| 1 | 1 | SH-I Ceiling fan, Exhaust fan, Wall fan & Air Circulator for CJ- 01\n\nSupply, installation, testing and commissioning of 1200 mm sweep Energy Saving ceiling fan working on 240V, 50 Hz, AC supply i/c wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated copper conductor, single core cable with all accessories double ball bearings, blades, down rod, shackle insulator, canopy etc. complete as required. | | 130 | Each |
|---|
| 2 | 2 | Supply, installation, testing and commissioning of 1400 mm sweep Energy Saving ceiling fan working on 240V, 50 Hz, AC supply i/c wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated copper conductor, single core cable with all accessories double ball bearings, blades, down rod, shackle insulator, canopy etc. complete as required. | | 30 | Each |
|---|
| 3 | 3 | Supplying, installation, testing and commissioning of 300mm sweep heavy duty exhaust fan with 900 RPM, double ball bearing, energy efficient motor working on 230V, 50 Hz, AC supplywith louver/shutter including all accessories connection with 3 core flexible wire in the existing opening, including making the hole to suit the size of the above fan, making good the damage i/c fixing of louver/shutter etc. complete as required. | | 55 | Each |
|---|
| 4 | 4 | Supplying, installation, testing and commissioning of 380mm sweep heavy duty exhaust fan with 900 RPM, double ball bearing, energy efficient motor working on 230V, 50 Hz, AC supply with louver/shutter including all accessories connection with 3 core flexible wire in the existing opening, including making the hole to suit the size of the above fan, making good the damage i/c fixing of louver/shutter etc. complete as required. | | 15 | Each |
|---|
| 5 | 5 | Supplying, installation, testing and commissioning of 450mm sweep heavy duty exhaust fan with 900 RPM, double ball bearing, energy efficient motor working on 230V, 50 Hz, AC supply with louver/shutter including all accessories connection with 3 core flexible wire in the existing opening, including making the hole to suit the size of the above fan, making good the damage i/c fixing of louver/shutter etc. complete as required. | | 10 | Each |
|---|
| 6 | 6 | Supplying, Installation, Testing and commissioning of 450mm sweep heavy duty wall mounted air circulator fan with double ball bearings, sturdy close-mesh guards with powder coating, aerodynamically designed blades for higher air delivery on the wall with dash fastener suitable for working on 240 V, 50 Hz, A.C. supply i/c connection etc. complete as required. | | 50 | Each |
|---|
| 7 | 7 | Supplying, Installation, Testing and commissioning of 400mm sweep oscillating type wall mounted bracket fan with aerodynamically designed balanced heavy duty PP blades, high quality ABS pull cord control for speed and oscillation on the wall with dash fastener suitable for working on 240 V, 50 Hz, A.C. supply i/c connection etc. complete as required. | | 10 | Each |
|---|
| 8 | 8 | SH-II Music system set up in CJ-2 \n\nSITC of 2-way loudspeaker System for Main FOH ( Front of the house) with minimum 1 x 15” driver (Only ) with 3” VC ( Voice coil) , HF of minimum of 1.70\" exit, Max SPL not less than 132db /1m (peak), with continuous RMS power of 600 - 800 Watt with programme power of 1200– 1600Watt RMS & peak power of 2400 - 3200 Watt RMS with minimum sensitivity of 98db, Nominal Impedance : 8 ohms, nominal dispersion angle of H : 90° x V 60° , in birch plywood paint finish only with wall mount bracket etc. complete as required. | | 4 | Each |
|---|
| 9 | 9 | SITC of 2-way loudspeaker stage monitor, with minimum 1 x 12” (Only ) 3” VC ( Voice coil) LF, HF - 1\" exit Max SPL not less than 128db /1m (peak), with continuous RMS power of 400 - 500 Watt with programme power of 800– 1000Watt RMS & peak power of 1600 - 2000 Watt RMS with minimum sensitivity of 97db, Nominal Impedance : 8 ohms, nominal dispersion angle :H 90° xV 60°, in birch plywood paint finish with wall mount bracket etc. complete as required. | | 2 | Each |
|---|
| 10 | 10 | SITC of high quality subwoofer with 1 x 21\" ( only ) LF driver 4.50\" VC,( Voice Coil) Max SPL( Sound Pressure Level) not less than 142 dB / 1m, continuous Power 1800 W RMS, with minimum sensitivity of 103 dB,Nominal Impedance 8 Ohms, birch plywood in paint finish complete with wheels in below for proper mobile application use etc. complete as required | | 2 | Each |
|---|
| 11 | 11 | Supply installation testing & commissioning of four Channel Power Class H/ D amplifier for Stage Monitor & Main Speakers, 4x1500W @ 2 ohms, 4x1250W @ 4 ohms, 4x900W @ 8 ohms, Damping factor > 450, as required. | | 2 | Each |
|---|
| 12 | 12 | Supply installation testing & commissioning of Dual Channel Class H Power amplifier for Subwoofers 2 x 1300W @ 8 ohms, 2 x 2000W @ 4 ohms, 2 x 2500W @ 2 ohms, with Damping factor > 850, etc. as required . | | 1 | Each |
|---|
| 13 | 13 | Supply installation testing & commissioning of Professional audio mixer with 16 channel mic inputs; 2 line inputs 2 stereo inputs; with inbuilt effects, graphic EQ etc. complete as reqd. | | 1 | Each |
|---|
| 14 | 14 | Supply installation testing & commissioning of 2 x 6 DSP ( Digital Sound processor) Loudspeaker Management System with Display, Impedance 120 ohms, sample rate 48kHz, THD 0.002%, etc as required. | | 1 | Each |
|---|
| 15 | 15 | Supply installation testing & commissioning of Cordless Handheld Microphone with UHF frequency (10 Selectable Frequencies) with 10 mV RF output, etc. complete as required. | | 2 | Each |
|---|
| 16 | 16 | Supply installation testing & commissioning of Cordless Lapel Microphone with UHF frequency (10 Selectable Frequencies) with 10 mV RF output, etc. complete as required. | | 1 | Each |
|---|
| 17 | 17 | Supply Installation testing & commissioning of Dynamic Vocal Microphone, polar pattern Super cardioid, Frequency Range 70-20000\nHz, Sensitivity2.5mV/Pa, Impedance <600 ohms etc.complete as reqd. | | 4 | Each |
|---|
| 18 | 18 | Supply Installation testing & commissioning of Dynamic Instrumental Microphone, polar pattern Super cardioid, Frequency Range 70-20000 Hz, Sensitivity2.5mV/Pa, Impedance <600 ohms etc as reqd. | | 4 | Each |
|---|
| 19 | 19 | Supply Installation testing & Commissioning of 18\" Gooseneck cardioid Microphone, polar pattern cardioid, Frequency Range 70- 18000 Hz, Sensitivity18mV/Pa, Impedance >2000 ohms. Complete with desk stand with switch etc. as reqd. | | 2 | Each |
|---|
| 20 | 20 | SITC of main SYSTEM RACK - M.S. Rack (minimum 24 U) with Power indicator, power sockets and isolator fitted duly prewired to accommodate Control Room equipments e.g. Amplifiers, Controller, Equalizer etc as required. | | 1 | Each |
|---|
| 21 | 21 | SITC of Wall mountable Speaker Brackets with X and Y axis rotation, Cast Iron with Powder Coated paint finish etc as reqd . | | 4 | Each |
|---|
| 22 | 22 | Supply Installation testing & Commissioning of PATCH CORDS ( for SYSTEM INTERCONNECT ) - High grade professional low-noise bable, 2-Core High conductivity PVC insulated in PVC jacket,shielded Copper Cable with di-electric insulator to prevent RF interference with necessary XLR male/female connectors EP Jacks / RCA Jacks etc as required | | 50 | Mtr. |
|---|
| 23 | 23 | Supply, laying & Fixing of Microphone Lines High grade, professional, Low-noise, 2-Core High conductivity PVC insulated in PVC Jacket, Shielded, copper cable with Di-electric insulator both end with XLR m/f connector etc as required. | | 300 | Mtr. |
|---|
| 24 | 24 | Supply, laying & Fixing of Speaker Lines: 2-Core, 2.5 sq mm High definition Speaker Cable, PVC insulated in PVC jacket laid in existing conduits etc as reqd. | | 300 | Mtr. |
|---|
| 25 | 25 | Supply installation testing & commissioning of Micorphone Connector Stage Junction Box - M.S. sheet made connector box, openable lid finished in stove enamelled paint accomodating connectors as reqd. | | 4 | Each |
|---|
| 26 | 26 | SH-III PA System at Jail No.2\n\nSITC of Power Amplifier, Rated Power 240W,Frequency Reponse 50-20,000 Hz or better speaker output conectivity with Ventilation fan cooling with power connsumption 238 W (EN60065),520 W (AC operation at rated output15 A ( DC operation at rated output) ,Ditortion 1% or less at 1 kHz ,1/3 rated power, all required accessories etc. all complete etc. as reqd. | | 8 | Each |
|---|
| 27 | 27 | SITC of Zoner System Management Amplifier with inbuilt 5 zone selector ; with inbuilt 4 audio inputs including background music input ; with inbuilt 240 watt rms 100v line amplifier for running multiple speakers. | | 2 | Each |
|---|
| 28 | 28 | SITC of Remote microphone unit connects to the Main unit for making emergency annoucement with inbuilt different zone selector with 7 minimum Zone inbulit buttons. | | 2 | Each |
|---|
| 29 | 29 | Supply installation testing & commissioning of Cordless Handheld Microphone with UHF frequency (10 Selectable Frequencies) with 10 mV RF output, etc. complete as required. | | 1 | Each |
|---|
| 30 | 30 | Supplying, Installation , Testing & Commissioning of premier Vocal Microphones with following specifications :Transducer Type: DynamicFrequency Response : 50Hz-15kHzPolar Pattern : Super-CardioidSensitivity : -50dB+- 3dBNominal Impedance : 350 ohmConnector : 3 pin XLR male\n | | 2 | Each |
|---|
| 31 | 31 | Supplying, Installation , Testing & Commissioning of 30 Watt Combination Type Horn Speaker with following specification:\nRated Input : 30W\nLine Voltage : 100 V or 70 V line \nRated Impedance: 100V line: 670? (30W), 1k? (15W), 2k? (10W), 3.3? (5W)/ 70V \nSound Pressure Level: 113 dB (1 W, 1 m at 500 Hz to 2.5 kHz peak level)\nFrequency Responcse: 280Hz - 10kHz\n | | 44 | Each |
|---|
| 32 | 32 | Supply, laying & Fixing of Speaker Lines: 2-Core, 2.5 sq mm High definition Speaker Cable, PVC insulated in PVC jacket laid in existing conduits etc as reqd. | | 3200 | Mtr. |
|---|
| 33 | 33 | SH-IV Ceiling fan, Exhaust fan, Wall fan & Air Circulator for CJ- 04\n\nSupply, installation, testing and commissioning of 1200 mm sweep Energy Saving ceiling fan working on 240V, 50 Hz, AC supply i/c wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated copper conductor, single core cable with all accessories double ball bearings, blades, down rod, shackle insulator, canopy etc. complete as required. | | 50 | Each |
|---|
| 34 | 34 | Supply, installation, testing and commissioning of 1400 mm sweep Energy Saving ceiling fan working on 240V, 50 Hz, AC supply i/c wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated copper conductor, single core cable with all accessories double ball bearings, blades, down rod, shackle insulator, canopy etc. complete as required. | | 100 | Each |
|---|
| 35 | 35 | Supplying, installation, testing and commissioning of 300mm sweep heavy duty exhaust fan with 900 RPM, double ball bearing, energy efficient motor working on 230V, 50 Hz, AC supply with louver/shutter including all accessories connection with 3 core flexible wire in the existing opening, including making the hole to suit the size of the above fan, making good the damage i/c fixing of louver/shutter etc. complete as required. | | 50 | Each |
|---|
| 36 | 36 | Supplying, installation, testing and commissioning of 380mm sweep heavy duty exhaust fan with 900 RPM, double ball bearing, energy efficient motor working on 230V, 50 Hz, AC supply with louver/shutter including all accessories connection with 3 core flexible wire in the existing opening, including making the hole to suit the size of the above fan, making good the damage i/c fixing of louver/shutter etc. complete as required. | | 100 | Each |
|---|
| 37 | 37 | Supplying, installation, testing and commissioning of 450mm sweep heavy duty exhaust fan with 900 RPM, double ball bearing, energy efficient motor working on 230V, 50 Hz, AC supply with louver/shutter including all accessories connection with 3 core flexible wire in the existing opening, including making the hole to suit the size of the above fan, making good the damage i/c fixing of louver/shutter etc. complete as required. | | 20 | Each |
|---|
| 38 | 38 | Supplying, Installation, Testing and commissioning of 450mm sweep heavy duty wall mounted air circulator fan with double ball bearings, sturdy close-mesh guards with powder coating, aerodynamically designed blades for higher air delivery on the wall with dash fastener suitable for working on 240 V, 50 Hz, A.C. supply i/c connection etc. complete as required. | | 220 | Each |
|---|
| 39 | 39 | Supplying, Installation, Testing and commissioning of 400mm sweep oscillating type wall mounted bracket fan with aerodynamically designed balanced heavy duty PP blades, high quality ABS pull cord control for speed and oscillation on the wall with dash fastener suitable for working on 240 V, 50 Hz, A.C. supply i/c connection etc. complete as required. | | 50 | Each |
|---|
| 40 | 40 | SH-V Ceiling fan, Exhaust fan, Wall fan & Air Circulator for CJ- 05\n\nSupply, installation, testing and commissioning of 1200 mm sweep Energy Saving ceiling fan working on 240V, 50 Hz, AC supply i/c wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated copper conductor, single core cable with all accessories double ball bearings, blades, down rod, shackle insulator, canopy etc. complete as required. | | 100 | Each |
|---|
| 41 | 41 | Supply, installation, testing and commissioning of 1400 mm sweep Energy Saving ceiling fan working on 240V, 50 Hz, AC supply i/c wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated copper conductor, single core cable with all accessories double ball bearings, blades, down rod, shackle insulator, canopy etc. complete as required. | | 20 | Each |
|---|
| 42 | 42 | Supplying, installation, testing and commissioning of 300mm sweep heavy duty exhaust fan with 900 RPM, double ball bearing, energy efficient motor working on 230V, 50 Hz, AC supply with louver/shutter including all accessories connection with 3 core flexible wire in the existing opening, including making the hole to suit the size of the above fan, making good the damage i/c fixing of louver/shutter etc. complete as required. | | 20 | Each |
|---|
| 43 | 43 | Supplying, installation, testing and commissioning of 380mm sweep heavy duty exhaust fan with 900 RPM, double ball bearing, energy efficient motor working on 230V, 50 Hz, AC supply with louver/shutter including all accessories connection with 3 core flexible wire in the existing opening, including making the hole to suit the size of the above fan, making good the damage i/c fixing of louver/shutter etc. complete as required. | | 80 | Each |
|---|
| 44 | 44 | Supplying, installation, testing and commissioning of 450mm sweep heavy duty exhaust fan with 900 RPM, double ball bearing, energy efficient motor working on 230V, 50 Hz, AC supply with louver/shutter including all accessories connection with 3 core flexible wire in the existing opening, including making the hole to suit the size of the above fan, making good the damage i/c fixing of louver/shutter etc. complete as required. | | 30 | Each |
|---|
| 45 | 45 | Supplying, Installation, Testing and commissioning of 450mm sweep heavy duty wall mounted air circulator fan with double ball bearings, sturdy close-mesh guards with powder coating, aerodynamically designed blades for higher air delivery on the wall with dash fastener suitable for working on 240 V, 50 Hz, A.C. supply i/c connection etc. complete as required. | | 14 | Each |
|---|
| 46 | 46 | Supplying, Installation, Testing and commissioning of 400mm sweep oscillating type wall mounted bracket fan with aerodynamically designed balanced heavy duty PP blades, high quality ABS pull cord control for speed and oscillation on the wall with dash fastener suitable for working on 240 V, 50 Hz, A.C. supply i/c connection etc. complete as required. | | 20 | Each |
|---|
| 47 | 47 | SH-VI Ceiling fan, Exhaust fan, Wall fan & Air Circulator for CJ- 8 & 9\n\nSupply, installation, testing and commissioning of 1200 mm sweep Energy Saving ceiling fan working on 240V, 50 Hz, AC supply i/c wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated copper conductor, single core cable with all accessories double ball bearings, blades, down rod, shackle insulator, canopy etc. complete as required. | | 350 | Each |
|---|
| 48 | 48 | Supply, installation, testing and commissioning of 1400 mm sweep Energy Saving ceiling fan working on 240V, 50 Hz, AC supply i/c wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated copper conductor, single core cable with all accessories double ball bearings, blades, down rod, shackle insulator, canopy etc. complete as required. | | 50 | Each |
|---|
| 49 | 49 | Supplying, installation, testing and commissioning of 300mm sweep heavy duty exhaust fan with 900 RPM, double ball bearing, energy efficient motor working on 230V, 50 Hz, AC supply with louver/shutter including all accessories connection with 3 core flexible wire in the existing opening, including making the hole to suit the size of the above fan, making good the damage i/c fixing of louver/shutter etc. complete as required. | | 250 | Each |
|---|
| 50 | 50 | Supplying, installation, testing and commissioning of 380mm sweep heavy duty exhaust fan with 900 RPM, double ball bearing, energy efficient motor working on 230V, 50 Hz, AC supply with louver/shutter including all accessories connection with 3 core flexible wire in the existing opening, including making the hole to suit the size of the above fan, making good the damage i/c fixing of louver/shutter etc. complete as required. | | 100 | Each |
|---|
| 51 | 51 | Supplying, Installation, Testing and commissioning of 450mm sweep heavy duty wall mounted air circulator fan with double ball bearings, sturdy close-mesh guards with powder coating, aerodynamically designed blades for higher air delivery on the wall with dash fastener suitable for working on 240 V, 50 Hz, A.C. supply i/c connection etc. complete as required. | | 34 | Each |
|---|
| 52 | 52 | Supplying, Installation, Testing and commissioning of 400mm sweep oscillating type wall mounted bracket fan with aerodynamically designed balanced heavy duty PP blades, high quality ABS pull cord control for speed and oscillation on the wall with dash fastener suitable for working on 240 V, 50 Hz, A.C. supply i/c connection etc. complete as required. | | 40 | Each |
|---|
