| 1 | 1 | Material and labour for following REPAIR TO BED HARD MAP (FD/E6/Map/08) - (a) Removing old unserviceable long rail and Supply and fixing new long rails of Bed Hard size 1974mm x 65mm x 25mm rectungular MS pipe 18 Gauge using gas welding and standard workmanship complete all as directed. | 101 | 70 | Each |
|---|
| 2 | 2 | All as per item No 1 here-in-before but Removing old unserviceable Short rail and Supply and fixing new Short rails of Bed Hard size 900mm x 65mm x 25mm rectungular MS pipe 18 Gauge using gas welding and standard workmanship complete all as directed. | 102 | 40 | Each |
|---|
| 3 | 3 | All as per item No 1 here-in-before but Removing old unserviceable stiffner and Supply and fixing new stiffner of Bed Hard size 850mm x 25mm x 25mm square MS pipe 18 Gauge using gas welding and standard workmanship complete all as directed. | 103 | 60 | Each |
|---|
| 4 | 4 | All as per item No 1 here-in-before but Removing old unserviceable leg of Header frame Supply and fixing new leg size 600mm x 38mm x 38mm square MS pipe 18 Gauge using gas welding and standard workmanship complete all as directed. | 104 | 60 | Each |
|---|
| 5 | 5 | All as per item No 1 here-in-before but Removing old unserviceable stiffner of Header frame Supply and fixing new stiffner size 824mm x 38mm x 38mm square MS pipe 18 Gauge using gas welding and standard workmanship complete all as directed. | 105 | 50 | Each |
|---|
| 6 | 6 | All as per item No 1 here-in-before but Removing old unserviceable centre stiffner of Header frame Supply and fixing new centre stiffner size 824mm x 65mm x 25mm rectungular MS pipe 18 Gauge using gas welding and standard workmanship complete all as directed. | 106 | 40 | Each |
|---|
| 7 | 7 | All as per item No 1 here-in-before but Removing old unserviceable vertical frame for PLB of Header frame Supply and fixing new vertical frame size 162mm x 18mm x 18mm square MS pipe 18 Gauge using gas welding and standard workmanship complete all as directed. | 107 | 50 | Each |
|---|
| 8 | 8 | All as per item No 1 here-in-before but Removing old unserviceable horizontal frame for PLB of Header frame Supply and fixing new horizontal frame size 714mm x 18mm x 18mm square MS pipe 18 Gauge using gas welding and standard workmanship complete all as directed. | 108 | 45 | Each |
|---|
| 9 | 9 | All as per item No 1 here-in-before but Removing old unserviceable prelaminated board from header frame Supply and fixing new board size 750mm x 350mm x 18mm thick prelaminated particale board exterior gde. | 109 | 80 | Each |
|---|
| 10 | 10 | All as per item No 1 here-in-before but Removing old unserviceable leg of Footer frame Supply and fixing new leg size 462mm x 38mm x 38mm square MS pipe 18 Gauge using gas welding and standard workmanship complete all as directed. | 110 | 60 | Each |
|---|
| 11 | 11 | All as per item No 1 here-in-before but Removing old unserviceable stiffner of footer frame Supply and fixing new stiffner size 900mm x 38mm x 38mm square MS pipe 18 Gauge using gas welding and standard workmanship complete all as directed. | 111 | 60 | Each |
|---|
| 12 | 12 | All as per item No 1 here-in-before but Removing old unserviceable vertical frame for PLB of Header frame Supply and fixing new vertical frame size 314mm x 18mm x 18mm square MS pipe 18 Gauge using gas welding and standard workmanship complete all as directed. | 113 | 40 | Each |
|---|
| 13 | 13 | All as per item No 1 here-in-before but Removing old unserviceable horizontal frame for PLB of Header frame Supply and fixing new horizontal frame size 824mm x 18mm x 18mm square MS pipe 18 Gauge using gas welding and standard workmanship complete all as directed. | 114 | 60 | Each |
|---|
| 14 | 14 | Removing old unserviceable prelaminated board from footer frame Supply and fixing new board size 750mm x 350mm x 18mm thick prelaminated particale board exterior gde. | 115 | 60 | Each |
|---|
| 15 | 15 | All as per item No 1 here-in-before but Removing old unserviceable plywood Supply and fixing new plywood 12mm thick commercial BWR (7 nos of ply) size 1974mm x 824mm fixed with nut and bolt (10 Nos). All as shown on drgs. Make:- Centure / Kitply | 116 | 210 | Each |
|---|
| 16 | 16 | Material and labour for following REPAIR TO CHARPOY WITH HARD TOP MAP (FD/Map-II/01) (a) Supply and fixing in replacement the new portion of legs of Charpoy with Hard Top Map ( FD/Map-II/01) with 16 gauge thick mild steel square conduit 32 mm x 32 mm and 440 mm long with gas welding complete all as specified and directed. | 119 | 80 | Each |
|---|
| 17 | 17 | All as per item No 16 here-in-before but Supply and fixing in replacement the new portion of long rail of Charpoy with Hard Top Map ( FD/Map-II/01) with 16 gauge thick mild steel conduit 65 mm x 25 mm and 1916 mm long with gas welding complete all as specified and directed. | 120 | 60 | Each |
|---|
| 18 | 18 | All as per item No 16 here-in-before but Supply and fixing in replacement the new portion of short rail of Charpoy with Hard Top Map ( FD/Map-II/01) with 16 gauge thick mild steel conduit 65 mm x 25 mm and 836 mm long with gas welding complete all as specified and directed. | 121 | 60 | Each |
|---|
| 19 | 19 | All as per item No 16 here-in-before but Supply and fixing in replacement the new stiffner of Charpoy with Hard Top Map ( FD/Map-II/01) with 16 gauge thick mild steel square conduit 25 mm x 25 mm and 836 mm long with gas welding complete all as specified and directed. | 122 | 80 | Each |
|---|
| 20 | 20 | All as per item No 16 here-in-before but Supply and fixing in replacement the new centre stiffner of Charpoy with Hard Top Map ( FD/Map-II/01) with 16 gauge thick mild steel square conduit 25 mm x 25 mm and 836 mm long with gas welding complete all as specified and directed. | 123 | 70 | Each |
|---|
| 21 | 21 | All as per item No 16 here-in-before but Supply and fixing in replacement the new clips of Charpoy with Hard Top Map ( FD/Map-II/01) with mild steel flat 25 mm x 6 mm and 60 mm long with gas welding to the frame complete all as specified and directed. | 124 | 60 | Each |
|---|
| 22 | 22 | All as per item No 16 here-in-before but Supply and fixing in replacement the new ply wood of Charpoy with Hard Top Map ( FD/Map-II/01) with 12 mm thick commercial BWR (07 No of ply) size 1916 mm x 836 mm fixed with 10 No nuts, bolts and washers complete all as shown on drawing, specified and directed. Make:- Centure / Kitply | 127 | 210 | Each |
|---|
| 23 | 23 | Material and labour for follwing repair to Charpoy GI Pipe Nly Niwar FD-220 &221 (a) Removing old existing unserviceable nylon newar from Charpoy GI Pipe (FD-220 & FD-221), tightening the joints as required and supplying and weaving the charpoy with nylon newar (new virgin of superor quality white / light coloured and not from the recycled nylon newar) closely wooven on both side of width 50 to 5 mm weighing not less than 1.50 Kg per charpoy with 15 bands on short rail and 36 bands on long rail and the ends shall be folded up to 2 inches and hand stiched tightly with nylon thread complete all as shown on drawing, specified and directed. Make of nylon newar :- Sagar or equivalent | 127.689 | 1050 | Each |
|---|
| 24 | 24 | All as per item No 23 here-in-before but Assembling only the Charpoy GI Pipe (FD-220 & FD-221) by using existing components of the charpoy i.e. Long rail, short rail, legs etc at the BSO storeyard of GE(A) Bhuj including threading to the GI Pipe where ever required and tightening the joint complete all as shown on drawing, specified and directed. | 128.823 | 510 | Each |
|---|
| 25 | 25 | All as per item No 23 here-in-before but Supply and fixing in replacement the new long rail of Charpoy GI Pipe (FD-220 & FD-221) with 32 mm bore GI pipe medium grade ISI marked duly threaded both sides and fixing in the charpoy complete all as shown on drawing, specified and directed. | 129.957 | 500 | Each |
|---|
| 26 | 26 | All as per item No 23 here-in-before but Cutting the removed long rail from Srl item No. 28 here-in-before and making the same to short rail of the charpoy and threading the both ends and fixing the same in the Charpoy GI Pipe (FD-220 & FD-221) complete all as shown on drawing, specified and directed. | 131.092 | 480 | Each |
|---|
| 27 | 27 | All as per item No 23 here-in-before but Removing old existing unserviceable short rail from Charpoy GI Pipe (FD-220 & FD-221) and cutting the same and making it to the legs of the charpoy 480 mm long and threading the one end and fixing the same in the Charpoy and providing mild steel flat iron 25 mm x 3 mm clamps made to shape and gas welding to the legs including 3 mm thick mild steel plate making it to the round shape of size 3 mm x 50 mm and gas welding to the bottom of the legs of charpoys as shoe to the charpoy including removing old unserviceable legs with clamp and plate complete all as shown on drawing, specified and directed. | 132.226 | 400 | Each |
|---|
| 28 | 28 | All as per item No 23 here-in-before but Supply and fixing in replacement the new check nuts of Charpoy GI Pipe (FD-220 & FD-221) for 32 mm bore GI pipe medium grade check nuts 6 mm wall thickness and fixing in the charpoy complete all as shown on drawing, specified and directed. | 133.36 | 1000 | Each |
|---|
| 29 | 29 | All as per item No 23 here-in-before but Supply and fixing in replacement the new elbow of Charpoy GI Pipe (FD-220 & FD-221) for 32 mm bore GI pipe medium grade elbow 3 way weighing not less than 415 gms each ISI marked and fixing in the charpoy complete all as shown on drawing, specified and directed. | 134.495 | 1000 | Each |
|---|
| 30 | 30 | All as per item No 23 here-in-before but Supply and fixing in replacement the new clamps of Charpoy GI Pipe (FD-220 & FD-221) with mild steel flat iron 25 mm x 3 mm clamps made to shape of 15 mm internal diametre and gas welding to the legs for MNF set complete all as shown on drawing, specified and directed. | 135.629 | 2000 | Each |
|---|
| 31 | 31 | All as per item No 23 here-in-before but Removing old existing unserviceable wooden blocks from the bottomof the legs of Charpoy GI Pipe (FD-220 & FD-221) and providing 3 mm thick mild steel plate making it to the round shape of size 3 mm x 50 mm and gas welding to the bottom of the legs of charpoys as shoe to the charpoy complete all as shown on drawing, specified and directed. | 136.763 | 1000 | Each |
|---|
| 32 | 32 | Material and labour for following repair to Charpoy GI Pipe Ply Top FD-220 &221 (a) removing of old unserviceable Ply Woood Top and Supply and fixing in replacement the new ply wood of Charpoy GI Pipe (FD-220 ) with 12 mm thick commercial BWR (07 No of ply) size 1980 mm x 905 mm on charpoy frame as top fixed with 10 Nos nuts, bolts and washers (3 Nos on each long rail & 2 Nos on each short rail) bolt head counter sunk machine made size 75 mm x 5 mm with 2 Nos nuts & washers on each bolt complete all as shown on drawing, specified and directed. Make of Plywood :- Centure / Kitply / Greenply | 139.032 | 750 | Each |
|---|
| 33 | 33 | All as per item No 32 here-in-before but for removing of old unserviceable mild steel flat iron 25 mm x 4 mm of Charpoy GI Pipe (FD-220 ) fixed with long rail with bolt head counter sunk machine made size 75 mm x 5 mm with 2 Nos nuts & washers on each bolt and applying two coats of synthetic enameled black paint over a coat of red oxide primer to the newly fixed flat iron complete all as specified and directed. | 140.167 | 440 | Each |
|---|
| 34 | 34 | All as per item No 32 here-in-before but Supply and fixing in replacement the new long rail of Charpoy GI Pipe (FD-220) with 32 mm bore GI pipe medium grade ISI marked duly threaded both sides and fixing in the charpoy complete all as shown on drawing, specified and directed. | 141.301 | 500 | Each |
|---|
| 35 | 35 | All as per item No 32 here-in-before but Cutting the removed long rail from Srl item No. 4.00 here-in-before and making the same to short rail of the charpoy and threading the both ends and fixing the same in the Charpoy GI Pipe (FD-220) complete all as shown on drawing, specified and directed. | 142.435 | 260 | Each |
|---|
| 36 | 36 | All as per item No 32 here-in-before but Removing old existing unserviceable short rail from Charpoy GI Pipe (FD-220) and cutting the same and making it to the legs of the charpoy 480 mm long and threading the one end and fixing the same in the Charpoy and providing mild steel flat iron 25 mm x 3 mm clamps made to shape and gas welding to the legs including 3 mm thick mild steel plate making it to the round shape of size 3 mm x 50 mm and gas welding to the bottom of the legs of charpoys as shoe to the charpoy including removing old unserviceable legs with clamp and plate complete all as shown on drawing, specified and directed. | 143.57 | 500 | Each |
|---|
| 37 | 37 | All as per item No 32 here-in-before but Supply and fixing in replacement the new check nuts of Charpoy GI Pipe (FD-220) for 32 mm bore GI pipe medium grade check nuts 6 mm wall thickness and fixing in the charpoy complete all as shown on drawing, specified and directed. | 144.704 | 950 | Each |
|---|
| 38 | 38 | All as per item No 32 here-in-before but Supply and fixing in replacement the new elbow of Charpoy GI Pipe (FD-220) for 32 mm bore GI pipe medium grade elbow 3 way weighing not less than 415 gms each ISI marked and fixing in the charpoy complete all as shown on drawing, specified and directed. \n\nNote :- The amount of credit has been mentioned in the Sch of Credit in pdf form and the same will be deducted from the amount of SCh 'A' at the time of acceptance of work. | 145.838 | 980 | Each |
|---|
