| 1 | 1 | REPAIRS TO TABLE DINING (ORS), FD – 165 M :- | | | |
|---|
| 2 | 1.01 | Material and labour in replacement for top of table dining (OR’s) with 18/19mm thick block board exterior grade duly covered with 1mm thick aluminium sheet all around the top upto 25mm to bottom and to be fixed with 25mm/40mm steel screw to the existing frame including providing PVC shoe of required size to each leg as required complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 15 | Each |
|---|
| 3 | 1.02 | Material and labour in replacement for leg of table with 25 mm square tube of wall thickness 1.6 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 15 | Each |
|---|
| 4 | 1.03 | Material and labour in replacement for centre stiffener and long rail with 25 mm square table of wall thickness 1.60 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 12 | Each |
|---|
| 5 | 1.04 | Material and labour in replacement for short stiffener and short rail of table with 25 mm square table of wall thickness 1.60 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 14 | Each |
|---|
| 6 | 1.05 | Material and labour in replacement for hard rubber shoe of table of black colour as per existing as approved complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 60 | Each |
|---|
| 7 | 1.06 | Material and labour for preparation of old / new painted steel surfaces (external and internal) from Table dining and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 15 | Each |
|---|
| 8 | 2 | REPAIRS TO TABLE 3' X 3' STEEL, FD-1009 :- | | | |
|---|
| 9 | 2.01 | Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 20 | Each |
|---|
| 10 | 2.02 | Material and labour in replacement for leg of table with 25 mm square tube of wall thickness 1.6 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 18 | Each |
|---|
| 11 | 2.03 | Material and labour in replacement for stiffner/ rail of table with 25 mm square tube of wall thickness 1.6 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 20 | Each |
|---|
| 12 | 2.04 | Material and labour in replacement for hard rubber shoe of table of black colour as per existing as approved complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 80 | Each |
|---|
| 13 | 2.05 | Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 20 | Each |
|---|
| 14 | 3 | REPAIRS TO TABLE 3' X 2' WITH / WITHOUT DRAWER STEEL, FD-1007 & FD-1008 :- | | | |
|---|
| 15 | 3.01 | Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 80 | Each |
|---|
| 16 | 3.02 | Material and labour in replacement for leg of table with 25 mm square tube of wall thickness 1.6 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 80 | Each |
|---|
| 17 | 3.03 | Material and labour in replacement for centre stiffener and long rail of table with 25 mm square table of all thickness 1.60 mmincluding necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 75 | Each |
|---|
| 18 | 3.04 | Material and labour in replacement for short stiffener and short rail of table with 25 mm square table of all thickness 1.60 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 70 | Each |
|---|
| 19 | 3.05 | Material and labour in replacement for drawer of table made of 1 mm thick MS black sheet including making shape, welded with gas welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 25 | Each |
|---|
| 20 | 3.06 | Material and labour in replacement for hard rubber shoe of table of black colour as per existing as approved complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 320 | Each |
|---|
| 21 | 3.07 | Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 80 | Each |
|---|
| 22 | 4 | REPAIRS TO TEAPOY VERANDAH, FD-35 :- | | | |
|---|
| 23 | 4.01 | Material and labour in replacement for top of teapoy verandah with 18/19 mm thick Particle board (exterior grade) ISI marked both side commercial including 1mm thick laminated sheet of white colour ( Shade and texture natural teak) fixed with synthetic rubber adhessive of make Fevicol or Pidilite or equivalent conforming to IS-4835 and 4 mm thick half round teak wood edging all round the top complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 24 | 4.02 | Material and labour in replacement for centre stiffener with 19/20 mm conduit pipe of wall thickness 1.60 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 30 | Each |
|---|
| 25 | 4.03 | Material and labour in replacement for side stiffener with with 19/20 mm conduit pipe of wall thickness 1.60 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 26 | 4.04 | Material and labour in replacement for leg of table with with 19/20 mm conduit pipe of wall thickness 1.6 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 30 | Each |
|---|
| 27 | 4.05 | Material and labour in replacement for hard rubber shoe of black colour as per existing as approved complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 160 | Each |
|---|
| 28 | 4.06 | Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 29 | 5 | REPAIRS TO TABLE OFFICE CLERK STEEL, FD-1004 :- | | | |
|---|
| 30 | 5.01 | Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 140 | Each |
|---|
| 31 | 5.02 | Material and labour in replacement for drawer of table made of 1 mm thick MS black sheet including making shape, welded with gas welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 80 | Each |
|---|
| 32 | 5.03 | Material and labour in replacement for box with drawer of table made of 1 mm thick MS black sheet including making shape, welded with gas welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 50 | Each |
|---|
| 33 | 5.04 | Material and labour in replacement for leg / rail / stiffner of table with 25 mm square tube of wall thickness 1.6 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 140 | Each |
|---|
| 34 | 5.05 | Material and labour in replacement for lock of drawer 6 Lever 65 mm of approved quality with duplicate key complete all as specified and shown in drawing and directed by the Engineer-in-Charge | | 100 | Each |
|---|
| 35 | 5.06 | Material and labour in replacement for hard rubber shoe of black colour as per existing as approved complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 560 | Each |
|---|
| 36 | 5.07 | Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 140 | Each |
|---|
| 37 | 6 | REPAIRS TO TABLE OFFICE OFFICER STEEL – FD-1002 / 1003 :- | | | |
|---|
| 38 | 6.01 | Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 40 | Each |
|---|
| 39 | 6.02 | Material and labour in replacement for drawer of table made of 1 mm thick MS black sheet including making shape, welded with gas welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 30 | Each |
|---|
| 40 | 6.03 | Material and labour in replacement for box of table made of 1 mm thick MS black sheet including making shape, welded with gas welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 25 | Each |
|---|
| 41 | 6.04 | Material and labour in replacement for shutter of box of table made of 1 mm thick MS black sheet including necessary cuttings, making to shape, welded with gas welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 20 | Each |
|---|
| 42 | 6.05 | Material and labour in replacement for leg / rail / stiffner of table with 25 mm square tube of wall thickness 1.6 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 43 | 6.06 | Material and labour in replacement for lock of drawer 6 Lever 65 mm of approved quality with duplicate key complete all as specified and shown in drawing and directed by the Engineer-in-Charge | | 30 | Each |
|---|
| 44 | 6.07 | Material and labour in replacement for hard rubber shoe of black colour as per existing as approved complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 160 | Each |
|---|
| 45 | 6.08 | Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 46 | 7 | REPAIRS TO CHAIR CB STEEL WITH ARM AND WITHOUT ARMS, FD-75 (M) :- | | | |
|---|
| 47 | 7.01 | Material and labour in replacement for seat of chair CB steel with arms duly painted with two coats of synthetic enameled paint of black colour including weaving with 2mm wide 0.4 mm thick white plastic cane (Make : Ajay/premium/shah) as per Godrej pattern and fixed to chair frame with 04 Nos machine screw with washers of size 75mm x 3mm complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 350 | Each |
|---|
| 48 | 7.02 | Material and labour in replacement for Back of chair CB steel with arms duly painted with two coats of synthetic enameled paint of black colour including weaving with 2mm wide 0.4 mm thick white plastic cane (Make : Ajay/premium/shah) as per Godrej pattern with and fixed with chair frame with 04 Nos machine screw with washers of size 75mmx 3mm complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 350 | Each |
|---|
| 49 | 7.03 | Material and labour in replacement for seat of chair CB steel without arms duly painted with two coats of synthetic enameled paint of black colour including weaving with 2mm wide 0.4 mm thick white plastic cane (Make : Ajay/premium/shah) as per Godrej pattern and fixed to chair frame with 04 Nos machine screw with washers of size 75mm x 3mm complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 50 | Each |
|---|
| 50 | 7.04 | Material and labour in replacement for Back of chair CB steel without arms duly painted with two coats of synthetic enameled paint of black colour including weaving with 2mm wide 0.4 mm thick white plastic cane (Make : Ajay/premium/shah) as per Godrej pattern with and fixed with chair frame with 04 Nos machine screw with washers of size 75mmx 3mm complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 50 | Each |
|---|
| 51 | 7.05 | Material and labour in replacement for flat Iron stiffener of chair CB with arms of size 25mm x 3mm, 420mm long fixed to frame including necessary cuttings, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 1400 | Each |
|---|
| 52 | 7.06 | Material and labour in replacement for flat Iron stiffener of chair CB without arms of size 25mm x 3mm, 380mm long fixed to frame including necessary cuttings, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 200 | Each |
|---|
| 53 | 7.07 | Material and labour in replacement for PVC cap of best quality for 20 mm dia conduit frame of chair CB steel complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 800 | Each |
|---|
| 54 | 7.08 | Material and labour in replacement for arm of chair CB steel including painted with two coats of synthetic enameled paint of black colour over a coat of red oxide primer complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 600 | Each |
|---|
| 55 | 7.09 | Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 400 | Each |
|---|
| 56 | 8 | REPAIRS TO ALMIRAH LARGE STEEL (ALL TYPES), FD-67M, 1031 &1033 :- | | | |
|---|
| 57 | 8.01 | Material and labour in replacement for lock of almirah large steel of Make : Harison, Godrej of suitable size with duplicate keys as per sample, fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 300 | Each |
|---|
| 58 | 8.02 | Material and labour in replacement for locking device with cover of almirah steel large including lock bar complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 240 | Each |
|---|
| 59 | 8.03 | Material and labour for repair to door shutter with denting and necessary adjustment as required complete all as specified and directed by the Engineer-in-Charge.. | | 100 | Each |
|---|
| 60 | 8.04 | Material and labour in replacement for door shutter of almirah large steel made of 1 mm thick mild steel black sheet complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 200 | Each |
|---|
| 61 | 8.05 | Material and labour in replacement for handle of almirah large steel chromium plated fixed with screws, complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 300 | Each |
|---|
| 62 | 8.06 | Material and labour in replacement for leg of almirah large steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 400 | Each |
|---|
| 63 | 8.07 | Material and labour in replacement for hinge of almirah large steel,mild steel, 100mm size of approved quality fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 600 | Each |
|---|
| 64 | 8.08 | Material and labour in replacement for shelf of almirah large steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 300 | Each |
|---|
| 65 | 8.09 | Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 300 | Each |
|---|
| 66 | 9 | REPAIRS TO ALMIRAH MEDIUM STEEL WITH SHELVE, FD-67M & FD-1032 :- | | | |
|---|
| 67 | 9.01 | Material and labour in replacement for lock of almirah medium steel of Make : Harison, Godrej of suitable size with duplicate keys as per sample, fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 400 | Each |
|---|
| 68 | 9.02 | Material and labour in replacement for locking device with cover of almirah steel medium including lock bar complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 300 | Each |
|---|
| 69 | 9.03 | Material and labour for repair to door shutter with denting and necessary adjustment as required complete all as specified and directed by the Engineer-in-Charge. | | 200 | Each |
|---|
| 70 | 9.04 | Material and labour in replacement for door shutter of almirah medium steel made of 1 mm thick mild steel black sheet complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 200 | Each |
|---|
| 71 | 9.05 | Material and labour in replacement for handle of almirah medium steel chromium plated fixed with screws, complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 400 | Each |
|---|
| 72 | 9.06 | Material and labour in replacement for leg of almirah medium steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 400 | Each |
|---|
| 73 | 9.07 | Material and labour in replacement for hinge of almirah medium steel,mild steel, 75mm size of approved quality fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 600 | Each |
|---|
| 74 | 9.08 | Material and labour in replacement for shelf of almirah medium steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 500 | Each |
|---|
| 75 | 9.09 | Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 400 | Each |
|---|
| 76 | 10 | REPAIRS TO LOCKER STEEL, FD-1029 :- | | | |
|---|
| 77 | 10.01 | Material and labour in replacement for leg of locker steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 400 | Each |
|---|
| 78 | 10.02 | Material and labour in replacement for hasp and staple chromium plated safety type 100mm long of approved quality complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 200 | Each |
|---|
| 79 | 10.03 | Material and labour in replacement for handle of locker steel chromium plated of size 100mm fixed with screws, complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 400 | Each |
|---|
| 80 | 10.04 | Material and labour in replacement for hinge of locker steel, mild steel, 75mm size of approved quality fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 400 | Each |
|---|
| 81 | 10.05 | M & L for repairing of door shutters by denting and necessary adjustment as required all as directed by Engr-in-Charge. | | 200 | Each |
|---|
| 82 | 10.06 | Material and labour in replacement for top / bottom of locker steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 250 | Each |
|---|
| 83 | 10.07 | Material and labour in replacement for door shutter of locker steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 200 | Each |
|---|
| 84 | 10.08 | Material and labour for denting to old chipped surfaces and preparing the ground externally/ internally with ready made putty complete all as specified and directed by the Engineer-in-Charge. | | 200 | Each |
|---|
| 85 | 10.09 | Material and labour in replacement for chromium plated hanging rod of locker steel of shape & size complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 200 | Each |
|---|
| 86 | 10.1 | Material and labour for welding to broken places of locker / almirah / table / chair etc including preparation of surfaces complete all specified and directed by the Engineer-in-Charge. | | 400 | Each |
|---|
| 87 | 10.11 | Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 200 | Each |
|---|
| 88 | 11 | REPAIRS TO RACK STEEL OF SIZE 1905MM X915MMX760MM :- | | | |
|---|
| 89 | 11.01 | Material and labour in replacement for angle iron of size 40mm x40mm x 4 mm thick, including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 90 | 11.02 | Material and labour in replacement for shelf of rack steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 35 | Each |
|---|
| 91 | 11.03 | Material and labour in replacement for back cover of rack steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 25 | Each |
|---|
| 92 | 11.04 | Material and labour in replacement for side cover of rack steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 93 | 11.05 | Material and labour for denting to old chipped surfaces and preparing the ground externally/ internally with ready made putty complete all as specified and directed by the Engineer-in-Charge. | | 30 | Each |
|---|
| 94 | 11.06 | Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 35 | Each |
|---|
| 95 | 12 | REPAIRS TO BOOK SHELVES OPEN LARGE STEEL, FD-69 | | | |
|---|
| 96 | 12.01 | Material and labour in replacement for angle iron of size 40mm x 40mm x 4 mm thick, including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 97 | 12.02 | Material and labour in replacement for shelf of book shelves steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 30 | Each |
|---|
| 98 | 12.03 | Material and labour in replacement for back cover of book shelves steel steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 25 | Each |
|---|
| 99 | 12.04 | Material and labour in replacement for side cover of book shelves steel steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 30 | Each |
|---|
| 100 | 12.05 | Material and labour for denting to old chipped surfaces and preparing the ground externally/ internally with ready made putty complete all as specified and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 101 | 12.06 | Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 30 | Each |
|---|
| 102 | 13 | REPAIRS TO BOOK SHELVES OPEN SMALL STEEL, FD-69 :- | | | |
|---|
| 103 | 13.01 | Material and labour in replacement for angle iron of size 40mm x 40mm x 4 mm thick, 990 mm long including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 104 | 13.02 | Material and labour in replacement for shelf of book shelves steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 105 | 13.03 | Material and labour in replacement for back cover of book shelves steel steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 30 | Each |
|---|
| 106 | 13.04 | Material and labour in replacement for side cover of book shelves steel steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 107 | 13.05 | Material and labour for denting to old chipped surfaces and preparing the ground externally/ internally with ready made putty complete all as specified and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 108 | 13.06 | Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 109 | 14 | REPAIRS TO FORM WITHOUT BACK, FD-77 :- | | | |
|---|
| 110 | 14.01 | Material and labour in replacement for leg of form without back with 25 mm square tube of wall thickness 1.6 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 60 | Each |
|---|
| 111 | 14.02 | Material and labour in replacement for frame of form without back with 25 mm square tube of wall thickness 1.6 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 50 | Each |
|---|
| 112 | 14.03 | Material and labour in replacement for shisham wood plank in one piece of size 1525mm long x 255mm wide x 25 mm thick of form without back, fixed to frame with nuts, bolts and washers complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 100 | Each |
|---|
| 113 | 15 | Supply of new bucket made of 1 mm thick GI sheet, 340mm dia at top and 210 mm dia at bottom including two nos bracket of 50mm x 65mm x 3mm thick flat iron welded at top of bucket for holding 10 mm dia MS bar handle, 40mmx3mm MS flat iron rings provided at bottom of bucket and applying two coats of aluminium paint over a coat of red oxide primer after preparation of steel surface complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 150 | Each |
|---|
| 114 | 16 | REPAIRS TO TABLE TYPIST STEEL (FD-1006) | | | |
|---|
| 115 | 16.01 | Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 30 | Each |
|---|
| 116 | 16.02 | Material and labour in replacement for leg of table with 25 mm square tube of wall thickness 1.6 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 50 | Each |
|---|
| 117 | 16.03 | Material and labour in replacement for centre stiffener and long rail of table with 25 mm square table of all thickness 1.60 mmincluding necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 20 | Each |
|---|
| 118 | 16.04 | Material and labour in replacement for short stiffener and short rail of table with 25 mm square table of all thickness 1.60 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 119 | 16.05 | Material and labour in replacement for drawer of table made of 1 mm thick MS black sheet including making shape, welded with gas welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 30 | Each |
|---|
| 120 | 16.06 | Material and labour in replacement for hard rubber shoe of table of black colour as per existing as approved complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 120 | Each |
|---|
| 121 | 16.07 | Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 30 | Each |
|---|
| 122 | 17 | REPAIRS TO VARIOUS TYPE OF VISITOR CHAIR | | | |
|---|
| 123 | 17.01 | Material and labour in replacement for old unserviceable arms of chair any type and supply and fixing of new arms of PU/fibre of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 150 | Each |
|---|
| 124 | 17.02 | Material and labour in replacement for old Chromium plated steel surfaces and making Chromium plating after taking out all pipe and refitting after Chromium plating complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 150 | Each |
|---|
| 125 | 17.03 | Material and labour in replacement for old cloth and cushion for seat and back of chair by taking out seat and back, changing cloth of seat and back with leather / crape or matti of not less than Rs 200/- per meter including changing / replacement of foam cushion of seat and back with high density foam (as approved) of required existing thickness and size including all new hardware and accessories and refixing complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 300 | Each |
|---|
| 126 | 17.04 | Material and labour for polishing wooden arms of chair by scrubbing and applying lacquer polish one or more coat to achive required finish complete all as specified and shown in drawing and directed by the Engineer-in-Charge.. | | 150 | Each |
|---|
| 127 | 17.05 | Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge. | | 150 | Each |
|---|
| 128 | 18 | Repairs to various type of medium / low back / revolving chair | | | |
|---|
| 129 | 18.01 | Material and labour in replacement for old unserviceable steel base of chair and supply and fixing of new Steel base of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 85 | Each |
|---|
| 130 | 18.02 | Material and labour in replacement for old unserviceable fibre base of chair and supply and fixing of new fibre base of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 85 | Each |
|---|
| 131 | 18.03 | Material and labour in replacement for old unserviceable hydrolic of chair and supply and fixing of new hydrolic of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 170 | Each |
|---|
| 132 | 18.04 | Material and labour in replacement for old unserviceable tilt mechanism of chair and supply and fixing of new tilt mechanism of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 170 | Each |
|---|
| 133 | 18.05 | Material and labour in replacement for old unserviceable arms of chair any type and supply and fixing of new arms of PU/fibre of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 170 | Each |
|---|
| 134 | 18.06 | Material and labour in replacement for old unserviceable push back of chair and supply and fixing of new push back of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 170 | Each |
|---|
| 135 | 18.07 | Material and labour in replacement for old unserviceable wheel of chair and supply and fixing of new wheel of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 600 | Each |
|---|
| 136 | 18.08 | Material and labour in replacement for old unserviceable seat base of chair and supply and fixing of new seat base 12mm thick readymade as per existing of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 170 | Each |
|---|
| 137 | 18.09 | Material and labour in replacement for old unserviceable back base of chair and supply and fixing of new back base 12mm thick readymade as per existing of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 170 | Each |
|---|
| 138 | 18.1 | Material and labour in replacement for old polished wooden arms of chair by scrubbing and applying lacquer polish one or more coat to achive required finish complete all as specified and shown in drawing and directed by the Engineer-in-Charge. | | 150 | Each |
|---|
| 139 | 18.11 | Material and labour in replacement for old cloth and cushion for seat and back of chair by taking out seat and back, changing cloth of seat and back with leather / crape or matti of not less than Rs 200/- per meter including changing / replacement of foam cushion of seat and back with high density foam (as approved) of required existing thickness and size including all new hardware and accessories and refixing complete all as specified and directed | | 100 | Each |
|---|
| 140 | 19 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. | | | |
|---|
