Construction Of Smart Village Office Under Rebuild Kerala Initiative At Kalanjoor Pathanamthittaconstruction Of Smart Village Office Under Rebuild Kerala Initiative At Konni Thazham Pathanamthitta Pcc Rcc Rr Masonry Brick Masonry Plastering Tileing Pa
Tender Value
40.93 Lakhs
Estimated cost
Bid Submission
02 Jul 2021
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Konni Thazham → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Smart Village Office Under Rebuild Kerala Initiative At Kalanjoor Pathanamthittaconstruction Of Smart Village Office Under Rebuild Kerala Initiative At Konni Thazham Pathanamthitta Pcc Rcc Rr Masonry Brick MasonryPlastering Tileing PaintingPlumbing Electrical Furniture Demolishing
BOQ
| Work Name : DETAILED ESTIMATE FOR THE CONSTRUCTION OF VILLAGE OFFICE AT KONNI THAZHAM | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | DETAILED ESTIMATE FOR THE CONSTRUCTION OF VILLAGE OFFICE AT KONNI THAZHAM | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.01 | 2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared | BI01010001010000000000000515BI0100001114 | 396 | sqm |
| 3 | 1.02 | 2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil | BI01010001010000000000000515BI0100001115 | 57.392 | cum |
| 4 | 1.03 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001116 | 19.63 | cum |
| 5 | 1.04 | 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001117 | 39.683 | cum |
| 6 | 1.05 | 7.2.1 : Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001118 | 0.871 | cum |
| 7 | 1.06 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | BI01010001010000000000000515BI0100001119 | 144.329 | sqm |
| 8 | 1.07 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001120 | 209.078 | sqm |
| 9 | 1.08 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | BI01010001010000000000000515BI0100001121 | 50.89 | cum |
| 10 | 1.09 | 5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001122 | 43.107 | cum |
| 11 | 1.1 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001123 | 3448.56 | kilogram |
| 12 | 1.11 | od102156/2020_2021 : Supplying and fixing M .P Tiles on the top of R,C.c roof slab using cement mortar 1:4 including all charges etc complete. | BI01010001010000000000000515BI0100001124 | 27.5 | sqm |
| 13 | 1.12 | 6.26.2A : Brick work with common burnt clay selected F.P.S (non modular ) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 ( 1 cement : 6 coarse sand)above plinth level below floor 2 level | BI01010001010000000000000515BI0100001125 | 60.792 | cum |
| 14 | 1.13 | 6.3.2 : Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):With Modular bricks | BI01010001010000000000000515BI0100001126 | 2.625 | cum |
| 15 | 1.14 | 13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001127 | 199.871 | sqm |
| 16 | 1.15 | 13.7.2 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001128 | 407.582 | sqm |
| 17 | 1.16 | 13.5.1 : 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand) | BI01010001010000000000000515BI0100001129 | 144.878 | sqm |
| 18 | 1.17 | 9.1.3 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated Hollock wood | BI01010001010000000000000515BI0100001130 | 0.262 | cum |
| 19 | 1.18 | 9.9.3.2 : Providing and fixing glazed shutters for door, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. Pressed butt hinges bright finished of required size with necessary screws.30 mm thick | BI01010001010000000000000515BI0100001131 | 10.715 | sqm |
| 20 | 1.19 | 9.95.3 : Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:100x75x4 mm | BI01010001010000000000000515BI0100001132 | 25 | no |
| 21 | 1.2 | 9.95.6 : Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:75x63x4 mm | BI01010001010000000000000515BI0100001133 | 9 | no |
| 22 | 1.21 | 9.76 : Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | BI01010001010000000000000515BI0100001134 | 5 | no |
| 23 | 1.22 | 9.97.3 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm | BI01010001010000000000000515BI0100001135 | 10 | no |
| 24 | 1.23 | 9.100.1 : Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm | BI01010001010000000000000515BI0100001136 | 10 | no |
| 25 | 1.24 | 9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | BI01010001010000000000000515BI0100001137 | 557.356 | kg |
| 26 | 1.25 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001138 | 11.591 | kg |
| 27 | 1.26 | 21.2.2 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | BI01010001010000000000000515BI0100001139 | 0.855 | sqm |
| 28 | 1.27 | 21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness | BI01010001010000000000000515BI0100001140 | 1.14 | sqm |
| 29 | 1.28 | 21.12.2 : Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar | BI01010001010000000000000515BI0100001141 | 2 | no |
| 30 | 1.29 | 21.13 : Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete | BI01010001010000000000000515BI0100001142 | 1 | each |
| 31 | 1.3 | 21.10 : Providing and fixing double glazed hermetically sealed glazing in aluminium window, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. | BI01010001010000000000000515BI0100001143 | 16.4 | sqm |
| 32 | 1.31 | 9.123 : Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogeneous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001144 | 15 | metre |
| 33 | 1.32 | 9.124.1 : Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm, painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (Push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer -in-charge.Non decorative finish | BI01010001010000000000000515BI0100001145 | 5.041 | sqm |
| 34 | 1.33 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001146 | 118.681 | sqm |
| 35 | 1.34 | 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001147 | 40.448 | sqm |
| 36 | 1.35 | 11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001148 | 8.596 | sqm |
| 37 | 1.36 | 8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm | BI01010001010000000000000515BI0100001149 | 2.5 | sqm |
| 38 | 1.37 | 8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work | BI01010001010000000000000515BI0100001150 | 11 | metre |
| 39 | 1.38 | 13.31.1 : Pointing on brick work or brick flooring with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled /Struck or weathered pointing | BI01010001010000000000000515BI0100001151 | 171 | sqm |
| 40 | 1.39 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | BI01010001010000000000000515BI0100001152 | 607.453 | sqm |
| 41 | 1.4 | 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001153 | 607.453 | sqm |
| 42 | 1.41 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001154 | 58.756 | sqm |
| 43 | 1.42 | 13.67.1 : Varnishing with varnish of approved brand and manufacture :Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish | BI01010001010000000000000515BI0100001155 | 171 | sqm |
| 44 | 1.43 | 11.16.3 : Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) :Dark shade pigment using ordinary cement | BI01010001010000000000000515BI0100001156 | 5.16 | sqm |
| 45 | 1.44 | 10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | BI01010001010000000000000515BI0100001157 | 44.401 | kg |
| 46 | 1.45 | 16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001158 | 15.75 | sqm |
| 47 | 2 | PLUMBING WORKS | BI01010001010000000000000515BI0100001159 | ||
| 48 | 2.01 | 17.3.2 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.c. pan with ISI marked black solid plastic seat and lid | BI01010001010000000000000515BI0100001160 | 3 | each |
| 49 | 2.02 | 18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore | BI01010001010000000000000515BI0100001161 | 6 | each |
| 50 | 2.03 | 18.32.1 : Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 \n(1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001162 | 3 | each |
| 51 | 2.04 | 18.34.1 : Constructing masonry chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 \n(1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001163 | 1 | each |
| 52 | 2.05 | 18.35.1 : Constructing masonry chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 grades stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001164 | 1 | each |
| 53 | 2.06 | 17.7.2 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap | BI01010001010000000000000515BI0100001165 | 3 | each |
| 54 | 2.07 | 17.73.2 : Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms | BI01010001010000000000000515BI0100001166 | 3 | no |
| 55 | 2.08 | 18.15.1 : Providing and fixing brass bib cock of approved quality :15 mm nominal bore | BI01010001010000000000000515BI0100001167 | 3 | each |
| 56 | 2.09 | 18.16.1 : Providing and fixing brass stop cock of approved quality :15 mm nominal bore | BI01010001010000000000000515BI0100001168 | 1 | each |
| 57 | 2.1 | 18.65 : Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms. | BI01010001010000000000000515BI0100001169 | 3 | each |
| 58 | 2.11 | 17.32.2 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm | BI01010001010000000000000515BI0100001170 | 2 | each |
| 59 | 2.12 | 18.48A : Providing and fixing rectangular high density polyethylene water storageloft tank with cover, conforming to ISI : 12701, colour of opaque white or asapproved by Engineer-in-charge. The rate includes making necessary holesfor inlet, outlet & over flow pipes. The base support i/c fittings & fixtures fortank shall be paid separately. | BI01010001010000000000000515BI0100001171 | 1000 | Litre |
| 60 | 2.13 | 50.18.7.2.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with claps at 1.00 metre spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 12Kgf/cm2 - Internal work - Exposed on wall | BI01010001010000000000000515BI0100001172 | 40 | metre |
| 61 | 2.14 | 50.18.7.3.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer- in- Charge 25 mm dia 12 Kgf/cm2 - Internal work - Exposed on wall | BI01010001010000000000000515BI0100001173 | 15 | metre |
| 62 | 2.15 | 50.18.7.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall | BI01010001010000000000000515BI0100001174 | 10 | metre |
| 63 | 2.16 | 50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 | BI01010001010000000000000515BI0100001175 | 30 | metre |
| 64 | 2.17 | 50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001176 | 3 | no |
| 65 | 2.18 | 50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow | BI01010001010000000000000515BI0100001177 | 2 | no |
| 66 | 2.19 | 50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend | BI01010001010000000000000515BI0100001178 | 2 | no |
| 67 | 2.2 | 50.18.9.22.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee | BI01010001010000000000000515BI0100001179 | 2 | no |
| 68 | 2.21 | od102554/2020_2021 : Providing and fixing 150 mm silt with C p gratings | BI01010001010000000000000515BI0100001180 | 3 | each |
| 69 | 3 | ELECTRICAL WORKS | BI01010001010000000000000515BI0100001181 | ||
| 70 | 3.01 | 1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC\ninsulated copper conductor single core cable in surface / recessed medium class PVC conduit,\nwith modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS\nPVC insulated copper conductor single core cable etc as required.Group C | BI01010001010000000000000515BI0100001182 | 85 | point |
| 71 | 3.02 | 1.12 : Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single corecable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulatedcopper conductor single core cable for loop earthing as required. | BI01010001010000000000000515BI0100001183 | 50 | metre |
| 72 | 3.03 | 2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door | BI01010001010000000000000515BI0100001184 | 1 | each |
| 73 | 3.04 | 90.11.1.21 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required | BI01010001010000000000000515BI0100001185 | 1 | each |
| 74 | 3.05 | 1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch | BI01010001010000000000000515BI0100001186 | 2 | each |
| 75 | 3.06 | 1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet | BI01010001010000000000000515BI0100001187 | 2 | each |
| 76 | 3.07 | 1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | BI01010001010000000000000515BI0100001188 | 125 | metre |
| 77 | 3.08 | 1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | BI01010001010000000000000515BI0100001189 | 12 | each |
| 78 | 3.09 | 5.19 : Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. | BI01010001010000000000000515BI0100001190 | 20 | metre |
| 79 | 3.1 | 5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. | BI01010001010000000000000515BI0100001191 | 1 | set |
| 80 | 3.11 | 1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) | BI01010001010000000000000515BI0100001192 | 2 | each |
| 81 | 3.12 | 1.28.2 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module | BI01010001010000000000000515BI0100001193 | 2 | each |
| 82 | 3.13 | 1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. | BI01010001010000000000000515BI0100001194 | 4 | each |
| 83 | 3.14 | 1.14.4 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 6 Sq.mm + 1 x 6 sq.mm earth wire | BI01010001010000000000000515BI0100001195 | 75 | metre |
| 84 | 3.15 | 1.14.6 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 16 sq. mm + 1 X 6 sq. mm earth wire | BI01010001010000000000000515BI0100001196 | 30 | metre |
| 85 | 3.16 | 2.14.3 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual\ncurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps | BI01010001010000000000000515BI0100001197 | 1 | each |
| 86 | 3.17 | od102239/2020_2021 : Supplying and fixing 6 A to 32 a rating ,S P M CB and other accessories | BI01010001010000000000000515BI0100001198 | 10 | each |
| 87 | 3.18 | od102572/2020_2021 : Supplying and fixing angle batten with 23 watts C FL and other accessories | BI01010001010000000000000515BI0100001199 | 5 | each |
| 88 | 3.19 | od102582/2020_2021 : Supplying and fixing single tube set ( electronics ) and other accessories | BI01010001010000000000000515BI0100001200 | 45 | each |
| 89 | 3.2 | od102583/2020_2021 : Supplying and fixing 48" Ceiling fan and other accessories | BI01010001010000000000000515BI0100001201 | 12 | each |
| 90 | 3.21 | od102584/2020_2021 : Supply , installation ,testing and commissioning of wall mounted Three phase 4 wire Energy meter with poly carbonate body having range of 10 - 63 A with enclosure made out of powder coated 16 SWG CRCA sheet suitable for fixing in surface / recess with 3 nos of 63 A HRC fuses , 63 A T PN isolator neutral link, its inter connections etc, The enclosure shall have lockable door with glass window and all mounting accessories etc,complete as required . ( Supply of energy meter is under K SE B scope. ) | BI01010001010000000000000515BI0100001202 | 1 | each |
| 91 | 4 | WORKS STATION.Providing modular work station as shown in figure using 1\" nova pan on table top and 3/4\" nova pan are side pannel and drawyer keyboard etc, and the edges are finishing with pvc ban of suitable colour of nova pan and providing telescap channel on keyboard tray,drawyers and providing handles,locking arrangements. Pentagonal work station(L Shape (1.50x1.60m) | BI01010001010000000000000515BI0100001203 | 6 | each |
| 92 | 4.01 | WORK STATION Providing modular work station as shown in figure using 1\" nova pan on table\ntop and 3/4\" nova pan are side pannel and drawyer keyboard etc, and the edges are finishing with pvc ban of suitable colour of nova pan and providing telescap channel on keyboard tray, drawyers and providing handles, locking arrangements. Rectangular work station (1.0x0.60m) | BI01010001010000000000000515BI0100001204 | 3 | each |
| 93 | 4.02 | Supplying office - chair(EARL mid back) | BI01010001010000000000000515BI0100001205 | 5 | each |
| 94 | 4.03 | Supplying semi executive chair | BI01010001010000000000000515BI0100001206 | 1 | each |
| 95 | 4.04 | Supplying visitor chair (EARL) | BI01010001010000000000000515BI0100001207 | 6 | each |
| 96 | 4.05 | Supplying and fixing steel shelf (GODREJ) size 1.00x0.50x1.20m | BI01010001010000000000000515BI0100001208 | 5 | each |
| 97 | 4.06 | Supplying wooden reception table | BI01010001010000000000000515BI0100001209 | 1 | each |
| 98 | 5 | COMPTER NETWORK.Providing network cabling using cat 6 cable through 1\"case and\ncaping and giving connection including all labour charges material cost, grimping and\nconnection etc, complete - 1No | BI01010001010000000000000515BI0100001210 | 600 | metre |
| 99 | 5.01 | Supplying fixing roset box and grimping the ends etc. complete | BI01010001010000000000000515BI0100001211 | 6 | each |
| 100 | 5.02 | Supplying and fixing 4U RACK and giving connection | BI01010001010000000000000515BI0100001212 | 1 | each |
| 101 | 5.03 | Supplying and fixing 24 port switch and giving connection | BI01010001010000000000000515BI0100001213 | 1 | each |
| 102 | 5.04 | Supplying and fixing patch pannel and giving connection | BI01010001010000000000000515BI0100001214 | 1 | each |
| 103 | 5.05 | Supplying and fixing 1M PATCH CORD and grimping two ends | BI01010001010000000000000515BI0100001215 | 3 | each |
| 104 | 5.06 | Supplying and fixing 2M PATCH CORD and grimping two ends | BI01010001010000000000000515BI0100001216 | 3 | each |
| 105 | 5.07 | Supplying and fixing 3M PATCH CORD and grimping two ends | BI01010001010000000000000515BI0100001217 | 3 | each |
| 106 | 5.08 | Supplyind and fixing PATCH CORD 0.50M on top and grimping two ends | BI01010001010000000000000515BI0100001218 | 3 | each |
| 107 | 5.09 | Supplyind and fixing PATCH CORD 0.50M on bottom and grimping two ends | BI01010001010000000000000515BI0100001219 | 3 | each |
| 108 | 5.1 | Engaged a computer engineer for programming all network and commisionning etc. complete\n(1 Racks x 2000 = 2000) | BI01010001010000000000000515BI0100001220 | 1 | each |
| 109 | 6 | TELEPHONE CABLING. Supplying and drawing two pair telephone cable through 1\" case\nand caping and giiving connection | BI01010001010000000000000515BI0100001221 | 101 | metre |
| 110 | 6.01 | Supplying and fixing rose set box and giving connection | BI01010001010000000000000515BI0100001222 | 3 | each |
| 111 | 6.02 | Supplying and fixing IO box set and giving connection | BI01010001010000000000000515BI0100001223 | 3 | each |
| 112 | 6.03 | Supplying and fixing ordinary type telephone (BPL make) and other accessories) | BI01010001010000000000000515BI0100001224 | 3 | each |
| 113 | 7 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | BI01010001010000000000000515BI0100001225 | 5.5 | cum |
| 114 | 7.01 | Demolishing brick work manually / by mechanical means including stacking of serviceable material within 50 metres lead as per direction of Engineer-in-charge in cement mortar. | BI01010001010000000000000515BI0100001226 | 37.261 | cum |
| 115 | 7.02 | Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-charge. | BI01010001010000000000000515BI0100001227 | 8.317 | cum |
| 116 | 7.03 | Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material within 50 metres lead as per direction of Engineer -in-charges: in Lime Mortor | BI01010001010000000000000515BI0100001228 | 16.359 | cum |
| 117 | 7.04 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: of area 3sq metres and below | BI01010001010000000000000515BI0100001229 | 8 | each |
AI Tender Summary
Tender Timeline
Jun 23, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 02, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 05, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender