Development Of Daranggiri Banana Market At Daranggiri, Goalpara, Assam.
Tender Value
9.49 Crore
Estimated cost
Bid Submission
07 Jul 2021
0 days left
EMD
18.98 Lakhs
Bank guarantee accepted
Document Fee
19000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Goalpara → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Development Of Daranggiri Banana Market At Daranggiri, Goalpara, Assam.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.(A) Up to a depth of 2.00m below the existing ground level.(a) In ordinary soil |
| 2 | (B) Extra over item no.1.1(A) above for each 1m depth or part thereof beyond the initial depth of 2m |
| 3 | Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (b) Above 1.5 m upto 3.00 m depth |
| 4 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.(c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. |
| 5 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (a) Within Guwahati city |
| 6 | (b) Other than Guwahati city |
| 7 | Supplying and filling sand gravel in foundation trenches of column footings over slushy soil including local carriage of materials within 8 km pumping out of water, ramming etc. complete for strengthening the bearing capacity of the soil as directed and specified including payment of Forest Royalty and Sales Tax and other duties and taxes as may be necessary. |
| 8 | Extra lead per km truck carriage for sand gravel beyond the initial lead of 8 km. |
| 9 | pebbles ( 25 mm down graded) |
| 10 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume |
| 11 | (b) In prop 1cement: 4 sand :8 coarse aggregate by volume |
| 12 | Plain cement concrete floor base in prop1:3:6 laid in alternatebays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. c) 100mm thick |
| 13 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. |
| 14 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level. (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser. a) M15 grade concrete or Prop. 1:2:4 |
| 15 | b) M20 grade concrete or Prop 1:1.5:3 |
| 16 | c) M25 grade concrete |
| 17 | (B)In super structure from plinth level up to 1st floor level.i) Walls (thickness not less than 100mm) including attached pillasters, buttresses, plinth and string course etc. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 |
| 18 | ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser. b) M25 grade concrete or Prop 1:1.5:3 |
| 19 | iii) Vertical and horizontal fins (thickness not more than 100mm) individually or forming box louvre and projected band.N) Without using admixture, plasticiser. b) M20 grade concrete or Prop. 1:1.5:3 |
| 20 | Extra over item Nos. 2.2.1 (I) (B),above for each subsequent floor or part thereof above the 1st floor level. |
| 21 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank |
| 22 | Sides of tie beams, grade beams etc. at or below ground level.(b) Using 25mm thick plank |
| 23 | Columns, Pillars, Posts & Strut. (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face. (ii) Using 25mm thick plank |
| 24 | (b) Circular or curved in plan (Using 38mm thick plank) |
| 25 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. (ii) Using 25mm thick plank |
| 26 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.(a) Floors etc. upto 200mm in thickness. (ii) Using 25mm thick plank |
| 27 | Sloping or Battering sufaces such as sloped slabs etc. including folded plates. (a) Where inclination to horizontal plane does not exceed 30o requiring shuttering only on the underside. (ii) Using 25mm thick plank |
| 28 | Vertical surface such as walls (any thickness), parapet walls, partitions, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses and the like. (ii) Using 25mm thick plank |
| 29 | Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc.(ii) Using 25mm thick plank |
| 30 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank) |
| 31 | Extra for each subsequent 1.0M height or part thereof beyond the initial height of 4.0M as mentioned in item no. 3.1.1 |
| 32 | Providing form work of ordinary timber planking and removal of the same in edges of slabs and breaks in floors and walls etc. of in-situ reinforced concrete works upto first floor level. (a) Thickness not exceeding 200mm. |
| 33 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.1 & 3.1.3(b). |
| 34 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.3(a). |
| 35 | Providing scaffolding using L&T-Doka access scaffold system upto a height of 40m. supported by frames of timber H-beams, bracings including suitable couplers, pins, tower spindles and 2nd class timber plank platforms complete as specified and directed by the department. (measurement to be taken on elevation area of the building/ structure). |
| 36 | Providing soling in foundation and under floorwith stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labourand materials and if necessary dewatering, complete. a) Brick on flat soling |
| 37 | c) Stone soling of thickness 150 mm |
| 38 | Filling sunken floor with broken jhama brick bats and sand including compacting and supplying of materials complete as specified and directed for all levels. |
| 39 | Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified. |
| 40 | (I) In sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.(1 cement:4 sand) |
| 41 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paidseparately). (A) 112mm thick brick wall. (a) In cement mortar in proportion 1:4.(1 cement:4 sand) |
| 42 | Stone masonary work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding, providing face stone, through stone and centering including racking of joints, curing and supplying and all carriage of stone as directed including payment of forest royalty and sales tax and carriage.(a) Random Rubble Masonry |
| 43 | Superlight Weight Autoclaved Aerated concrete Block work using Grade-I AAC block of compressive strength 40 kg/cm2 having dry density 550 to 650 kg/cum conforming to IS -2185 Pt-3 or Pt-4 in cement morter of prop 1:4 including racking out joints and curing complete as specified & directed. (II) In superstructure above plinth level up to 1st floor level.. |
| 44 | Superlight Weight Autoclaved Aerated concrete Block work using Grade-I AAC block of size 625x240 mm of different thickness of compressive strength 40 kg / sqm having dry density 550 to 650 kg/ cum conforming to IS- 2185 Pt-3 or pt-4 in cement morter of prop 1:4 including racking out joints and curing complete as specified & directed . ( protruding rod is to be provided at every 3 course interval and will be measured and paid seperately). (II) In superstructure above plinth level up to 1st floor level.(c) 125mm thick wall |
| 45 | Extra for AAC block walling for each subsequent floor or part thereof above the Ist floor level. AAC Block work over item no. 4.4.1 (I) (II) |
| 46 | 125 mm thick wall over item no 4.4.2 (II) ( c) |
| 47 | Providing and laying 50mm thick C.C. floor with metallic concrete hardener topping under layer of 35 mm thick cement concrete in prop.1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 20 mm and down) and top layer of 15mm thick of metallic cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 stone aggregate 6 mm and down) by volume with which metallic hardening compound of approved quality is mixedin the ratio of 4:1 (4 parts of cement : 1 part of metallic floor hardening compound of approved quality by weight) including finishing with curing complete as directed. |
| 48 | Providing and laying 65mm thick C.C. floor with metallic concrete hardener topping under layer of 50 mm thick cement concrete 1:2:4 (1cement:2 coarse sand:4 coarse aggregate of 20 mm and down) and top layer of 15mm thick of metallic cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 stone aggregate 6 mm and down) by volume with which metallic hardening compound of approved quality is mixedin the ratio of 4:1 (4 parts of cement: 1 part of metallic floor hardening compound of approved quality by weight) including finishing with curing complete as directed. |
| 49 | Providing and fixing glass strips in joints of cement concrete flooring /Terrazo flooring in all level. (a) 25 mm wide. (b) 40 mm wide (i) 4 mm thick |
| 50 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15 mm thick |
| 51 | B) ON WALLS. Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).a) Normal rangeSomany/ Orient/Nitco/Asian Makei) Of size 200mmx200mm and above |
| 52 | A) ONFLOOR . Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base ofcement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed.(Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make. i) Of size 400mmx400mm and above |
| 53 | Extra for Granite finish in marble slab / tiles at all levels. |
| 54 | Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). (i) Normal Quality. (i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) |
| 55 | Providing 18mm thick Granite slab on vertical face of pedestal laid over 10 mm thick base ofcement mortar in prop. 1:3 (1 cement : 3 coarse sand ) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed with approved quality of shade. |
| 56 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMIC. i)Normal range (Sizes 300 mm x 300mm and above). (a)Orient made:Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate |
| 57 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises orrounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. a) In cement mortar 1:3 |
| 58 | b) In cement mortar 1:4 |
| 59 | 15 mm thick Cement plaster in single coat on single or half brickwall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.A) On rough side. a) In cement mortar 1:3 |
| 60 | b) In cement mortar 1:4 |
| 61 | Extra over item no 6.2.1 to 6.2.3 for providing and mixing water proofing materials in cement mortar in prop as recommended by the manufacturer including curing complete as directed. i) 10 mm thick plaster. b) In cement mortar 1:4 |
| 62 | ii) 15 mm thick plaster. b) In cement mortar 1:4 |
| 63 | Extra over item no 6.2.1 to 6.2.3 forplastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. |
| 64 | Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed.a) On Single coat plaster |
| 65 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. a) On Single coat plaster |
| 66 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. a) On Single coat plaster |
| 67 | b) On two coat plaster |
| 68 | 15 mm thick plain cement mortar bands in cement mortar 1:4in width including curing complete as directed. A) Up to 300 mm width a) Flush band |
| 69 | Providing and fixing, in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm x 24mm & wall angle 24mm x 24mm . Using 4mm/6mm thick High Pressure Steam Cured Non Asbestos Fibre CementBoard as per IS 14862, to be placed in a grid of G.I. system duly suspended with 4mm/6mm dia G.I/M.S bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600mm/1200mmx600mm grid, all complete as per the drawing & directions of engineer-in-charge. Finally, if specified, boards are to be painted with 2 coats of acrylic emulsion paint of approved shade/make over a coat of cement primer before installing it on the grid. (A) Standard Ceilings of Everest make or equivalent as directed by the departement. (i) Using 4 mm thick FC Board |
| 70 | Providing Pre Painted Galvanized IronSheetRoofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement. (iii) 0.50 mm thick |
| 71 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing)at all levels including fitting and fixing self drilling, self tapping screws complete complete.TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement. (i) 0.50 mm thick |
| 72 | Grading roof for water proofing treatment with (a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size) |
| 73 | Providing and fixing of leak proof,fire retardant and Uv resistant skylighting galzing with Lexan polycarbonatesheet fixed with specially designed Domal management system confirming to IS:737 alloy & temper 6063 - T6 with a UTS of 180 to 200 mpa and weight of 1.03 kg/mtr. approx with EPDM rubber gasket of specific gravity as per ISO 2781,age resistant as per ASTM - D573 hardness as per 2240 & tensile strength as per ASTM 412 including the silicon sealent GE Bayer Weathersil NY as per drawing and directed by the Engineer in charge.(b) Polycarbonate Sheet(Multiwall) (ii)8mm thick |
| 74 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.(b)With 1st class timber (Bonsum/ Sundi) |
| 75 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. |
| 76 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. a) Decorative type face panel and block board core. (ii) 35 mm thick |
| 77 | Providing, fitting and fixingM.S.grillof required pattern for windows/ clerestory windows/ openingwith M.S. flatsat required spacingin frame all round,squre or round M.S.bars with round headed bolts and nuts or screws.I .Plain grill. (c) Fixed to Brickwork/P.C.C/R.C.C. |
| 78 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.(a) 2Track sliding window. (i) 6mm frosted glass |
| 79 | Providing, fitting and fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to the columns / stiffeners / walls with necessary holdfast / sleeves etc. as specified and directed at all levels. |
| 80 | Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately). a) 24mm thick |
| 81 | Supplying and installing uPVC- Sliding Windows made outof Lead free green profile having \"GREENLINE\" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screwsetc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent.With 5mm clear glass. (a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mmx 49mmx 2.4mm thick wall for flyscreen sash having 1.5mm thick reinforcement, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FINESTA/ ENCRAFT). (i) 2-Panel with 5mm clear float glass |
| 82 | f) Distempering with dry distemper of approved brand and manufacture(two coats)and of required shade on new wallsurfaceto givean evenshade, over and including priming coat of white primer after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. |
| 83 | i). Extra over item no (f), (g) and (h) above for distempering every subsequent coat of distempering with dry distemper of approved brand and manufacture. |
| 84 | j). Extra over item no. (f) above for distempering with dry distemper on ceiling and or sloping roof. |
| 85 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm). (i) Thickness = 1.5 mm thick |
| 86 | Applying priming coat over newwood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughlycleaningoil, grease, dirt snd other foreign matter , sand papering and knotting. (a). With ready mixed paint , Wood primer (pink) |
| 87 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth.a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 88 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed \"red-lead/ red oxide\" primer. |
| 89 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.(i).Surfaces over 100mm in width or girth.a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 90 | (ii).Surfaces up to 100mm in width or girth. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 91 | Finishing old/new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Dulux (ICI) paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) |
| 92 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ). a) Sliding door bolts. i) 300mm x 16mm |
| 93 | b) Tower bolts.i) 300mm x 12mm |
| 94 | c) Door handles. iii) 150mm |
| 95 | t) Door stopper with rubber stopper |
| 96 | Supplying , fitting and fixing galvanised barbed wire fencing with seven strands of barbed wire 12 S. W. G .x 2plies x4 points at 75mm apart with angle iron intermediate fencing posts not more than 1800mm apart andstraining and end post etc. as necessary to be fitted with straining eye bolts and staples etc.complete as directed, specification of the angle iron post as given below. a) Intermediate post 35mm x35mm x5mm x1800mm long bottom torched and duly slotted.b) Straining post 65mm x 65mm x 6mm x1820mm long with 2 stays of 35mmx35mmx1520mm long and 3 base plates 200mm x 200mm x 5mm, duly slotted to take eye bolts etc.c) Corner posts65mm x 65mm x 6mm x1820mm long with 2 stays of35mm x 35mm x 5mm x 1 670 mm and 3 base plates200mm x 200mm x 5mm,dulyslottedtotake eye bolts etc. d) Straining or end posts 65mmx 65mm x 6mmx 1820mm long with 1 stays of35mm x 35mm x 5mmx 1820 mm long withbase plates 200mmx 200mm x 5mm,dulyslotted to take eye bolts etc. (Alltheangle iron posts to be embeded 600mm in C.C.pillars ofsize 300mmx300mmx600mm in prop.1: 3: 6 and one coatof anticorrosive readymixed painting toalliron works)includingexcavation of foundationtrenchesfor C.C.blocksandrefilling and removal of surplus soil after completion of works |
| 97 | Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are tobe protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessarylocking arrangement on both faces, arrangement for temporary closing the gateand 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts). |
| 98 | Providing rails for plying of rollers of gate made made from 50mm x 6mm size M.S. flat and to be fitted with 3 nos of hinged hold fasts to be embedded in concrete prop. 1:2:4 of 10mm wide and 75 mm deep over brick flat soling 250mm wide including curing etc. complete. |
| 99 | Providing roller to the gate including welding etc.complete. a) With 25mmx50mm (dia) roller |
| 100 | b) With 12.50mmx50mm (dia) roller |
| 101 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL. (i) TMT Corrosion resistant steel (CRS) reiforcement bar |
| 102 | (ii)Super Ductile (SD) TMT reinforcement bars |
| 103 | c)ISI approved Mild steel reinforcement bar(M.S.Bar) |
| 104 | Extra over item 18.1.1(a,b,c) for each subsequent floor or part thereof above first floor level. |
| 105 | Steel work riveted and/ or bolted/ riveted in built up sections, frame work including cutting, hoisting, fixing in position and applying a priming coat of red- lead paint up to 4.6m height above plinth including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. b) In single stanchions (columns) composed of R.S.J. or channels with caps, bases, splices, angle brackets etc. |
| 106 | Steel work welded in built up sections, framed work including cutting, hoisting and fixing in positions and applying priming coat of red-lead paint including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed.b) In trusses and trussed purlins up to 25m span and 15.0m overall height. |
| 107 | Providing, fitting, hoisting and fixing of roof trusses fabricated out ofcombination of anytwo or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997b) Using other ISI marked approved brand tube |
| 108 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. |
| 109 | Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed. a) M. S. Angles……. |
| 110 | b) M. S. Flats……. |
| 111 | c) M. S. bolts & nuts……. |
| 112 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). |
| 113 | Providing and fixing Stainless Steel ( Grade 304 ) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing,polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge. ( For payment, only weight of Stainless Steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc will be considered) |
| 114 | Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. |
| 115 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. i). 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm. |
| 116 | Supplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide)including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (A) ADOPTING SINGLEROWPLANTINGMETHOD. (iii) WithChinese Bamboo |
| 117 | (B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD. (iii) With Chinese Bamboo |
| 118 | Supplying and planting of ornamental trees (1\"-0\" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (A) Neem / Mahaneem / Beef wood/ Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu/ Ajar |
| 119 | Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels. |
| 120 | WATER PROOFING OF CHAJJAS, ROOF SLABS, TERRACES, SUNKEN SLABS, SEPTIC TANK,OH TANK, RAFT SLAB IN BASEMENT, WALLS ETC. (A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.:(i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat.(ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals) @ 15% by weight of cement.(iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals) mixed with cement in the ratio 1:2 as final coat. |
| 121 | Jungle clearence including uprooting ofvegitation, grass, brush-wood, saplingand trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm |
| 122 | Providing and fixing galvd. / M.S. tube (light grade) outlet (spout) in cement mortar 1:3 including cutting and making good the wall. (a).25mm bore- 300mm long. |
| 123 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire withnecessary shuttering , curing etc. completeincluding fixing in position as directed. a) 100mm thick slab |
| 124 | b) 75mm thick slab |
| 125 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. |
| 126 | Pre construction anti - termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 (five) litres per square meter towards the concrete and masonry walls so as to ensure earth in contact with the structure well treated - with chemical (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. |
| 127 | Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. |
| 128 | Pre construction anti - termite treatment by applying in the junction of walls, column with the floor before laying floor and after operation of item no. 26.1.3 above making a channel 30mmx30mm all over the walls and making rod holes @ 150mm apart up to ground level below and applying emulsion @ 11 litres per square meter of vertical plinth wall surface inside the building so as to soak the soil with the emulsion up to the ground level and refill the holes and channel with the original materials obtained in making channels (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. |
| 129 | Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. |
| 130 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. a) TMT Bar. (i) From primery producer |
| 131 | Supply, Installation, Fixing of MECHANICAL FOAM (AFFF) Fire Extinguisher confirming to IS: 10204 with ISI Mark and CO2 Cartridge will be confirming to IS: 4947 with ISI mark, (AFFF) will be confirming to IS: 4989 with ISI Mark.(9 LTRS) BRAND : FIRESTOP / FIREND / FIRE SHIELD |
| 132 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc.,and removal of the same for in-situ reinforced concrete and plain concrete work in R.C.C. approach road.(b) Using 25mm thick plank. |
| 133 | Providing and laying controlled cement concrete pavement of approved grade with 20mm down graded stone aggregate over a prepared sub-base including dewatering if necessary, spread, compacted and finished in a continuous operation including provision of construction and expansion joints, plasticiser and curing compound of Fosroc/ Sika/ Choksey/ Degusa and hardener of Recron/ Degusa/ Fosroc; finishing to lines and grades and curing as specified and directedcomplete(form work and reinforcement shall be measured and paid separately). (b)M 25 Grade Concrete |
| 134 | 15 mm thick Cement plaster in single coat with hardener of Recron/ Degusa/ Fosroc onbrick/concretefor plasteringincluding arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (a) In cement mortar 1:3 |
| 135 | Providing,Fixing, testing &Commissioning ofRain water Hervesting system for 1000 sq.feet roof area with 110 mm uPVCpipe of Class-3 conforming to IS:4985-200 (with uptodate amendment) with extra UV ray protection by Titanium Dioxide(TiO2) directing the Rainwater toRainy filter/Pop-up raintap filter (Excluding Civil Works) |
| 136 | Providing,Fixing, testing &Commissioning ofRain water Hervesting system for 1000 sq.feet roof area with 180 mm uPVC Gutter of Class-3 conforming to IS:4985-200 (with uptodate amendment) with extra UV ray protection by Titanium Dioxide(TiO2) along the outer periphery of the GCI/Diana roof ,110 mm UPVCpipe directing the Rainwater toRainy filter/Pop-up raintap filter(Excluding Civil Works) |
| 137 | Water storage tankISI Marked, conforming to IS:12701/1996 (with uptodate amendment).(Excluding Civil Works) |
| 138 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately). A) Parryware make. (xv) Indus (inclusive of seat cover and fittings) (white) (Cat. No. C0215/14/66) (S/P Trap) |
| 139 | Providingfitting and fixing vitreous china flat back type lippedfront urinal basinwith standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting offittings and brackets, cutting andmaking good the walls& floors wherever required. (A) Parryware Make. (a) White. (i) New Magnum (Cat. No.C0575) |
| 140 | Providingfitting and fixing vitreous china squatting plate urinalwithautomatic flushing cisternwith standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting offittings and brackets, cutting andmaking good the walls& floors wherever required. (A) Parryware Make. (i) White (Cat. No. C0503) |
| 141 | Supplying, fiting and fixing automatic flushing cisternwith all internal fittingswith CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately). ii) Hindware make. a) White. Auto Cister 10 litre (Cat. No.C61002) |
| 142 | Providing vitreous Chinawash basinwith CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately). PEDESTAL BASIN (with pedestal). (A) Parryware Make. (iv) Cascade NXT 550 x 440 with long Pedestal (Cat. No.C0404/C0380) |
| 143 | Counter Top Basin. (A) Parryware Make. (iii) Cascade NXT 550 x 445 (Cat. No.C0430) (coloured) |
| 144 | Providing fitting & fixingstainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipeetc. complete includingpainting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately. (A) Parryware Make. (i) Single Bowl with Veg Bowl & Drain Board (400 x 200) Flat Edge- Glossy (Cat.No.C8545) |
| 145 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. |
| 146 | Providing fitting and fixing Decorative Mirror complete as directed and specified.(A) Parryware Make. (a) Size 800mm x 600mm |
| 147 | (b) Size 600mm x 450mm |
| 148 | Glass shelf with C.P. guard rail. (ii) Sona make (Cat. No.TR-0701). (a) 450mm |
| 149 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. (a) Parryware Make. (ii) Wall Soap tray (Cat. No.C9951) |
| 150 | Providing, fitting and fixing Liquid soap dispenser and liquid soap containercomplete as directed and specified. (iv) Sona make (Cat. No.AL-1011) |
| 151 | Providing, fitting and fixing CP towel rail complete as directed and specified.(b) Sona make. (i) Towel rail Diplomat 300mm long (Cat.No.TR-0605) |
| 152 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (b) Sona make. (i) Towel ring round (Cat.No.TR-06051) |
| 153 | (ii) Towel ring round Aristo (Cat.No.TR-0652) |
| 154 | Providing, fitting and fixing Chrome Plated TOILET PAPER holdercomplete as directed and specified..(a) Jaquar make (i) Continental toilet paper holder (Cat.No. ACN-1151N) |
| 155 | Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified.(b) Sona (i) Rupa 32mm (HT/ FT) (Cat.No.WS-0801) |
| 156 | Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. (b) Sona make (i) Bottle trap indian 32mm (Cat. No.BT-0751) |
| 157 | Providing, fitting and fixing Chrome Plated bottle trap pipe complete as directed and specified. (a) Sona make. (i) Pipe for bottle trap 300mm long (Cat. No.BT-0761) |
| 158 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISIapproved including joining ,fitting and fixing wiyh clamps etc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia |
| 159 | (ii) 110mm dia. |
| 160 | (iv) 75mm dia. |
| 161 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.Cand making good to the damages.(i) 160mm dia |
| 162 | (ii) 110mm dia. |
| 163 | (iv) 75mm dia. |
| 164 | Supplying, fitting and fixing 87.5 degree PVC bend of(Supreme/Prince) or other ISIapproved including joining ,fitting and fixingetc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia |
| 165 | (ii) 110mm dia. |
| 166 | (iv) 75 mm dia. |
| 167 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.Cand making good to the damages. (i) 160mm dia |
| 168 | (ii) 110mm dia. |
| 169 | (iv) 75 mm dia. |
| 170 | Supplying fiting and fixing 87.5 degree PVC bendwith doorof (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia |
| 171 | (ii) 110mm dia. |
| 172 | (iv) 75 mm dia. |
| 173 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.Cand making good to the damages.(i) 160mm dia |
| 174 | (ii) 110mm dia. |
| 175 | (iv) 75 mm dia. |
| 176 | Supplying fiting and fixing45degree PVC bend of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia |
| 177 | (ii) 110mm dia. |
| 178 | (iv) 75 mm dia. |
| 179 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.Cand making good to the damages. (ii) 110mm dia. |
| 180 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. i) 160mm dia. |
| 181 | (ii) 110mm dia. |
| 182 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.Cand making good to the damages.(ii) 110mm dia. |
| 183 | (iv) 75 mm dia. |
| 184 | Supplying fiting and fixing PVCsingle tee with door of(Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia. |
| 185 | (ii) 110mm dia. |
| 186 | (iv) 75 mm dia. |
| 187 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.Cand making good to the damages. (ii) 110mm dia. |
| 188 | (iv) 75 mm dia. |
| 189 | Supplying fiting and fixing PVCsingle ‘Y’ of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia. |
| 190 | (ii) 110mm dia. |
| 191 | (iv) 75 mm dia. |
| 192 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.Cand making good to the damages. (ii) 110mm dia. |
| 193 | (iv) 75 mm dia. |
| 194 | Supplying fiting and fixing PVCsingle ‘Y’ with door of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 110mm dia. |
| 195 | (ii) 75 mm dia. |
| 196 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.Cand making good to the damages. (i) 110mm dia. |
| 197 | (ii) 75 mm dia. |
| 198 | Supplying fiting and fixing PVC double‘Y’ plain of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 75 mm dia. |
| 199 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.Cand making good to the damages. (i) 110mm dia. |
| 200 | (ii) 75 mm dia. |
| 201 | Supplying fiting and fixing PVC cross ‘T’ with doorof (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 110mm x110mm |
| 202 | (ii) 75 mm x 75mm |
| 203 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.Cand making good to the damages. (i) 110mm x110mm |
| 204 | (ii) 75 mm x 75mm |
| 205 | Supplying fiting and fixing PVC coupler of (Supreme / Prince)or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified.a) In exposed surfaces or in trenches.(i) 110 mm dia |
| 206 | (iii) 75 mm dia |
| 207 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.Cand making good to the damages.(i) 110 mm dia |
| 208 | (iii) 75 mm dia |
| 209 | Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160 mm x 110mm |
| 210 | (iii) 110 mm x 90mm |
| 211 | (iv) 110 mm x 75 mm |
| 212 | (viii) 75 mm x 63 mm |
| 213 | Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. in exposed surface or trencesas necessary complete at all levels including below G.L. as directed and specified.(a) 110 mm |
| 214 | Providing fitting and fixing PVC cowel of ISI make completeas directed and specified.(iii)90mm dia. PVC cowel of ISI make |
| 215 | Providing fiting & fixingC.I. Grating to the floors complete asdirected and specified.(a) 110mm dia |
| 216 | Supplying, fitting and fixing Kitchen chimney including water proof ply board, plain sheet, decorative prelaminated sheet, nail, fevicol, dendrite, wooden beading etc.as required complete as specified and directed by the department. |
| 217 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. |
| 218 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. |
| 219 | Providing and fixing 3 layer (Outer green / GREY coloured UV Stabilised, middle black coloured UV Stabilised and inermost layer white coloured with antimicrobial property) Fusion welded PP-R ( Poly propylene-random copolymer) Pipes, SDR 7.4 having thermal stability for hot and cold water supply conforming IS 15801-2008 including all plain PP-R fittings and brass threaded PP-R fitting and clamping, cutting and making good to the damages.(A) Exposed or in trenches.SFMC/ FUSION brand or other brand of equivalent quality. a) PN-16 Pipe,16mm OD,SDR-7.4 |
| 220 | b) PN-16 Pipe,20 mm OD,SDR-7.4 |
| 221 | c) PN-16 Pipe,25 mm OD,SDR-7.4 |
| 222 | f) PN-16 Pipe,32 mm OD,SDR-7.4 |
| 223 | e) PN-16 Pipe,40 mm OD,SDR-7.4 |
| 224 | f) PN-16 Pipe,50 mm OD,SDR-7.4 |
| 225 | (B) Concealed pipe with cutting chases & making good the walls. SFMC/ FUSION brand or other brand of equivalent quality. a) PN-16 Pipe,16mm OD,SDR-7.4 |
| 226 | b) PN-16 Pipe,20 mm OD,SDR-7.4 |
| 227 | c) PN-16 Pipe,25 mm OD,SDR-7.4 |
| 228 | f) PN-16 Pipe,32 mm OD,SDR-7.4 |
| 229 | e) PN-16 Pipe,40 mm OD,SDR-7.4 |
| 230 | f) PN-16 Pipe,50 mm OD,SDR-7.4 |
| 231 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately). Essco make (Delux/Sumthing spl./Tropical). (a) Bib cock short body |
| 232 | Jaquare make. (i)Standard |
| 233 | Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately). I) Brass stop cock (heavy) of Sant make. (i)15mm dia |
| 234 | (ii)20mm dia |
| 235 | (iii) 25mm dia |
| 236 | (iv)32mm dia |
| 237 | (v) 40mm dia |
| 238 | (vi) 50mm dia |
| 239 | Supplying fitting and fixing push bib cock 15mm dia complete as directed and specified as follows. (pipes will be measured and paid separately). a) C.P.C.H. (a)Light type |
| 240 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Jaguar make. (a) Continental |
| 241 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Makeas specified and directed. a) 50mm dia |
| 242 | b) 40 mm dia. |
| 243 | c) 25 mm dia. |
| 244 | d) 2O mm dia. |
| 245 | e) 15 mm dia. |
| 246 | Supplying and fitting ball valve as specified and directed..a) 25 mm dia. (gun metal) |
| 247 | b) 20mm dia. (gun metal/Copper) |
| 248 | Supplyingfitting and fixing gun metal check valve including necessary threads to pipes. a) 50 mm dia (Heavy type) |
| 249 | b) 40 mm dia (Heavy type) |
| 250 | Supplyingfitting and fixing G.I. Foot valve with strainer including cutting necessary threads to pipes. a) 50 mm dia (Heavy type) |
| 251 | b) 40 mm dia (Heavy type) |
| 252 | Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small tin container(container, scaffolding, tools etc. will have to be arranged by the contractor at his own cost). |
| 253 | Machine boring of deep tube well upto 200 mm dia. Bore hole asdirected by the Engineer in Charge |
| 254 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. PVC PIPE. SUPREME /PRINCE / FUSION /SFMC Brand. viii) 200mm diameter |
| 255 | vii) 160mm diameter |
| 256 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. B) PVC PIPE. SUPREME / PRINCE / FUSION /SFMC Brand.iv) 50mm diameter |
| 257 | Supplyingfitting and fixing ISI approved PVC filter 3.00 metre long. v) 150mm diameter |
| 258 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Makeas specified and directed. a) 50mm dia |
| 259 | Supplyingfitting and fixing check valve (non return valve) including thread to pipes. iv) 50mm diameter |
| 260 | Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained |
| 261 | Flushing, clearing, washing and watering of the tube well |
| 262 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes. 2000 Lt capacity. (a)Sintex make |
| 263 | 1500 litre capacity. (a)Sintex make |
| 264 | 1000 litre capacity. (a)Sintex make |
| 265 | APHE 2008-200915-02-2021: Supplying and packing pea gravel around the periphery of casing including screening washing etc. all complete as directed. |
| 266 | Compacting original ground supporting embankment: Loosening,Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150mm mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300.1 and 300.2 for embankment construction. |
| 267 | Providing laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specificationincluding spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical specification clause 405. A) By manual Means |
| 268 | Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803,1202 & 1203. P.C.C. grade M20. Nominal mix ( 1:2:4 ) |
| 269 | Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80mm and 28 days compressive strength not less than 30 N/m over a layer of bedding sand of compacted thickness 30mm, laid either in stretcher/ running/ herringbone pattern of bonds as directed by the engineer and in proper level and grade and compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and Technical specification clause 1504 of MORD. |
| 270 | Supplying, installation, testing and commissioning of Garbage reducer designed to handle market refusal like mixed solid waste (MSW) Dry & Wet Paper Waste, Cartons Waste, Plastic Waste polyethylene bags,Organic Waste Plastic sheets, plastic scraps etc. effectively by 100 to 150 percent. The system should work without using any electricity or other fuel (taking atmospheric air through a series of magnets). The incinerator should have minimum capacity of reducing 250 kg garbage to 20 to 25 kg per batch of 8 hrs. The equipment should comply all the statutory rules and guidelines of Pollutions Control Board for waste incinerator and obtaining necessary compliance certificate from competent authority will be the responsibility of the supplier/contractor. The scope of work is not only limited to the supply and installation only but also to train the operator at least for seven days. Including fixing of chimney of required height (minimum 6.00 M), related civil and other supporting works (civil works will be measured and paid separately) and complete in al respect up to the level of satisfaction of Engineer in-charge. |
| 271 | Supplying including installation, testing and commissioning ofWater Cooled Jackson Diesel Generator set coupled to suitable alternator of 415 V, AC, 3-Phase 0.8 p.f.(la mounted on a1)M.S. Fabricated base frame.,2)M.S. fuel tank of required capacity.,3)Residual Silencer.,4) AMF/Standard Control Panel.5)Suitable batteries with lead.,5) First fill of lubeoil.,6)Acoustic Enclosure complete with all accessories as specified and directed by the department conforming to IS comprising the following Technical Specification.. (RANGE FROM 15 KVA TO 625 KV. TECHNICAL DATA CJ62D5PGENERATOR SET SPECIFICATIONS 62.5/503. No. of Phases. 3 phase.4. POWER FACTOR 0.8 LAGJACKSON ENGINE SPECIFICATION. 1.make). Cummins2. Model. 53.8-G73. No. of Cylinders. 64. Aspiration. TURBO CHARGEDAIR COOLED5. Cooling. Water Cooled.6. Governor. Mechanical7. Battery Capacity Rating. 1x12 Volt.8. FUEL CONSUMPTION LTR/HR @ 75% LOAD 10.8ALTERNATOR SPECIFICATION. 1.make). CGT (STAMFORD) 2. Voltage Regulation. +/- 1.0%3. Insulation. Class - H.4. Standard Enclosure. IP 23 5. No. of Phases. 3 WITH SRANDARD CONTROL PANEL |
| 272 | Supplying, installation, testing and commissioning of Flow Wrap Banana Packaging Machine comprising of followings:A. Input and Output Conveyor connected to both the ends of shrink tunnel.1. Supporting structure : Stainless steel angled framed structure.2. Roller Dia : 200 mm. 3. Side Rail to protect the tray: Stainless steel angled combined with sheet. 4. Belt : 3mm PVC Green.5. Belt width:24”. 6. Motor : 3 HP 440 volts three phase NEC make motor of AC only. 7. Great Box : Premium, make Greaves or equivalent B. Shrink Tunnel: Auto sleeve wrapper machine, suitable for wrapping Bunch of banana, and any other object at any size with bottom-tray or without bottom-tray, working with BSE-5040A jet PE-film shrink tunnel or other PE shrink tunnel suitable for the purpose of wrapping banana bunches. The machine should have wider packing range and designed according requirement. The machine should have upper and down electromagnetic switch to prevent sealing mistakes, and for better safety, Simple and easy to handle machine to match different packing size, Simple operation and maintenance with high packing efficiency, AC contractor and intelligent temperature controller performs stable, Automatic alarm security system, Large power conveyer motor, with step less speed regulating, ensures smooth feeding, Two large power fans make the temperature of shrink tunnel every even and stable, this ensures the excellent effect of shrinking in one time, Super cooling system cools the packing and makes the figurations perfectly with following specifications:-Power supply 220-240V, 50-60Hz; 1.8KW and tunnel – 440 volt, 6 KWCapacity 0-3 bunch/min. Sealing time/shrink time 0.5-1.5s, 0-0.6sConveyor loading 30kg. Film thickness 0.03-0.25mm. Max. packing dimension (L*W*H) 1800 x 750 x 750mm. Min. packing dimension (L*W*H) 250 x 60 x 60mmMachine size (L*W*H) 2100 x 950 x 2180mm. Weight 275kgs. The equipment should comply all the statutory rules and guidelines of Pollutions Control Board if any and obtaining necessary compliance certificate from competent authority will be the responsibility of the supplier/contractor. The scope of work is not only limited to the supply and installation only but also to train the operator at least for seven days. Including fixing related civil and other supporting works (civil works) will be measured and paid separately) and complete in all respect up to the level of satisfaction of Engineer in-charge. |
| 273 | Supplying installation, testing and commissioning of Passenger Elevator(KONEmakefor 3stop(544 K 8 persons) having contract speed of 0.65 Metre/Sec(approx.)mps serving different floorin the existing lift shaft as per detailed specification enclosed and as under |
| 274 | Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick/ heavy rigid PVC IS: 9537 Part - IIIconduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose(Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete.Short point up to 3.00 metre. length. |
| 275 | Medium point up to 6.00 metre. Length. |
| 276 | Long point up to 10.00 metre. Length. |
| 277 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit(Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark withphenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.Short point up to 3.00 metre. length. Medium point up to 6.00 metre. Length. |
| 278 | Long point up to 10.00 metre. Length. |
| 279 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessedconduit wiring system includingand fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Havells make), GI/ MS switchboard (I.S.I. mark withphenolic laminated sheet cover earth continuity with 2.5 sq. mm cableto the 3rd pin of the socketas required complete with 20 mm. dia. 2mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit(Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.). Extra long point up to 15.00 metre. length. |
| 280 | Extra long point up to 20.00 metre. Length. |
| 281 | Extra long point up to 25.00 metre. Length. |
| 282 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit(Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - IIIconduit. |
| 283 | With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cablein 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - IIIconduit. |
| 284 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts(Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessedPVC20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - IIIconduit. |
| 285 | With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - IIIconduit. |
| 286 | Wiring for 5 pin 6 amp plug with 1.5 sq mmP.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socketas required on the switch board in surface/ recessedP.V.C. conduit wiring system. When fitted on same board of light and fan. |
| 287 | Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete. Short point up to 3.00 metre. length. |
| 288 | Medium point up to 6.00 metre. Length. |
| 289 | Long point up to 10.00 metre. Length. |
| 290 | Supplying and fixing of Call bell ( Buzzer ) including 5/ 6 amp capacity button piano type bell push switch including connection as approved by the Deptt.)as required. [CB] |
| 291 | Fitting and fixing of brackets on the wall in GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover with all accessories such as GI/ MS switch board (ISI marked) with phenolic laminated sheet cover including connection as approved by the Deptt.)as required complete. [BK] |
| 292 | Supplying and fitting of 7/9 Watt LED lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt. |
| 293 | Supplying and fixing of Frosted glass shade of 100 mm dia (Nominal Size as required. |
| 294 | Supplying and fixing of Fan box (AKG or equivalent as approved by the Deptt.)with inbuild rod as required. |
| 295 | Supplying fitting and fixing industrial Plug & Socket in surface mounting SPN sheet steel powder painted MCB DB incorporated with MCB DINrail, neutral link Earth bar of the followingrating of DP MCBcomplete with making necessary connectionetc. as specified and directed by the Deptt.20ACapacity. (ABB, Schneider MG, legrand, Hagermake) |
| 296 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hagermake). 8 way SPN double door |
| 297 | 12 way SPN double door |
| 298 | Supplying with fitting and fixing sheet steel, phosphatised, powder painteddust & vermin proof reversible Double door IP-43 double door surface mounting horizontal TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.ABB, Schneider MG, legrand, Hagermake). 8 way TPN (8+24) double door |
| 299 | Supplying with fitting and fixing MCCB income and MCB outgoing sheet steel, phosphatised, powder painted double door IP-43 surface mounting vertical TPN MCB DB incorporated with bas-bar up to 250A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make). 4 way TPN (4+12) double door |
| 300 | (MCB, MCCB, RCCB, RCBO (ABB, SCHNEIDER MG, LEGRAND, AND HAGER MAKE) &(SCHNEIDER NEO BREAK, C&S, Havells, INDO ASIAN, HPL OR EQUIVALENT MAKE AS PPROVED BY THE DEPTT.)MCB (Conform to IS / IEC 60898-1:200/ MCCB (Conform to IS/IEC 60947- RCCB (Conform to IS/IEC 12640 / 61008): Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.C Series (Schneider MG, legrand, Hagermake). 6 to 32A |
| 301 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hagermake). 6 to 32A |
| 302 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hagermake). 63A |
| 303 | Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DPRCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100/300mA sensitivity DP RCCB(ABB, Schneider MG, legrand, Hagermake) 25A |
| 304 | Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.25 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens, Indo Asian make). 100A |
| 305 | Supply, installation & testing of Copper Plate earth station with600 mmx600 mmx3 mm copper earth plate withnecessary 40 mm dia. G.I. medium duty watering pipewith G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . |
| 306 | Supplying & laying of25X5mmsize G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt. |
| 307 | Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipewith necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mmhinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . |
| 308 | Extra for using salt (5 Kand Charcoal (64 Kin pipeEarth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. |
| 309 | Extra for using salt (5 Kand Charcoal (96 Kin G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt . |
| 310 | Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.)to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. |
| 311 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.)to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. |
| 312 | Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.)to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. |
| 313 | Supplying & laying offollowing25x4mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt. |
| 314 | Supplying & laying of25X5mmsize Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply ofBrass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt. |
| 315 | Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt. |
| 316 | Supply, fitting & fixingof Lighting Finial Arrestor made of 25 mm dia 300 mm long solid Copper tube having 85 mm dia. single prong at top and 3 mm thick base plate at bottom complete with fitting & fixing with Brass nuts & bolts on roof, RCC slab, top of column etc. as specified and directed by the deptt. |
| 317 | Philips model LED Batten 4ft. BN 18 W (bright line) or equivalent as approved by the Deptt. |
| 318 | Philips model LED Batten 4ft. BN 400 W 6500k (stellar bright) or equivalent as approved by the Deptt. |
| 319 | Philips lighiting luminaire 40 W GreenSquare Model RC140B LED29S-6500 PSE WH/RC140B LED28S-4000 PSE WH 220-240V or equivalent as approved by the Deptt. |
| 320 | Supplying including fitting fixing of followingstar rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable,as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make). Energy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make [ F ] |
| 321 | Supplying with fitting & fixing of the following integral type street light luminaries complete and consisting of single piece integral epoxy gray powder coated dia cast aluminium housing gasket, pot optic reflector, cast aluminium frame from heat resistance toughened clear glass cover and accessories such as Condenser, lamp Holder, Ballast,lamp etc.in the existing poleincluding making necessaryconnection as approved by the Deptt.)with 2× 2.50 sq.mm F.R. multistrand and P.V.C. insulated single core copper cable as specified and directed by the department. Philips make) Cat No.SGP 401 1xSONT-250W For Lamp 1xSONT-250W (IP-65) / Wipro make) : WST25250 For lamp 1x250W HPSV (/ Crompton Greaves make) SSSG1225IH/FG For lamp 1x250W HPSV (T) . |
| 322 | Supplying and installation and commissioning of vermin and dust proof totally enclosed double door cubical typecompartmental floor mounting panel board of size 1.20 m ×1.00 m ×0.50 m made of 16 SWG1.66mm) thick CR sheet and 35 mm × 35 mm × 6 mm size angle and 35 mm ×6 mm flat iron having 4 nos legs at the bottom and G.I. Sheet reefing on the top complete painting with 2 coats of red oxide metal primer and 2 coatsof enameled paint. The panel board is to be erected in 1:3:6 RCC pole foundation including excavation of trench and brick soling etc. complete neatly internal wiring done as specified and directed by the department comprising of the following electrical items.1. 40 Amp 4 pole 415 Volt 50 Hz MCCB as incomer - 1 no2. 32 Amp 2 pole open execution with HBC fuse SDFU unit as outgoing - 3 nos.3. 25 mm × 5 mm size 4 strip copper Bus-Bar- 1 set4. 40 Amp 4 pole ON-OFF poser contactor - 1 No.5. Surface mounting timer switch - 1 No.6. 63 Amp bakelite HBC fuse kit-kat - 3 Nos |
| 323 | Supplying including fitting fixing of followingA.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Domestic. Trans Air 300 mm sweep (Cromptonmake) [ EF ] |
| 324 | Supplying including fitting fixing of following A.C. Wall fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. ORIENT make or equivalent Usha make. Air Circulator wall fan 450 mm sweep Turbo force |
| 325 | Supplyingfittingand fixing of ceiling fan Regulator including connections etc. complete as required complete and as directed by the department.Electronic StepType |
| 326 | Supplying with installation testing and commissioning of Hi -- wall 4 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department. 1.5 Ton capacity. (Blue Star make) Model 4WAE181YA |
| 327 | Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (SKYLAND / Vee-Dee / V GUARD / VERTEX/ INDO/ VENUS make). 4.0 KVA Automatic Input 90-280 V Out put 200-240 V |
| 328 | Supplying including installation of the Octagonal poles shall be designed to withstand themaximumwind speed of 169 km/hr. The top loading i.e. area and weight of fixtures are to be considered to calculate maximum deflectionof the poles and the same shall meet the requirement of BS:5649 Part VI 1982. The pole shaft shall have octagonal cross section and shall be continuouslytapered with single longitudinal welding. There shall not be any circumferentialwelding of the pole shaft. The welding of the pole shaft shall be done bySubmerged Welding process. All octagonal pole shafts shall be provided with the rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. The baseplate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside. The welding shall be done as per process approvedby Third Party Inspection agency. (BAJAJ/ PHILIPS/ VALMONT/ PARUTHI ENGR/Nezonemake)Pole Type BOP or equivalent-1030 Height10 mThe materials of the pole as follows : Conforming to grade S355JOConforming to grade S355JO, Base Plate :- Fe 410 Conforming to IS 226/ IS 2062, Foundation Bolts :- 6.8 Gr. As per IS 1367, Pole Sections:- The Octagonal Poles shall be in single piece with single longitudinal welding join. Galvanization:- The poles shall be hot dip galvanized as perIS 2629 / IS 2633 / IS 4759 standards with averagecoating thickness of 65 micron. The galvanizing shall be done in single dipping. Door opening :-The Octagonal poles shall have door of approximate500 mm length at the elevation of 500 mm from thebase plate. The door shall be vandal resistance and shall be weather proof to ensure safety of insideconnection as approved by the Depts.. The door shall be flush with the exteriorsurface and shall have suitable locking arrangement. The pole shall be adequately strengthened at thelocation of the door compensate for the loss in section. There shall also be suitable arrangement for thepurpose of earthing, Smart pack Junction box with 6 MCB & Terminals for mounting inside base compartment of Pole. Top Dia. :- (A/70, Bottom Dia.:- (A/175, SheetThickness :- 3mm, Base Plate Dimensions :-(L x B x 275 x 275 x 16, Foundation BoltSize:- (no. x dia.)4 x 24 Dia, Pitch Circle Dia. (PC :- 270, Bolt Length:- 750, Projected Bolt Length :-125, Anchor plate thickness :- 4 mm, Pole Foundation :-The octagonal poles shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. Foundation :- The foundation shall be done with (Earth work :- 2.04 cubic Meters.RCC:- 1:1.5 : 3 proportion 0.65 cubic metres.Steel:-22.43 Kg. Shuttering:- 4.32 square metres. = 22.43 Kg. |
| 329 | Supplying including fitting and fixing of Hot Dip galvanised arm bracket for installation of luminaries.Header with top cap 300 mm long pipeof thickness 3 with arrangementto fix on pole top with 3 Nos. of bolts. iArmed of required length size 48.3mm out side dia x 3.25mm thick (BAJAJ/ PHILIPS/ VALMONT/ PARUTHI ENGR/Nezonemake) Stiffener plate from arm of the following types :Single arm bracket 1000mm long for 3m to 10 metre. Poles. |
| 330 | Supplying and fitting fixing of electric storage water heater [Geyser] of VENUS/RAMSON/RACOLD/V Guard/ HAIER or equivalent make) including necessary connection etc. as required complete and as directed by the Department. Vertical. 25 Litre Capacity |
| 331 | Supplying including installation, connection as approved by the Deptt., testing and commissioning of CENTRIFUGAL MONOBLOCK PUMP SET complete as directed and specified by the deptt. 3 HP single Phase Centrifugal monoblock pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guardmake)2900 rpm with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemensmake) . |
| 332 | Supplying including installation, connection as approved by the Deptt., testing and commissioning of SUBMERSIBLE PUMP SET3 (Three Phase)with steel cable rope and submersible cable complete as directed and specified by the deptt. Three phase Submersible motor pump set(Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guarsuitable for 100 mm bore well and above. 5 HP STAGE 14 to 50 with MCB controlled Submersible motor pump setcontrol panel. |
| 333 | Supplying with fitting and fixing sheet steel cable junction box of size 40cm x 20cm x 15 cm made of 16 SWG thick MS Sheet with provision for hinge door and panel locking arrangement complete painted with 2 coats of metal primer and 2 coats of enamelled gloss paint of approved brand and manufacture to give an even shape including cleaning surface to remove of all dirt, dust and other foreign matter, the box is to be fitted on the bottom section of pole with minimum165 mm dia 25 mm x 5mm size flat iron pole clamp complete with making necessary connection as directed consisting of the following electrical items.12mm x 2mm x 15cm long 2 strip copper Bus Bar - 1 set6-32 Amp \"L\" series DP MCB - 1 No.6 amp \"L\" series SP MCB as outgoing - 2 Nos. |
| 334 | Supply, Installation antistatic rubber mat suitable for 1.1 KV Voltage grade |
| 335 | Supply, Fitting Fixing of Shock Treatment Chart |
| 336 | Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1)1988 laid in air or through existing cable trench/duct/ cable tray/ HDPE pipeincluding fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make). 3 Core A2XWY A2XFY. 4.00 Sq.mm 3 Core armoured U.G. cable |
| 337 | 6.00 Sq.mm 3 Core armoured U.G. cable |
| 338 | 3 & 1/2 Core A2XFY. 25.00 Sq. mm.3 & 1/2 Core armoured U.G. cable |
| 339 | 70.00 Sq.mm 3&1/2 Corearmoured U.G. cable |
| 340 | 300.00 Sq. mm.3 & 1/2 Core armoured U.G. cable |
| 341 | Core - 3.5 A2XFY.70 Sq.mm 3 and 1/2 core armoured cable |
| 342 | 3 Core A2XWY A2XFY.10.00 Sq.mm 3 Core armoured U.G. cable |
| 343 | Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1)1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch,through medium duty G.I. pipe(Tata/ Nezonemake or equivalent as approved by the Deptt)bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make). Core - 3 A2XWY A2XFY. 4.00 Sq.mm 3 Core U.G. cable in 25mm dia medium duty G.I. pipe |
| 344 | 6.00 Sq.mm 3 Core U.G. cable in 32mm dia medium duty G.I. pipe |
| 345 | 25.00 Sq.mm 3&1/2 Core U.G. cable in 40mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) |
| 346 | 70.00 Sq.mm 3&1/2 Core U.G. cable in 50mm dia medium duty G.I. pipe |
| 347 | 300.00 Sq.mm 3&1/2 Core U.G. cable in 100mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) |
| 348 | 10.00 Sq.mm 3 Core U.G. cable in 25mm dia medium duty G.I. pipe |
| 349 | Supply and laying of following numbers and size of armoured cable in same trench, PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 1 Core A2XWY. 4x300.00 Sq. mm. 1 Core armoured U.G. cable |
| 350 | Supplying including installation of cast iron cable marker as specified and directed by the deptt. |
| 351 | Supply including fitting and fixing of 1.1 KV PVC/XLPE cable INDOOR/OUTDOOR end termination Kits (Raychem RPG make) HEAT SHRINK TYPE including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 185-300 Sq.mm.,1 Core cable. |
| 352 | Supply, Fitting Fixing of Shock Treatment Chart |
| 353 | Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG/STRUTFASTmake). Size of Tray. 304 |
| 354 | Supplying and fitting fixing of H.T./L. T. danger plate complete as required and as directed by the department. |
| 355 | Supplying and installation of metal enclosed wall/floor mounted front operated cubical type switch gear panel suitable for indoor installation conforming to IS: 8623 (Part I & II). The Panel should be made of sheet steel and thickness not less than 2mm and structural steel having light section. The panel shall be completely dust tight and vermin proof and shall be painted with anti corrosive and anti condensation type two coats of primer and two coats of paint. All wiring shall be PVC insulated and PVC sheathed of 1100 volt grade of required size. The panel should have provision of entry of cable at the bottom and also provision of out going feeders from the bottom of the panel. The bus bar shall be of high quality copper of uniform cross section. The panel shall consist of the following items (viz. voltmeter, ammeter, CT, indicating lamps, selector switch etc.) connected as per drawing and shall be flush mounted on the front of the panel.Incommer: 250 A ,4P, MCCB, 25 KA - 1 No. 100 A, 4P, MCCB, 36 KA - 2 Nos.Digital Ammeter - 2 Nos. Digital Voltmeter -2 NosCT 250/5 -1 Set. CT 100/5 -1 Set. CT 100/5 -1 Set. Switch Fuse Unit - 6 NosSelector Switch - 4 Nos. Indicating Lamp 2 SetsBus-Bars: 480 A TPN electrolytic Copper Bus Bar of uniform cross-section (30mmx10mm) – 1 set.Bus-Bars: 220 A TPN electrolytic Copper Bus Bar of uniform cross-section (25mmx5mm) – 1 setOutgoing:100 A 4P MCCB 25 KA –1 No. 40 A 4P MCCB 25 KA –1 No.63A 4P MCB - 2 Nos. 40A 4P MCB - 3 Nos. 40A DP MCB - 3 Nos32A DP MCB - 12 Nos. |
| 356 | Supplying, installation, testing and Commission of the following outdoor flood light of LED/ MH / HPSV luminaries complete with all accessories such as ballast, capacitor,ignitor and driver as required complete with necessary support / foundation with 2.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department. Supply, installation and testing of ceilling hanging mounted LED Wellglass Luminaire with the option for fixed/ adjustable and IP65 competable of make WIPRO Cat No. LE02-441-XXX-57-OP35WATT LED WH or equivalent. Rate to include cost of lamps.[CH] |
| 357 | Supplying, installation, testing and commissioning of the following LED luminaries complete with all accessories such as ballast, starter etc. in the ceiling including Y type suspension arrangement as specified by the manufacturer, and fixing the same on ceiling by perfect arrangement for load bearing as well as, to be match with the colour and design of the ceiling, of required length [max. 1.5 m] including making necessary connection cable, as approved by the Deptt.)with 1.5 sq mm.PVC.insulated.S.C.copper conductor as required and as directed by the department. department. Supply, installation and testing of recessed mounted LED down lights with the option for fixed/ adjustable and spot options of make Philips Cat No. DN311B LED65-5000PSU MB WH or equivalent. Rate to include cost of lamps.[WL] |
| 358 | Philips LED Tubes Model MAS LED tube STD 1200mm 15W840 T8 I/MAS LED tube 1200mm 15W865 T8 I/MAS LED tube STD 1200mm 15W865 T8 I/IN or equivalent as approved by the Deptt. |
| 359 | Supplying, installation, testing and commissioning of the following prewired CFL/Flourescent luminaries complete with all accessories such as ballast, starter etc. directly on wall/ceilling including connection with 1.5 sq. mm PVC insulated single core copper conductor as reqd. and as directed by the Deptt. Recessed type Night Lamp / Skirting Light of reputed make with 1 no. of5W CFL lamp (warm white lamp). (NL) |
| 360 | Supply, Installation antistatic rubber mat suitable for 1.1 KV Voltage grade |
| 361 | Supply, Fitting Fixing of Shock Treatment Chart |
AI Tender Summary
Tender Timeline
Jun 22, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 08, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender