Military Engineer Services-MES has published Provision Of Infrastructure For Precision Approach Radar At Ins Dega , Visakhapatnam. Submission Date for this Tender is 02-08-2021. Infrastructure Work Tenders in Visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Jul-2021 | 82155 Corrigendum 1 | BOQ | 26-07-2021 |
| 2 | 26-Jul-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-08-2021 |
| Name of Work: Provision of Infrastructure for Precision Approach Radar at INS Dega, Visakhapatnam | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 0 | Schedule "A" Part – I to Schedule "A" Part – XV: \nNote: Schedule "A" Part – I to Part – XV are reprised by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only | |||
| 2 | 1 | Lumpsum price worked out by the contractor for "Buildings & Structures", as listed in Schedule "A" Part – I on Serial Page No. 30. | BI01010001010000000000000515BI0100001111 | 1 | Each Job |
| 3 | 2 | Lumpsum price worked out by the contractor for "Pile Foundation", as listed in Schedule "A" Part – II on Serial Page No. 31. | BI01010001010000000000000515BI0100001112 | 1 | Each Job |
| 4 | 3 | Lumpsum price worked out by the contractor for "Covered Shed", as listed in Schedule "A" Part – III on Serial Page No. 33. | BI01010001010000000000000515BI0100001113 | 1 | Each Job |
| 5 | 4 | Lumpsum price worked out by the contractor for "Antenna Pedestal", as listed in Schedule "A" Part – IV on Serial Page No. 34. | BI01010001010000000000000515BI0100001114 | 1 | Each Job |
| 6 | 5 | Lumpsum price worked out by the contractor for "Site Clearance / Area Development / Earthwork Excavation", as listed in Schedule "A" Part – V on Serial Page No. 35. | BI01010001010000000000000515BI0100001115 | 1 | Each Job |
| 7 | 6 | Lumpsum price worked out by the contractor for "Road / Hardstanding / Culvert", as listed in Schedule "A" Part – VI on Serial Page No. 38. | BI01010001010000000000000515BI0100001116 | 1 | Each Job |
| 8 | 7 | Lumpsum price worked out by the contractor for "Area Drainage", as listed in Schedule "A" Part – VII on Serial Page No. 39. | BI01010001010000000000000515BI0100001117 | 1 | Each Job |
| 9 | 8 | Lumpsum price worked out by the contractor for "Sewage Disposal", as listed in Schedule "A" Part – VIII on Serial Page No. 41. | BI01010001010000000000000515BI0100001118 | 1 | Each Job |
| 10 | 9 | Lumpsum price worked out by the contractor for "Internal Water Supply", as listed in Schedule "A" Part – IX on Serial Page No. 42. | BI01010001010000000000000515BI0100001119 | 1 | Each Job |
| 11 | 10 | Lumpsum price worked out by the contractor for "Internal Electrification", as listed in Schedule "A" Part – X on Serial Page No. 44. | BI01010001010000000000000515BI0100001120 | 1 | Each Job |
| 12 | 11 | Lumpsum price worked out by the contractor for "External Water Supply", as listed in Schedule "A" Part – XI on Serial Page No. 45. | BI01010001010000000000000515BI0100001121 | 1 | Each Job |
| 13 | 12 | Lumpsum price worked out by the contractor for "External Electrification & DG Set", as listed in Schedule "A" Part – XII on Serial Page No. 47. | BI01010001010000000000000515BI0100001122 | 1 | Each Job |
| 14 | 13 | Lumpsum price worked out by the contractor for "Split Air-Conditioning & Water Cooler", as listed in Schedule "A" Part – XIII on Serial Page No. 48. | BI01010001010000000000000515BI0100001123 | 1 | Each Job |
| 15 | 14 | Lumpsum price worked out by the contractor for "Lightening Protection", as listed in Schedule "A" Part – XIV on Serial Page No. 49. | BI01010001010000000000000515BI0100001124 | 1 | Each Job |
| 16 | 15 | Lumpsum price worked out by the contractor for "Fire Alarm System", as listed in Schedule "A" Part – XV on Serial Page No. 50. | BI01010001010000000000000515BI0100001125 | 1 | Each Job |
| 17 | 15.1 | Schedule "A" Part – XIV: [Miscellaneous Items] [Road / Hardstanding / Culvert, Sewage Disposal, Internal Electrification, External Water Supply, External Electrification, DG Set, Split Air-Conditioning, Water Cooler, Lightening Protection & Fire Alarm System]: | BI01010001010000000000000515BI0100001126 | ||
| 18 | 16 | M & L for Boring for Bored Cast-in-Situ Under-Reamed Piles of 500mm dia and Bulb Dia of 1300mm, of Length 12.00m from Cut-Off Level in any strata except Soft Disintegrated Rock / Hard Rock using DMC Method and getting out and disposal of spoil out side MD land complete all as shown on drawings, as specified and directed.\nNote: RCC M–30 Design Mix and Reinforcement shall be measured and Paid separately. | BI01010001010000000000000515BI0100001127 | 35 | Each Job |
| 19 | 17 | M & L for Carrying out Initial Load Test on 500mm dia bored cast–in–situ piles as per IS – 2911 [Part – IV] complete all as specified and as directed. [Note: Safe Design Load of the Pile is 56 MT] | BI01010001010000000000000515BI0100001128 | 1 | Each Job |
| 20 | 18 | M & L for Carrying out Routine Load Test on 500mm dia bored cast–in–situ piles as per IS – 2911 [Part – IV] complete all as specified and as directed. [Note: Safe Design Load of the Pile is 56 MT] | BI01010001010000000000000515BI0100001129 | 1 | Each Job |
| 21 | 19 | Chipping out Pile of 500mm Dia up to Cut-Off level including disposal up to a distance of 50m complete all as specified and as directed. | BI01010001010000000000000515BI0100001130 | 35 | Each Job |
| 22 | 20 | M & L for Wet Mix Macadam of 225mm thick [compacted thickness] laying, spreading and compacting with clean, crushed, graded aggregate and granular material premixed with water at Optimum Moisture Content to a dense mass laid over prepared sub-grade/sub-base/base or existing pavement in accordance with the requirements of Specifications as per Table N0. 400–11 of MORTH Specifications complete all as specified and directed. | BI01010001010000000000000515BI0100001131 | 750 | Cubic Metre |
| 23 | 21 | M & L for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5 mm thick [Reflective Type] of colour White or Golden Yellow on roads, pavements and the like exceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface complete as per MOSRT & H specifications including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed. | BI01010001010000000000000515BI0100001132 | 248 | Square Metre |
| 24 | 22 | S & F in repairs Road Stud, Two way reflective of size 100mm X 110mm X 20 mm [Approximately], ABS body with retro reflective panel of Amber, Red or White colour complete all as specified and as directed. | BI01010001010000000000000515BI0100001133 | 220 | Each |
| 25 | 23 | M & L for 1200 mm bore RCC Pipes, Class NP3, laid and jointed with collars laid in trenches and jointed in Cement Mortar 1:1 complete all as specified and as directed. | BI01010001010000000000000515BI0100001134 | 22 | Running Metre |
| 26 | 24 | M & L for Concrete bed to drain pipes of size 1200 mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested in cement concrete, Type C2, 1:3:6, using 40mm graded stone aggregate complete all as specified and as directed. | BI01010001010000000000000515BI0100001135 | 22 | Running Metre |
| 27 | 25 | M & L for Conventional type LLDPE Septic Tank of 10 Users Capacity designed to carry Sewage and Sullage Water including excavation in any type of Soil, PCC 1:4:8, type D2 below Foundation, Vent Shaft connection etc. complete all as specified and as directed. | BI01010001010000000000000515BI0100001136 | 1 | Each Job |
| 28 | 26 | M & L for Soakage Well of size 1.20m dia and 1.50m effective depth including excavation in any type of soil, Foundation in PCC 1:3:6, type C2 with Honeycombed Masonry Walls with top ring in M30 Grade Design Mix Concrete including Intercepting Chamber and Screen Chamber made of Brick Masonry in Cement Mortar 1:6, RCC Cover Slab in M30 Grade Design Mix Concrete / SFRC Cover interconnecting pipes of RCC/DWC complete filled with brick bats with all ancillaries, fittings, fixtures complete all as specified and as shown on drawings and as directed. | BI01010001010000000000000515BI0100001137 | 2 | Each Job |
| 29 | 27 | M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. and Modular Type Pressed Metal Flush Box made out of 2mm thick GI Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point controlled by One Switch complete all as specified and as directed. | BI01010001010000000000000515BI0100001138 | 92 | Point |
| 30 | 28 | All as per Serial Item No. 27 above but One 3 Pin Switch Socket Outlet 5 Amps on Independent Board complete all as specified. | BI01010001010000000000000515BI0100001139 | 23 | Point |
| 31 | 29 | All as per Serial Item No. 27 above but for One 3 pin Socket Outlet 6 Amps on the Same Board with other switches complete all as specified and as directed. | BI01010001010000000000000515BI0100001140 | 8 | Point |
| 32 | 30 | All as per Serial Item No. 27 above but one 3 Pin Switch Socket Outlet 15 Amps on independent board, with 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor. | BI01010001010000000000000515BI0100001141 | 49 | Point |
| 33 | 31 | S & F Square recessed mounted Flat Panel LED Ceiling Light suitable for fixing in 2' X 2' Grid False Ceiling of not less than 3600 Lumens output, 5700 K, with high transmitive diffuser for soft-light and glare free symmetrical illumination with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 | BI01010001010000000000000515BI0100001142 | 19 | Each |
| 34 | 32 | S & F Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 1800 Lumens output, 5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 | BI01010001010000000000000515BI0100001143 | 23 | Each |
| 35 | 33 | S & F Surface & wall mounted Energy efficient LED Round Light Fitting, of not less than 900 Lumens output, 5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 | BI01010001010000000000000515BI0100001144 | 4 | Each |
| 36 | 34 | S & F Energy efficient, Low Noise, Ceiling Fan, 1200mm Sweep, BEE 5 Star Rated, with BLDC Motor, Copper Wound, 350 RPM, with Double Ball Bearing, Conforming to IS - 373, ISI Marked, suitable for operation on Single Phase, 240 Volts, AC, 50Hz, of approved colour including Down Rod, Canopies, 3 Nos. Blades, Shackles, Safety Rope, Hanging Clamps, Bushes and having P.F >0.94, Service Value >6.5, Air Delivery >215 CMM, Power Consumption less than 35 Watt, THD less than 5% with speed control by Electronic Regulator including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. | BI01010001010000000000000515BI0100001145 | 11 | Each |
| 37 | 35 | S & F Exhaust Fan, 450mm Sweep, 1400 RPM, Metal Body, Heavy Duty, with Double Ball Bearing, Conforming to IS - 2312, ISI Marked, suitable for operation on Single Phase, 240 Volts, AC, 50 Hz, including Louvers Shutter / Grill, BEE 5 Star Rated and of approved colour including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. | BI01010001010000000000000515BI0100001146 | 3 | Each |
| 38 | 36 | S & F Exhaust Fan, 300mm Sweep, 900 RPM, Metal Body, Heavy Duty, with Double Ball Bearing, Conforming to IS - 2312, ISI Marked, suitable for operation on Single Phase, 240 Volts, AC, 50 Hz, including Louvers Shutter / Grill, BEE 5 Star Rated and of approved colour including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. | BI01010001010000000000000515BI0100001147 | 1 | Each |
| 39 | 37 | S & F MCCB, FP, 125 Amps, 16 KA, 415 Volts, 50 Hz, suitable for fixing on N3 Frame complete all as specified and as directed. | BI01010001010000000000000515BI0100001148 | 2 | Each |
| 40 | 38 | S & F MCB, SP, 6 to 32 Amps, 10 KA, B Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed. | BI01010001010000000000000515BI0100001149 | 42 | Each |
| 41 | 39 | S & F MCB, SPN, 6 to 32 Amps, 10 KA, B Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed. | BI01010001010000000000000515BI0100001150 | 5 | Each |
| 42 | 40 | M & L for Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified and as directed. Note: 3 runs of 6 Sq.mm & one run of 25 mm dia PVC Conduit will be measured as one unit | BI01010001010000000000000515BI0100001151 | 300 | Running Metre |
| 43 | 41 | S & F Power Socket, 20 Amps with 2 Pole and Earth Plug & Socket for incorporating SP MCB complete including One MCB, SP, 20 Amps, B Curve, 240 Volts, 4 Modules, Modular Type Pressed Metal Flush Box and Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches & Sockets etc. complete all as specified and as directed. | BI01010001010000000000000515BI0100001152 | 16 | Each |
| 44 | 42 | S & F Energy efficient & Long life Building Security Light Luminaire, of not less than 3000 Lumens output, 5700 K with Pressure Die Cast Aluminium Housing, IP66 protection, heat resistant glass cover, high power LEDs as light source, electronic driver including GI Bracket made out of 32 mm bore GI Tube, Medium Grade of size not exceeding 1.50 m in length and bent to shape required and fixed with 2 Nos of Pole fitting Clamps made out of MS Flat of size 50 X 6mm, bolts, nuts, washers and painting with two coats of aluminium paint over a coat of primer red oxide zinc chrome primer and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 | BI01010001010000000000000515BI0100001153 | 6 | Each |
| 45 | 43 | M & L for Earthing with Single run of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 15 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. complete all as specified and as directed. Note: 1 run of 6 Sq.mm & one run of 15 mm dia PVC Conduit will be measured as one unit | BI01010001010000000000000515BI0100001154 | 90 | Running Metre |
| 46 | 44 | S & F GI Perforated Cable Tray of Size 75mm wide, 50mm Deep, made with 2mm thick Sheet, with Perforation not more than 17.5%, in convenient sections, joined with connectors including all Tees, Right Angle Bends, Suspenders, Bolts, Nuts, Washers etc. complete all as specified and as directed. | BI01010001010000000000000515BI0100001155 | 80 | Running Metre |
| 47 | 45 | S & F PVC Perforated Cable Tray of Size 100mm wide, 100mm Deep, with Cover, with Perforation not more than 17.5%, in convenient sections, joined with connectors including all Tees, Right Angle Bends, Suspenders, Bolts, Nuts, Washers etc. complete all as specified and as directed. | BI01010001010000000000000515BI0100001156 | 100 | Running Metre |
| 48 | 46 | S & F PVC Perforated Cable Tray of Size 75mm wide, 75mm Deep, with Cover, with Perforation not more than 17.5%, in convenient sections, joined with connectors including all Tees, Right Angle Bends, Suspenders, Bolts, Nuts, Washers etc. complete all as specified and as directed. | BI01010001010000000000000515BI0100001157 | 50 | Running Metre |
| 49 | 47 | S & F PVC Perforated Cable Tray of Size 150mm wide, 50mm Deep, with Cover, with Perforation not more than 17.5%, in convenient sections, joined with connectors including all Tees, Right Angle Bends, Suspenders, Bolts, Nuts, Washers etc. complete all as specified and as directed. | BI01010001010000000000000515BI0100001158 | 90 | Running Metre |
| 50 | 48 | S & F UPS suitable for Three Phase AC input of 300 to 450 Volts range and Out Put of 3 Phase of capacity 20 KVA, Double Conversion Online USP System, IGBT based, fully Microprocessor Controlled, Transformer Model, Latest SPWM Technology, Instantaneous Voltage Controller, Pure Sine Wave, High Input Time capacity, Cold Start facility, Heavy duty Charges, compact size, user friendly LCD Display, Micro Controller LCD Metering, High Efficiency, IGBT Rectified, LCD Display, Input Voltage, Output Voltage, Battery Voltage, Out Put Current with 30 Minutes Battery Backup of 12V/65AH SMF Batteries 30 Nos with tray and stand complete all as specified and directed. | BI01010001010000000000000515BI0100001159 | 1 | Each |
| 51 | 49 | Supplying, Installing, Commissioning and Testing of CPRI Prototype tested, Factory made, Free Standing Floor Mounted, Dust and Vermin proof LT Cubical Panel Board, Compartmentalised, Indoor type, fabricated with 2.00mm thick CRCA Sheet and shall be given pre-treatment for degreasing, phosphatising etc. in seven tank process and shall be powder coated with RAL7035 coat with matt finish after due preparation of surfaces. The panel shall consist of 300 Amps rating TPN bus bars of high conductivity Copper Alloy and shall be provided with colour coded heat shrinkable sleeves mounted on porcelain insulator supports, suitable double Compression Copper Cable Glands and panel shall be provided with separate compartments for each switch, with gland plates, lifting hooks, shutter type ventilating louver at both top & bottom duly internally secured with wire mesh, with suitable internal wiring with copper cable of suitable size, including instrumentation such as Ampere Meter, Volt Meter, Phase Indicating LED Lamps [RYB], Selector Switches etc with double stud hinged door, front openable with locking arrangement including interlocking with switch gears and suitable for 1100 Volts Grade, 3 Phase, 415 Volts, 4 Wire, 50 Hz, AC Supply and to withstand short circuit fault level of not less than 100KA and degree of protection shall be IP 43. The panel shall be fixed with angle iron frame made of angles of size 75 X 75 X 8mm at Corners and ISMC of suitable size for base, embedded 600 mm below ground level in PCC 1:2:4, Type B–1 using 20mm grade stone aggregate, 600 mm above ground level complete including connecting up with incoming and outgoing cables etc. and comprising the following: | BI01010001010000000000000515BI0100001160 | 1 | Each Job |
| 52 | 49.1 | [a] MCCB, 200 Amps, TP, 25 KA, 440 Volts, 3 Phase, AC, 50 Hz, Adjustable type complete with Overload Protection, no-volt thermal based release – 1 Nos [Incoming]\n[b] MCCB, 125 Amps, TP, 25 KA, 440 Volts, 3 Phase, AC, 50 Hz, Adjustable type complete with Overload Protection, no-volt thermal based release – 1 Nos [Outgoing]\n[c] MCCB, 100 Amps, TP, 16 KA, 440 Volts, 3 Phase, AC, 50 Hz, with Overload Protection, no-volt thermal based release – 1 Nos [Outgoing]\n[d] MCCB, 63 Amps, TP, 16 KA, 440 Volts, 3 Phase, AC, 50 Hz, with Overload Protection, no-volt thermal based release – 1 Nos [Outgoing]\n[e] MCCB, 40 Amps, TP, 16 KA, 440 Volts, 3 Phase, AC, 50 Hz, with Overload Protection, no-volt thermal based release – 1 Nos [Outgoing]\n[f] Digital type Ammeter of Range 0 – 800 Amps with CTs & Selector Switch – 4 Nos [1 Set].\n[g] Digital type Voltmeter of Range 0 – 500 V with Selector Switch – 1 Nos.\n[h] Colour Coded LED Phase Indicating Lamps for each Phase – 1 Set. | BI01010001010000000000000515BI0100001161 | ||
| 53 | 50 | S & F On-Load Changeover Switch, FP, 160 Amps, 415 Volts, 50 Hz, AC, Front Operated Handle, in Sheet Steel Enclosure, with Advance Neutral and conforming to IS - 13947 [Part - 3] & IEC:60947-3 complete all as specified and as directed. | BI01010001010000000000000515BI0100001162 | 1 | Each |
| 54 | 51 | S & F MCCB, FP, 125 Amps, 25 KA, 415 Volts, 50 Hz, suitable for fixing on N3 Frame complete all as specified and as directed. | BI01010001010000000000000515BI0100001163 | 2 | Each |
| 55 | 52 | M & L for Sub main wiring with 4 runs of single core 10 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 32 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 10 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified and as directed. Note: 5 runs of 10 Sq.mm & one run of 32 mm dia PVC Conduit will be measured as one unit | BI01010001010000000000000515BI0100001164 | 310 | Running Metre |
| 56 | 53 | Supply, Fabrication, Installation, testing and balancing of Sheet Metal Ducts made of GI Sheet of 22 Gauge with TDF Flange as in Rectangular / Square Duct made out of 'L' shaped hollow profile, duly factory boxed, including all accessories such as corner, cleat, carriage bolt, gasket and appropriate sealant on longitudinal joints etc. including fabrication and erection complete all as specified and as directed. | BI01010001010000000000000515BI0100001165 | 20 | Square Metre |
| 57 | 54 | S & F Fire Extinguisher of ABC Powder Map 90 based, of Capacity 2 KGs, ISI Marked complete all as specified and as directed. | BI01010001010000000000000515BI0100001166 | 8 | Each |
| 58 | 55 | M & L for Earthing complete with Copper Earth Plate Electrode 600 X 600 X 3.15 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to Copper Strip of size 20 X 3mm [Earth Lead] and GI pipe 40 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and as directed. | BI01010001010000000000000515BI0100001167 | 24 | Each Job |
| 59 | 56 | M & L for 25mm bore dia High Density Polyethylene Pipes [HDPE of pressure rating 6 KGf / Sq.cm laid in trenches or fixed to walls or ceilings or in floors etc. for drawing OFC Cable etc. complete all as specified and as directed. | BI01010001010000000000000515BI0100001168 | 6000 | Running Metre |
| 60 | 57 | M & L for cutting the existing GI pipe line 50mm dia and inserting GI Tee of 50 X 50 X 50 mm for making new branch connecting of GI Pipe 80mm dia including necessary fittings, excavation, returning, filling and depositing excavated material to a distance not exceeding 50m complete all as specified and as directed | BI01010001010000000000000515BI0100001169 | 1 | Job |
| 61 | 58 | M & L for Construction of Valve Chamber of size 1000 X 1000 X 1000 mm internal size suitable for Sluice Valve, with PCC 1:4:8, Type D2, using 40mm graded aggregate for foundation, 200 mm thick Brickwork with old size Fly Ash Bricks in Cement Mortar 1:6, 40 mm thick PCC, 1:2:4, Type B1, using 20mm graded aggregate Coping, rendering in CM 1:4, 15 mm thick including provision of Mild Steel Sheet Cover 3 mm thick with 40 X 40 X 6 mm size Angle Iron frame work embedded in concrete with suitable hinges and locking arrangements including two coat of synthetic enamel black paint over a coat of red oxide zinc chrome primer to steel surfaces and including necessary earth work excavation in any type of soil etc., removal of surplus soil off the premises complete all as specified and shown on drawing CEDD / TD / 119, Sheet No. 1 / 1 dated 20 August 1983, revised up to 21 September 1992. | BI01010001010000000000000515BI0100001170 | 2 | Job |
| 62 | 59 | Cutting Bituminous Road / Hardstanding etc. as required for Jointing / Laying Cables and Pipeline of width not exceeding 300mm and depth not exceeding 600mm and refilling after laying and making good with PCC 1:2:4, Type B1 using 20mm graded stone aggregate, 100mm thick complete all as specified and as directed. | BI01010001010000000000000515BI0100001171 | 5 | Running Metre |
| 63 | 60 | Design, Manufacture, Supply, Installation, Testing and Commissioning of 11 kV / 0.433 kV, 160 kVA Factory Assembled, Factory Tested ready to install and connections type Compact Substation / Unitised Substation / Compact Substation with an outdoor enclosure, equipped with 160 kVA Cast Resin Dry type Transformer, 3 Way, 11 kV Ring Main Unit [SF6 Gas Insulated Switchgear] consisting of 02 Nos, 630A at 11 kV Fault Making Load Breaking Switch with mechanical interlock between Two Load Breaking Switches & 01 Nos Tee-Off as SF6 Gas insulated Vacuum Circuit Breaker and with 630 Amps, Air Circuit Breaker as secondary side control complete with HT Cable interconnection in between Transformer and RMU and suitable sized Copper Busbar between Transformer and LV Incoming Main Switchgear-ACB for full load output current of the transformer and Internal earthing connections by GI Strips all as a single transport unit complete all as specified as detailed below:\n[a] Makes: Compact Sub-Station including Transformer and all HT & LT Switch Gears shall be of make BHEL / ABB / Siemens / Andrew Yule / Schneider / Crompton Greaves. Transformer and all HT & LT Switch Gears shall be same make as of Compact Sub-Station. | BI01010001010000000000000515BI0100001172 | 1 | Each Job |
| 64 | 60.1 | [b] Enclosure: Outdoor type enclosure having modular construction with 2mm thick Galvanized Sheet Steel in Corrugated / Louvered design type wall design for better heat dissipation and providing robust construction. The degree of protection for HT & LT switchgear compartment shall be IP54 & degree of protection of transformer compartment of the enclosure shall be minimum IP34. The enclosure exterior shall be painted with polyurethane paint / epoxy powder coated of 80 Microns thick and tropicalised to Indian weather conditions. Each compartment shall be provided with the door and pad locking arrangement. Doors of transformer compartment are fitted with Arc reflectors from the inside for providing better safety. The Compartment illumination lamp with door-operated switch shall be provided for each compartment. Structure of the substation shall be able to withstand the gross weight of all equipment. The Compact Substation shall be provided with lifting beams and hooks for easy installation at site and it shall be possible to transport the equipment along with Transformer, RMU & LT Panel from one site to another. Dimensions of enclosure shall be as per the components required and mentioned in BoQ. Final drawing shall be got approved from Accepting Officer. – 1 Nos. | BI01010001010000000000000515BI0100001173 | ||
| 65 | 60.2 | [c] HT Switchgear [Inside Compact Sub-Station]: Three Way 11KV, 630 Amps, 21 kA / 3 Sec Non-Extensible Ring Main Unit / Compact Switchgear with Copper Busbar, consisting of 630 Amps, Two Numbers [As incomer] fixed Manual Fault Making / Load Break Switches & One Numbers Fixed Manual SF6 insulated Vacuum Circuit Breakers [As Outgoing] in SF6 Gas insulated sealed for life minimum 2mm thick AISI 441 Grade stainless steel tank with IP 67 degree of protection with Air Insulated Metering Module, castle lock interlock shall be provided between two incomers such way that only one incomer shall switch on at any given point of time, One Number fault passage indicator shall be provided for each Load Break Switch with 1 NO + 1 NC Contact, One Number manometer shall be provided for outgoing feeders, One set of 80/1A, 2.5 VA, Class 1.0 for metering & One set of 80 / 1A, 2.5 VA, CL 5P 10 Current Transformers shall be provided, One number of Digital Multifunction Meter with RS 485 Port shall be provided for VCB Feeders, One Set of 11 kV / RT3 / 110 / RT3, Class 1.0, 50 kVA PTs shall be provided in Metering Module. Vacuum Circuit Breakers shall be with self-powered micro processor based Numerical Over Current and Earth Fault Relay having Charged Open / Closing Mechanism, On / Off Indicators, Mechanical Operation Counters etc. Interconnection between RMU and Transformer shall be using suitable Aluminium unarmoured 11 KV [UE] 1 X 3 Core X 95 Sq.mm or 3 X 1 Core X 95 Sq.mm XLPE cable. Incomer / outgoing Load Break Switches shall be suitable for termination of 1 Run of 3 Core X 300 Sq.mm aluminium armoured XLPE Cable. | BI01010001010000000000000515BI0100001174 | ||
| 66 | 60.3 | [d] Transformer [Inside Compact Sub-Station]: 160 KVA, 11KV / 433V, 3 Phase, 50 Hz, DYn11, Air Natural Cooling Cast Resin Dry Type, Double Copper Wound, CRGO Core type Transformer with Off Circuit Tap Links of range +5% to –5% in steps of 2.5% on HT side of transformer with WTI Scanner with Alarm and Trip Contact, with Class "F" Insulation, having Primary Voltage [HT] 11 KV and Secondary Voltage [LT] of 433 Volts, Delta connected on 11 KV Side & Star connected on 433 Volts side, designed & constructed with particular reference to Tropical Condition, conforming to IS – 1180 [Part - I] with latest amendments and with Energy Efficiency of "Level 2" – 1 Nos. Losses shall be as per ECBC. | BI01010001010000000000000515BI0100001175 | ||
| 67 | 60.4 | [e] LV Switchgear [Inside Compact Sub-Station]: 415 Volts, indoor LV Panel with Aluminium Busbars [100% for Phase & 50% for neutral, fabricated using 2 mm thick CRCA Sheet Steel, Ingress Protection IP4X, Compartmentalised complete with internal wiring consisting of following:\n[i] Incomer: MCCB, 800 Amps, FP, 36 KA, 415 Volts, 3 Phase, 50 Hz, Fixed Electrical type with Microprocessor based O/L, S/C, E/F Release – 1 Nos\n[ii] Metering for Incomer: Digital Multifunction Meter with A, V, KW, KWH, PF, Class 1.0 with Port – 1 Nos, LT Metering CT’s, 630 / 1A, Cast Resin Type, Class - 0.5 – 1 Set, R, Y, B, ON, OFF, Trip LED Indicating Lamps – 1 Set, Control MCB, SP, 6 Amps – As required \n[iii] Outgoing: MCCB, 400 Amps, TPN, 36 KA, 415 Volts, 3P, 50 Hz, Fixed Manual type adjustable with Microprocessor based Thermal magnetic O/L, S/C & E/F release – 3 Nos. \n[iv] Metering for Outgoing: Digital Multifunction Meter with A, V, KW, KWH, PF, Class 0.5 with Port for each outgoing feeder, LT Metering CT’s, 600 / 1A, Cast Resin Type, Class - 0.5 – 1 Set, R, Y, B, ON, OFF, Trip LED Indicating Lamps – 1 Set, Control MCB, 6A, SP – As required \n[v] Outgoing MCCBs of LT Switchgear shall be suitable for termination of 2 Runs X 3½ Core X 300 Sq.mm aluminium armoured Cable. Qty - 6 Nos. | BI01010001010000000000000515BI0100001176 | ||
| 68 | 60.5 | [f] Compact Substation shall be outdoor Plinth Mounted Type. The rate quoted is deemed to be including the cost of Erection, Commissioning of Compact Substation and Civil work such as Construction of foundation with Concrete / Brick masonry with plastering for the installation of Compact Substation of required size including trench for the cabling work etc. complete in all respect as directed by the GE. However the bidder shall furnish the foundation details for approval of GE before executing the work. \n[g] Compact Substation shall be complete with the internal interconnections & Earthing [GI] and extending of earth bar of Neutral and body terminals to the frame of the Compact Substation for connecting to the earth pits.\n[h] The bidder shall assemble the Compact substation at factory and no assembly of the same shall be allowed at site. Bidder shall be responsible for Installation & commissioning Compact substation. Technical data sheet of the Transformer, HV / LV Switchgear, Relay etc. shall be submitted to GE for approval before placing the supply order.\n[i] The equipments should be SCADA compatible in future by providing motor in future.\n[j] The bidder shall supply suitable & required no. of HT & LT Cable termination kits along with Compact Substation for HT & LT Cable terminations.\n[k] The Design for Internal Arc Fault shall be tested for 20KA for 1 Second as per IEC 1330/62271-202. | BI01010001010000000000000515BI0100001177 | ||
| 69 | 60.6 | [l] Pre-Dispatch Inspection: Bidder shall offer for pre-dispatch inspection at OEM works. Only after the equipments are cleared by the department in writing, the bidder can dispatch the equipment. Routine tests shall be conducted and original test certificates shall be submitted at the time of Pre-Dispatch Inspection. \n[m] Commissioning Spares: Additional commissioning spares such as Digital Multifunction Meter – 1 Nos, Indication lamps – 3 Nos, Protection Relay – 1 Nos, Spring Charging Handles – 2 Nos and Panel Keys – 2 Nos shall be provided by the bidder. \n[n] Suppressors or other protection devices shall be provided, if required as per schedule of quantities, wherever the sub-station installation is likely to interfere during the operation with any other electric or electronic equipment.\n[o] All fittings, unit assemblies accessories, hardware foundation bolts, terminals blocks for connections, cable glands and miscellaneous materials and accessories of items of work which are useful and necessary for efficient assembly and working of the equipment shall be deemed to have been included within the scope of the work in the tender and within the overall details for complete item whether they have been specifically mentioned or not.\n[p] Supplying and fixing MV Danger Notice Plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required. \n[q] Supplying and fixing HT Danger Notice Plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required. | BI01010001010000000000000515BI0100001178 | ||
| 70 | 61 | Supplying, Installing, Commissioning and Testing of CPRI Prototype tested, Factory made, Free Standing Floor Mounted, Dust and Vermin proof LT Cubical Panel Board, Compartmentalised, Outdoor type, fabricated with 3.15mm thick CRCA Sheet and shall be given pre-treatment for degreasing, phosphatising etc. in seven tank process and shall be powder coated with RAL7035 coat with matt finish after due preparation of surfaces. The panel shall consist of 600 Amps rating TPN bus bars of high conductivity Aluminium Alloy and shall be provided with colour coded heat shrinkable sleeves mounted on porcelain insulator supports, suitable double Compression Copper Cable Glands and panel shall be provided with separate compartments for each switch, with gland plates, lifting hooks, shutter type ventilating louver at both top & bottom duly internally secured with wire mesh, with suitable internal wiring with copper cable of suitable size, including instrumentation such as Ampere Meter, Volt Meter, Phase Indicating LED Lamps [RYB], Selector Switches etc with double stud hinged door, front openable with locking arrangement including interlocking with switch gears and suitable for 1100 Volts Grade, 3 Phase, 415 Volts, 4 Wire, 50 Hz, AC Supply and to withstand short circuit fault level of not less than 100KA and degree of protection shall be IP 54. The panel shall be fixed with angle iron frame made of angles of size 75 X 75 X 8mm at Corners and ISMC of suitable size for base, embedded 600 mm below ground level in PCC 1:2:4, Type B–1 using 20mm grade stone aggregate, 600 mm above ground level complete including connecting up with incoming and outgoing cables etc. and comprising the following: | BI01010001010000000000000515BI0100001179 | 1 | Each Job |
| 71 | 61.1 | [a] MCCB, 400 Amps, FP, 36 KA, 440 Volts, 3 Phase, AC, 50 Hz, Adjustable type complete with Overload Protection, no-volt thermal based release – 1 Nos [Incoming]\n[b] MCCB, 200 Amps, TP, 25 KA, 440 Volts, 3 Phase, AC, 50 Hz, Adjustable type complete with Overload Protection, no-volt thermal based release – 2 Nos [Outgoing]\n[c] MCCB, 63 Amps, TP, 16 KA, 440 Volts, 3 Phase, AC, 50 Hz, Adjustable type complete with Overload Protection, no-volt thermal based release – 3 Nos [Outgoing]\n[d] MCB, SPN, 20 Amps, 10 KA, B Curve, 230 Volts, AC, 50 Hz – 42 Nos [Outgoing]\n[e] Digital type Ammeter of Range 0 – 800 Amps with CTs & Selector Switch – 4 Nos [1 Set].\n[f] Digital type Voltmeter of Range 0 – 500 V with Selector Switch – 1 Nos.\n[g] Colour Coded LED Phase Indicating Lamps for each Phase – 1 Set. | BI01010001010000000000000515BI0100001180 | ||
| 72 | 62 | M & L for Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 32 X 6mm GI Strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and as directed. | BI01010001010000000000000515BI0100001181 | 20 | Each Job |
| 73 | 63 | M & L for Precast RCC Cable Route Indicator duly engraved with letters "HT/LT UG CABLE", of size 600 X 450mm, 100 mm thick with Semi Circular Shaped Top made of RCC 1:2:4, using 20 mm graded stone aggregate, duly Reinforced with High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 10 dia, duly grouted up to 550mm using PCC, 1:3:6, Type C1 complete including necessary excavation and earth work and applying Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] over a Coat of Weather Proof Exterior Primer of same manufacturer as that of paint on all the exposed concrete surfaces complete all as specified and as directed. | BI01010001010000000000000515BI0100001182 | 30 | Each Job |
| 74 | 64 | M & L Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machinery including HDPE Pipe, 150mm bore, 0.4 Mpa working pressure complete all specified and as directed.\nNote: The horizontal directional drilling machine boring shall be minimum shot length of 100m horizontal length in a single span and depth shall not be less than 1.20m. The unit rate quoted is deemed to be inclusive for earth work as required at site for boring at starting and termination ends complete all as directed. | BI01010001010000000000000515BI0100001183 | 120 | Running Metre |
| 75 | 65 | Supply Install Test and commissioning of Silent Diesel Engine driven Generating Set of Capacity 82.5 KVA / 66 KW, 415 Volts, Three Phase, 4 Wire, Engine as per IS – 10001 / 10002 and Alternator as per IS – 13364 complete with relay panel for automatic starting on main failure, control panel having meters, sound proof canopy as per relevant IS and foundation etc. including following: \n[Make: Kirloskar Green / Cummins / Ashok Leyland / Greaves Cotton]\nA. ENGINE: Direct Injection, Water / Air Cooled Engine, 2 Cylinder, in-line, 4 Stroke, rated at 1500 RPM, conforming to BS – 5514 and having following specifications:\n[i] In- line fuel pump with Electronic Governor for 82.5 KVA.\n[ii] Turbocharger\n[iii] Stainless Steel Exhaust Flexible Coupling and Exhaust Pipe duly insulated with Glass Fire Wool and Plain GI Sheet Cladding & extended outside the building.\n[iv] Silencer\n[v] Radiator\n[vi] Coolant Inhibitor\n[vii] Plate type Lub Oil Cooler\n[viii] Spin-On-Filters-Coolant, Fuel, Fuel & Lub Oil\n[ix] Dry type, Heavy Duty, Replaceable Paper Element Air Cleaner with Restriction Indicator\n[x] Flywheel Housing and Flywheel to suit Single Bearing Alternator\n[xi] Electrical Starter Motor\n[xii] Battery Charging Alternator\n[xiii] 1x12 Volts Batteries, 88 AH Capacity with multistranded copper cable for connecting leads and terminals\n[xiv] First fill of Lub Oil. | BI01010001010000000000000515BI0100001184 | 1 | Each Job |
| 76 | 65.1 | B. ALTERNATOR:\n[i] Self Excited & Self Regulated\n[ii] Voltage Regulation ± 1 %\n[iii] Class H Insulation\n[iv] Salient Pole Revolving Field\n[v] Digital Automatic Voltage Regulator [Part of PCC 1301]\n[vi] Standard Enclosure IP-23\n[vii] Telephone Interference Factor: 50\n[viii] Total Harmonic Factor: Better than 2%\n[ix] Supplying power to variable electrical load for unlimited hours. Prime power [PRP] is in accordance with ISO 8528. 10% over load capacity for one hour every 12 Hours of operation and will be suitable for tropical condition. | BI01010001010000000000000515BI0100001185 | ||
| 77 | 65.2 | C. ENGINE CONTROL WITH AMF PANEL: Standard AMF Control Panel along with DG Set, Cubicle with CRCA Sheet and angle iron structure including following accessories:\n[i] AMF Controller – 1 No.\n[ii] MCCB, FP, 25 Amps – 1 No with over load, short circuit protection.\n[iii] Contactor, FP, 25 Amps capacity – 2 Nos \n[iv] Microprocessor based LED type Multifunctional Intelligent Panel Meter for showing Current, Voltage, Frequency, Power Factor, Energy Consumed, Speed, Temperature of Engine, Oil Level, Battery Voltage etc. – 1 No.\n[v] Hooter Fault Notice\n[vi] Auxiliary Relays 12 Volts DC operated with 2 Nos +2 NC – 6 Nos.\n[vii] Suitable Terminals – 11 Nos\n[viii] Indicating Lamps for "DG ON & LOAD ON" – 6 Nos.\n[ix] Push Button Momentary Operated – 2 Nos\n[x] Emergency Stop – 1 Nos.\n[xi] Control Fuse 6 / 10 Amps – 11 Nos\n[xii] Selector Switches 2P, 2 Way, 16 Amps – 2 Nos\n[xiii] Selector Switches Spring Return – 1 Nos.\n[xiv] Control Wiring with suitable size copper conductors with pre-printed ferrules.\n[xv] Battery Charger 12 Volts, 10 Amps, SMPS Automatic Float cum Boost Charger – 1 Nos.\n[xvi] Current Transformer 50 / 5, Copper – 3 Nos. | BI01010001010000000000000515BI0100001186 | ||
| 78 | 65.3 | D. FUEL TANK:\n[i] Fuel Tank of suitable capacity for minimum 12 Hours run with provision for Supply and Return Lines, Level Indicator, Drain Valve, Cleaning Cover Vent Pipe & Locking Device.\n[ii] MS Fuel Pipeline from Fuel Tank to FIP of suitable size.\n[iii] Fuel Tank shall be mounted / located outside the cubicle with suitable mounting with angle iron supports.\nE. ACOUSTIC ENCLOSURE:\n[i] Designed to meet stringent MOEF / CPCB norms 75 dBA @ 1 m at 75% load under free field conditions. \n[ii] Air Inlet Louvers shall be designed to operate at rated load even at 50°C Air Inlet Temperature.\n[iii] Cubicle shall be powder coated for long lasting service life and super finish with UV Resistant Powder Coating and shall withstand extreme environment. Stain Steel hardware shall be used. \n[iv] Insulation Material shall meet / conform to IS – 8183 Specifications for better sound attenuation\n[v] Provision of Genset Controller for Engine & Alternator.\nF. ACCESSORIES:\n[i] Periodical Maintenance Tools as per Manufacture \n[ii] Operational, Spare Parts, & Installation Guidelines and Catalogue. | BI01010001010000000000000515BI0100001187 | ||
| 79 | 65.4 | NOTE: Rate quoted is also deemed to be including the following:\n[i] Provision of 200mm thick PCC 1:1½:3, Type A1, using 20mm graded stone aggregate Foundation over 200mm thick PCC 1:4:8, Type D-2, using 40mm graded stone aggregate over 200mm thick Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick complete as per manufacturer's instructions with Anti-Vibration Mounting Pads as per manufacturer’s guidelines including necessary earthwork excavation, return filling, removal surplus soil and applying two coats of Cement Based paint over a coat of Alkali Resistant Primer complete etc. complete all as directed.\n[ii] Testing of DG Set shall be carried out by the IEM in presence of the OEM Representative.\n[iii] Artificial load i.e. strip heaters of suitable capacity and Diesel required for testing shall be made available during test by the contractor. \n[iv] Extended terminals with tinned copper has to be provided for terminating the incoming & out going cable with suitable lugs for ACB’s / MCCB's if required.\n[v] U/G cable shall be laid / connected to DG Set Cubicle Panel to AMF Control Panel [Changeover Panel] all as specified and as directed\n[vi] Provision of cable gland & Aluminium lugs of suitable size for terminating the cable at both ends. | BI01010001010000000000000515BI0100001188 | ||
| 80 | 66 | Supply, installation, testing and commissioning of Water Cooler of 60 Litres Cooling Capacity and 120 Litres Storage Capacity, Fully Stainless Steel, Electric driven, Single Phase, 230 Volts of make Voltas or Blue Star or Usha or Godrej complete all as specified and as directed | BI01010001010000000000000515BI0100001189 | 2 | Each |
| 81 | 67 | Supply, install, testing and commissioning of 5 Star rated Hi-Wall Split Units Indoor / Outdoor with Cordless Remote Control Unit and with in-built advanced Air Filters for better indoor air quality with latest Inverter technology, having Eco friendly Refrigerant Gas, Copper Condenser Coil, EER 4.5 or above of Capacity 2.0 TR, Summer Cool, Inverter Compressor, Automatic 2D Swing Copper Condenser, BLDC Motor, necessary copper pipe connections including cutting, bending, brazing, insulation on pipe etc, PVC Drain Pipe, electric connection between indoor and outdoor unit with suitable size PVC insulated, multi-stranded copper cable including taking down old AC Units and depositing to MES Store Yard complete all as specified and as directed. Make: Blue Star / Hitachi / Daikin / Carrier / Voltas | BI01010001010000000000000515BI0100001190 | 7 | Each Job |
| 82 | 68 | Supply, install, testing and commissioning of 5 Star rated Hi-Wall Split Units Indoor / Outdoor with Cordless Remote Control Unit and with in-built advanced Air Filters for better indoor air quality with latest Inverter technology, having Eco friendly Refrigerant Gas, Copper Condenser Coil, EER 4.5 or above of Capacity 1.5 TR, Summer Cool, Inverter Compressor, Automatic 2D Swing Copper Condenser, BLDC Motor, necessary copper pipe connections including cutting, bending, brazing, insulation on pipe etc, PVC Drain Pipe, electric connection between indoor and outdoor unit with suitable size PVC insulated, multi-stranded copper cable including taking down old AC Units and depositing to MES Store Yard complete all as specified and as directed. Make: Blue Star / Hitachi / Daikin / Carrier / Voltas\nNote for Serial Item No. 67 & 68: The rate quoted by the contractor is deemed to include for Powder Coated Mild Steel Fixing Brackets for Outdoor and Indoor Units at any height and Copper tube of suitable size, Drain Pipe made of High Density Polyethylene Pipes [HDPE] of pressure rating 6 KGf / Sq.cm of 20mm dia up to 5.00 Metres and 3 Core, 4 Sq.mm, PVC Insulated and PVC sheathed, heavy duty cable, ISI marked with Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade up to 5.00 Metres for connecting indoor and outdoor units. | BI01010001010000000000000515BI0100001191 | 1 | Each Job |
| 83 | 69 | S & F Electronic wall mounted time delay Voltage stabilizer of 4 KVA Capacity, Automatic Operation, for input variation of 170 Volts to 250 Volts with stabilised voltage of 230 Volts with accuracy of ± 2.5% complete all as specified and as directed Make: V Guard / Servo / Kee Line | BI01010001010000000000000515BI0100001192 | 1 | Each |
| 84 | 70 | S & F Electronic wall mounted time delay Voltage stabilizer of 5 KVA Capacity, Automatic Operation, for input variation of 170 Volts to 250 Volts with stabilised voltage of 230 Volts with accuracy of ± 2.5% complete all as specified and as directed Make: V Guard / Servo / Kee Line | BI01010001010000000000000515BI0100001193 | 7 | Each |
| 85 | 71 | M & L for Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified and as directed. Note: 3 runs of 4 Sq.mm & one run of 25 mm dia PVC Conduit will be measured as one unit | BI01010001010000000000000515BI0100001194 | 90 | Running Metre |
| 86 | 72 | Supply, install, testing and commissioning of HYGRO Compact Desiccant Dehumidifier HDP P-1100 [700 CFM] with RH Controller and Display Unit, necessary Pre Filters and controls with proper mounting arrangement including Wall Mounting / Ceiling Suspended / Table Mounted with necessary structural arrangements and fittings with max 6m length of PVC / Flexible Hose Pipe Ducting for Process and Regeneration Air Inlet and Outlet, Desiccant Rotor Electric Heater shall be SS316 Tubular Heater for Reactivation IE3 Rated Process and Reactive Motor complete all as specified and as directed. Make: Proflute or Equivalent make as approved by GE. | BI01010001010000000000000515BI0100001195 | 1 | Each |
| 87 | 73 | Supply, install, testing and commissioning of HYGRO Compact Desiccant Dehumidifier HDP P-630 [400 CFM] with RH Controller and Display Unit, necessary Pre Filters and controls with proper mounting arrangement including Wall Mounting / Ceiling Suspended / Table Mounted with necessary structural arrangements and fittings with max 6m length of PVC / Flexible Hose Pipe Ducting for Process and Regeneration Air Inlet and Outlet, Desiccant Rotor Electric Heater shall be SS316 Tubular Heater for Reactivation IE3 Rated Process and Reactive Motor complete all as specified and as directed. Make: Proflute or Equivalent make as approved by GE. | BI01010001010000000000000515BI0100001196 | 1 | Each |
| 88 | 74 | S & F MCB, TPN, 63 Amps, 10 KA, B Curve, AC, 415 Volts, 50 Hz complete all as specified and as directed. | BI01010001010000000000000515BI0100001197 | 2 | Each |
| 89 | 75 | Supply, lay, test and commissioning of 3 Core, 1.50 Sq.mm, PVC Insulated and PVC sheathed, heavy duty cable, ISI marked with Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked including heavy duty PVC Conduit, 20 mm dia including all accessories, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc complete. | BI01010001010000000000000515BI0100001198 | 200 | Running Metre |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
