|
| 1 | R O Room :- Excavation for foundation/pipe trenches in earth, soils, of all types ,sand, gravel, and soft murum, including removing the excavated material up to a distance of 50 m and lift as below stacking and spreading. as directed ,normal dewatering, preparing the bed for foundation and Excluding back filling etc.complete |
| 2 | Providing and casting in situ cement concrete M-15 of trap / granite / quartzite / gneiss metal for steps including centering, formwork, compacting, roughening them if special finish is to be provided and curing and finishing if required complete,with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer ... With natural sand. |
| 3 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:5 in basements including scaffolding, bailing out water, racking out joints when plastering is to be done striking joints where no pointing or plastering is to be done and watering complete. |
| 4 | Providing selected hard murum filling including laying in layers of 15to 20cmwith watering and compacting etc. complete. |
| 5 | Providing and laying Rough Shahabad Stone Flooring 50mm to 60mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. etc. complete. |
| 6 | Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. |
| 7 | Providing flush grooved pointing with cement mortar 1:3 forbrick work including scaffolding and curing etc. complete. |
| 8 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gearoperation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc.complete. (I.S. 62481979) (Without mechanical gear) |
| 9 | Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium- Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25- 30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter-to-center. The end rib shall be designed fornticapacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) 600 mm girth (Surface Width). |
| 10 | Providing and fabricating structural steel work in rolled sectionslike joists, channels, angles, tees etc. as per detailed designand drawings or as directed including cutting, fabricating,hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc.and including one coat of anticorrosive paint and over it twocoats of oil painting of approved quality and shade etc.complete. |
| 11 | S.S.Skid - Providing and fixing S.S.Skid having 304 …. Etc complete. |
| 12 | Auto Panel PLC Board - Providing and fixing Auto Panel PLC Board of digital type make Astero… etc complete. |
| 13 | Raw Water Fidding Pump- Providing and erecting raw waterfidding pump of ISI mark having 1.00 HP & discharge 4000 LPH & 440 V ….etc complete. Make CRI |
| 14 | High Pressure Pump - Providing and erecting High Pressure Pump of ISI mark having 2.00 HP and discharge 7000.00 LPH & operating pressure 10 kg/cm2,motor single phase,220 V ,type:- vertical centrifugal pump Make- CRI ….. Etc complete. |
| 15 | Antiscalant dosing Pump - Providing and erecting Antiscalant Dosing Pumphaving dosing capacity 00 to 6.00 LPH ,dosing tank:- 100 ltrs HDPE,power:- 240 V single phase,make:- E DOSE/UKL etc complete. Make- E Dose |
| 16 | Dual media Sand Filter - Providing and fixing dual media Sand Filter having model 13 x 48 of 100 kgs, ,type:- centrifugal,max flow 3.00 m3/hr,working flow:- 2.000 m3/hr make paintair… etc complete |
| 17 | Activted Carbon Filter - Providing and fixing Activted Carbon Filter having model 13 x 48 of 75.00 kgs Carbon,valve size:-1\",max.fol w:-3.00 m3/hr,working flow:-3.00 m3/hrmake paintair… etc complete |
| 18 | Membrane housing- Providing and fixing Membrane housing of 4080 element make lotus blue… etc complete. |
| 19 | Multiport valve - Providing and fixing Multiport valve make initiativeb etc com |
| 20 | R O Membrane- Providing and fixing R O Membrane of 40*40 element No of membran 4, make dow/hydranautics… etc complete. |
| 21 | Micron Cartridge Filter - Providing and fixing Micron Cartidge Filter having size 20 inch,model:- MCF 20/wm/pptype of candle :- pp wound rating 5 micron operating flow 3.0 m3/hr,working flow:- 2.0 m3/hrmake PAINTAIR etc com |
| 22 | Pressure Guage - Providing and fixing Pressure Guage having pressure 300 Psi etc com. |
| 23 | Automatic Water Dispencing Macinen:- Providing and fixing Automatic Water Dispencing Macinen coin & ATM card Type make indo Medical helth Care |
| 24 | providing & fixing plumbing material required for 1000 LPHR O unit etc completen |
