000000515BI0100001156 | 1 | each |
| 45 | 45 | Labour for hoisting plastic water storage tank…. Upto 1500 litre capacity | BI01010001010000000000000515BI0100001157 | 1 | each |
| 46 | 46 | Labour for punching hole in plastic water storage tank upto 50 mm dia | BI01010001010000000000000515BI0100001158 | 3 | each |
| 47 | 47 | Supplying fitting and fixing bibs cock or stop cock | BI01010001010000000000000515BI0100001159 | 10 | each |
| 48 | 48 | Supplying fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI pipes as per IS:1239 (part 1) with all necessary accessories, specials viz. socket bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc....... 15 m | BI01010001010000000000000515BI0100001160 | 18 | mtr |
| 49 | 49 | Supplying fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI pipes as per IS:1239 (part 1) with all necessary accessories, specials viz. socket bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc....... 25 m | BI01010001010000000000000515BI0100001161 | 14 | mtr |
| 50 | 50 | Supplying fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI pipes as per IS:1239 (part 1) with all necessary accessories, specials viz. socket bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc....... 32 m | BI01010001010000000000000515BI0100001162 | 25 | mtr |
| 51 | 51 | Supplying fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding P or S trap (excluding cost of concrete for fixing) | BI01010001010000000000000515BI0100001163 | 1 | each |
| 52 | 52 | Supplying fitting and fixing cast iron soil pipe only conforming to IS 3989/1970 and IS1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc.. | BI01010001010000000000000515BI0100001164 | 10 | mtr |
| 53 | 53 | Supplying fitting and fixing cast iron P or S trap conforming to IS 3989/1970 and 1729/ 1964 including lead joints and painting two coats to the exposed surface. (painting to be paid seperately) | BI01010001010000000000000515BI0100001165 | 1 | each |
| 54 | 54 | Supplying fitting and fixing gunmetal wheel value of approved brand and make tested to 21 kg per sq.cm. (for water lines only)….(v) 40 mm | BI01010001010000000000000515BI0100001166 | 1 | each |
| 55 | 55 | Add 12% GST | BI01010001010000000000000515BI0100001167 | 1 | no |
| 56 | 56 | Add 1% Cess | BI01010001010000000000000515BI0100001168 | 1 | no |
| 57 | 57 | Add 3% Contingency | BI01010001010000000000000515BI0100001169 | 1 | no |
AI Tender Summary
Tender Timeline
Jun 23, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 12, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender