Military Engineer Services-MES has published Preventive Maint To Centrifugal And Submersible Pumps Lt Panels Amf Panels And Connected Items At Booster And Tws In Sector C Under Ge Utility Ambala Cantt. Submission Date for this Tender is 19-07-2021. Electrical Panel Tenders in AMBALA CANTT Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Jul-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-07-2021 |
| Name of Work : PREVENTIVE MAINT TO CENTRIFUGAL AND SUBMERSIBLE PUMPS, LT PANELS, AMF PANELS AND CONNECTED ITEMS AT BOOSTER AND TWs IN SECTOR ‘C’ UNDER GE UTILITY AMBALA CANTT. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Disconnecting all electrical connections from electric motor 120 HP installed at sec 'C' and decoupling from pump assembly and dismantling from foundation and transporting to local workshop approved by Accepting Officer for opening the motor taking out of burnt winding and thorough cleaning of the slotes, rewinding the complete motor with supper enamaled copper wire of same size and provn of supper quality insulating materials, warnishing, replacing the bearing sets and cooling fans if required and drying and taking back from wksp including laths and other any type of machine work such as rotor work, welding, metalling, machining and grinding for bearing sheet etc and mounting, connecting all electrical connections alongwith reassembling pump set and testing complete all as directed by Engr-in-Charge. NOTE: Rewinding amount of motor will be paid to the contractor once only irrespective of how many number of times motor rewinded . | 2 | Each | |
| 2 | 2 | Description all as per item No. 1.00 above but 100 HP motor and ditto- | 1 | Each | |
| 3 | 3 | Description all as per item No. 1.00 here-in before but 75 HP motor and ditto- | 2 | Each | |
| 4 | 4 | Description all as per item No. 1.00 here-in before but 60 HP motor and ditto- | 3 | Each | |
| 5 | 5 | Description all as per item No. 1.00 here-in before but 50 HP motor including 03 Nos vertical turbine motor and ditto- | 4 | Each | |
| 6 | 6 | Description all as per item No. 1.00 here-in before but 40 HP motor and ditto- | 2 | Each | |
| 7 | 7 | Description all as per item No. 1.00 here-in before but 30 HP motor and ditto- | 2 | Each | |
| 8 | 8 | Description all as per item No. 1.00 here-in before but 25 HP motor and ditto- | 4 | Each | |
| 9 | 9 | Description all as per item No. 1.00 here-in before but 10 HP motor and ditto- | 3 | Each | |
| 10 | 10 | Description all as per item No. 1.00 here-in before but 10 HP sludge motor and ditto- | 2 | Each | |
| 11 | 11 | Description all as per item No. 1.00 here-in before but 7.5 HP sludge motor and ditto- | 2 | Each | |
| 12 | 12 | Description all as per item No. 1.00 here-in before but 5 HP motor and ditto- | 5 | Each | |
| 13 | 13 | Decoupling of centrifugal pump/Raw water turbine pump from electric motor, dismantling from the foundation and shifting to local workshop approved by Accpeting Officer for opening the pumps for checking and rectification of defects by welding/threading/cutting/replacing defective parts which shall be measured and paid separately as supply only herein after including transporting back and refixing and testing complete for Model No : DSM 125/40 Make: Kirloskar all as specified and directed. | 2 | Each Job | |
| 14 | 14 | Description all as per item No.13.00 above but for Model No : DSM 100/36 Make: Kirloskar | 2 | Each Job | |
| 15 | 15 | Description all as per item No. 13.00 here-in before but for Model No : DB 125/26 Make: Kirloskar | 4 | Each Job | |
| 16 | 16 | Description all as per item No.13.00 here-in before but for Model No : UP 80/38 Make: Kirloskar or Raw water turbine pump | 4 | Each Job | |
| 17 | 17 | Description all as per item No. 13.00 here-in before but for Model No : SCT 80/38 Make: Kirloskar | 2 | Each Job | |
| 18 | 18 | Description all as per item No. 13.00 here-in before but for Model No : SP4LA Make: Kirloskar | 4 | Each Job | |
| 19 | 19 | Description all as per item No. 13.00 here-in before but for Model No : 4/5 2STGMEDIMKI Make: Mather Platt/Vacuum Centrifugal Pump | 4 | Each Job | |
| 20 | 20 | Supply only upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : DSM 125/40 Make: Kirloskar. \nNote: Contractor shall deposit all the replaced parts to the MES store. | 1 | Each | |
| 21 | 21 | Description all as per item No. 20.00 above but CI impeller with bush bed | 1 | Each | |
| 22 | 22 | Description all as per item No. 20.00 here-in before but Pump Shaft | 1 | Each | |
| 23 | 23 | Description all as per item No. 20.00 here-in before but Wear Ring | 1 | Each | |
| 24 | 24 | Description all as per item No. 20.00 here-in before but Shaft Sleeve DE/NDE and its O Ring | 1 | Each Set | |
| 25 | 25 | Description all as per item No. 20.00 here-in before but Gland packing with its studs and Hexa nuts | 1 | Each Set | |
| 26 | 26 | Description all as per item No. 20.00 here-in before but lantern ring, Oil seal & O Ring | 1 | Each Set | |
| 27 | 27 | Description all as per item No. 20.00 here-in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, bearing sheet, shoulder rings, grease nipple and all its connected items | 1 | Each Job | |
| 28 | 28 | Description all as per item No. 20.00 here-in before but Impeller Key | 1 | Each | |
| 29 | 29 | Description all as per item No. 20.00 here-in before but Coupling Key | 1 | Each | |
| 30 | 30 | Supply only upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : DSM 100/36 NOTE: Contractor shall deposit all the replaced parts to the MES store. | 1 | Each | |
| 31 | 31 | Description all as per item No. 30.00 above but CI impeller with bush bed | 1 | Each | |
| 32 | 32 | Description all as per item No. 30.00 here-in before but Pump Shaft | 1 | Each | |
| 33 | 33 | Description all as per item No. 30.00 here-in before but Wear Ring | 1 | Each | |
| 34 | 34 | Description all as per item No. 30.00 here-in before but Shaft Sleeve DE/NDE and its O Ring | 1 | Each Set | |
| 35 | 35 | Description all as per item No. 30.00 here-in before but Gland packing with its studs and Hexa nuts | 1 | Each Set | |
| 36 | 36 | Description all as per item No. 30.00 here-in before but lantern ring, Oil seal & O Ring | 1 | Each Set | |
| 37 | 37 | Description all as per item No. 30.00 here-in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, bearing sheet, shoulder rings, grease nipple and all its connected items | 1 | Each Job | |
| 38 | 38 | Description all as per item No. 30.00 above but Impeller Key | 1 | Each | |
| 39 | 39 | Description all as per item No. 30.00 here-in before but Coupling Key | 1 | Each | |
| 40 | 40 | Supply only upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : DSM 125/26 \nNote : Contractor shall deposit all the replaced parts to the MES store. | 1 | Each | |
| 41 | 41 | Description all as per item No. 40.00 above but CI impeller with bush bed | 1 | Each | |
| 42 | 42 | Description all as per item No. 40.00 here-in before but Pump Shaft | 1 | Each | |
| 43 | 43 | Description all as per item No. 40.00 here-in before but Wear Ring | 1 | Each | |
| 44 | 44 | Description all as per item No. 40.00 here-in before but Shaft Sleeve DE/NDE and its O Ring | 1 | Each Set | |
| 45 | 45 | Description all as per item No. 40.00 here-in before but Gland packing with its studs and Hexa nuts | 1 | Each Set | |
| 46 | 46 | Description all as per item No. 40.00 here-in before but lantern ring, Oil seal & O Ring | 1 | Each Set | |
| 47 | 47 | Description all as per item No. 40.00 here-in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, bearing sheet, shoulder rings, grease nipple and all its connected items | 1 | Each Job | |
| 48 | 48 | Description all as per item No. 40.00 here-in before but Impeller Key | 1 | Each | |
| 49 | 49 | Description all as per item No. 40.00 here-in before but Coupling Key | 1 | Each | |
| 50 | 50 | Supply only upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : UP 80/38 Make: Kirloskar or Raw water turbine pump.\nNote: Contractor shall deposit all the replaced parts to the MES store. | 1 | Each | |
| 51 | 51 | Description all as per item No. 50.00 above but CI impeller with bush bed | 1 | Each | |
| 52 | 52 | Description all as per item No. 50.00 here-in before but Pump Shaft | 1 | Each | |
| 53 | 53 | Description all as per item No. 50.00 here-in before but Wear Ring | 1 | Each | |
| 54 | 54 | Description all as per item No. 50.00 here-in before but Shaft Sleeve DE/NDE and its O Ring | 1 | Each Set | |
| 55 | 55 | Description all as per item No. 50.00 here-in before but Gland packing with its studs and Hexa nuts | 1 | Each Set | |
| 56 | 56 | Description all as per item No. 50.00 here-in before but lantern ring, Oil seal & O Ring | 1 | Each Set | |
| 57 | 57 | Description all as per item No. 50.00 here-in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, shoulder rings, bearing sheet, grease nipple and all its connected items | 1 | Each Job | |
| 58 | 58 | Description all as per item No. 50.00 here-in before but Impeller Key | 1 | Each | |
| 59 | 59 | Description all as per item No. 50.00 here-in before but Coupling Key | 1 | Each | |
| 60 | 60 | Supply only upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : SCT 80/38 \nNote: Contractor shall deposit all the replaced parts to the MES store. | 1 | Each | |
| 61 | 61 | Description all as per item No. 60.00 above but CI impeller with bush bed | 1 | Each | |
| 62 | 62 | Description all as per item No. 60.00 here-in before but Pump Shaft | 1 | Each | |
| 63 | 63 | Description all as per item No. 60.00 here-in before but Wear Ring | 1 | Each | |
| 64 | 64 | Description all as per item No. 60.00 here-in before but Shaft Sleeve DE/NDE and its O Ring | 1 | Each Set | |
| 65 | 65 | Description all as per item No. 60.00 here-in before but Gland packing with its studs and Hexa nuts | 1 | Each Set | |
| 66 | 66 | Description all as per item No. 60.00 here-in before but lantern ring, Oil seal & O Ring | 1 | Each Set | |
| 67 | 67 | Description all as per item No. 60.00 here-in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, shoulder rings, beaing sheet, grease nipple and all its connected items | 1 | Each Job | |
| 68 | 68 | Description all as per item No. 60.00 here-in before but Impeller Key | 1 | Each | |
| 69 | 69 | Description all as per item No. 60.00 here-in before but Coupling Key | 1 | Each | |
| 70 | 70 | Supply only upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : SP4LA \nNote: Contractor shall deposit all the replaced parts to the MES store. | 1 | Each | |
| 71 | 71 | Description all as per item No. 70.00 above but CI impeller with bush bed | 1 | Each | |
| 72 | 72 | Description all as per item No. 70.00 here-in before but Pump Shaft | 1 | Each | |
| 73 | 73 | Description all as per item No. 70.00 here-in before but Wear Ring | 1 | Each | |
| 74 | 74 | Description all as per item No. 70.00 here-in before but Shaft Sleeve DE/NDE and its O Ring | 1 | Each Set | |
| 75 | 75 | Description all as per item No. 70.00 here-in before but Gland packing with its studs and Hexa nuts | 1 | Each Set | |
| 76 | 76 | Description all as per item No.70.00 here-in before but lantern ring, Oil seal & O Ring | 1 | Each Set | |
| 77 | 77 | Description all as per item No. 70.00 here-in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, shoulder rings, bearing sheet, grease nipple and all its connected items | 1 | Each Job | |
| 78 | 78 | Description all as per item No. 70.00 here-in before but Impeller Key | 1 | Each | |
| 79 | 79 | Description all as per item No. 70.00 here-in before but Coupling Key | 1 | Each | |
| 80 | 80 | Supply only upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : 4/5 2STGMEDIMK \nNote: Contractor shall deposit all the replaced parts to the MES store. | 1 | Each | |
| 81 | 81 | Description all as per item No. 80.00 above but CI impeller with bush bed | 1 | Each | |
| 82 | 82 | Description all as per item No. 80.00 here-in before but Pump Shaft | 1 | Each | |
| 83 | 83 | Description all as per item No. 80.00 here-in before but Wear Ring | 1 | Each | |
| 84 | 84 | Description all as per item No. 80.00 here-in before but Shaft Sleeve DE/NDE and its O Ring | 1 | Each Set | |
| 85 | 85 | Description all as per item No. 80.00 here-in before but Gland packing with its studs and Hexa nuts | 1 | Each Set | |
| 86 | 86 | Description all as per item No.80 above but lantern ring, Oil seal & O Ring | 1 | Each Set | |
| 87 | 87 | Description all as per item No. 80.00 here-in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, shoulder rings, bearing sheet, grease nipple and all its connected items | 1 | Each Job | |
| 88 | 88 | Description all as per item No. 80.00 here-in before but Impeller Key | 1 | Each | |
| 89 | 89 | Description all as per item No. 80.00 here-in before but Coupling Key | 1 | Each | |
| 90 | 90 | Supply & fix in replacement digital volt meter of range 0-500V of size 96x96 mm with selector switch complete all as directed by Engr-in-Charge. | 9 | Each | |
| 91 | 91 | Supply & fix in replacement digital Amp meter of range 0-200Amp of size 96x96 mm with selector switch complete all as directed by Engr-in-Charge. | 9 | Each | |
| 92 | 92 | Supply & fix in replacement gland packing for centrifugal pump Model No : DSM 125/40 Make: Kirloskar complete all as specified and directed by Engr-in-Charge. | 6 | Each Job | |
| 93 | 93 | Description all as per item No. 92.00 above but for centrifugal pump Model No : DB 125/26 Make: Kirloskar | 6 | Each Job | |
| 94 | 94 | Description all as per item No. 92.00 here-in before but for centrifugal pump Model No :DSM 100/36 Make: Kirloskar | 7 | Each Job | |
| 95 | 95 | Description all as per item No. 92.00 here-in before but for centrifugal pump Model No : UP 80/38 Make: Kirloskar | 6 | Each Job | |
| 96 | 96 | Description all as per item No. 92.00 here-in before but for centrifugal pump Model No : SCT 80/38 Make: Kirloskar | 5 | Each Job | |
| 97 | 97 | Description all as per item No. 92.00 here-in before but for centrifugal pump Model No :SP4LA Make: Kirloskar | 4 | Each Job | |
| 98 | 98 | Description all as per item No. 92.00 here-in before but for centrifugal pump Model No : 4/5 2STGMEDIMKI Make: Mather Platt | 4 | Each Job | |
| 99 | 99 | Scraping old existing paint from Pump Set of cap. 5 to 10 HP, motor and channel including making smooth surface by filling putty and applying one coat of synthetic enamel paint of approved colour as directed by Engr-in-charge. | 15 | Each Job | |
| 100 | 100 | Description all as per item No. 99.00 here-in before but Pump Set of cap. 25 HP and ditto- | 5 | Each Job | |
| 101 | 101 | Description all as per item No. 99.00 here-in before but Pump Set of cap. 60 to 75 HP and ditto- | 12 | Each Job | |
| 102 | 102 | Description all as per item No. 99.00 here-in before but Pump Set of cap. 100 to 120 HP and ditto- | 4 | Each Job | |
| 103 | 103 | Scraping old existing paint from pipe of any dia installation including making smooth surface by filling putty and applying one coat of synthetic enamel paint of approved blue colour incl marking of inlet/outlet etc with the help of white colour as directed by Engr-in-charge. | 150 | Sqm | |
| 104 | 104 | Preparation of old surfaces of CI pipe 100mm bore pertains to OHTs by removing old paint and applying one coat of synthetic enamel paint on all external surfaces of CI/DI pipe for rising supply, overflow and washout 100mm bore vertical length including necessary scaffolding and other arrangement required for painting complete all as specified and directed. | 300 | RM | |
| 105 | 105 | Description all as per item No 104.00 above but for 150/200 mm dia pipe | 1000 | RM | |
| 106 | 106 | Supply & fix in replacement electronic motor protection relay fully protection from over current, under current, Phase loss, Phase reverse, Auto/manual reset input 1A to 5A through CT adjustable Trip complete suitable for upto 120 HP motor starter all as specified and directed. | 15 | Each | |
| 107 | 107 | Supply & fixing of rubber coupling TC-13, TC-14, TC-19, TC-22 and as per existing required for centrifugal pump sets complete as specified and directed by Engr-in-Charge. | 15 | Each | |
| 108 | 108 | Supply and fixing of metal coupling for centrifugal pump sets complete suitable for existing pump sets as specified and directed by Engr-in-Charge. | 2 | Each | |
| 109 | 109 | Repairing the LT control starter panel/AMF panel of the centrifugal pump and motor by disconnecting the cable, removing u/s parts of the panel, wiring and replacement of u/s wiring and parts under respective items including cleaning by vacuum cleaner, thimble, testing the panels on load complete as specified and as directed by Engr-in-Charge. | 35 | Each | |
| 110 | 110 | Supply and fix in replacement of Power contactor 3 pole MNX 25 or MC10DN, series A1, AC3,40A, for 25HP/30HP AC rating 40 Amp, 220 V complete suitable for existing starter all as specified . | 6 | Each | |
| 111 | 111 | Supply and fix in replacement Power contactor 3 pole, MNX A1-A2, 30 KW and 40 KW AC rating upto 80 Amp, 220 V complete suitable for existing starter all as specified | 12 | Each | |
| 112 | 112 | Supply and fix in replacement Power contactor 3 pole, MNX 70, 45 KW AC rating upto 80 Amp, 220 V complete suitable for existing starter all as specified | 12 | Each | |
| 113 | 113 | Supply and fix in replacement Power contactor 3 pole, BCH MCE15M, series A1, 75 HP AC rating upto 100 Amp, 220 V complete suitable for existing starter all as specified. | 8 | Each | |
| 114 | 114 | Supply and fix in replacement Power contactor 3 pole, BCH MCE15M series A1, AC3,110A 120 HP AC rating upto 150 Amp, 220 V complete suitable for existing starter all as specified. | 4 | Each | |
| 115 | 115 | Supply and fix in replacement timer switch type ST 100 suitable for 240 Volts with mounting kit of capacity 3-30Sec, 50 Hz complete as as specified. | 12 | Each | |
| 116 | 116 | Supply and fix in replacement Single phase preventor/Phase sequence corrector for upto 120 HP motor or AC rating upto 160 Amp, 415 VAC, 50 Hz (VSP2) complete suitable for existing starters all as specified. | 15 | Each | |
| 117 | 117 | Supply & fix in replacement of PVC insulated copper cable of size 16 sqmm, heavy duty 1100 volt, 3.5 core, multi stranded with proper size of copper lugs including flexible conduit as directed by Engr-in-Charge. | 50 | RM | |
| 118 | 118 | Description all as per item No. 117.00 above but size of cable 25 Sqmm | 60 | RM | |
| 119 | 119 | Description all as per item No. 117.00 here-in before but size of cable 70 Sqmm | 50 | RM | |
| 120 | 120 | Description all as per item No. 117.00 here-in before but size of cable 95 Sqmm | 30 | RM | |
| 121 | 121 | Disconnecting of electric supply from star delta starter of defective submersible pumping set and taking out pump set of capacity 50 HP with motor from bore well including column pipe,submersible cable and other accessories etc and relowering and commissioning and testing the same after repairing of submersible pump set straighting ring, jointing, welding, turning and polishing to pump shaft any size CI/GM impeller CI bowl, making key with key way & other replacement of worn out parts with new on laths & other any type of machine work is reqd at site including replacement of 5/8" nuts & bolts rubber gasket of column pipe fixing of spares and reassembling pump set complete after repair connecting & testing all as directed by Engr-in-Charge.\nNote :- (i) Spare parts will be measured and paid separately as supply only here-in-after.\n(ii) Transportation of pump sets from site to workshops and vice versa shall be deemed to be included in the unit quoted rate.\n(iii) T & P required at site will be arranged by the contractor. | 1 | Each Job | |
| 122 | 122 | Rewinding of submersible motor of 50 HP capacity with super enameled insulated copper wire as per existing gauge with other winding material including cleaning of stator, slots replacement of defective components and parts complete all as directed by the Engr-in-Charge.\n | 1 | Each Job | |
| 123 | 123 | Description all as per item No. 122.00 above but motor 20 HP Capacity | 2 | Each Job | |
| 124 | 124 | Supply only Gun metal impeller with key and distance bushes for 50 HP Cap motor/submersible pump. | 1 | Each | |
| 125 | 125 | Description all as per item No. 124.00 above but Pump shaft of stain less steel for 50 HP Capacity | 1 | Each | |
| 126 | 126 | Description all as per item No. 124.00 here-in before but Motor bush of gun metal upper & lower for 50 HP | 1 | Each | |
| 127 | 127 | Description all as per item No. 124.00 here-in before but Rotar bearing stainless steel sleeve upper & lower for 50 HP Cap | 1 | Each | |
| 128 | 128 | Description all as per item No. 124.00 here-in before but Coupling arrangement with key for motor pump 50 HP Cap | 1 | Each | |
| 129 | 129 | Description all as per item No. 124.00 here-in before but Sand guard for submersible pump set for 50 HP Cap | 1 | Each | |
| 130 | 130 | Description all as per item No. 124.00 here-in before but Thrust bearing assembly for submersible pump set motor cap 50 HP. | 1 | Each | |
| 131 | 131 | Description all as per item No. 124.00 here-in before but Lower, housing for submersible pump set for the capacity of 50 HP motor. | 1 | Each | |
| 132 | 132 | Description all as per item No. 124.00 here-in before but Neck ring for submersible pump set of 50 HP capacity motor. | 1 | Each | |
| 133 | 133 | Description all as per item No. 124.00 here-in before but Bowl bush of gun metal 50 HP Cap motor | 1 | Each | |
| 134 | 134 | Supply & fix in replacement PVC submersible copper cable flat of size 16 Sqmm 3 Core including tieing with column pipe with nylon rope. | 200 | RM | |
| 135 | 135 | Material and labour in replacement column pipe made out from 100mm bore GI tubing medium grade ISI marked of approx 3 meter length having both ends flanged including its rubber gasket, nut, bolts and washers complete all as specified and directed by Engr-in-Charge. | 33 | RM | |
| 136 | 136 | S&F cast iron sluice valve PN-1.6 with flanged ends 250 mm nominal bore ISI marked complete with stainless steel spindle and cast iron cap including rubber /fiber board gasket, nuts, washers etc including taking down old unserviceable sluice valve complete all as specified and as directed by Engineer-in-Charge. | 1 | Each | |
| 137 | 137 | S&F cast iron sluice valve PN-1.6 with flanged ends 200 mm nominal bore ISI marked complete with stainless steel spindle and cast iron cap including rubber /fiber board gasket, nuts, washers etc including taking down old unserviceable sluice valve complete all as specified and as directed by Engineer-in-Charge. | 1 | Each | |
| 138 | 138 | S&F cast iron sluice valve PN-1.6 with flanged ends 150 mm nominal bore ISI marked complete with stainless steel spindle and cast iron cap including rubber /fiber board gasket, nuts, washers etc including taking down old unserviceable sluice valve complete all as specified and as directed by Engineer-in-Charge. | 6 | Each | |
| 139 | 139 | S&F cast iron sluice valve PN-1.6 with flanged ends 100 mm nominal bore ISI marked complete with stainless steel spindle and cast iron cap including rubber /fiber board gasket, nuts, washers etc including taking down old unserviceable sluice valve complete all as specified and as directed by Engineer-in-Charge. | 4 | Each | |
| 140 | 140 | Supply and fixing cast iron Non return valve with foot valve (flanged) reflux 250mm nominal bore ISI marked conforming to IS-5312 including rubber/fiber board gasket , nuts, washers etc including taking down old unserviceable Non return valve (flanged) reflux complete all as specified and directed by Engr-in-Charge. | 1 | Each | |
| 141 | 141 | Supply and fixing cast iron Non return valve with foot valve (flanged) reflux 200mm nominal bore ISI marked conforming to IS-5312 including rubber/fiber board gasket , nuts, washers etc including taking down old unserviceable Non return valve (flanged) reflux complete all as specified and directed by Engr-in-Charge. | 2 | Each | |
| 142 | 142 | Supply and fixing cast iron Non return valve with foot valve (flanged) reflux 150mm nominal bore ISI marked conforming to IS-5312 including rubber/fiber board gasket , nuts, washers etc including taking down old unserviceable Non return valve (flanged) reflux complete all as specified and directed by Engr-in-Charge. | 6 | Each | |
| 143 | 143 | Supply and fixing cast iron Non return valve with foot valve (flanged) reflux 100mm nominal bore ISI marked conforming to IS-5312 including rubber/fiber board gasket , nuts, washers etc including taking down old unserviceable Non return valve (flanged) reflux complete all as specified and directed by Engr-in-Charge. | 5 | Each | |
| 144 | 144 | Checking and examining of existing chloronome plant (Full Vacuum Chlorinator type Make : Toshcon Jesco) installed at various water supply installations (05 Nos) under GE (U) Ambala Cantt regularly as and when required & rectify the defects immediately as and when noticed in plants. \nNote : Replacement of spare parts of same make and type shall be measured and paid separately. | 180 | Each days | |
| 145 | 145 | Supply & fix in replacement of inlet valve assembly consisting of 1 filter 4 O rings, 2 valve sheets, 2 balls, 1 joint washer & 1 screw all as directed by Engineer-in-charge.\n. | 2 | Each Job | |
| 146 | 146 | Supply & fix in replacement of maintenance kit for vacuum chlorinator without inlet valve consisting of main diaphram alongwith disc to O rings 1 screw complete specified and directed by Engineer-in-charge.\n | 2 | Each Job | |
| 147 | 147 | Supply & fix in replacement of maintenance kit for non return valve (back stop) consisting of 2 ‘O’ ring and 1 ball all as directed by Engineer-in-charge.\n | 2 | Each Job | |
| 148 | 148 | Supply & Fix in replacement of standard venturi system suitable for cylinder mounted chloronome plants with fixing arrangement PVC TEE for fixing in the pipe line complete all as directed by Engr-in-Charge.\n | 2 | Each Job | |
| 149 | 149 | Supply and fix in replacement including testing and installation of monoblock pump set of capacity 5 HP electric motor 3 phase 415 V and making all connection with chloronome plant and cylinder complete with suitable size of UPVC pipe 30RM and all accessories complete with DOL starter as specified and directed by Engr-in-Charge. | 1 | Each Set | |
| 150 | 150 | Supply and fix in replacement MCCB TPN 36KA breaking capacity 200Amp, 415 V adjustable type complete all as specified and directed. | 2 | Each | |
| 151 | 151 | Description all as per item No. 150.00 above but 160 Amp and ditto---- | 3 | Each | |
| 152 | 152 | Description all as per item No. 150.00 here in before but 250 Amp and ditto---- | 4 | Each | |
| 153 | 153 | Description all as per item No. 150.00 here in before but 125 Amp and ditto---- | 5 | Each | |
| 154 | 154 | Description all as per item No. 150.00 here in before but 100 Amp and ditto---- | 5 | Each | |
| 155 | 155 | Description all as per item No. 150.00 here in before but 125 Amp 3 Pole and ditto---- | 1 | Each | |
| 156 | 156 | Dismantling complete GI slotted Pipe from Alum Chambers and replacement of GI (slotted) Pipe of size 20mm - 75 RM, including angle iron (100 Kg), PVC pipe 50 RM, painting, welding of mixer and its existing angle iron, repairing of mixer and rewinding of motors(04 Nos) complete as specified and directed by Engr - in- Charge. | 1 | Each Job | |
| 157 | 157 | Supply and fix in replacement including testing and installation submersible dewatering pump single phase 2 HP, 230 V, 50 Hz suitable for 300 RPM at 12 Mtr head complete including 20 RM twin core copper 2.5 sqmm cable flat type all as specified and directed by Engr-in-Chagre. | 1 | Each set | |
| 158 | 158 | Supply and fix in replacement including testing and installation automatic star Delta starter, suitable for capacity 120HP/90KW, 3 phase covered with thick sheet metal cover including all fixing arrangements on wall with nuts, bolts electrical connection and testing etc including taking down complete all as specified and directed. | 1 | Each | |
| 159 | 159 | Description all as per item No 158.00 above but suitable for capacity 50HP/37.5KW | 1 | Each | |
| 160 | 160 | Description all as per item No 158.00 here in before but suitable for capacity 30HP/22.5KW | 1 | Each | |
| 161 | 161 | Description all as per item No 158.00 here in before but suitable for capacity 25HP/18.5KW | 2 | Each | |
| 162 | 162 | Material & labour in replacement indoor type LT control panel 3 phase 4 wire 415 V, 50 Hz of size 1.2 mtrx1.5 mtr 45 cm deep made out of CRCA sheet of size 2 mm thick. The panel has compartement type for fixing the accessoried and the panel has front openable . The panel will be IP 54 protection and lockable with chromium plated 19 mm dia fancy locks having lovers and air vent gasket for natural flow of air.The panel should have aluminium bus bar 1.5 times the rated capacity of incoming MCCB and colour coded on the bus bar and shrinkable sleeve on the bus bar to withstand high resistance. The panel have interconnection of main bus bar and outgoinh bus bar. The cubical shell have a bottom channel of size 75x40 mm duly coated with zinc metal. The panel shall be powder coated. The panel comprising space for installing two Nos star delta starter of suitablbe size for 25HP pumpset.\n | 1 | Each Job | |
| 163 | 162.01 | (i) Incoming MCCB 100 Amp 36 KA, TPN-01 No | |||
| 164 | 162.02 | (ii) Change over switch on load type 125 Amp 4 pole 415 Volts-01 No. | |||
| 165 | 162.03 | (iii) Outgoing MCCB 63 Amp 25 KA, 415 Volts, TPN-02 Nos | |||
| 166 | 162.04 | (iv) Digital voltmeter of size 96 sqmm suitable upto 500 volts-01 No. | |||
| 167 | 162.05 | (v) Digital Ammeter of size 96 sqmm suitable upto 200 Amp-01 No. | |||
| 168 | 162.06 | (vi) LED indicator lamp-01 Set. | |||
| 169 | 162.07 | (vii) Automatic star delta starter suitable for 25 HP pumpset: 01 Nos | |||
| 170 | 162.08 | Notes for item Sr No. 162.00 (i) The quoted rate shall include minor items such as lugs, nuts & bolts, washers, top insulators, sleeves, provision of extra holes in bus bar etc.\n(ii) All internal wiring shall be done with suitable size of PVC insulated solid copper conductor FRLS cable conforming to IS-694.\n(iii) Panel drawing shall be got approved before placing of order from Engr-in-Charge/GE.\n(iv) The bus connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip type duly insulated. \n(v) Cable will be entered in panles through gland. (vi) Cost of marking description and matter on the front door as specified and directed by Engr-in-Charge is incl in quoted rate. | |||
| 171 | 163 | Supply and fix in replacement Ductile iron pipe of size 250mm bore, flanged end, K-9, ISI marked including rubber gasket for flange joint, nut, bolts and washer etc complete all as specified and directed by Engineer-in-Charge. | 11 | RM | |
| 172 | 164 | Description all as per item No 163.00 above but for 200 mm dia | 11 | RM | |
| 173 | 165 | Description all as per item No 163.00 here-in before but for 150 mm dia | 44 | RM | |
| 174 | 166 | Note :- Amount of credit of Rs. 152255.00 for retrieved materials is mentioned in Schedule of Credit mentioned in tender documents in pdf form which will be deducted offline while acceptance of tender. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
