Carrying Out The Electrification Work Against Sanctioned Package No. 05, 06, 07, 08 & 09/Depo/Eudd-4/Alg./2021-22 Under Deposit Head In The Area Of Eudd-Iv, Aligarh

Sharing tender

Carrying Out The Electrification Work Against Sanctioned Package No. 05, 06, 07, 08 & 09 / Depo / Eudd-4 / Alg. / 2021-22 Under Deposit Head In The Area Of Eudd-Iv, Aligarh-1 Safe carriage of following S.T Poles/ PCC Poles from Store Centre, Sarsol to the respective site of work including the work of its loading & unloading at the repective ends. 2 11 Mtrs. long S.T.Pole 3 Safe carriage of line material viz. Conductor, G.I. Earth Wire, Cross Arm, Angle, Channel, Insulators, Clamps & other material from store Centre, Sarsol to the respective site of work including the work of its loading & unloading at the respective ends. 4 Erection of following single support including fixing complete HT/LT fittings as per RESSPO Munual including the cost of labour, T&P and carrier etc. required for proper completion of work. 5 11.0 Mtrs. long S.T. Pole 6 Grouting of single support as per RESSPO Manual including of the cost of labour, T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc. 7 11.0 Mtrs. long S.T. Pole 8 Erection & grouting of 11 Mtrs. ST double pole including fixing complete HT/LT fitting as per RESSPO Manual including the cost of labour, T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc. 9 Laying sagging stringing and binding of ACSR Weasel Conductor on the newly erected pole as per RESPO manual and as per direction of supervising engineer, including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work. 10 Erection and grouting of stay set including the work of nozzling etc. as per RESPO manual and also including the cost of arrangement of all grouting material, labour, T&P etc. required for proper completion of work as per RESSPO Manual. 11 Providing of MS Earthing Rod of 20x2500 mm and 6 SWG eaire wire etc. and Fixing & connecting of earthing rods as per RESSPO Manual including the cost of labour, T&P etc. required for proper completion of work. 12 Fixing of LT Distribution box including making connections of distribution box with LT mains by piercing clamps for Aerial Bunched Cable.The work will also include the opening of the service connection of the consumer and its connecting in distribution box. 13 Safe carriage of 25 KVA Distribution Transformer from Electricity Store Centre, Sarsol/Workshop, Jalapur or from any other place to the respective site of work including loading & unloading at the respective ends and mounting on double pole / placement on the Plinth including proper jumpering from 11 KV TPMO to the transformer and also connecting the LT site cables as per RESSPO Manual. 14 Neutral & body earthing of Distribution Transformer by digging of pit upto water level depth (approx. 125 feet) and then inserting 1-¼” dia GI pipe of ‘A’ grade, conforming to the requirement of IS specification and then connecting the top of the inserted pipe and transformer body through GI strip of size 40x6 mm with the help of nut and bolt or through gas welding, as per direction of supervising engineer. It includes the cost of all material labour, T&P, carrier etc. required for proper completion of work. The aforesaid work shall be carried out as per RESSPO norms. 15 Fabrication of T-Off Channel as per RESSPO Norms. 16 Fabrication of Top Channel as per RESSPO Norms. 17 Fabrication of Dropper Channel as per RESSPO Norms. 18 Fabrication of T/F Base Channel/Angle as per RESSPO Norms. 19 Providing & fixing of Danger Board with clamp as per RESSPO Norms 20 Safe carriage of 11kV XLPE HT Cable from Store Centre, Sarsol to the respective site of work including the work of its loading & unloading at the respective ends. 21 Laying of 11kV XLPE HT Cable including making proper connections with Transformer LT side and LT line. The work includes the cost of labour, T&P and carrier etc. required for proper completion of work. 22 Providing 3x70sq.mm. 11 KV Cable Jointing kit (O/D & I/D) and its Filling as per RESSPO Norms. 23 Laying of LT Cable including making proper connections with Transformer LT side. The work includes the cost of labour, T&P and carrier etc. required for proper completion of work.