| 1 | 1 | Construction of Chawki Keetpalan Grih at Ajlapur, District Aurraiya (U.P.) | BI01010001010000000000000515BI0100001112 | | |
|---|
| 2 | 2 | CHAWKI KEETPALAN MAIN BUILDING\nExcavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. | BI01010001010000000000000515BI0100001113 | 73.85 | CUM |
|---|
| 3 | 3 | Filling of carted earth. | BI01010001010000000000000515BI0100001114 | 30.47 | CUM |
|---|
| 4 | 4 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. | BI01010001010000000000000515BI0100001115 | 26.74 | CUM |
|---|
| 5 | 5 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work. | BI01010001010000000000000515BI0100001116 | 21.05 | CUM |
|---|
| 6 | 6 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution) | BI01010001010000000000000515BI0100001117 | 141.61 | SQM |
|---|
| 7 | 7 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. | BI01010001010000000000000515BI0100001118 | 5.21 | CUM |
|---|
| 8 | 8 | As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete) | BI01010001010000000000000515BI0100001119 | 21.21 | CUM |
|---|
| 9 | 9 | As in item 1 but for the lighter beams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete) | BI01010001010000000000000515BI0100001120 | 8.07 | CUM |
|---|
| 10 | 10 | First class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001121 | 47.89 | CUM |
|---|
| 11 | 11 | M-150 brick work in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. | BI01010001010000000000000515BI0100001122 | 35.8 | CUM |
|---|
| 12 | 12 | Same as in item no. 10 but in 1:3 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. | BI01010001010000000000000515BI0100001123 | 4.15 | CUM |
|---|
| 13 | 13 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. | BI01010001010000000000000515BI0100001113 | 38.62 | QTL |
|---|
| 14 | 14 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand | BI01010001010000000000000515BI0100001114 | 212.78 | SQM |
|---|
| 15 | 15 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 fine sand. | BI01010001010000000000000515BI0100001115 | 231.47 | SQM |
|---|
| 16 | 16 | Making grooves 10 to 12 mm wide x am deep in plaster of the walls or in ceiling vertically or horizontally as required. | BI01010001010000000000000515BI0100001116 | 126.18 | RM |
|---|
| 17 | 17 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (40 mm thick with 20 mm nominal size stone aggregate) | BI01010001010000000000000515BI0100001117 | 146.68 | SQM |
|---|
| 18 | 18 | 20 mm thick cement plaster in dado/ skirting in 1:3 consisting of one part of cement and 2 parts of approved coarse sand laid in panels, finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001118 | 38.5 | SQM |
|---|
| 19 | 19 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (a) 35mm thick Single leaf | BI01010001010000000000000515BI0100001119 | 12.39 | SQM |
|---|
| 20 | 20 | M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work.\nProviding & fixing of hold fast for chaukhats of doors and windows. | BI01010001010000000000000515BI0100001120 | 33.6 | KG |
|---|
| 21 | 21 | Providing & fixing of door / windows grill. | BI01010001010000000000000515BI0100001121 | 204 | KG |
|---|
| 22 | 22 | Z-Section steel windows | BI01010001010000000000000515BI0100001122 | 255 | KG |
|---|
| 23 | 23 | Angle iron door chaukhats 40*40*5 | BI01010001010000000000000515BI0100001123 | 93.3 | KG |
|---|
| 24 | 24 | Fixing of Door Chaukhats | BI01010001010000000000000515BI0100001113 | 6 | NOS. |
|---|
| 25 | 25 | Fixing of Window Chaukhats | BI01010001010000000000000515BI0100001114 | 5 | NOS. |
|---|
| 26 | 26 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface) | BI01010001010000000000000515BI0100001115 | 212.78 | SQM |
|---|
| 27 | 27 | Finishing wall with water proof cement paint of approved quality such as super Snowcem, super quality of required shade on undecorated wall surface to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including curing & cost of all materials labour T&P etc complete. | BI01010001010000000000000515BI0100001116 | 231.47 | SQM |
|---|
| 28 | 28 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Ceiling) | BI01010001010000000000000515BI0100001117 | 152.32 | SQM |
|---|
| 29 | 29 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001118 | 365.1 | SQM |
|---|
| 30 | 30 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (a) 250mm x 16mm . | BI01010001010000000000000515BI0100001119 | 6 | NOS |
|---|
| 31 | 31 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250 mm x 10mm | BI01010001010000000000000515BI0100001120 | 6 | NOS |
|---|
| 32 | 32 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200 mm x 10mm | BI01010001010000000000000515BI0100001121 | 6 | NOS |
|---|
| 33 | 33 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (a) 125 mm | BI01010001010000000000000515BI0100001122 | 12 | NOS |
|---|
| 34 | 34 | Providing & laying \"brick Coba\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrylic cement concrete water proofing compound filled gaps of coba and top of coba mortar mixed with water proofing compound in 1:4 cement & C. sand mortar finished smooth & top mashed false square 30 cm x 30 cm & side wall parapet shall be mono lythic plaster wall upto 30cm higher & junction & corner shall be rounded by brick ballast cement and coarse sand masonry coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour T & P etc complete. | BI01010001010000000000000515BI0100001123 | 155.95 | SQM |
|---|
| 35 | 35 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001113 | 27.83 | SQM |
|---|
| 36 | 36 | Same as item above but on new wood surface. | BI01010001010000000000000515BI0100001114 | 24.78 | SQM |
|---|
| 37 | 37 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes | BI01010001010000000000000515BI0100001115 | 10.2 | SQM |
|---|
| 38 | 38 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 37 mm wide and 3.15 mm thick | BI01010001010000000000000515BI0100001116 | 660.06 | RM |
|---|
| 39 | 39 | Providing and fixing on wall face 110 mm dia unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. | BI01010001010000000000000515BI0100001117 | 16 | RM |
|---|
| 40 | 40 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (25 mm thick with 20 mm nominal size stone aggregate) | BI01010001010000000000000515BI0100001118 | 40.66 | SQM |
|---|
| 41 | 41 | Making of drain along apron (150 x 150mm) | BI01010001010000000000000515BI0100001119 | 54.2 | RM |
|---|
| 42 | 42 | ELECTRICAL INSTALLATIONS \nWiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in P.V.C. conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 sq mm FR P.V.C. insulated multistrand single core Copper Conductor cable as earth wire drawn inside & piano type switch and ceiling rose/angle/batten holder on 3 mm thick phinolic laminated backelite sheet etc complete in all respects as directed including matching colour wash. | BI01010001010000000000000515BI0100001120 | 22 | NOS |
|---|
| 43 | 43 | Same as in item no. 1 but for fan. and light duty exhaust fan | BI01010001010000000000000515BI0100001121 | 10 | NOS |
|---|
| 44 | 44 | Same as in item no. 1 but for 5 amp plug point with piano type switch & socket etc. | BI01010001010000000000000515BI0100001122 | 9 | NOS |
|---|
| 45 | 45 | Supply & fixing of power plug with 15 amp 250 volts flush type switch & 3 pin 15 amp 250 volts flush type socket in suitable M.S. box of 175 mm * 100mm * 50 mm size with bakelite sheet cover 3 mm thick fixed with brass machine screws & washer | BI01010001010000000000000515BI0100001123 | 3 | NOS |
|---|
| 46 | 46 | Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge. ( for A.C. ) | BI01010001010000000000000515BI0100001113 | 3 | Each |
|---|
| 47 | 47 | MAINS & SUBMAINS\nSupply & wiring of sub main with FR P.V.C. insulated 1100 volts grade single core copper conductor cable in heavy gauge P.V.C. coduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting comple. 2 x 4 sq. mm. With 1 x 2.5 sq.mm. Earth wire In 20 mm dia conduit. | BI01010001010000000000000515BI0100001114 | 40 | M |
|---|
| 48 | 48 | Supply & wiring of sub main with FR P.V.C. insulated 1100 volts grade single core copper conductor cable in heavy gauge P.V.C. coduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting comple. 2 x 10 sq. mm. With 1 x 6 sq.mm. Earth wire In 25 mm dia conduit. | BI01010001010000000000000515BI0100001115 | 20 | M |
|---|
| 49 | 49 | Supply & wiring of sub main with FR P.V.C. insulated 1100 volts grade single core copper conductor cable in heavy gauge P.V.C. coduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting comple. 2 x 16 sq. mm. With 1 x 10 sq.mm. Earth wire In 32 mm dia conduit. | BI01010001010000000000000515BI0100001116 | 10 | M |
|---|
| 50 | 50 | Supply and laying of heavy duty PVC conduit complete with bend and other accessories as required and 14 S.W.G. fish steel wire etc. in slab alongwith reinforcement before concreting and plastering complete in all respects. 20 mm dia. conduit | BI01010001010000000000000515BI0100001117 | 25 | M |
|---|
| 51 | 51 | Supply and laying of heavy duty PVC conduit complete with bend and other accessories as required and 14 S.W.G. fish steel wire etc. in slab alongwith reinforcement before concreting and plastering complete in all respects. 25 mm dia. conduit | BI01010001010000000000000515BI0100001118 | 20 | M |
|---|
| 52 | 52 | Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work 600x480x200 mm. size | BI01010001010000000000000515BI0100001119 | 1 | Nos |
|---|
| 53 | 53 | Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. 600x480x200 mm. size | BI01010001010000000000000515BI0100001120 | 1 | Nos |
|---|
| 54 | 54 | S/F of surface / flush mounting SPN Distribution board without MCB complete in all respects as directed at site by Engineer-in-charge. 4 ways TPN | BI01010001010000000000000515BI0100001121 | 1 | NOS |
|---|
| 55 | 55 | Supply & fixing of 6/10/16/20/25/32 amp. SP MCB (10 KA) | BI01010001010000000000000515BI0100001122 | 9 | NOS |
|---|
| 56 | 56 | Supply Fixing and making commection of 30 MA E.L.C.B. (Earth leakage circuit breaker) of din/R.C.C.B. rail mounting complete in all respects as per direction and satisfaction of engineer-in-charge. 63 Amp 2 Pole | BI01010001010000000000000515BI0100001123 | 1 | NOS |
|---|
| 57 | 57 | Supply & fixing of LED Tube Light with batten for up to 1x22 watt LED tube light fitting includingtube on Surface complete in all respect. 1x22 Watt. | BI01010001010000000000000515BI0100001113 | 2 | Nos. |
|---|
| 58 | 58 | Supply & fixing of LED Tube Light with batten for up to 1x22 watt LED tube light fitting includingtube on Surface complete in all respect. 2x22 Watt. | BI01010001010000000000000515BI0100001114 | 6 | Nos. |
|---|
| 59 | 59 | Supply and fixing of single light wall bracket on matching M.D.F.E.G. Board base etc. complete in all respects. Category AA | BI01010001010000000000000515BI0100001115 | 10 | Each |
|---|
| 60 | 60 | S/F of water light oblong 10 watt LED bulk head iuminaire with driver set confirming to IP 65 and above Protection. Comlete in all respect. Category AA | BI01010001010000000000000515BI0100001116 | 4 | NOS |
|---|
| 61 | 61 | Erection and testing of ceiling fan and regulator etc excluding supply of down rod, complete in all respect. | BI01010001010000000000000515BI0100001117 | 10 | NOS |
|---|
| 62 | 62 | S/F of hexagonal fan box with hexagonal side of approx. 80 mm.in length fabricated from 16 SWG M.S. sheet incorporating with 10 mm. dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement | BI01010001010000000000000515BI0100001118 | 10 | NOS |
|---|
| 63 | 63 | Supply and burying of 600mm x 600 mmx6mm Copper plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and one earthing leads of one No. 8 SWG copper.wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and Copper wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. | BI01010001010000000000000515BI0100001119 | 1 | Each |
|---|
| 64 | 64 | Supply & fixing of one number 8 SWG G.I. wire in 15mm dia G.I. Pipe of earthing, laid in ground or in wall duly conceale including the cost of cement, sand, labour, T&P other material required for proper completion of the work (S.I. No. 721) Same as PS 721 but with one number 8 SWG copper wire. | BI01010001010000000000000515BI0100001120 | 15 | Rm |
|---|
| 65 | 65 | S/F of door chime on Polished M.D.F.E.G. board including making connections etc. complete in all respects. | BI01010001010000000000000515BI0100001121 | 1 | NOS |
|---|
| 66 | 66 | S/F of danger board fabricated from 10 gauge M.S. sheet as per E/I rules. | BI01010001010000000000000515BI0100001122 | 1 | NOS |
|---|
| 67 | 67 | S/F of shock treatment chart ( prescribed under I.E.rules ) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T & P etc for proper completion of work. | BI01010001010000000000000515BI0100001123 | 1 | NOS |
|---|
| 68 | 68 | Supply and erection of factory fabricated and wired metal clad dust and vermin proof mounting panel TPN switch board complete with HRC tube heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respect. The instrument chamber shall be separate & shall complete of flush type ammeter, volt meter, selector switches for ammeter & volt meter, instrument fuses, current transformer etc. The switches board shall be fabricates with CRCA sheet with minimum thickness of 1.6/2mm.cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. Incoming 100 Amp T. P. N. -1 no. Outgoing 63Amp TPN - 2No. | BI01010001010000000000000515BI0100001113 | 1 | Nos. |
|---|
| 69 | 69 | Supply fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. | BI01010001010000000000000515BI0100001114 | 10 | Nos. |
|---|
| 70 | 70 | Supply and Ceiling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volt 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball breaing system | BI01010001010000000000000515BI0100001115 | 10 | Nos. |
|---|
| 71 | 71 | GST EXTRA AS PER APPLICABLE | BI01010001010000000000000515BI0100001129 | | |
|---|
