Repair And Painting Work In Existing It Lab And Cr 11 At Kashmere Gate Campus Of Dr B R Ambedkar University Delhi 110006
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Jun 2021
0 days left
EMD
8000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambedkar University Delhi, Lothian Road, Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Painting Work In Existing It Lab And Cr 11 At Kashmere Gate Campus Of Dr B R Ambedkar University Delhi 110006
BOQ
| Name of Work: Repair and painting work in existing IT and CR-11 at Kashmere Gate Campus of DR. B.R. Ambedkar University Delhi. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | BI01010001010000000000000515BI0100001113 | 284.37 | sqm |
| 3 | 1.02 | CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) | BI01010001010000000000000515BI0100001114 | 284.37 | sqm |
| 4 | 1.03 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved byEngineer-in-charge, beyond 50 m initial lead, for all leads including all lifts up to 10 km | BI01010001010000000000000515BI0100001114 | 8.79 | Cum |
| 5 | 1.04 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1cement: 4 fine sand) | BI01010001010000000000000515BI0100001114 | 10.5 | sqm |
| 6 | 1.05 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | BI01010001010000000000000515BI0100001114 | 888.8 | sqm |
| 7 | 1.06 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001114 | 1035.74 | sqm |
| 8 | 1.07 | Distempering with 1st quality acrylic distemper, having VOC (VolatileOrganic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required,to achieve even shade and colour. Two coats | BI01010001010000000000000515BI0100001114 | 1180.18 | sqm |
| 9 | 1.08 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | BI01010001010000000000000515BI0100001114 | 1180.18 | sqm |
| 10 | 1.09 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work | BI01010001010000000000000515BI0100001114 | 131.27 | sqm |
| 11 | 1.1 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm diameter | BI01010001010000000000000515BI0100001114 | 38 | meter |
| 12 | 1.11 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend | BI01010001010000000000000515BI0100001114 | 7 | Each |
| 13 | 1.12 | Providing and fixing gypsum board to existing frame work including joining and fixing to a flush finish of tapered and squared edges of board with reccomonded joining compound, joining tapes, etc complete as per manufacture's specification and direction of Engineer - in - charge (gypsum board of 12.5 mm thickness ) | BI01010001010000000000000515BI0100001114 | 30.5 | sqm |
| 14 | 1.13 | Providing and fixing 110mm to 75 mm PVC-Y reducer, 75mm to 50 mm socket and 100 mm socket to connect the drain of AC with 110 mm PVC pipe etc complete as per manufacture's specification and direction of Engineer - in - charge | BI01010001010000000000000515BI0100001114 | 3 | Each |
| 15 | 1.14 | Removing existing work station/ computer table of 4 to 5 partitions and refixing it to same location in the room with minor repair as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001114 | 10 | Each |
| 16 | 1.15 | Repairing and fixing the existing aluminum door with necessary screw and fittings as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001114 | 1 | 1 Job |
AI Tender Summary
Tender Timeline
Jun 18, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 24, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 24, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender