| 1 | 1 | Supply and Laying XLPE insulated galvanised steel strip or wire armoured electric power cable with stranded aluminium conductor 1100 V grade of size 95 sqmm 3.5 core complete all as specified and directed | | 200 | RM |
|---|
| 2 | 2 | Supply and Laying XLPE insulated galvanised steel strip or wire armoured electric power cable with stranded aluminium conductor 1100 V grade of size 120 sqmm 3.5 core complete all as specified and directed | | 200 | RM |
|---|
| 3 | 3 | Supply and Laying XLPE insulated galvanised steel strip or wire armoured electric power cable with stranded aluminium conductor 1100 V grade of size 50 sqmm 3.5 core complete all as specified and directed | | 150 | RM |
|---|
| 4 | 4 | Excavation in trenches hard/dense soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out excavated soil/sand/unserviceable LT Cable for laying of cable complete all as specified and directed. | | 113.6 | Cum |
|---|
| 5 | 5 | Material & Labour for Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection complete all as specified and directed. | | 66.5 | Cum |
|---|
| 6 | 6 | Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm in hard /loose soil complete all as specified and directed by Engineer-In-Charge. | | 134 | Cum |
|---|
| 7 | 7 | Removing excavated material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified. | | 69.6 | Cum |
|---|
| 8 | 8 | Material & Labour for brick well burnt Class ‘B’ designation of size 230X115X75mm as cover to underground cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over underground cable for cable protection in trenches complete all as specified and directed by Engineer-in-Charge. | | 6395 | Each |
|---|
| 9 | 9 | Cutting existing road/hardstand of any type by using crow bar chisel etc not exceeding 45 cm wide and not exceeding 1.5 meter depth for laying GI pipe including making good the surface by returning filling watering ramming in layers 150 mm thick PCC 1:2:4 over 200 mm thick hard core of broken bricks/stones over returning filling watering ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge. (GI pipe will be measured and paid separately) | | 8 | Sqm |
|---|
| 10 | 10 | Supply and lay in trenches/fixed on walls/poles GI tubing medium grade with all fittings of 50 mm bore complete all as specified and directed. | | 12 | RM |
|---|
| 11 | 11 | Taking down existing unserviceable LT Panel carefully duly disconnecting all the connections all as directed by EIC. | | 3 | Each Job |
|---|
| 12 | 12 | Supply and fix, cable jointing kit for straight through heat shrinkable type joint with jointing material and all connected accessories suitable for XLPE armoured aluminium conductor cable 1100 volts grade of size 3.5 core 70 to 120 sqmm including taking down of old one complete all as specified and directed. | | 5 | Each |
|---|
| 13 | 13 | Ditto All as per item No 12 here in above but cable jointing kit of size 25 to 50 sqmm | | 2 | Each |
|---|
| 14 | 14 | Material & Labour for earthing complete with galvanized iron or steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Metres below ground level) with top edge of earth plate not less than 1.5 Metres below ground level connected to galvanized iron strip 32x6 mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work & connecting the earthing to an earthing test point /transformer neutral/body/ LT panel etc. and testing on completion, complete all as specified and directed by Engineer-in-Charge. | | 16 | Each |
|---|
| 15 | 15 | Supply, install testing and commissioning of 3mm thick CRCA Outdoor LT Panel with mounting plates with and including the following switch gears and components and 800 Amps capacity copper bus bar, complete wiring, earth strip, sleeves, ferrules, DIN rail, Neutral link, Cable glands, lugs, PCC foundation, Drawing wallets etc and taking out incoming and outgoing cables from the loop including connections complete all as specified and directed.\nIN COMING\n(i) 400A, 36kA 4P MCCB with Microprocessor Based LSI Protection Release with Operating Handle - 01 Nos\n(ii) Multifunction Meter with RS485 Communication Port, Cl- 0.5 - 1 Nos\n(iii) Metering CTs Class 0.5, 10VA -3 Nos\n(iv) RYB Phase Indication LED Cluster Type Lamps - 3 Nos\n(v) ON, OFF & TRIP Indication LED Cluster Type Lamps -3 Nos\n(vi) 6A Control MCB SP type - 4 Nos\nOUT GOING\n(i) 125A,25kA,TPN MCCB with Adjustable Thermal Magnetic Release with Operating Handle - 2 Nos\n(ii) 100A,25kA,TPN MCCB with Adjustable Thermal Magnetic Release with Operating Handle -3 Nos\n\n | | 2 | Each Job |
|---|
| 16 | 16 | Supply, install testing and commissioning of 3mm thick CRCA Indoor LT Panel with mounting plates with and including the following switch gears and components and 800 Amps capacity copper bus bar, complete wiring, earth strip, sleeves, ferrules, DIN rail, Neutral link, Cable glands, lugs, PCC foundation, Drawing wallets etc and taking out incoming and outgoing cables from the loop including connections complete all as specified and directed.\nIN COMING\n(i) 400A, 36kA 4P MCCB with Microprocessor Based LSI Protection Release with Operating Handle - 01 Nos \n(ii) Multifunction Meter with RS485 Communication Port, Cl- 0.5 - 1 Nos \n(iii) Metering CTs Class 0.5, 10VA -3 Nos \n(iv) RYB Phase Indication LED Cluster Type Lamps - 3 Nos \n(v) ON, OFF & TRIP Indication LED Cluster Type Lamps -3 Nos\n(vi) 6A Control MCB SP type - 4 Nos\nSUB INCOMING\n(i) 400A On Load Changeover switch -1 Nos\nOUT GOING\n(i) 250A,36kA,TPN MCCB with Adjustable Thermal Magnetic Release with Operating Handle -2 Nos\n(ii) 200A,25kA,TPN MCCB with Adjustable Thermal Magnetic Release with Operating Handle -2 Nos\n(iii) 125A,25kA,TPN MCCB with Adjustable Thermal Magnetic Release with Operating Handle - 2 Nos\n(iv) 100A,25kA,TPN MCCB with Adjustable Thermal Magnetic Release with Operating Handle -2 Nos | | 1 | Each Job |
|---|
| 17 | 17 | Underground pneumatic horizontal drilling of holes under road, pavement, hard standing as required length at site by trenchless technology using ultra sound technique with necessary horizontal direction drilling (HDD) machine including providing HDPE Pipe 75 mm outer dia 0.40 Mpa including necessary joint connections and laying LT cable, The contractor shall be conduct underground scanning to detect existing LT cable line, sewage line, OFC Cable etc to avoid damage. The entry/exist hole must be large enough to fit the drilling tool and the operator in it so they can aim the tool. The hole also must be deep enough that as the tool compacts the ground and the surface to be remain undisturbed. The depth of the starting bore pit depends on the type of the soil that is being worked in and how well it compacts. The operator shall aim the tool to the desire exit point and allow it to perform it function creating a bore hole under the ground without disturbing surfaces. The operator also should monitor the surface to make sure that, it is undisturbed. As the tool near to the exit point it is slowed down and the exit pit should be dug to locate both the tool and the bore. As the tool enters the exit pit the operator should choose either dig up the tool to retrieve it or reverses the tool back into the first bore pit to retrieve it including connected earth work, all as specified and directed by Engineer-in-Charge. | | 40 | RM |
|---|
| 18 | 18 | Supply and Laying XLPE insulated galvanised steel strip or wire armoured electric power cable with stranded aluminium conductor 1100 V grade of size 10 sqmm 4 core complete all as specified and directed | | 350 | RM |
|---|
| 19 | 19 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre depth and getting out in soft / loose soil for laying of cable all as specified and directed by the Engineer-in-Charge. | | 90 | Cum |
|---|
| 20 | 20 | Supply and fix in repair LED Street light fitting 1x70 Watt pressure dia cast aluminum housing heat resistant toughened glass with frame with IP 66 Protection complete all as specified and directed . | | 15 | Each |
|---|
| 21 | 21 | Supply and fix wiring with two run of PVC (FR) insulated multistranded copper conductor cable of 1.5 sqmm drawing through PVC conduits with continuous earth wire PVC (FR) insulated cable of size 1.5 sqmm connected to earth including all conduit accessories complete all as specified and directed.(Note: Two run of sub main wire, one run of earth wire and one run of PVC Conduit pipe measured as one unit). | | 100 | RM |
|---|
| 22 | 22 | Supply and Fixing hot dipped GI octagonal pole of 6 Metres long with 01 Metre arm suitable for mounting of 01 Nos of LED street lights complete with base plate and GI foundation bolts and nuts including excavation and foundation complete all as specified and directed. | | 15 | Each |
|---|
| 23 | 23 | Dismantling/taking down steel tubular pole/RCC pole any size by cutting from foundation by means mechanically or manually all as specified and directed | | 15 | Each Job |
|---|
| 24 | 24 | Supply & Fix in replacement Bollard light fitting new generation, energy saving, environmental friendly, long life aesthetically designed die-cast aluminium landscape luminaries for downward lighting with high power LED as light source with epoxy powder coated black after phosphochromeate treatment of 10 Watt capacity ,IP65 protection including and foundation complete all as specified and directed by Engineer-in-Charge. | | 40 | Each |
|---|
| 25 | 25 | Supply and fix in repair timer box complete including 32 Amp 3 Pole contactor, digital time switch indicator, bypass switch, cable connectors all as specified and as directed | | 1 | Each |
|---|
| 26 | 26 | Designing, fabrication, supply, commissioning & testing of factory made indoor type, CPRI approved AMF Panel (As per OEM of DG Set) with By-pass panel suitable for 100 KVA DG set (with 12V DC control system) as per following specifications :-\n\nMicro processor based integral AMF Panel with by-pass panel, indoor type, CPRI type, CPRI approved, fabricated out of 16 SWG, CRCA sheet, undergone 7 tank process with powder coating, cubicle, compartmentalized, free standing, floor mounted, dust and vermin proof, removable gland plate, provision for cable entry from bottom, door lock with panel key, reinforcement of suitable size angle iron channel, galvanised hardware with Zinc passivation, 'T\" sections wherever necessary, including bottom channel supports, etc, fully meeting all requirements specified in state electrical inspectorate specifications. Panel assembly generally confirms to IS 8623 and built with the following items.\n(a) 160 A, 4 pole contactor for Alternator\n(b) 160A, 4 pole Duty contactor for FB Mains\n(c) 160 A 4 pole MCCB 36ka (2Nos) + NL for EB & DG Incomers\n(d) 160 A, 4 Pole on load change over switch (2 Nos) for AMF by pass\n(e) Microprocessor based AMF Module for DG Panel\n(f) AMF relay with accessories\n(g) Fault indications and CT indicators for DG on, Load on, Load on DG, Mains on, Load on Mains (Cond...)\n | | 1 | Each |
|---|
| 27 | 26.1 | (h) Low set earth fault relay with Class 5P10 Neutral CT\n(j) Emergency stop\n(k) Manual push buttons for Select DG contactor & EB contactor close\n(l) KWH Meter with CRT 45/5A, 15 VA, Cl: 1\n(m) Elect & Mechanical interlock system in double feeding protection\n(n) Metering DCM (VAF) & Phase indications with CRCT 450/5A, 15VA, Cl:1\n(o) Protection for electrical and mechanical parameters like lube oil pressure, water temp, over speed, over and under volt, over and under frequency.\n(p) Battery charger Unit 10 Amps/12 Volts with DC Am meter & Volt meter\n(q) Suitable Al bus bar with heat shrink insulation sleeves and insulators\n(r) Suitable Cu Bus earthing\n(s) Door Beadings\n(t) C-Frame Base stand\n(u) Panel Body-Chemically treated & Siemens Grey Shade Powder coated.\n | | | |
|---|
| 28 | 27 | Material and labour in repair for earth continuity conductor or main earthing strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed with poles or any other indicated situation for loop earthing etc as required using galvanised iron strip of size 32 X 6 mm including necessary drilling works, jointing, etc complete all as directed by the engineer-in-charge. | | 25 | RM |
|---|
| 29 | 28 | Supply and laying in trenches/passing through pipe/fixing in walls, 1100 volts grade heavy duty LT cable with XLPE insulated Aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed cross section area 70 Sqmm 3.5 core and testing connecting complete all as specified and as directed. | | 130 | RM |
|---|
| 30 | 29 | Amount of Credit Schedule shall be deducted to arrive the Contract Sum. | | | |
|---|
