Purchase Of Lab Equipment For Chemical Engineering Plate Heat Echanger , Helical Coil Heat Exchanger , Fluidized Bed Dryer , Trickle Bed Reactor And Isothermal Batch Reactor
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Jul 2021
0 days left
EMD
22600
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
DCRUST MURTHAL (SONEPAT) → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Purchase Of Lab Equipment For Chemical Engineering Plate Heat Echanger , Helical Coil Heat Exchanger , Fluidized Bed Dryer , Trickle Bed Reactor And Isothermal Batch Reactor
BOQ
| Name of Work:- Lab equipment for Chemical Engineering Department under University Fund. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description (As per DNIT / Tender document) | Item Code / Make | Quantity | Units | |
| 1 | 1 | Plate heat exchanger\n• System: Water to Water\n• Plates: Material Stainless Steel, 6 Nos.\nLength 425 mm, Width 125 mm (approx.)\n• Frame: Rigid MS Structure\n• Water Flow Measurement: By Rotameter (2Nos.) one each for cold & hot fluid.\n• Hot Water Tank: Made of Stainless steel, Double Wall, Insulated with ceramic wool.\n• Hot Water Circulation: Magnetic Pump. \n• Heaters: Nichrome wire heater.\n• Control panel comprising of:\nDigital Temp. Controller : PID Controller, 0-199.9°C, (For Hot Water Tank)\nDigital Temp. Indicator: 0-199.9°C, with multi-channel switch \nTemperature Sensors: RTD PT-100 type.-4Nos.\nWith Standard make On/Off switch, Mains Indicator etc.\n• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus\n• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint. \n | 1 | Each | |
| 2 | 2 | Helical coil heat exchanger\n• System: Water to Water.\n• Shell: Material Stainless steel. Insulated with ceramic wool and cladded with aluminum foil.\nDia. 220 mm, Length 500 mm (Approx.)\n• Tube: ID 13 mm, OD 16mm approx., Coil Type\n• Water Flow Measurement: Rotameters (2Nos.) one each for cold & hot fluid.\n• Hot Water Tank: Made of Stainless steel Insulated with ceramic fibre wool.\n• Hot Water Circulation: Magnetic Pump \n• Heaters: Nichrome wire heater (2 Nos.)\n• Control panel comprising of:\nDigital Temp. Controller : PID Controller, 0-199.9°C, (For Hot Water Tank)\nDigital Temp. Indicator: 0-199.9°C, with multi-channel switch \nTemperature sensors: RTD PT-100 type.\nWith Standard make On/Off switch, Mains Indicator etc.\n• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus\n• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint. \n | 1 | Each | |
| 3 | 3 | Fluidized bed dryer\n• Reactor Column: Material Borosilicate glass\nDiameter 25mm (approx.), Length: 1 m (approx.). \n• Packing: Catalyst (Fluidized Bed Type)\n• Feed Tank (1Nos.): Material Stainless Steel, Capacity - 20 Ltrs, Double walled with heating arrangement\n• Heater : Nichrome wire \n• Flow Measurement: Rotameter\n• Piping : Stainless Steel and PVC.\n• Feed Circulation: Magnetic Pump of Poly propylene.\n• Control panel comprising of:\nDigital Temp. Controller : PID Controller, 0-199°C (For Hot Water Tank)\nWith Standard make On/Off switch, Mains Indicator & fuse etc.\n• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus\n• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint\n | 1 | Each | |
| 4 | 4 | Trickle Bed Reactor\n• Packed Bed: Material Borosilicate Glass\nDia. 80mm, Height 600mm\n• Packings: Glass Beads Dia. 3mm/Rasching Rings, size 8-10mm\n• Flow measurement: By Rotameter-2Nos. (One each for water and air).\n• Liquid Feed Tank: Material Stainless Steel, Capacity 60 Ltrs. (Approx.)\n• Feed Circulation: Centrifugal Pump, FHP Crompton/Standard make.\n• Air Tank: Compatible Capacity.\n• Pressure Regulator (2 Nos.): Operating range 0-2 kg/cm2 and 0-10 kg/cm2\n• Pressure Gauge : Bourdon Type.\n• Mixing Chamber: Material Stainless Steel, Compatible Capacity (For Air & Water).\n• Liquid Catch Pot: Material Stainless Steel, Compatible Capacity.\n• Solenoid Valve: 2Nos. (One each at Liquid and air inlet).\n• Manometers: Compatible capacity.\n• Piping : Material Stainless Steel and PVC/PU pipe\n• Control Valves: Material Gun Metal/Brass\n• Control panel comprising of: \nStandard make on off switch, Mains Indicator etc.\n• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus\n• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint. \n | 1 | Each | |
| 5 | 5 | Isothermal Batch Reactor\n• Reactor: Material Stainless Steel, Volume 2 Ltrs. (Approx.)\n• Water Bath: Material Stainless Steel, Double wall, insulated with Ceramic wool.\n• Heater : Nichrome wire Heater\n• Stirrer (2Nos.): Stainless Steel Impeller and shaft coupled with FHP motor.\n• Temp. Sensor: RTD PT-100 type\n• Control panel comprises of :\nDigital Temp. Controller : PID Controller, 0-199.9°C (For Water Bath)\nWith Standard make on/off switch, Mains Indicator etc.\n• An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus\n• The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint. \n | 1 | Each |
AI Tender Summary
Tender Timeline
Jun 22, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 12, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 14, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender