Welcome Maintenance Of Xanadu Bunglow Welcome Mace Of Xanadu Bunglow
Tender Value
9.81 Lakhs
Estimated cost
Bid Submission
26 Jun 2021
0 days left
EMD
14730
Bank guarantee accepted
Document Fee
2165
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
vazhuthacaud → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Welcome maintenance Of Xanadu Bunglow Welcome Mace Of Xanadu Bunglow
BOQ
| Work Name:GENERAL-XANADU BUNGALOW-Welcome maintenance works - 2021 for the new occupation of Hon'ble Minister-General Civil Work | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Appendix-1 | |||
| 2 | 1.001 | 14.72:Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done . | BI01010001010000000000000515BI0100001114 | 360 | sqm |
| 3 | 1.002 | 14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | BI01010001010000000000000515BI0100001115 | 1510.43 | sqm |
| 4 | 1.003 | 13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001116 | 577.674 | sqm |
| 5 | 1.004 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | BI01010001010000000000000515BI0100001117 | 1357.61 | sqm |
| 6 | 1.005 | 14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | BI01010001010000000000000515BI0100001118 | 2081.38 | sqm |
| 7 | 1.006 | 14.66.1:Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface | BI01010001010000000000000515BI0100001119 | 1686.78 | sqm |
| 8 | 1.007 | 14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work | BI01010001010000000000000515BI0100001120 | 547.22 | sqm |
| 9 | 1.008 | 14.58.1:French spirit polishing :One or more coats on old work | BI01010001010000000000000515BI0100001121 | 316.821 | sqm |
| 10 | 1.009 | 50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001122 | 5 | no |
| 11 | 1.01 | 50.17.1.5:Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001123 | 5 | no |
| 12 | 1.011 | 17.7.1:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | BI01010001010000000000000515BI0100001124 | 3 | each |
| 13 | 1.012 | 17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White | BI01010001010000000000000515BI0100001125 | 5 | each |
| 14 | 1.013 | 18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore | BI01010001010000000000000515BI0100001126 | 5 | each |
| 15 | 1.014 | 9.82:Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | BI01010001010000000000000515BI0100001127 | 2 | no |
| 16 | 1.015 | 18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore | BI01010001010000000000000515BI0100001128 | 5 | each |
| 17 | 1.016 | 18.22.2:Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter | BI01010001010000000000000515BI0100001129 | 4 | each |
| 18 | 1.017 | 18.54.2:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 122 mm long, weighing not less than 99 gms | BI01010001010000000000000515BI0100001130 | 5 | each |
| 19 | 1.018 | 50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001131 | 4 | no |
| 20 | 1.019 | 17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001132 | 4 | each |
| 21 | 1.02 | OD6838/2021-2022:Cleaning the shabby ceramic wall and floor tiles with Hydrochloric acid or detergent with water etc, complete | BI01010001010000000000000515BI0100001133 | 103 | sqm |
| 22 | 1.021 | OD7164/2021-2022:Proving and fixing two way tap of approved quality | BI01010001010000000000000515BI0100001134 | 5 | each |
| 23 | 1.022 | OD6786/2021-2022:Supplying PWD pattern roofing tile including all conveyance | BI01010001010000000000000515BI0100001135 | 100 | each |
| 24 | 1.023 | OD6684/2021-2022:Removing and readjusting with PWD roofing tiles of departmental or supplied tiles etc complete as per the direction of Engineer in charges. | BI01010001010000000000000515BI0100001136 | 276 | sqm |
| 25 | 1.024 | OD7281/2021-2022:Supplying mangalore hip and ridge tiles including cost of materials conveyance etc complete | BI01010001010000000000000515BI0100001137 | 20 | each |
| 26 | 1.025 | OD7235/2021-2022:Removing and re-adjusting with MP hip & ridge tiles of departmental or supplied tiles set in lime mortar and painting the exposed face etc. complete. | BI01010001010000000000000515BI0100001138 | 15 | metre |
| 27 | 1.026 | 12.5.1:Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limper and bitumen washers complete:1.60 mm thick with zinc coating not less than 350 gm/ m2 | BI01010001010000000000000515BI0100001139 | 20 | metre |
| 28 | 1.027 | 10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001140 | 162 | kg |
| 29 | 1.028 | OD6785/2021-2022:Providing and fixing wire netting mesh 12.5 x 12.5 mm or nearest available size of GI wire of dia 3mm including strengthening 2 mm dia wire or nuts bolts and washers as required etc complete as per the direction of Engineering in Charge | BI01010001010000000000000515BI0100001141 | 41.24 | sqm |
| 30 | 1.029 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):\nFor fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001142 | 18.641 | kg |
| 31 | 1.03 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | BI01010001010000000000000515BI0100001143 | 2.4 | sqm |
| 32 | 1.031 | 9.37.1:Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS : 1328 (type - 1) for plain lining / cladding with necessary screws, including priming coat on unexposed surface with:Decorative veneer facings of approved manufacture | BI01010001010000000000000515BI0100001144 | 6 | sqm |
| 33 | 1.032 | 12.45.1:Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1 | BI01010001010000000000000515BI0100001145 | 8 | sqm |
| 34 | 1.033 | OD7634/2021-2022:Hire charges of JCB for site clearing and other allied works | BI01010001010000000000000515BI0100001146 | 24 | hour |
| 35 | 1.034 | OD6787/2021-2022: Labour engaged for cleaning premises and stacking debris | BI01010001010000000000000515BI0100001147 | 5 | each |
| 36 | 1.035 | OD6793/2021-2022:Labour engaged for shifting, rearranging the furniture without damage direction of site engineer in charge | BI01010001010000000000000515BI0100001148 | 10 | each |
| 37 | 1.036 | OD6839/2021-2022:labour engaged for attending the petty repairs of Doors and windows | BI01010001010000000000000515BI0100001149 | 10 | no |
| 38 | 1.037 | OD6840/2021-2022:Labour engaged for attending the petty repairs of water supply and sanitary works. | BI01010001010000000000000515BI0100001150 | 8 | no |
| 39 | 1.038 | OD10861/2021-2022:Labour Engaged for repairs of steel works | BI01010001010000000000000515BI0100001151 | 6 | Day |
| 40 | 1.039 | 12.6.1:Providing and fixing of 40 cm overall width plain G.S. Sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 ( 1 cement : 3 coarse sand).1.00 mm thick with zinc coating not less than 275 gm/ m2 | BI01010001010000000000000515BI0100001152 | 64.4 | metre |
| 41 | 1.04 | 9.112:Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18x5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001153 | 170 | metre |
AI Tender Summary
Tender Timeline
Jun 19, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 26, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 28, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender