Special Repair Work Of Non Residential Buildings At New Campus Civil Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Jun 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
236
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
EO MLSU Udaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair Work Of Non Residential Buildings At New Campus Civil Work
BOQ
| Name of Work: S/R work of Non Residential Buildings at New Campus | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolishing of R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 meter lead. | BI01010001010000000000000515BI0100001113 | 1 | Cum. |
| 2 | 2 | Demolishing cement concrete including disposal of material within 50 mtr. lead 1:4:8 or leaner mix | BI01010001010000000000000515BI0100001114 | 1 | Cum. |
| 3 | 3 | Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meter lead in cement mortar. | BI01010001010000000000000515BI0100001115 | 1 | Cum. |
| 4 | 4 | Dismantling stone rubble masonry including stacking of serviceable material and disposal of unserviceable material within 50 meter lead in cement mortar. | BI01010001010000000000000515BI0100001116 | 1 | Cum. |
| 5 | 5 | Dismantling door, windows and clearstory windows steel or wood shutter incl. Chowkhats and hold fast etc.complete and stacking within 50 mtr. lead of area below 3 Sqm. | BI01010001010000000000000515BI0100001117 | 1 | Nos. |
| 6 | 6 | ---do---- lead of area exceeding 3 sqm. | BI01010001010000000000000515BI0100001118 | 2 | Nos. |
| 7 | 7 | Dismantling steel work in single sections including dismembering and stacking within 50 mtr. lead in R.S. joists. | BI01010001010000000000000515BI0100001119 | 0.5 | Qtl. |
| 8 | 8 | Dismantling steel work in built-up sections without dismembering and stacking within 50 mtr. lead. | BI01010001010000000000000515BI0100001120 | 1 | Qtl. |
| 9 | 9 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead for thickness of tiles 10mm to 25mm. | BI01010001010000000000000515BI0100001121 | 15 | Sqm. |
| 10 | 10 | Dismantling stone slab/terrazzo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 mtr. Lead. | BI01010001010000000000000515BI0100001122 | 25 | Sqm. |
| 11 | 11 | Dismantling roofing including ridges, hips, valleys and rafters etc. and stacking the within 50 mtr. lead of G.I. sheet. | BI01010001010000000000000515BI0100001123 | 5 | Sqm. |
| 12 | 12 | Dismantling GI pipes (external work) including excavation and refilling trenches after taking out the pipes and including stacking of pies within 50 mtr. lead 15mm to 40mm nominal bore. | BI01010001010000000000000515BI0100001124 | 20 | Mtr. |
| 13 | 13 | ---do--- above 40mm nominal bore. | BI01010001010000000000000515BI0100001125 | 20 | Mtr. |
| 14 | 14 | Dismantling old plaster or skirting racking out joints and cleaning the surface for plaster incl.disposal of rubbish to the dumping ground within 50 mtr.lead. | BI01010001010000000000000515BI0100001126 | 40 | Sqm. |
| 15 | 15 | Dismantling roof with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr. Lead for stone slab roofing complete with lime dhar and kharanja. | BI01010001010000000000000515BI0100001127 | 2 | Sqm. |
| 16 | 16 | Dismantling of flooring with care including stacking of serviceable material and disposal of unserviceable material within 50 mtr. Lead for cement concrete flooring. | BI01010001010000000000000515BI0100001128 | 10 | Sqm. |
| 17 | 17 | Dismantling chhajja and shelves with care including making jhiries and making good Marble sheleves. | BI01010001010000000000000515BI0100001129 | 2 | Sqm. |
| 18 | 18 | Dismantling marble dado, sides of pillars etc. with care. | BI01010001010000000000000515BI0100001130 | 3 | Sqm. |
| 19 | 19 | Renewing glass panes, with putty and nails wherever necessary 4mm thick plain glass panes. | BI01010001010000000000000515BI0100001131 | 2 | Sqm. |
| 20 | 20 | ---do--- 5.5mm thick plain glass panes. | BI01010001010000000000000515BI0100001132 | 1 | Sqm. |
| 21 | 21 | Renewing glass panes, with wooden fillets wherever necessary 4mm thick plain glass panes. | BI01010001010000000000000515BI0100001133 | 1 | Sqm. |
| 22 | 22 | Renewing glass panes, with wooden fillets wherever necessary 5.5mm thick plain glass panes. | BI01010001010000000000000515BI0100001134 | 1 | Sqm. |
| 23 | 23 | Labour charges for removing and refixing aluminium partions/door including minor repair and alteration in the same. | BI01010001010000000000000515BI0100001135 | 5 | Sqm. |
| 24 | 24 | Repair to stone masonry in cement sand mortar 1:6 with old and new stone. | BI01010001010000000000000515BI0100001136 | 10 | Sqm. |
| 25 | 25 | Repair to cement plaster in cement mortar 1:6 (1 cement: 6 fine sand) incl. Removal of old plaster in regular shape and white or colour washing. | BI01010001010000000000000515BI0100001137 | 250 | Sqm. |
| 26 | 26 | Patch repair to cement concrete floor incld. digging out old floor in regular shape and removal of rubbish curing etc.Complete in all respect. | BI01010001010000000000000515BI0100001138 | 0.5 | Sqm. |
| 27 | 27 | Labour charges for repair to door/ window without using any material such as applying randha (finishing) tightening of bolts & screw etc. | BI01010001010000000000000515BI0100001139 | 5 | Sqm. |
| 28 | 28 | Repair of rolling shutter with replacement of shutter spring incl. removal of old spring in the existing rolling shutter incld. Cost of new spring. | BI01010001010000000000000515BI0100001140 | 3 | Each |
| 29 | 29 | Repair of rolling shutter with using any material such as bend repair, tightening of spring, bolt and screw etc. complete. | BI01010001010000000000000515BI0100001141 | 2 | Each |
| 30 | 30 | Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garage doors, compound wall gates etc. by welding drilling complete include Cost of welding rods and hire charge of welding machine and TP etc. complete. | BI01010001010000000000000515BI0100001142 | 2 | Sqm. |
| 31 | 31 | Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. Including taking out the excavated soil and depositing and refilling of Jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 Mtr. All kind of soils. | BI01010001010000000000000515BI0100001143 | 20 | Cum |
| 32 | 32 | --do—including stacking of useful material if available ordinary rock. | BI01010001010000000000000515BI0100001144 | 0.25 | Cum. |
| 33 | 33 | --do— Hard rock (blasting prohibited) useful material 30% | BI01010001010000000000000515BI0100001145 | 0.25 | Cum. |
| 34 | 34 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc in layers not exceeding 20 cm in depth, consolidating each deposited layers by ramming and watering including lead up to 50 mtr. and with all lift. | BI01010001010000000000000515BI0100001146 | 3 | Cum. |
| 35 | 35 | Cement sand mortar 1:6 (1 cement: 6 sand) | BI01010001010000000000000515BI0100001147 | 1 | Cum. |
| 36 | 36 | Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level using crusher broken aggregate M-15 grade Nominal mix (with graded stone aggregate 20mm nominal size) | BI01010001010000000000000515BI0100001148 | 5 | Cum. |
| 37 | 37 | ---do--- M-10 grade Nominal mix (with graded stone aggregate 20mm nominal size) | BI01010001010000000000000515BI0100001149 | 5 | Cum. |
| 38 | 38 | ---do--- 1:5:10 (1 cement: 5 coars sand: 10 graded stone aggregate 40mm nominal size) | BI01010001010000000000000515BI0100001150 | 15 | Cum. |
| 39 | 39 | Providing and laying cement concrete including curing compaction etc. complete in retaining walls, return, walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses string or lacing courses, parapets coping bed blocks anchor blocks plain windows sills, fillets etc. upto floor three level excluding the cost of centering, shuttering M 20 grade nominal mix ( with graded stone aggregate 20mm nominal size) | BI01010001010000000000000515BI0100001151 | 1 | Cum |
| 40 | 40 | ---do--- M 15 grade nominal mix (with graded stone aggregate 20mm nominal size) | BI01010001010000000000000515BI0100001152 | 1 | Cum |
| 41 | 41 | Brick Masonry in foundation and plinth with bricks of class designation 75 in C.M. 1:6 (1 Cement: 6 coarse sand) | BI01010001010000000000000515BI0100001153 | 2 | Cum |
| 42 | 42 | Add extra over item for brick work in super structure up to third storey. | BI01010001010000000000000515BI0100001154 | 2 | Cum |
| 43 | 43 | Add Extra for brick work in square or rectangular pillar upto 45 cm length and all sides are free. | BI01010001010000000000000515BI0100001155 | 1 | Cum |
| 44 | 44 | Half brick masonry in foundation up to third storey using bricks of class designation 75 in cement mortar 1:4 (1 cement: 4 sand) | BI01010001010000000000000515BI0100001156 | 10 | Sqm. |
| 45 | 45 | Add extra for half brick masonry in superstructure upto third storey including cost of nominal hoopreinforcement ( 2 Nos. 6mm dia M.S. bar at every forth course) | BI01010001010000000000000515BI0100001157 | 5 | Sqm. |
| 46 | 46 | Brick work in partition in superstructure up to third storey 7 cm thick (Brick on edges) using brick of class designation 75 in cement mortar 1:4 (1 Cement: 4 coarse sand) | BI01010001010000000000000515BI0100001158 | 1 | Sqm. |
| 47 | 47 | Random rubble stone masonry for foundation and plinth in cement sand mortar 1:6 for above 30 cm. thick walls. | BI01010001010000000000000515BI0100001159 | 5 | Cum. |
| 48 | 48 | Random rubble stone masonry for superstructure above plinth level one storey height in cement mortar 1:6 (1 cement: 6 sand) for above 30 cm. thick walls. | BI01010001010000000000000515BI0100001160 | 2 | Cum. |
| 49 | 49 | Add extra for R.R. stone masonry wall upto 30 cm and less thickness. | BI01010001010000000000000515BI0100001161 | 1 | Cum. |
| 50 | 50 | Pillar masonry including bed plates as per specifications upto 45 cm length and all sides are free. | BI01010001010000000000000515BI0100001162 | 1 | Cum. |
| 51 | 51 | S&F dressed sand or other approved stone shelves, tands in cement mortar 1:3 with fine dressed edges 50mm thick. | BI01010001010000000000000515BI0100001163 | 2 | Sqm. |
| 52 | 52 | Supplying and fixing in walls machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges Sand or other approved stone 50mm thick. | BI01010001010000000000000515BI0100001164 | 2 | Sqm. |
| 53 | 53 | ---do--- Kota stone 25 mm thick. | BI01010001010000000000000515BI0100001165 | 2 | Sqm. |
| 54 | 54 | Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 up to 15 cm thick. | BI01010001010000000000000515BI0100001166 | 0.5 | Cum. |
| 55 | 55 | P&F 30 to 40mm thick stone chajjas in cement sand mortar 1:4 including making gola at junction with wall in cement concrete M-15 grade (1:2:4 nominal mix) drip course 20mm thick plastering in CM 1:6 on both faces. | BI01010001010000000000000515BI0100001167 | 1 | Sqm. |
| 56 | 56 | P/F stone slabs table rubbed 16 to 18 mm thick in walls, steps, pillars counters, Jambs, shelves, sills etc laid on 12 mm (AV) thick base of cement mortar 1:3 ( 1 cement:3 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab complete including grinding rubbing and polishing complete Raj nagar 2nd quality with light spots and streaks above 3601 cm2 slabs. | BI01010001010000000000000515BI0100001168 | 2 | Sqm. |
| 57 | 57 | ---do--- Green Marble Kesriaji (Rishabdeo) upto above 3601 cm2 slabs. | BI01010001010000000000000515BI0100001169 | 5 | Sqm. |
| 58 | 58 | P/F Granite stone slabs thickness 16-18 mm mirror polished and machine cut in walls, steps, pillars counters, Jambs, shelves, sills etc laid on 12 mm (AV) thick base of cement mortar 1:3 ( 1 cement:3 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab complete including grinding rubbing and polishing complete South (REd/Choclate colour) above 3601 cm2 slabs. | BI01010001010000000000000515BI0100001170 | 5 | Sqm. |
| 59 | 59 | Green/ Black/Other granite above 3601 cm2 slabs. | BI01010001010000000000000515BI0100001171 | 5 | Sqm. |
| 60 | 60 | Extra for providing edge moulding to 16-18 mm thick marble stone counters, vantities etc. including machines polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge Marble work. | BI01010001010000000000000515BI0100001172 | 10 | Mtr. |
| 61 | 61 | ---do--- Granite work. | BI01010001010000000000000515BI0100001173 | 5 | Mtr. |
| 62 | 62 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanit counters and similar location in marble/stone work including necessary holes for pillars taps etc including rubbing and polishing of cut edge etc. complete. | BI01010001010000000000000515BI0100001174 | 1 | Nos. |
| 63 | 63 | Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, ralthal, stone kharanja, lime terracing 90mm average thickness (as per JAIPUR PRACTICE ) with ceiling pointing in cement sand mortar 1:3 complete as per specification for span above 2.50 mtr. And up to 3.0 mtr. for first floor. | BI01010001010000000000000515BI0100001175 | 5 | Sqm. |
| 64 | 64 | Providing gola (batta) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard designs. | BI01010001010000000000000515BI0100001176 | 30 | Sqm. |
| 65 | 65 | Providing brick kharnja in cement mortar 1:4 in square pattern over roof of ground floor 75 mm to 100 mm thick average. | BI01010001010000000000000515BI0100001177 | 2 | Sqm. |
| 66 | 66 | Providing stone slab covering over drains including filling of joints in cement sand mortar 1:3 with 35mm thick cement concrete flooring 1:2:4 mix complete with good finish with stone slab 60 to 75mmhick average. | BI01010001010000000000000515BI0100001178 | 0.75 | Sqm. |
| 67 | 67 | Providing brick kharnja in cement mortar 1:4 in square pattern over roof of ground floor 55 mm to 60 mm thick average. | BI01010001010000000000000515BI0100001179 | 1 | Sqm. |
| 68 | 68 | Encasing of R.S. joist with Khanda/ brick in cement mortar 1:4 with neat finishing | BI01010001010000000000000515BI0100001180 | 1 | Sqm. |
| 69 | 69 | Finishing with 25mm thick cement plaster on roofs in cement sand mortar 1.4 mix including water proofing compound @ 2% of cement used, with neat cement, finishing, curing etc. complete in all respect including making of 300mmx300mm square. | BI01010001010000000000000515BI0100001181 | 10 | Sqm. |
| 70 | 70 | Cement concrete flooring grade 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete 75mm thick with 20mm thick nominal size aggregate. | BI01010001010000000000000515BI0100001182 | 30 | Sqm. |
| 71 | 71 | ---do---50mm thick with 20mm thick nominal size aggregate. | BI01010001010000000000000515BI0100001183 | 20 | Sqm. |
| 72 | 72 | Add extra if finished with a floating coat of neat cement including cement slurry, making of lines of grooves etc. complete. | BI01010001010000000000000515BI0100001184 | 10 | Sqm. |
| 73 | 73 | Precast terrazo tiles of approved make 20mmthick with marble chips of size up to 6mm laid in floors, and landing, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete on 30mm thick bed of cement sand mortar 1:4 Dark shade using ordinary cement. | BI01010001010000000000000515BI0100001185 | 1 | Sqm. |
| 74 | 74 | Providing & Laying Chequerred plain cement concrete embossed to specially manufactured non slipping tiles of approved make 20mm thick laid on 20mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete. | BI01010001010000000000000515BI0100001186 | 50 | Sqm. |
| 75 | 75 | Add extra for chequered coloured plain cement concrete or specially manufactured non-slipping 9-12 mm ironite topping tiles of approved make 20mm thick. | BI01010001010000000000000515BI0100001187 | 50 | Sqm. |
| 76 | 76 | Polished blue Kota stone flooring skirting laid over 20mm thick base of C. M. 1:4 and jointed with gray cement slurry to match the shade of the slab including rubbing and polishing complete for area of each slab from 2001 to 5000 Sq.cm. 25 mm thick slab. | BI01010001010000000000000515BI0100001188 | 70 | Sqm. |
| 77 | 77 | Polished Blue Kota stone slab in steps, walls & pillars having fine machine cut edges laid on 12 mm (Av.) thick Cement Mortar. 1:3 & jointing with gray cement slurry mixed with pigment to match the shade of the slab, incl. rubbing & polishing complete 25mm thick slab area 2001 to 5000 Sq.Cm. | BI01010001010000000000000515BI0100001190 | 5 | Sqm. |
| 78 | 78 | 20 to 25mm thick polished stone flooring, over 20mm thick base of C.M. 1:4(1 cement:4 coarse sand) & jointing with gray cement slurry incl. rubbing complete in all respects. Nimbahera stone. | BI01010001010000000000000515BI0100001191 | 3 | Sqm. |
| 79 | 79 | 35mm thick Rough Chisel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement:6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects Nimbahera stone. | BI01010001010000000000000515BI0100001192 | 2 | Sqm. |
| 80 | 80 | Grinding and polishing on mosaic/polished stone flooring New Surface. | BI01010001010000000000000515BI0100001193 | 30 | Sqm. |
| 81 | 81 | ---do--- old surface. | BI01010001010000000000000515BI0100001194 | 10 | Sqm. |
| 82 | 82 | Add extra for mirror polishing on terazzo/ stone flooring New Surface. | BI01010001010000000000000515BI0100001195 | 5 | Sqm. |
| 83 | 83 | Add extra for mirror polishing on terazzo/ stone flooring old surface. | BI01010001010000000000000515BI0100001196 | 10 | Sqm. |
| 84 | 84 | Pointing with cement sand mortar 1:3 to stone flooring. | BI01010001010000000000000515BI0100001197 | 15 | Sqm. |
| 85 | 85 | Random rubble dry stone kharanja under floor. | BI01010001010000000000000515BI0100001198 | 1 | Cum. |
| 86 | 86 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finished 25 mm thick. | BI01010001010000000000000515BI0100001199 | 30 | Sqm. |
| 87 | 87 | --do-- 20 mm thick. | BI01010001010000000000000515BI0100001200 | 10 | Sqm. |
| 88 | 88 | --do-- 12 mm thick. | BI01010001010000000000000515BI0100001201 | 10 | Sqm. |
| 89 | 89 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finished 25 mm thick. | BI01010001010000000000000515BI0100001202 | 50 | Sqm. |
| 90 | 90 | -------do------- 20mm thick. | BI01010001010000000000000515BI0100001203 | 35 | Sqm. |
| 91 | 91 | Finishing with neat cement (punning). | BI01010001010000000000000515BI0100001204 | 30 | Sqm. |
| 92 | 92 | Add extra for plaster done over ceiling in C.M. 1:4 12mm thick. | BI01010001010000000000000515BI0100001205 | 10 | Sqm. |
| 93 | 93 | Making grooves as per design in plaster 10mm to 20mm wide. | BI01010001010000000000000515BI0100001206 | 10 | Mtr. |
| 94 | 94 | Making of Drip Course (Tapaka) in cement sand mortar 1:6 width upto 40mm and 10mm thick as per approved design. | BI01010001010000000000000515BI0100001207 | 10 | Mtr. |
| 95 | 95 | 6mm cement plaster to ceiling of mix 1:3 (1 cement:3 fine sand) | BI01010001010000000000000515BI0100001208 | 10 | Sqm. |
| 96 | 96 | Rough cast plaster with a mixture of sand and gravel or crushed stone 2.36mm to 12.5mm nominal size dashed over and including the fresh plaster in two layer, under layers of 12mm thick cement plaster and top layer 10mm thick of CM 1:4 ( 1 cement:4 sand) mixed with 10% fully grinded hydrated lime by volume of cement under layer of 12mm thick cement plaster done in cement sand mortar 1:4 (1 cement: 4 sand) ordinary cement finish using ordinary cement. | BI01010001010000000000000515BI0100001209 | 10 | Sqm. |
| 97 | 97 | Pointing on stone masonry in cement sand mortar 1:3 (1 cement:3 sand) raised and cut pointing. | BI01010001010000000000000515BI0100001210 | 10 | Sqm. |
| 98 | 98 | Pointing on stone slab ceiling with cement mortar 1:3 (1 cement: 3 sand) Flush pointing | BI01010001010000000000000515BI0100001211 | 20 | Sqm. |
| 99 | 99 | Cutting Jhiri above 75 mm x75 mm and below 150x150mm etc. and making good. | BI01010001010000000000000515BI0100001212 | 10 | Mtr. |
| 100 | 100 | Making holes in stone masonary wall upto 450mmx450mm size and making good in CM 1:6 | BI01010001010000000000000515BI0100001213 | 5 | Each |
| 101 | 101 | Add extra over item for fixing of door/window frames ( Chowkhats or steel windows) in the opening incl. Fixing hold fast in cement concrete 1:3:6 (1 cement:3 coarse sand:6 stone grit 20mm nominal grade) excluding the cost of frame of steel window. | BI01010001010000000000000515BI0100001214 | 8 | Sqm. |
| 102 | 102 | P/L damp proof course with cement concrete grade M-150 (1:2:4) mortar prepared with 1% solution of waterproof compound incl. Two coats of hot blown bitumen (2Kg/Sqm.) complete as per specification with glass strip 3mm thick at a distance of 1m interval 75mm thick. | BI01010001010000000000000515BI0100001215 | 10 | Sqm. |
| 103 | 103 | ---do--- 50mm thick. | BI01010001010000000000000515BI0100001216 | 1.5 | Sqm. |
| 104 | 104 | P/F Ist quality standard White, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles of ISI marked (IS:13753) of size 300mmx200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillar) | BI01010001010000000000000515BI0100001217 | 90 | Sqm. |
| 105 | 105 | Add extra for using coloured dark shade tiles instead of white/ivory/ light grey/light green/sky blue/ light brown and other light shade colour. | BI01010001010000000000000515BI0100001218 | 5 | Sqm. |
| 106 | 106 | Add extra for plaster in cement mortar 1:4 | BI01010001010000000000000515BI0100001219 | 40 | Sqm. |
| 107 | 107 | Add extra for using tiles of size 300x450mm. | BI01010001010000000000000515BI0100001220 | 20 | Sqm. |
| 108 | 108 | Add extra for using tiles of size 600x450mm. | BI01010001010000000000000515BI0100001221 | 10 | Sqm. |
| 109 | 109 | P&F 75mm widen decorative order in different shades and in all colours for glazed tiles. | BI01010001010000000000000515BI0100001222 | 45 | R.M. |
| 110 | 110 | P&F Motive pieces all colours for glazed tiles laid over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with pigment of matching shade complete. size 200x300mm | BI01010001010000000000000515BI0100001223 | 5 | Each |
| 111 | 111 | P/F Ist quality MAT finished ceramic tiles 300x300mm confirming to IS:13753 colour such as white, grey, ivory fume red brown, in walls, floors, steps, pillars etc. laid on a bed on neat cement slurry including nicely finished joints using waterproof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4) | BI01010001010000000000000515BI0100001224 | 50 | Sqm. |
| 112 | 112 | Add extra for using 400x400 size MAT finish tiles in place 300x300mm size | BI01010001010000000000000515BI0100001225 | 6 | Sqm. |
| 113 | 113 | Add extra for using coloured dark shade tiles instead of white/ivory/ light grey/light green/sky blue/ light brown and other light shade colours. | BI01010001010000000000000515BI0100001226 | 4 | Sqm. |
| 114 | 114 | P/F Ist quality Vitrified Porcelain Polished tiles on floor skirting and steps etc. in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS:15622 of approved make in all colour and shade, laid with 20mm thick C.M. 1:4 including grouting the joints white cement and matching pigment etc. complete size 600mmx600mm | BI01010001010000000000000515BI0100001227 | 60 | Sqm. |
| 115 | 115 | ---do--- size 900mmx900mm | BI01010001010000000000000515BI0100001228 | 5 | Sqm. |
| 116 | 116 | Add extra for Fixing glazed/ceramic/vitrified tiles with cement based high polymer modified quick set tile adhesive (water based) confirming to IS 15477, using 5 kg. adhesive per sqm of tile area, in average 3mm thickness complete. | BI01010001010000000000000515BI0100001229 | 30 | Sqm. |
| 117 | 117 | Excavation for road way in soil by mechanical means including cutting and pushing the earth to site of embankment upto distance of 100 mtr. Including trimming bottom and side slope in accordance with requirement of lines, grades and corss-sections. | BI01010001010000000000000515BI0100001230 | 50 | Cum. |
| 118 | 118 | Carriageof earth including loading, unloading etc. lead upto 5.0 Km. | BI01010001010000000000000515BI0100001231 | 50 | Cum. |
| 119 | 119 | Araish plaster (1 lime putty:2-jhingra) over lime plaster or plain back ground. | BI01010001010000000000000515BI0100001232 | 10 | Sqm. |
| 120 | 120 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade two or ore coats on new work including preparation of base with primer, putty, lippy complete in all respect. | BI01010001010000000000000515BI0100001233 | 100 | Sqm. |
| 121 | 121 | Painting with enamel paint of approved brand and manufacture to give an even shade two or more coats on new work. | BI01010001010000000000000515BI0100001234 | 50 | Sqm. |
| 122 | 122 | Providing corrugated G.I. sheet roofing fixed with G.I.J. or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers orf with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete ( up to a pitch of 60o) & excluding the cost of purlins rafters and trusses, for class of sheets 1.60 mm thick. | BI01010001010000000000000515BI0100001235 | 10 | Sqm. |
| 123 | 123 | Providing ridges or hips of width 600mm overall with plain GI sheet fixed with GI or J or L-hooks bolts and nuts 8mm dia GI limpet and bitumen washers complete 0.63mm thick. | BI01010001010000000000000515BI0100001236 | 1 | Mtr. |
| 124 | 124 | P&F Plain Fiber glass sheet (FRP sheet fiber Reinforcement product sheet confirming to IS:12866-1989) having minimum thickness as below including fixing with nuts, bolts, hooks and bitumen washer etc.complete 3.00mm thick (wt. 5.0 Kg./Mtr. Sq.) | BI01010001010000000000000515BI0100001237 | 20 | Sqm. |
| 125 | 125 | Add extra for corrugated fiber glass sheet as per asbestos cement profile/ steel profile for 3.00 mm thick. | BI01010001010000000000000515BI0100001238 | 20 | Sqm. |
| 126 | 126 | L/C for fixing of GI/AC sheet include, Cutting jhiri and repair, cutting of sheet, fixing of sheet with J or L hook and bitumen washer as per direction of Engineer Incharge. | BI01010001010000000000000515BI0100001239 | 3 | Sqm. |
| 127 | 127 | S & FCC 1:2:4 (M-15) Precast kerb on dand upto 60 cm length over 20mm thick base of cement mortar 1:6 including jointing, earthwork, painting and jointing with cement mortar 1:4 of size (20+25)/2 x40 cm | BI01010001010000000000000515BI0100001240 | 1 | Mtr. |
| 128 | 128 | Repair to damaged RCC slabs, beams and columns etc for strengtheing with cement mortar 1 : 3 in following steps\ni) Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried.\nii) Applying Epoxy primer on the exposed steel bars.\niii) Applying Epoxy hardener and resin mix (as per manufectured's specification) on concrete and steel bars with brush.\niv)Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day.\nv) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete.\nvi) Cure the plastered surface for 15 days | BI01010001010000000000000515BI0100001241 | 10 | Sqm. |
| 129 | 129 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 mtr and lift up to 1.5 mtr All kinds of soil | BI01010001010000000000000515BI0100001242 | 500 | Sqm. |
| 130 | 130 | Providing and injection chlopyrifous Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III 1971 as amended from time to time and creating a continuous chemical barrier under and around the column pits wall trenches basement excavation top surface of plinth filling junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (plinth floor area only shall be measured for payment) | BI01010001010000000000000515BI0100001243 | 50 | Sqm. |
| 131 | 131 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 ( 1 cement: 3 coarse sand) and making good the joints, excluding the cost of centering and shuttering and reinforcement M 20 grade nominal mix ( with 20mm nominal size) | BI01010001010000000000000515BI0100001244 | 1 | Cum |
| 132 | 132 | ---do--- M15 grade nominal mix (with 20mm nominal size) | BI01010001010000000000000515BI0100001245 | 0.25 | Cum |
| 133 | 133 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 ( 1 cement: 3 coarse sand) and making good the joints, excluding the cost of centering and shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade nominal mix (with graded stone agg. 20mm nominal size) | BI01010001010000000000000515BI0100001246 | 0.25 | Cum |
| 134 | 134 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 ( 1 cement: 3 coarse sand) and making good the joints, excluding the cost of centering and shuttering and reinforcement for Beams, suspended floors, roofs, girders having slopes upto 15o, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases M20 grade nominal mix ( with graded stone agg. 20mm nominal size) | BI01010001010000000000000515BI0100001247 | 0.25 | Cum |
| 135 | 135 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formworks for foundation in basements, rafts footings, straps beams, bases of columns etc. up to plinth level. | BI01010001010000000000000515BI0100001248 | 1 | Sqm. |
| 136 | 136 | Centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, copings, bed plates anchor blocks, sills, chajjas, lintel beam etc. | BI01010001010000000000000515BI0100001249 | 1 | Sqm. |
| 137 | 137 | ---do---- columns, pillars, posts and struts etc. | BI01010001010000000000000515BI0100001250 | 5 | Sqm. |
| 138 | 138 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending placing in position and binding (including cost of binding wire) all complete up to floor three level Thermo mechanically treated bars (confirming to relevant IS:1786) | BI01010001010000000000000515BI0100001251 | 10 | Kg. |
| 139 | 139 | 40mm thick marble chips flooring rubbed and polished to granolithic finish under layer 34mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) including fixing of dividing strips (excluding the cost of strips) and top layer 6mm thick with marble chips of approved colour and 1mm to 4mm nominal size laid in cement marble chips mix of 4:7 ( 4 cement : 7 marble chips) by volume including cement slurry etc. complete Light shade pigment with white cement. | BI01010001010000000000000515BI0100001252 | 1 | Sqm. |
| 140 | 140 | Marble chips skirting/dado rubbed and polished to granolithic finish 6mm thick with white marble chips and approved colour and size from smallest to 4mm nominal size laid in cement marble chips mix of 4:7 ( 4 cement : 7 marble chips) by volume including fixing of dividing strips (excluding the cost of strips)18mm thick with under layer of 12mm thick cement plaster 1:3 (1 cement: 3 coarse sand) Light shade pigment with white cement | BI01010001010000000000000515BI0100001253 | 1 | Sqm. |
| 141 | 141 | 25mm thick fine dressed and machine grinded surface stone flooring over 20mm (Av.) thick base in cement in CM 1:6 with joints finished flush with Red sand stone. | BI01010001010000000000000515BI0100001254 | 1 | Sqm |
| 142 | 142 | P&F Polyvinyl chloride sheet/ P.V.C. tile ( with backing of hesian cloth or other woven fabric flooring using rubber base adhesives including rolling with light wooden roller complete. 2.00mm thick sheet. | BI01010001010000000000000515BI0100001255 | 2 | Sqm |
| 143 | 143 | P&F cushion vinyl/fully flexible vinyl flooring confirming to IS 3462 flooring of approved make with fiber base using rubber base adhesives including rolling with light wooden roller complete. 2.00mm thick sheet. | BI01010001010000000000000515BI0100001256 | 1 | Sqm |
| 144 | 144 | P&F of preacast concrete interlocking blocks of M-30 grade 80mm thick manufactured from fully computerised automatic stationery hydraulic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete Job is to be executed as per instruction of Engineer-Incharge. The rates to be inclusive of all lead, lifts and taxes. General specification of blocks:1)Shape as defined by Engineer-Incharge.2)Tensile splitting strength and braking load as per BS 6717:20013)Colour Grey cement natural colour.4)Variation in dimension less than 1.6mm.5)Variation in thickness less than 3.2mm.6)Abrasion: As per BS 6717:2001 | BI01010001010000000000000515BI0100001257 | 10 | Sqm. |
| 145 | 145 | Add extra for Red colour | BI01010001010000000000000515BI0100001258 | 5 | Sqm. |
| 146 | 146 | Add extra for Yellow colour | BI01010001010000000000000515BI0100001259 | 5 | Sqm. |
| 147 | 147 | Add extra for plaster work for providing 12mm thick band upto 30cm wide in cement sand mortar 1:4 Moulded bend. | BI01010001010000000000000515BI0100001260 | 10 | Sqm. |
| 148 | 148 | Decorative plaster work with spectrum textured coating as per approved colour and shade complete as per manufacturing specification Roller finish | BI01010001010000000000000515BI0100001261 | 10 | Sqm. |
| 149 | 149 | ---do--- FLANKS TEXTURED – (Trowel Finish) av. thickness 800 to 1000 microns | BI01010001010000000000000515BI0100001262 | 1 | Sqm. |
| 150 | 150 | Making opening in masonry wall incl. dismantling fixing lintel/beam and making good the damages to wall and floor complete to match the existing surface incl. proping the existing structure above the opening excluding cost of lintel/beam etc. | BI01010001010000000000000515BI0100001263 | 5 | Sqm. |
| 151 | 151 | P&F 16mm M.S. fan clamps of standard shape and size in R.C.C. slab/stone slab roofing including cutting chase and making good and painting exposed portion of the clamps complete in existing roof. | BI01010001010000000000000515BI0100001264 | 5 | Each |
| 152 | 152 | Cutting Jhiri for fixing slab and making good. | BI01010001010000000000000515BI0100001265 | 10 | Mtr. |
| 153 | 153 | P&F 25mmx25mm angle iron upto 450mm long fixed in CM 1:3 including cutting holes in walls and ceiling making good the same complete as per design. | BI01010001010000000000000515BI0100001266 | 5 | Each |
| 154 | 154 | Structural steel work in single section fixed without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 mtr. height in R.S. Joist/flats, tees, angles and channels. | BI01010001010000000000000515BI0100001267 | 20 | Kg. |
| 155 | 155 | Structural steel work in single section fixed with connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 mtr. height in R.S. Joist/ flats, tees, angles and channels. | BI01010001010000000000000515BI0100001268 | 20 | Kg. |
| 156 | 156 | Structural steel work welded in built up sections, trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 mtr. height in R.S. joist/ flats, tees, angles and channels. | BI01010001010000000000000515BI0100001269 | 20 | Kg. |
| 157 | 157 | Steel work in built up tubular trusses including cutting cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete above plinth level up to 4.5 mtr. height. Hot finished welded type tubes. | BI01010001010000000000000515BI0100001270 | 20 | Kg. |
| 158 | 158 | P/F. T-Iron frames for doors, windows and ventilators of mild steel tee sections, joints mitered and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm, of 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. | BI01010001010000000000000515BI0100001271 | 20 | Kg. |
| 159 | 159 | S/F in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. | BI01010001010000000000000515BI0100001272 | 5 | Kg. |
| 160 | 160 | P&F cow catcher made of R.S. joist angles channels MS round including cutting welding and fabrication with priming coat of red oxide (as per design). | BI01010001010000000000000515BI0100001273 | 5 | Kg. |
| 161 | 161 | P/F steel gate, grating and grills made of angles, tees, square bars, flats or black pipe with holdfast and fittings complete as per design and drawing including cutting, welding and fabrication with priming coat of red oxide. | BI01010001010000000000000515BI0100001274 | 5 | Kg. |
| 162 | 162 | Add extra of square, rectangular hollow tubular sections are used. | BI01010001010000000000000515BI0100001275 | 5 | Kg. |
| 163 | 163 | Add extra if grills are made of flats only. | BI01010001010000000000000515BI0100001276 | 5 | Kg. |
| 164 | 164 | P/F in position collapsible steel shutter with vertical M.S. channels 20x10x2mm and bracket with flat iron diagonals 20x5mm size with top & bottom rail of T iron 40x40x6mm with 40mm dia steel pulleys/ bearing complete with bolts, nuts locking arrangement inside and outside stoppers, handles etc. as per specification including applying a coat of approved steel primer.(To be measured and paid as per outer dimension) with 75mm opening when closed. | BI01010001010000000000000515BI0100001277 | 1 | Sqm. |
| 165 | 165 | P&F 1mm thick M.S. sheet garrage door shutters with frame of 40x40x6mm angle iron 3mm M.S. gusset plates at the junction and corners including all fittings and applying a coat of approved steel primer (Excluding cost of frames.) using M.S. Angles 40x40x6mm for diagonal braces. | BI01010001010000000000000515BI0100001278 | 1 | Sqm. |
| 166 | 166 | S&F rolling shutters of approved make, made of 80x1.25 mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3 cm. long wire springs grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per design. (Clear openable area to be measured for payment.) | BI01010001010000000000000515BI0100001279 | 2 | Sqm. |
| 167 | 167 | Add extra for rolling shutter for providing mechanical device chain and crank operation for operating rolling shutters exceeding 10.00 Sqm. and upto 16.80 Sqm in the area. | BI01010001010000000000000515BI0100001280 | 1 | Sqm. |
| 168 | 168 | P/F M.S. sheet single leaf door shutter in angle iron frame 35x35x5mm suitability diagonally braced with 25x3 mm flat iron of above and below lock rail of size 50x5mm beading extra including all fittings as per direction Engg. Incharge but excluding cost of chowkhats including two coats of anticorrosive red oxide primer paint M.S. sheet 18 S.W.G. | BI01010001010000000000000515BI0100001281 | 1.5 | Sqm. |
| 169 | 169 | ---do—double leaf door shutter | BI01010001010000000000000515BI0100001282 | 2 | Sqm. |
| 170 | 170 | P/F steel glazed doors, windows and ventilators shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3 mm. 10cm long embedded in cement concrete block 15x10x10cm of 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs & screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with copper glazing clip and special metal sash putty of approved make or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fitting except necessary hings of pivots, steel handles, peg stay etc. as required windows side hung (open able) | BI01010001010000000000000515BI0100001283 | 0.5 | Sqm. |
| 171 | 171 | ---do--- for over all portion treated as fixed. | BI01010001010000000000000515BI0100001284 | 0.5 | Sqm. |
| 172 | 172 | -------do---- ventilators top hung. | BI01010001010000000000000515BI0100001285 | 0.5 | Sqm. |
| 173 | 173 | ---do--- Doors. | BI01010001010000000000000515BI0100001286 | 0.5 | Sqm. |
| 174 | 174 | Add extra for Providing brass handles/peg stays and fittings in place of oxidized fitting. | BI01010001010000000000000515BI0100001287 | 5 | Sqm. |
| 175 | 175 | Add extra for Aluminium handles/peg stays fitting instead of oxidized fitting. | BI01010001010000000000000515BI0100001288 | 5 | Sqm. |
| 176 | 176 | Add extra for 5mm thick plain glass instead of 4mm thick plain glass. | BI01010001010000000000000515BI0100001289 | 10 | Sqm. |
| 177 | 177 | S/F fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3 mm with suitable screw at not exceeding 150 mm distance. | BI01010001010000000000000515BI0100001290 | 3 | Sqm. |
| 178 | 178 | P/F square bars or other flat welded to window ventilators etc. | BI01010001010000000000000515BI0100001291 | 9 | Kg. |
| 179 | 179 | P&F welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, screws, clips etc. complete (excluding frame work ) of size welded mesh 25x25mm x 16 gauge. | BI01010001010000000000000515BI0100001292 | 0.9 | Sqm. |
| 180 | 180 | P&F angle iron frame 25x25x3mm for ventilators with fixed wire gauge 16 mesh 24 gauge incl. 100mm squar3e bars at interval of 100mm welded screwed to frame with metal beading 20x3m complete in all respect as per design. | BI01010001010000000000000515BI0100001293 | 5 | Sqm. |
| 181 | 181 | 180 cm high fencing with angle iron post 55x55x6mm placed at every 3 Mtr. Apart 45cm. in ground embedded in cement concrete 1:3:6 (30x30x60 cm) corner and every tenth post to be strutted with 55x55x6mm angle iron provide with 6 horizontal lines and two diagonal of black barbed wire between two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete. | BI01010001010000000000000515BI0100001294 | 5 | Sqm. |
| 182 | 182 | Add for using galvanized barbed wire instead of black barbed wire. | BI01010001010000000000000515BI0100001295 | 20 | P.mtr. Each wire Sqm. |
| 183 | 183 | S/F of chain link fencing with angle iron posts 50x50x6mm placed at every 3 mtr. apart 30 cm in ground embedded in cement concrete 1:3:6 ( 30x30x45 cm) corner and every tenth post to be strutted with (50x50x6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size 50mmx50mmx3.15mm | BI01010001010000000000000515BI0100001296 | 10 | Sqm. |
| 184 | 184 | Providing and fixing 1st Quality full boady anit skid heavy duty 10 mm thick tile on floor / porch laid on 20mm thick Cement Sand Mortar 1:4 including grouting, rejoints with white cement and matching pigment etc. complete size 300mm x 300 mm | BI01010001010000000000000515BI0100001297 | 5 | Sqm. |
| 185 | 185 | Supplying & fixing door, window chowkhats and other frames, including antitermite treatment, M.S. flat, holdfasts of size 250x40x3mm fixed with M.S. bolt 5mm dia 50mm long embedded in cement concrete M-15 grade. Sal wood grade –I | BI01010001010000000000000515BI0100001298 | 0.04 | Cum. |
| 186 | 186 | ---do--- M.P. Teak wood grade-1 | BI01010001010000000000000515BI0100001299 | 0.01 | Cum. |
| 187 | 187 | Supplying and fixing wood work in frames of wall panelling false ceiling partition wall etc. as per approved design and drawing including antitermite treatment. Ghana Teak wood grade-1 | BI01010001010000000000000515BI0100001300 | 0.01 | Cum. |
| 188 | 188 | P/F fully paneled Double leaf shutter for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure “A” and width of styles & top rails of 100mm and lock rails width of 150 mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12 mm size on both faces complete35 mm thick M.P. teak wood grade 1 ISI 12mm thick teak ply (both faces panels) | BI01010001010000000000000515BI0100001301 | 3.5 | Sqm. |
| 189 | 189 | ---do--- ISI 12mm thick Shuttering ply (both faces panels) | BI01010001010000000000000515BI0100001302 | 5 | Sqm. |
| 190 | 190 | ---do--- wire gauge 24 gauge 14 mesh of IS designation 85 gauge wires of dia 0.58mm panels. | BI01010001010000000000000515BI0100001303 | 2 | Sqm. |
| 191 | 191 | Add extra for providing other type of fittings:(as per sample approved by eingeer-incharge) Brass fittings. | BI01010001010000000000000515BI0100001304 | 2 | Sqm. |
| 192 | 192 | Extra for providing heavy sheet glass panes instead of ordinary glass in glazed doors, windows and clearstory window shutters (Area of opening for glass panes excluding portion inside rebate shall be measured) 5mm thick instead of 4mm thick. | BI01010001010000000000000515BI0100001305 | 2 | Sqm. |
| 193 | 193 | P/F fully paneled Double leaf shutter for window & ventilator as per approved design and drawings with approved steel fittings as per Annexure “A” and width of styles bottom & top rails 75mm including beading of size 25mm x 15 mm size on both faces 30 mm thick M.P. teak wood grade-I ISI 12mm thick teak ply (both faces panels) | BI01010001010000000000000515BI0100001306 | 2 | Sqm. |
| 194 | 194 | P&F Hydraulic door closure ISI Marked | BI01010001010000000000000515BI0100001307 | 1 | Each |
| 195 | 195 | P&F Motice lock of Superior make with brass handles. | BI01010001010000000000000515BI0100001308 | 1 | Each |
| 196 | 196 | P&F Almirah lock of approved make 70mm size | BI01010001010000000000000515BI0100001309 | 1 | Each |
| 197 | 197 | P&F lock in glass sheet. | BI01010001010000000000000515BI0100001310 | 1 | Sqm. |
| 198 | 198 | P&F external grade board solid core (triple core ) single leaf boiling water and termite resistance flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annex.’A’ 35mm thick Decorative teak veneer both side | BI01010001010000000000000515BI0100001311 | 1 | Sqm. |
| 199 | 199 | Add extra in flush doors for external teak wood lipping on flush door 40mmx6mm. | BI01010001010000000000000515BI0100001312 | 2 | R.M. |
| 200 | 200 | Providing and fixing 12mm thick palmets with 20mm dia C.P. steel curtain rod and brackets 100x25x3 mm M.S. flat etc. complete Ghana wood 150mm wide | BI01010001010000000000000515BI0100001313 | 2 | R.M. |
| 201 | 201 | Providing and fixing 12mm thick palmets of different width of flat pressed 3 layer or graded wood particle board medium density grade 1, IS: 3087 marked with 20mm dia C.P. Steel curtain rod and brackets 100x25x3mm MS flat etc. complete Particle or fibre board (phenol bonded) 150mm wide. | BI01010001010000000000000515BI0100001314 | 2 | Mtr. |
| 202 | 202 | P&F 20mm dia conduit pipe curtain rods with steel brackets complete. | BI01010001010000000000000515BI0100001315 | 5 | Mtr. |
| 203 | 203 | P&F Nigeria/Ghana Teak wood grade-1 mouldings and beading in doors and windows size 50x12mm | BI01010001010000000000000515BI0100001316 | 10 | Mtr. |
| 204 | 204 | ---do--- size 50x20mm | BI01010001010000000000000515BI0100001317 | 1 | Mtr. |
| 205 | 205 | ---do--- size 25x12mm | BI01010001010000000000000515BI0100001318 | 1 | Mtr. |
| 206 | 206 | ---do--- size 20x12mm | BI01010001010000000000000515BI0100001319 | 1 | Mtr. |
| 207 | 207 | Groove cutting in glasses handles and fixing other accessories complete with care. | BI01010001010000000000000515BI0100001320 | 1 | Each |
| 208 | 208 | Providing and fixing wooden stoppers with lugs of teak wood. | BI01010001010000000000000515BI0100001321 | 1 | Each |
| 209 | 209 | Providing brackets fixed in 7.5x7.5x15 cm blocks of cement concrete 1:3:6 (1 cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size) to support 20mm wide shelves. T or L 30cm long of section 40x40x4mm each. | BI01010001010000000000000515BI0100001322 | 10 | Each |
| 210 | 210 | Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) and making good the wall etc. | BI01010001010000000000000515BI0100001323 | 10 | Each |
| 211 | 211 | Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holed in masonry work/CC/RCC and making good etc. complete 50mm long. | BI01010001010000000000000515BI0100001324 | 5 | Each |
| 212 | 212 | Labour charges for removing and refixing aluminium partitions/door including minor repair and alteration in the same. | BI01010001010000000000000515BI0100001325 | 2 | Sqm. |
| 213 | 213 | Repair of door, window shutters including cost of material and labour for change of damaged: | BI01010001010000000000000515BI0100001326 | 1 | Sqm. |
| 214 | 214 | Style/rail of teak wood30mm thick/ Aluminium section | BI01010001010000000000000515BI0100001327 | 1 | Sqm. |
| 215 | 215 | 4” wide | BI01010001010000000000000515BI0100001328 | 1 | Mtr. |
| 216 | 216 | 6” wide | BI01010001010000000000000515BI0100001329 | 1 | Mtr. |
| 217 | 217 | Panel by | BI01010001010000000000000515BI0100001330 | 1 | Mtr. |
| 218 | 218 | Shuttering ply = 9mm thick (Commercial) | BI01010001010000000000000515BI0100001331 | 1 | Sqm. |
| 219 | 219 | Wire gauge 14 mesh x 24 gauge | BI01010001010000000000000515BI0100001332 | 1 | Sqm. |
| 220 | 220 | Plain Glass Panes 4mm thick | BI01010001010000000000000515BI0100001333 | 1 | Sqm. |
| 221 | 221 | Aldrop of mild steel | BI01010001010000000000000515BI0100001334 | 1 | Sqm. |
| 222 | 222 | 12” long x 12 mm dia. | BI01010001010000000000000515BI0100001335 | 1 | Each |
| 223 | 223 | 8” long x 10 mm dia. | BI01010001010000000000000515BI0100001336 | 1 | Each |
| 224 | 224 | Stopper of Aluminium with | BI01010001010000000000000515BI0100001337 | 1 | Each |
| 225 | 225 | Single Rubber Gutka | BI01010001010000000000000515BI0100001338 | 1 | Each |
| 226 | 226 | Double Rubber Gutka | BI01010001010000000000000515BI0100001339 | 1 | Each |
| 227 | 227 | Door Springs of mild steel | BI01010001010000000000000515BI0100001340 | 1 | Each |
| 228 | 228 | Steel Hinges | BI01010001010000000000000515BI0100001341 | 1 | Each |
| 229 | 229 | For Wooden Chowkhat 3” Size | BI01010001010000000000000515BI0100001342 | 1 | Each |
| 230 | 230 | For Wooden Chowkhat 4” Size | BI01010001010000000000000515BI0100001343 | 1 | Each |
| 231 | 231 | Mild Steel Tower Bolt 6” long | BI01010001010000000000000515BI0100001344 | 1 | Each |
| 232 | 232 | Steel Locking Bolt | BI01010001010000000000000515BI0100001345 | 1 | Each |
| 233 | 233 | Steel Handle 6” size | BI01010001010000000000000515BI0100001346 | 1 | Each |
| 234 | 234 | S/F fixed wire gauge o9f stainless steel of 14 Mesh x 24 gauge to the aluminium window by aluminium beading 20x3mm with sutiableScrews at not exceeding 150 mm distance at all height with all lead and lift with scaffolding. | BI01010001010000000000000515BI0100001347 | 2 | Sqm |
| 235 | 235 | Providing and injection chlopyrifous Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III 1971 as amended from time to time and creating a continuous chemical barrier under and around the column pits wall trenches basement excavation top surface of plinth filling junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (plinth floor area only shall be measured for payment) | BI01010001010000000000000515BI0100001348 | 50 | Sqm |
| 236 | 236 | Providing and injecting by hand operated pressure pumps chemical Emulsion timber ground treatment (TCGT)in ration 1:2 as per manufacturers specifications for POST CONSTRUCTIONAL Anti termite treatment (as per IS 6313) part-III 1971 as amended from time to time.Along external wall where apron is not provided using\nChemical emulsion @ 7.5 litre/sqm of the vertical surface\nof the sub structure to a depth of 300 mm including\nexcavation of channel along the wall & rodding etc.\ncomplete with chloropyrfos/Lindane EC 20% with 1%\nconcentration. | BI01010001010000000000000515BI0100001349 | 50 | Mtr. |
| 237 | 237 | Providing and laying water proofing treatment in sunken portion of\nWCs bathroom etc. by applying polymer modified cementous\nslurry consisting of appearing. (I) First layer of slurry of ement @ 0.448 kg/sqm mixed with polymer\n@ 0.253 kg/sqm This layer will be allowed to air cure for 4 hours. (II) Second layer of slurry of cement @ .242 kg/sqm mixed with\npolymer @ 0.126 kg/sqm This layer will be be allowed to air cure\nfor 4 hours followed by water curing for 48 hours.\nThe rates includes preparation of surface treatment & sealing of\nall joints corners, junction with polymer mixed slurry. | BI01010001010000000000000515BI0100001350 | 50 | Sqm |
AI Tender Summary
Tender Timeline
Jun 19, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 25, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 28, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender