|
| 1 | Dismentalling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trail run for 10 hrs. in two spell complete as per direction of the Engineer-in-charge. [WR\"2020 Item No. 3.1] |
| 2 | Dismentaling of motor for vernishing, heating etc. complete in/c reinstallation and trail run for 10 hrs in two spell complete s per direction of Engineer-in-charge. [WR\"2020 Item No.3.32 ] |
| 3 | Repairing of 20/25 H.P starter by dismantling including changing of magnet coil,connected plate,finger etc spare parts whichever needed as per direction of the Engineer-in-charge. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 4 | Repairing of 200 amps main switch including changing necessary spare parts such as H.R.C fuse,gang,guide,feeder,nuts,bolts,etc whichever needed as per direction of the Engineer-in-charge. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 5 | Repairing of Busbar box including changing necessary burnt spares and copper strips etc as per direction of the Engineer-in-charge. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 6 | Providing & fitting fixing pvc suction hose pipe overall thickness 5mm of best quality at site of work (Pankaj made) of approved quality. [WR\"2020 Item No.3.21] i) 150 mm dia |
| 7 | ii) 125 mm dia |
| 8 | Providing & fitting fixing C.I foot valve of heavy duty at site of work of approved quality. [WR\"2020 Item No.3.23] (i) 150 mm dia. |
| 9 | (ii) 125 mm dia. |
| 10 | Providing & fitt6ing fixing MS hose clamp with nuts & bolts etc. complete at site of work of approved quality. [WR\"2020 Item No.3.23] (i) 150 mm dia. |
| 11 | (ii) 125 mm dia. |
| 12 | Providing & fitting fixing C.I tail piece of approved quality at site of work. [WR\"2020 Item No.3.23](i) 150 mm dia. |
| 13 | (ii) 125 mm dia. |
| 14 | Supply & fitting fixing ball bearing of approved quality for pump equired during overhauling.[WR\"2020 Item No.3.15]a) 6305 |
| 15 | Providing & fitting fixing C.I gland of approved quality. [WR\"2020 Item No.3.12] |
| 16 | Providing & fitting fixing Nuts & bolts full threaded 10mm dia and 100mm long (Stag nut) for gland of approved quality. [WR\"2020 Item No.3.13] |
| 17 | Providing & fitting fixing of leather foot valve washer of approved quality as per direction of the Engineer-in-charge.[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] (a) 200 mm dia. |
| 18 | Supplying and fixing wheel bearing grease of approved quality.[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 19 | Supplying and fixing Asbestor rope of approved quality.[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 20 | Charges for making G.I tail piece with M.s flange (8mm wall thickness) at one end and threading at other end including cutting threading, welding and fitting, fixing as per specification and the direction of the Engineer-In-Charge ( G.I Pipes will be supplied from the department free of cost) [DWS\"2015 Item No.9.16]a) 150 mm dia |
| 21 | b) 125 mm dia |
| 22 | Providing & fitting fixing coupling nuts & bolts (all size) of approved quality. [WR\"2020 Item No.3.3] |
| 23 | Providing & fitting fixing coupling rubber bush (all size) of approved quality. [WR\"2020 Item No.3.4] |
| 24 | Providing & fitting fixing Shaft sleeve nut of approved quality. Cast iron [WR\"2020 Item No.3.7] |
| 25 | Supplying and fitting fixing ofshaft gum bush of approved quality as per direction of the Engineer-in-charge. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 26 | Supplying and fitting fixing of stack nut for pump of approved quality(in different size). [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 27 | Supplying and fixing Asbestor rope of approved quality.[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19]a)125 mm dia |
| 28 | b)150 mm dia |
| 29 | Providing & fitting fixing Pump Shaft of approved quality. [ WR\"2020 Item No.3.6] |
| 30 | Supplying and fitting fixing of shaft lock of approved quality.[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 31 | Providing and fitting fixing of coupling of approved quality for pump motor as per direction of the Engineer-in-charge. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 32 | Supplying and fitting fixing of star coupling bush of approved quality. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 33 | Labour charge for mattaling,turning making alignment of pump motor shaft for suitable fitting coupling bearing sleeve bush etc as per direction of the Engineer-in-charge.[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 34 | Laboure charge for lifting of hose pipe[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 35 | Labour charge for dismantling of C.I sluice valve from existing delivery line as per direction of the Engineer-in-charge.[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] a)125mm dia |
| 36 | Charges for fixing C.I. sluice valves with cap complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) as per CPWD specification and direction of the Engineer- in-charge. [DWS\"2015 Item No. 2.27] v)125 mm dia. A.PN - 1.6 |
| 37 | Providing and fitting fixing of nuts,bolts with washer of approved quality.[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 38 | Providing and fitting fixing of nuts,bolts with washer of approved quality.[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 39 | Providing and fitting fixing of 40 mm dia following fittings as per direction of the Engineer-in-charge. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] a) Fullway valve (brass make) |
| 40 | b) Union joint (GI) |
| 41 | c) Elbow (GI) |
| 42 | d) Bend (GI) |
| 43 | e) Tee (GI) |
| 44 | f) Socket (GI) |
| 45 | Providing and fixing G.I. pipes medim class as per IS : 1239with latest amendment complete with G.I. fittings including cutting and making good the walls etc. complete as per chapter 20 of CPWD specification and direction of the Engineer- in - charge. [DWS\"2015 Item No.2.8]A. Internal work - Exposed on wall.v. 40 mm dia. nominal bore. |
| 46 | Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per chapter 20 of CPWD specification & direction of the Engineer - in - charge. [DWS\"2015 Item No.2.26]i. 125 mm dia. A. PN - 1.0 |
| 47 | ii. 150 mm dia. A. PN - 1.0 |
| 48 | Providing and fixing C.I. non-return valve of approved quality as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.[DWS\"2015 Item No.2.13] i. 125 mm nominal bore |
| 49 | Labour charge for fitting of 150 mm and 125 mm dia G.I pipe at the site of work as per direction of the Engineer-in-charge. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19]a) 150 mm dia |
| 50 | b) 125 mm dia |
| 51 | Supplying and fitting fixing of rubber flange washer of approved quality (150 mm dia and 125 mm dia).[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 52 | Providing & fitting fixing Steel sheet enclosed switch Fuse unit (Suitable for DIN fuse) triple pole with Neutral Link (TPN)\" 415/500 Volt, complete as per direction of Engineer-in-charge. [WR\"2020 Item No.3.64] i) Current range 63 Amps |
| 53 | ii) Current range 200 amps |
| 54 | Providing & fitting fixing of Fully Automatic Star Delta type Motor startar (3ph, 50 Hz, 415V 25HP/18.7 kw Relay range within 17-25) in steel sheet enclosure with Conductor, Timer etc. complete suitable for motor pump Havells/L&T/BCH make as per direction of Engineer-in-charge. [WR\"2020 Item No.3.65] |
| 55 | Supplying of new mineral Low viscous insulating oil (Transol/Electrol/power oil) for transformer, switch gear & 20/25 HP oil immersed starter as per direction of the Engineer-in-charge. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 56 | Supplying and fitting fixing of Magnet coil of approved quality.[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19]a) 63 Amps |
| 57 | c) 200 Amps |
| 58 | Suppying and fitting fixing of 7/16 Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pnnel board of approved quality. [WR\"2020 Item No. 3.71] |
| 59 | Supplying and fitting fixing AC Voltmeter (Moving Iron) on the panel board of approved quality. [WR\"2020 Item No.3.67] i) SMI - 144, Range 0-400 to 0-500 |
| 60 | Supplying and fitting fixing AC Ammeter(Moving Iron) on the panel board of approved quality. [WR\"2020 Item No.3.68] i) SMI - 144, Range 0-10 A. |
| 61 | Providing & fitting fixing of panel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS angle post (Size 50x50x6mm 2.80 Mtr. long) nuts & bolts etc. for errection of the same by 1:1.5:3 cement concrete casting (1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats of synthetic enamel paint on promer as per direction of Engineer-in-Charge.[WR\"2020 Item No.3.61]i) Size 1.80 x 1.20 x 0.025 mtr |
| 62 | Providing & fixing 200 Amps busbar of size 600x450x100 mm with 4 nos copper strip of size 450x40x4 mm of approved quality. [WR\"2020 Item No.3.70] |
| 63 | Labour for checking of panel board and making good the same including necesary dismantling washing and re-fixing of electrical equipment including detaching existing burned copper wire and connection and making fresh connection take electrical equipment and earthing with 8 S.W.G.G.I wire painting the pannel board with superior ready mixed paint including trial run complete as per direction of the Engineer-in-charge. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 64 | Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) ( 12 mm dia perforation ) , 2.50 mtr. Long , laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per stan-dard specification and direction of the Engineer-in-charge. i) For 3-phase connection with 4.00 mtr. long G.I pipe[DWS\"2015 Item No.7.7] |
| 65 | Supplying & fitting fixing power capacitor (ISI Marked) of approved quality.[WR\"2020 Item No.3.69]i) 12.5 KVAr |
| 66 | Providing and fitting fixing of single phase preventor of approved quality. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 67 | Supplying and fitting fixing of selector switch on the panel board of approved quality.[WR\"2020 Item No.3.72] |
| 68 | Supplying and fitting fixing of Indicator bulb ( Flush type containing 3 nos batton holder with bulb) on the panel board of approved quality. [WR\"2020 Item No.3.73] |
| 69 | Supplying & fitting fixing of 63 Amps kit cut for main & sub-main switch ( Male & Female).[WR\"2020 Item No.3.74] |
| 70 | Supplying & fitting fixing of 200 Amps kit cut for main & sub-main switch ( Male & Female).[WR\"2020 Item No.3.76] |
| 71 | Labour charged for clearence of mud, clay etc form pump house.[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 72 | Re-installation of 20/25 HP pump motor and cement conceret base (1.50m x 0.75m x 0.75m) with proportion of 1:2:4 mix including foundation bolt with M.S nuts bolts as per specification as per direction of the Engineer-in-charge.(including dismentality of old base of pump motor including carriage to office).[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 73 | Labour charge for taking out of the existing pump motor including M.S base from the existing C.S base and keeping the same under contaraction safe custody and dismantling the existion cement concrete base in proportion of 1:2:4 and disposal of rubbish from the pump house lifting a lead of 50 m as per direction of the Engineer-in-charge. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 74 | Repairing of impeller by welding, polishing etc complete as per direction of the Engineer-in-charge. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 75 | Providing and fitting of M.S flange (8 mm wall thickness) by welding with G.I/M.S pipe and placing position as per specification and the direction of the Engineer-in-charge. [DWS\"2015 Item No.7.19]a) 150 mm dia. |
| 76 | b) 125 mm dia. |
| 77 | Suppying & fitting fixing of G.Ibend of approved quality. [WR\"2020 Item No.3.16] a) 150 mm. dia. |
| 78 | b) 125 mm. dia. |
| 79 | Repair to shore manifold after dismantling the same from the alignment by providing MS sheet in lower portion with welding touches with C.I. stick at work-shop and re-fitting fixing the same at site of work as per direction of the Engineer-in-charge. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 80 | Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of Thermal release range 25-32 Amps, 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge.[DWS\"2015 Item No.7.8] |
| 81 | Providing and fitting fixing of motor terminal plate for various size of motor (20 HP to 30 HP) as per direction of the Engineer-in-Charge. [Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 82 | Providing and fixing G.I. equal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.[DWS\"2015 Item No.5.3]i. 125 x 125 x 125 mm dia |
| 83 | ii. 150 x 150 x 150 mm dia |
| 84 | Hiring charge of welding mechine.[Approvedrate vide Agreement No.:- Agree/65/EE/WRD/VI/KLS/2018-19] |
| 85 | Complete re-winding of 400/440 volt AC 3 phase horizontal motor of different make after taking out of entire burnt copper wire and rewinding the motor with proper gauge of supper enamel copper wire of approved quality, tapping, insulating, varnishing with vernish heating polishing and re-fitting the same as before including carriage of the motor from respective scheme and complete with trail run as per direction of the Engineer-in-charge. [ WR\"2020 Item No. 3.38] a) 20 HP |
| 86 | Complete re-winding of 400/440 volt AC 3 phase vertical submersible motor of different make after taking out of entire burnt copper wire and rewinding the motor with proper gauge of supper enamel copper wire of approved quality, tapping, insulating, varnishing with vernish heating polishing and re-fitting the same as before including carriage of the motor from respective scheme and complete with trail run as per direction of the Engineer-in-charge. [ WR\"2020 Item No. 3.42]i) 12.5 HP - 22.5 HP |
| 87 | Labour charge of lifting of 10,000 to 20,000 GPH water lubricated vertical submersible pump with motor includingcolumn assemblyupto 90 feets with heavy duty chain pulley and block as per direction of the Engineer-in-charge. Complete lifting [ WR\"2020 Item No. 3.44] |
| 88 | Labour charge for loweing & fifting fixing of 10,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 90 feets with heavyduty chain pulley andblock as per direction of the Engineer-in-charge.Complete lowering [ WR\"2020 Item No. 3.45] |
