| 1 | 1 | REPAIR TO CHAIR WOODEN BOTTOM / CHAIR BKB (FD- 285) | | | |
|---|
| 2 | 1.01 | Material and labour in replacement for seat of chair wooden bottom, made out of 6mm thick commercial plywood, BWR grade, (perforated in the centre) fixed with 12 Nos screws of suitable size, all as per drawing and as specified and directed by the Engineer-in-Charge | | 18 | Each |
|---|
| 3 | 1.02 | Material and labour in replacement for damaged front leg of chair wooden bottom with new leg of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 15 | Each |
|---|
| 4 | 1.03 | Material and labour in replacement for damaged rear leg of chair wooden bottom with new leg of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 14 | Each |
|---|
| 5 | 1.04 | Material and labour in replacement for damaged back rest of chair wooden bottom with new back rest of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 12 | Each |
|---|
| 6 | 1.05 | Material and labour in replacement for damaged side rail of chair wooden bottom with new side rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 14 | Each |
|---|
| 7 | 1.06 | Material and labour in replacement for damaged front rail of chair wooden bottom with new front rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge . | | 15 | Each |
|---|
| 8 | 1.07 | Material and labour in replacement for damaged back rail of chair wooden bottom with new back rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge . | | 14 | Each |
|---|
| 9 | 1.08 | Material and labour in replacement for damaged stiffener of chair wooden bottom with new stiffener of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 15 | Each |
|---|
| 10 | 1.09 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 18 | Each |
|---|
| 11 | 2 | REPAIRS TO CHAIR EASY (FD - 229) | | | |
|---|
| 12 | 2.01 | Material and labour in replacement for damaged front leg of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge | | 400 | Each |
|---|
| 13 | 2.02 | Material and labour in replacement for damaged rear leg of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge. | | 380 | Each |
|---|
| 14 | 2.03 | Material and labour in replacement for damaged arm-rest of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge . | | 400 | Each |
|---|
| 15 | 2.04 | Material and labour in replacement for damaged fillet for canning of seat and back of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge . | | 400 | Each |
|---|
| 16 | 2.05 | Material and labour in replacement for damaged rail of seat and back of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge. | | 400 | Each |
|---|
| 17 | 2.06 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 280 | Each |
|---|
| 18 | 3 | REPAIR TO CHAIR DINING (FD-279) | | | |
|---|
| 19 | 3.01 | Material and labour in replacement for damaged front leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 750 | Each |
|---|
| 20 | 3.02 | Material and labour in replacement for damaged rear leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge | | 740 | Each |
|---|
| 21 | 3.03 | Material and labour in replacement for damaged back rest of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 700 | Each |
|---|
| 22 | 3.04 | Material and labour in replacement for damaged stiffener of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 500 | Each |
|---|
| 23 | 3.05 | Material and labour in replacement for damaged side rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 700 | Each |
|---|
| 24 | 3.06 | Material and labour in replacement for damaged front rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 750 | Each |
|---|
| 25 | 3.07 | Material and labour in replacement for damaged back rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 720 | Each |
|---|
| 26 | 3.08 | Material and labour in replacement for damaged fillet for canning of seat of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge . | | 650 | Each |
|---|
| 27 | 3.09 | Material and labour in replacement for unserviceable seat of chair dining (Make- AMKO or as approved by GE) to be required shape & size all as per drawing and as specified and directed by the Engineer in Charge . | | 300 | Each |
|---|
| 28 | 3.1 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 750 | Each |
|---|
| 29 | 4 | REPAIR TO CHAIR DINING with cushion (FD/MAP) | | | |
|---|
| 30 | 4.01 | Material and labour in replacement for damaged front leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 300 | Each |
|---|
| 31 | 4.02 | Material and labour in replacement for damaged rear leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge | | 300 | Each |
|---|
| 32 | 4.03 | Material and labour in replacement for damaged back rest of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 250 | Each |
|---|
| 33 | 4.04 | Material and labour in replacement for damaged stiffener of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 300 | Each |
|---|
| 34 | 4.05 | Material and labour in replacement for damaged side rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 250 | Each |
|---|
| 35 | 4.06 | Material and labour in replacement for damaged front rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 300 | Each |
|---|
| 36 | 4.07 | Material and labour in replacement for damaged back rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 250 | Each |
|---|
| 37 | 4.08 | Material and labour in replacement for seat of chair dining with cushion, Seat shall be 12 mm thick BWR grade phenol bonded plywood, commercial vennered both sides, fixed to rails with 12 Nos. steel screws of suitable size. The seat ply shall be covered with removeabl 75 mm thick 32 density foam cushion with approved upholstery fabric of best quality as approved by the GE of rate Rs.300/- per meter. All as per drawing and as specified and directed by the Engineer-in-Charge | | 250 | Each |
|---|
| 38 | 4.09 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 250 | Each |
|---|
| 39 | 5 | REPAIR TO CHAIR WRITING (FD - 280 ) | | | |
|---|
| 40 | 5.01 | Material and labour in replacement for damaged front legs of Chair writing made out of well seasoned 1st class Teak wood, all as per drawing and as specified and directed by the Engineer-in-Charge. | | 400 | Each |
|---|
| 41 | 5.02 | Material and labour in replacement for damaged rear legs of Chair writing made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge . | | 400 | Each |
|---|
| 42 | 5.03 | Material and labour in replacement for damaged back rest of Chair writing made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge. | | 360 | Each |
|---|
| 43 | 5.04 | Material and labour in replacement for damaged stiffener of Chair writing made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge | | 300 | Each |
|---|
| 44 | 5.05 | Material and labour in replacement for damaged fillet for canning of seat of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | | 400 | Each |
|---|
| 45 | 5.06 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 300 | Each |
|---|
| 46 | 6 | REPAIR TO ALL TYPES OF STOOL DRESSING | | | |
|---|
| 47 | 6.01 | Material and labour in replacement for damaged leg of stool dressing with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge. | | 50 | Each |
|---|
| 48 | 6.02 | Material and labour in replacement for damaged front rail of stool dressing with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge. | | 50 | Each |
|---|
| 49 | 6.03 | Material and labour in replacement for damaged side rail of stool dressing with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 50 | 6.04 | Material and labour in replacement for old / unserviceable /damaged cushion of stool dressing with new cushion of 32 densitiy (Make - sleepwell/kurlon) duly covered with tapestry cloths, colour and shade as approved by GE(Cost not less than Rs 300/- per metre) complete with stiching, all as per drawing and as specified and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 51 | 6.05 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 40 | Each |
|---|
| 52 | 7 | REPAIR TO TABLE 3’ X 2’ (WITH / WITHOUT DRAWER) (FD-41.42.231.224.234.238 and 284) | | | |
|---|
| 53 | 7.01 | Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 180 | Each |
|---|
| 54 | 7.02 | Material and labour in replacement for leg of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 175 | Each |
|---|
| 55 | 7.03 | Material and labour in replacement for front rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 170 | Each |
|---|
| 56 | 7.04 | Material and labour in replacement for Drawer of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 60 | Each |
|---|
| 57 | 7.05 | Material and labour in replacement for side rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 160 | Each |
|---|
| 58 | 7.06 | Material and labour in replacement for stiffner of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 180 | Each |
|---|
| 59 | 7.07 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 180 | Each |
|---|
| 60 | 8 | REPAIR TO TABLE 900’ X 900’ X 760’ (FD-88 and FD- 291) | | | |
|---|
| 61 | 8.01 | Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 35 | Each |
|---|
| 62 | 8.02 | Material and labour in replacement for leg of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 30 | Each |
|---|
| 63 | 8.03 | Material and labour in replacement for front rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 25 | Each |
|---|
| 64 | 8.04 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 35 | Each |
|---|
| 65 | 9 | REPAIR TO TABLE WRITING (FD – 33,249,275) | | | |
|---|
| 66 | 9.01 | Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 140 | Each |
|---|
| 67 | 9.02 | Material and labour in replacement for leg of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 150 | Each |
|---|
| 68 | 9.03 | Material and labour in replacement for front rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 150 | Each |
|---|
| 69 | 9.04 | Material and labour in replacement for side rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 140 | Each |
|---|
| 70 | 9.05 | Material and labour in replacement for stiffner of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 125 | Each |
|---|
| 71 | 9.06 | Material and labour in replacement for shutter with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round including Knob and lock complete, all as specified and shown in drawing and as directed . | | 130 | Each |
|---|
| 72 | 9.07 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 140 | Each |
|---|
| 73 | 10 | REPAIR TO TABLE CENTRE (FD-274) | | | |
|---|
| 74 | 10.01 | Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 200 | Each |
|---|
| 75 | 10.02 | Material and labour in replacement for leg of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 200 | Each |
|---|
| 76 | 10.03 | Material and labour in replacement for front rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 200 | Each |
|---|
| 77 | 10.04 | Material and labour in replacement for side rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 180 | Each |
|---|
| 78 | 10.05 | Material and labour in replacement for stiffner of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 180 | Each |
|---|
| 79 | 10.06 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 200 | Each |
|---|
| 80 | 11 | REPAIR TO TEA POY (FD-232 and FD-382) | | | |
|---|
| 81 | 11.01 | Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 300 | Each |
|---|
| 82 | 11.02 | Material and labour in replacement for leg of teapoy of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 400 | Each |
|---|
| 83 | 11.03 | Material and labour in replacement for front rail of teapoy of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 300 | Each |
|---|
| 84 | 11.04 | Material and labour in replacement for side rail of teapoy of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 350 | Each |
|---|
| 85 | 11.05 | Material and labour in replacement for stiffner of teapoy of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 300 | Each |
|---|
| 86 | 11.06 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 300 | Each |
|---|
| 87 | 12 | REPAIR TO PEG TABLE (FD-277 and FD-384) | | | |
|---|
| 88 | 12.01 | Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 600 | Each |
|---|
| 89 | 12.02 | Material and labour in replacement for leg of peg table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 600 | Each |
|---|
| 90 | 12.03 | Material and labour in replacement for front/ side rail of peg table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 700 | Each |
|---|
| 91 | 12.04 | Material and labour in replacement for stiffner of teapoy of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 600 | Each |
|---|
| 92 | 12.05 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 600 | Each |
|---|
| 93 | 13 | REPAIR TO TABLE DINING FOR 6 / 8 PERSONS (FD-30, 273 and 376) | | | |
|---|
| 94 | 13.01 | Material and labour in replacement for table top of table dining six persons with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 70 | Each |
|---|
| 95 | 13.02 | Material and labour in replacement for table top of table dining eight persons with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 60 | Each |
|---|
| 96 | 13.03 | Material and labour in replacement for long rail of Table dinning (06 persons) of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 70 | Each |
|---|
| 97 | 13.04 | Material and labour in replacement for long rail of Table dinning (08 persons) of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 60 | Each |
|---|
| 98 | 13.05 | Material and labour in replacement for leg of Table dinning (08/06 persons) of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 130 | Each |
|---|
| 99 | 13.06 | Material and labour in replacement for short rail of Table dinning (08/06 persons) of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 130 | Each |
|---|
| 100 | 13.07 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 130 | Each |
|---|
| 101 | 14 | REPAIR TO TABLE DINING OF SIZE 1200MM X 900MM | | | |
|---|
| 102 | 14.01 | Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 60 | Each |
|---|
| 103 | 14.02 | Material and labour in replacement for long rail of Table dinning of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 60 | Each |
|---|
| 104 | 14.03 | Material and labour in replacement for leg of Table dinning of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 70 | Each |
|---|
| 105 | 14.04 | Material and labour in replacement for short rail of Table dinning of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed . | | 55 | Each |
|---|
| 106 | 14.05 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 60 | Each |
|---|
| 107 | 15 | BOOK CASE - FD- 237/ DB | | | |
|---|
| 108 | 15.01 | Material and labour in replacement for back of book case with 6 mm thick commercial ply wood BWR grade , ISI marked complete, all as specified and shown in drawing and as directed . | | 55 | Each |
|---|
| 109 | 15.02 | Material and labour in replacement for table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 60 | Each |
|---|
| 110 | 15.03 | Material and labour in replacement for shelves of book case, all as specified and shown in drawing and as directed . | | 50 | Each |
|---|
| 111 | 15.04 | Material and labour in replacement for door shutter with knob of book case, all as specified and shown in drawing and as directed . | | 50 | Each |
|---|
| 112 | 15.05 | Material and labour in replacement for leg of book case, all as specified and shown in drawing and as directed . | | 60 | Each |
|---|
| 113 | 15.06 | Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 55 | Each |
|---|
| 114 | 15.07 | Material and labour in replacement for cover of sofa cushion, size of cushion shall be 530 mm x 500mmx100mm thick, colour and shade as approved by GE(Cost not less than Rs 300/- per metre) complete with stiching and chain as per sample held with furniture yard | | 1200 | Each |
|---|
| 115 | 16 | REPAIR TO SIDE BOARD (FD – 26 M / 241) :- | | | |
|---|
| 116 | 16.01 | Material and labour in replacement for top of side board with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 50 | Each |
|---|
| 117 | 16.02 | Material and labour in replacement for bottom of side board with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 50 | Each |
|---|
| 118 | 16.03 | Material and labour in replacement for door shutter of side board with 18/19 mm thick one side teak faced pre-laminated particle board including CP knob, lock, hinges fixed to each shutter and 6 mm thick teak wood beading all around complete all as specified and shown in drawing and as directed. | | 80 | Each |
|---|
| 119 | 16.04 | Material and labour in replacement for drawer of side board including CP knob fixed to each drawer complete all as specified and shown in drawing and as directed . | | 100 | Each |
|---|
| 120 | 16.05 | Material and labour in replacement for back side of side board with 9 mm thick commercial ply wood , complete, all as specified and shown in drawing and as directed . | | 50 | Each |
|---|
| 121 | 16.06 | Material and labour in replacement for shelf of side board with 18/19 mm thick particle board , complete, all as specified and shown in drawing and as directed . | | 45 | Each |
|---|
| 122 | 16.07 | Material and labour in replacement for leg of side board of required size made out of well seasoned 1st class Teak wood, complete all as specified and shown in drawing and as directed . | | 60 | Each |
|---|
| 123 | 16.08 | Material and labour for preparation of old treated or new wood or wood based surfaces of side board and applying two coats of French polish all as specified and directed. | | 50 | Each |
|---|
| 124 | 17 | Table Bed Side (FD-248) | | | |
|---|
| 125 | 17.01 | Material and labour in replacement for top of side board with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 180 | Each |
|---|
| 126 | 17.02 | Material and labour in replacement for bottom of side board with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 160 | Each |
|---|
| 127 | 17.03 | Material and labour in replacement for door shutter of side board with 18/19 mm thick one side teak faced pre-laminated particle board including CP knob, lock, hinges fixed to each shutter and 6 mm thick teak wood beading all around complete all as specified and shown in drawing and as directed. | | 150 | Each |
|---|
| 128 | 17.04 | Material and labour in replacement for drawer of side board including CP knob fixed to each drawer complete all as specified and shown in drawing and as directed . | | 145 | Each |
|---|
| 129 | 17.05 | Material and labour in replacement for back side of side board with 9 mm thick commercial ply wood , complete, all as specified and shown in drawing and as directed . | | 140 | Each |
|---|
| 130 | 17.06 | Material and labour in replacement for shelf of side board with 18/19 mm thick particle board , complete, all as specified and shown in drawing and as directed . | | 145 | Each |
|---|
| 131 | 17.07 | Material and labour in replacement for leg of side board of required size made out of well seasoned 1st class Teak wood, complete all as specified and shown in drawing and as directed . | | 160 | Each |
|---|
| 132 | 17.08 | Material and labour for preparation of old treated or new wood or wood based surfaces of side board and applying two coats of French polish all as specified and directed. | | 150 | Each |
|---|
| 133 | 18 | REPAIRS TO TRESTLE STORE ROOM WOODEN (FD - 86) | | | |
|---|
| 134 | 18.01 | Material and labour in replacement for repair to trestle store room wooden by taking down the existing broken / unserviceable long rail and supply and fixing of new well seasoned second class hard wood Shisham long rail of size 2440mm x100mm x100mm all as per drawing and as specified and directed by the Engineer-in-Charge | | 60 | Each |
|---|
| 135 | 18.02 | Material and labour in replacement for repair to trestle store room wooden by taking down the existing broken / unserviceable leg and supply and fixing of new well seasoned second class hard wood Shisham leg of size 405mm x100mm x100mm all as per drawing and as specified and directed by the Engineer-in-Charge | | 80 | Each |
|---|
| 136 | 18.03 | Material and labour in replacement for repair to trestle store room wooden by taking down the existing broken / unserviceable stiffener and supply and fixing of new well seasoned second class hard wood Shisham leg of size 1980mm x175mm x100mm all as per drawing and as specified and directed by the Engineer-in-Charge | | 60 | Each |
|---|
| 137 | 18.04 | Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 30 | Each |
|---|
| 138 | 19 | REPAIR TO HAT STAND WITH MIRROR (FD-23 & 261) | | | |
|---|
| 139 | 19.01 | Material and labour in replacement for Looking Mirror of size 440mm x300mm x 5.5mm of approved quality (Make - Modi guard/Saint Gobin/Swastic) duly fixed with beading of size 35mm x 6mm made out of well seasoned teak wood duly finished all as per drawing and as directed by the Engineer in Charge. | | 70 | Each |
|---|
| 140 | 19.02 | Material and labour in replacement for Aluminium peg 100mm long as per sample shall be fixed with screw wood steel 25mm long all as per drawing and directed by the Engineer in Charge | | 150 | Each |
|---|
| 141 | 19.03 | Material and labour in replacement for MS plate for hanging of Hat stand as per approved sample shall be fixed to the back of the hat stand as shown on the drawing and as directed by the Engineer in Charge. | | 140 | Each |
|---|
| 142 | 19.04 | Material and labour in replacement for teak wood beading made out of well seaonsed teak wood of size 35mm x 6mm all around shall be provided to the frame of hat stand as shown on drawing and as directed by the Engineer in Charge. | | 70 | Each |
|---|
| 143 | 19.05 | Material and labour in replacement for Plywood 6mm thick commercial (Make-Green Ply/ Century / Archid) confirming to IS duly approved shall be provided whenever required to be fixed with head less nails at the back side of hat stand all as shown on drawing and as directed by the Engineer in Charge. | | 70 | Each |
|---|
| 144 | 19.06 | Material and labour in replacement for plywood one side teak face 4mm thick commerical confirming to IS duly approved shall be provided wherever required to be fixed with head ess nails at the front side of hat stand as shown on drawing and as directed by the Engineer in Charge. | | 70 | Each |
|---|
| 145 | 19.07 | Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 70 | Each |
|---|
| 146 | 20 | REPAIR TO BIN SOILED LINEN (FD - 70 M, FD-244, FD-212) | | | |
|---|
| 147 | 20.01 | Material and labour in replacement for New top of Bin soiled made out of 18/19mm thick wooden plank of seasoned teak to the the existing teak wood frame all as per drawing and as directed by the Engineer-in-Charge. | | 25 | Each |
|---|
| 148 | 20.02 | Material and labour in replacement for New sides of bin soiled (front or back) on existing old wooden frame made to shape and size with 18/19mm thick wooden plank all of seasoned teak as per drawing as and directed by the Engineer-in-Charge . | | 25 | Each |
|---|
| 149 | 20.03 | Material and labour in replacement for New legs to bin soiled (front or back) made to shape and size with 18/19mm thick wooden pank of seasoned leak wood all as per drawing and directed by the Engineer-in-Charge. | | 40 | Each |
|---|
| 150 | 20.04 | Material and labour in replacement for Back of bin soiled made out of 18/19mm thick wooden plank of seasoned teak and all as per drawing and as specified and directed by the Engineer-in-Charge | | 25 | Each |
|---|
| 151 | 20.05 | Material and labour in replacement for mild steel butt hinges of size 75mm, Medium weight, cold rolled all as per drawing and as specified and directed by the Engineer in Charge. | | 40 | Each |
|---|
| 152 | 20.06 | Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 25 | Each |
|---|
| 153 | 21 | REPAIR TO TABLE DRESSING LADIES (FD-251,FD-32,FD-378,FD/MAP-II/07) :- | | | |
|---|
| 154 | 21.01 | Material and labour in replacement for mirror of size 365 mm x 1220 mm x 5 mm thick of selected quality iincluding teak wood framing of size 45mm x 40mm and 6mm thick commercial type ply wood, BWR grade for back complete, all as specified and shown in drawing and as directed . (Make of mirror : MODI /ATUL/ SWASTIK) | | 165 | Each |
|---|
| 155 | 21.02 | Material and labour in replacement for sliding glass shutter of size 300mm x 290mm x 5 mm thick complete including sliding wheels and aluminium channel complete , all as per drawing and directed by Engr-in-Charge | | 200 | Each |
|---|
| 156 | 21.03 | Material and labour in replacement for leg of table dressing of required size made of well seasoned 1st class Teak hard wood complete, all as specified and shown in drawing and as directed . | | 200 | Each |
|---|
| 157 | 21.04 | Material and labour in replacement for bottom of table dressing with 18 / 19 mm thick particle board commercial type, exterior grade conforming to IS-3087-1989 , ISI marked complete, all as specified and shown in drawing and as directed . | | 160 | Each |
|---|
| 158 | 21.05 | Material and labour in replacement for side of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 170 | Each |
|---|
| 159 | 21.06 | Material and labour in replacement for back of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 160 | Each |
|---|
| 160 | 21.07 | Material and labour in replacement for top of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 160 | Each |
|---|
| 161 | 21.08 | Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 165 | Each |
|---|
| 162 | 22 | Table dressing gents with mirror (FD-31 /FD 233 / 379/MAP-16 ) | | | |
|---|
| 163 | 22.01 | Material and labour in replacement for mirror of size 760 mm x 300 mm x 5 mm thick of selected quality fixed including teak wood framing of 45mm x 40 mm size and 6 mm thick commercial type ply wood, BWR grade for back of morror complete all as specified and shown in drawing and as directed .(Make of mirror : MODI /ATUL/SWASTIC) | | 150 | Each |
|---|
| 164 | 22.02 | Material and labour in replacement for top of table dressing gents of size 900mm x300mm with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 140 | Each |
|---|
| 165 | 22.03 | Material and labour in replacement for bottom of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 150 | Each |
|---|
| 166 | 22.04 | Material and labour in replacement for side of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 180 | Each |
|---|
| 167 | 22.05 | Material and labour in replacement for back of table dressing gents with 12mm thick teak wood planks , complete, all as specified and shown in drawing and as directed . | | 140 | Each |
|---|
| 168 | 22.06 | Material and labour in replacement for drawer of table dressing gents with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed . | | 180 | Each |
|---|
| 169 | 22.07 | Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed. | | 150 | Each |
|---|
| 170 | 23 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. | | | |
|---|
