Public Health Engineering Department-PHED has published Rate Contract For Providing , Laying , Jointing , Testing And Commissioning Of Various Size And Type Pipelines In Uwss Pokaran. Submission Date for this Tender is 05-07-2021. Pipe Laying Tenders in Pokaran Rajasthan. Bidders can get complete Tender details and download the document.
| Name of Work: Rate Contract for Providing, laying, jointing, testing and commissioning of various size and type pipelines in UWSS Pokaran | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | PHED BSR 2020 and PWD BSR 2019 ITEMS | BI01010001010000000000000515BI0100001112 | ||
| 2 | 2 | 1.4 : Providing, lowering, laying and jointing in trenches standard lengths HDPE ISI marked pipes of following grade and nominal diameter as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. theard/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and jointing pipes in proper position including all specials by butt fusion/ electro fusion welding method, including all taxes (Central and local), transpotation and freight charges, insepection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials ( Tee, bend etc.) satisfactory hydraulic testing etc. complete as per technical specifications and direction of Engineer- in- charg. ( excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. (Supply upto 110 mm dia coil & above 110 mm dia. straight length in 6 M.) \n\nPE-80 PN-6 | BI01010001010000000000000515BI0100001113 | ||
| 3 | 3 | 90 mm dia | BI01010001010000000000000515BI0100001114 | 1 | mtr |
| 4 | 4 | 110 mm dia | BI01010001010000000000000515BI0100001115 | 1 | mtr |
| 5 | 5 | 1.5 : Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work). \nNote : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.\nSupply of pipe shall be in straight length in 6/12 M. | BI01010001010000000000000515BI0100001116 | ||
| 6 | 6 | 125 mm dia | BI01010001010000000000000515BI0100001117 | 1 | mtr |
| 7 | 7 | 140 mm dia | BI01010001010000000000000515BI0100001118 | 1 | mtr |
| 8 | 8 | 160 mm dia | BI01010001010000000000000515BI0100001119 | 1 | mtr |
| 9 | 9 | 180 mm dia | BI01010001010000000000000515BI0100001120 | 1 | mtr |
| 10 | 10 | 200 mm dia | BI01010001010000000000000515BI0100001121 | 1 | mtr |
| 11 | 11 | 225 mm dia | BI01010001010000000000000515BI0100001122 | 1 | mtr |
| 12 | 12 | Providing, lowering, laying, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including special ( tee, bends etc. ) complete including all taxes (Central and local), transpotation and freight charges, insepection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials ( Tee, bend etc.) satisfactory hydraulic testing etc. complete as per technical specifications and direction of Engineer- in- charg. ( excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. | BI01010001010000000000000515BI0100001123 | ||
| 13 | 13 | 100 mm dia | BI01010001010000000000000515BI0100001124 | 1 | mtr |
| 14 | 14 | 150 mm dia | BI01010001010000000000000515BI0100001125 | 1 | mtr |
| 15 | 15 | 200 mm dia | BI01010001010000000000000515BI0100001126 | 1 | mtr |
| 16 | 16 | 1.11. Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001127 | ||
| 17 | 17 | 1.11.1 MS pipe specials upto 600 mm dia (with minimum 5.0 mm thickness sheet) | BI01010001010000000000000515BI0100001128 | 1 | kg |
| 18 | 18 | 1.11.2 MS pipe specials above 600 mm dia(with minimum 6.3 mm thickness sheet) | BI01010001010000000000000515BI0100001129 | 1 | kg |
| 19 | 19 | 1.3 Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths DI standard specials with rubber ring (EPDM)/ nut bolt and insertion sheet and jointing as per IS: 9523-2000 or as amended up to date, such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, taxes, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge (excluding earth work). | BI01010001010000000000000515BI0100001130 | ||
| 20 | 20 | A/S Tee , Bend, Reducer (All End Socketed) | BI01010001010000000000000515BI0100001131 | ||
| 21 | 21 | 1.3.1.1 Upto 300 mm Diameter | BI01010001010000000000000515BI0100001132 | 1 | kg |
| 22 | 22 | Flange Socket, Spigot, Hy. Tee. | BI01010001010000000000000515BI0100001133 | ||
| 23 | 23 | 1.3.2.1 Upto 300 mm Diameter | BI01010001010000000000000515BI0100001134 | 1 | kg |
| 24 | 24 | A/F Tee , Bend, Reducer (All End Flanged) | BI01010001010000000000000515BI0100001135 | ||
| 25 | 25 | 1.3.3.1 Upto 300 mm Diameter | BI01010001010000000000000515BI0100001136 | 1 | kg |
| 26 | 26 | Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. \nNote: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001137 | ||
| 27 | 27 | 6.1.1 : Manually Operated CI Sluice valve of Class PN-1.0 | BI01010001010000000000000515BI0100001138 | ||
| 28 | 28 | 80 mm dia | BI01010001010000000000000515BI0100001139 | 1 | each |
| 29 | 29 | 100 mm dia | BI01010001010000000000000515BI0100001140 | 1 | each |
| 30 | 30 | 125 mm dia | BI01010001010000000000000515BI0100001141 | 1 | each |
| 31 | 31 | 150 mm dia | BI01010001010000000000000515BI0100001142 | 1 | each |
| 32 | 32 | 200 mm dia | BI01010001010000000000000515BI0100001143 | 1 | each |
| 33 | 33 | 6.4 : Providing, lowering, aligning, fixing in position in pipe line, CI double flanged Dual plate check valve of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Cover of Grey cast iron of IS:210/ FG200 , Disc / plates - Cast steel ,Disc seal ring of EPDM/ NBR (food grade quality), Body seat of SS ,Face to face dimensions as per API: 594, Flanges Drilled as per IS:1538. All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan conforming toType B of IS:341or paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Shaft/Stop Pin of SS- AISI- 304/410 , Hinge SS AISI 316/304 / CS ,Spring SS AISI 316/304 , Bonnet Gasket EPDM, Bush- Brass with EPDM/NBR "O "ring seal.Nut-Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) ,Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. \nNote: Rates are exclusive of tail piece/ dismantling joints and earth work. | BI01010001010000000000000515BI0100001144 | ||
| 34 | 34 | 6.4.1 : Class PN 1.0 | BI01010001010000000000000515BI0100001145 | ||
| 35 | 35 | 80 mm dia | BI01010001010000000000000515BI0100001146 | 1 | each |
| 36 | 36 | 100 mm dia | BI01010001010000000000000515BI0100001147 | 1 | each |
| 37 | 37 | 125 mm dia | BI01010001010000000000000515BI0100001148 | 1 | each |
| 38 | 38 | 150 mm dia | BI01010001010000000000000515BI0100001149 | 1 | each |
| 39 | 39 | 200 mm dia | BI01010001010000000000000515BI0100001150 | 1 | each |
| 40 | 40 | 6.17 : Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6 | BI01010001010000000000000515BI0100001151 | ||
| 41 | 41 | 80 mm dia | BI01010001010000000000000515BI0100001152 | 1 | each |
| 42 | 42 | 100 mm dia | BI01010001010000000000000515BI0100001153 | 1 | each |
| 43 | 43 | 125 mm dia | BI01010001010000000000000515BI0100001154 | 1 | each |
| 44 | 44 | 150 mm dia | BI01010001010000000000000515BI0100001155 | 1 | each |
| 45 | 45 | 200 mm dia | BI01010001010000000000000515BI0100001156 | 1 | each |
| 46 | 46 | 6.5 : Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI single Air Valve Flanged/ Screwed type of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended upto date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 ,Float Guide- HBT1,Body seat ring - Leaded tin bronze/ SS , Seal ring and face ring - EPDM/NBR, Ends flanged according to IS:6418 or screwed type shall have external pipe threads conforming to IS:554, Fasteners - CS. All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.\nNote: Rates are exclusive of connecting tee, pipe piece and earth work. | BI01010001010000000000000515BI0100001157 | ||
| 47 | 47 | 6.5.1 : Class PN 1.0 | BI01010001010000000000000515BI0100001158 | ||
| 48 | 48 | 25mm dia screwed end | BI01010001010000000000000515BI0100001159 | 1 | each |
| 49 | 49 | 50mm dia screwed end | BI01010001010000000000000515BI0100001160 | 1 | each |
| 50 | 50 | 6.13 : Providing, lowering, aligning, fixing in position and Jointing in pipe line, DI Body Flanged End Tamper proof Kinetic Air Valve of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512/ IS:14845:2000(amended up to date) Body, High pressure cover , Low pressure cover, Cowl and Joint support ring - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865, Float- LP ball & HP ball : AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR ,HP Orifice & HP orifice plug : Bronze/ SS ,Bush: Bronze ,Flanges as per IS/ BS, Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside .Fasteners - CS/ Galvanised steel, Outlet of big orifice will have a screen to prevent Tamper of float, with DI metal seated D/F Non rising stem. Sluice Valves as per (IS: 14846 amended upto date) PN 1.6 ratings. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.\nNote: Rates are exclusive of connecting tee, pipe piece and earth work. | BI01010001010000000000000515BI0100001161 | ||
| 51 | 51 | 6.13.1 : Class PN 1.6 | BI01010001010000000000000515BI0100001162 | ||
| 52 | 52 | 50mm dia | BI01010001010000000000000515BI0100001163 | 1 | each |
| 53 | 53 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. | BI01010001010000000000000515BI0100001164 | ||
| 54 | 54 | In all type of soil | BI01010001010000000000000515BI0100001165 | ||
| 55 | 55 | For HDPE pipe line dia up to 110 mm | BI01010001010000000000000515BI0100001166 | 1 | RMT |
| 56 | 56 | For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. | BI01010001010000000000000515BI0100001167 | 1 | RMT |
| 57 | 57 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering. All up to plinth level | BI01010001010000000000000515BI0100001168 | ||
| 58 | 58 | 1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001169 | 1 | cum |
| 59 | 59 | 1:1.5:3 (1Cement :1.5 Course Sand :3 Graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001170 | 1 | cum |
| 60 | 60 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. | BI01010001010000000000000515BI0100001171 | 1 | sqm |
| 61 | 61 | Construction of Man hole, in all types of soil inner size 1.5 x 1.2 M, with, 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, 38 Kg. C.I. cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design : Depth upto 1.5mtr | BI01010001010000000000000515BI0100001172 | 1 | Each |
| 62 | 62 | Supplying and fixing Ferro cement cover with CI frame for chamebrs & man holes of size\n500mm dia 12Kg CI frame to withstand 15MT centre point load (medium duty) | BI01010001010000000000000515BI0100001173 | 1 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
