Annual Rate Contract For Drilling Of Hand Pump / Tube Well Bore Installation Of Hand Pump / Tube Well In Various Gram Panchayat Area Of Panchayat Samiti Sultanpur , District Kota . Year 2021-22 Ubn Zkt2122wsrc00053

Tender Notice

28224037
Annual Rate Contract For Drilling Of Hand Pump / Tube Well Bore Installation Of Hand Pump / Tube Well In Various Gram Panchayat Area Of Panchayat Samiti Sultanpur , District Kota . Year 2021-22 Ubn Zkt2122wsrc00053
Indian
Rajasthan
17-06-2021
28-06-2021
30-06-2021

Tender Details

Annual Rate Contract For Drilling Of Hand Pump / Tube Well Bore Installation Of Hand Pump / Tube Well In Various Gram Panchayat Area Of Panchayat Samiti Sultanpur , District Kota . Year 2021-22 Ubn Zkt2122wsrc00053

Key Value

Document Fees
INR 1000 /-
EMD
INR 100000.00 /-
Tender Value
INR 50 Lakhs /-

BOQ Items

Name of Work: Annual Rate Contract for Drilling of Hand Pump / Tube well bore & Installation of Hand pump / Tube well in various Gram Panchayat area of Panchayat Samiti Sultanpur, District Kota
Sl. No. Item Description Item Code / Make Quantity Units
1 1.1 Costuction of tube well from ground level and up to 100 mtr. Depth and of following sizes all types of soils in alluvium strata unconsolidated formation such as pebbles boulders etc. by bailig method and without gravel packing as per IS:2800 part-I 1991 & part II 1979 (both amended upto date) and technical specifications the work includes formtion of cavity at bottom by development with appropriate air comressor or bailer pumping and also lowering of casing pipe but excluding cost of the cassing pipe. The tube well should have a throughtout bore as per nominal dia of cassing pipe . The work would be completed after obtaning sand free water . (PHED BSR 2019 Item No. 2.5) For 125 mm dia nominal bore 1 R.Mtr.
2 1.2 Costuction of tube well from ground level and up to 100 mtr. Depth and of following sizes all types of soils in alluvium strata unconsolidated formation such as pebbles boulders etc. by bailig method and without gravel packing as per IS:2800 part-I 1991 & part II 1979 (both amended upto date) and technical specifications the work includes formtion of cavity at bottom by development with appropriate air comressor or bailer pumping and also lowering of casing pipe but excluding cost of the cassing pipe. The tube well should have a throughtout bore as per nominal dia of cassing pipe . The work would be completed after obtaning sand free water . (PHED BSR 2019 Item No. 2.5) For 150 mm dia nominal bore 1 R.Mtr.
3 2.1 Costuction of tube well up to100 mtr. Depth and above in all type of rocks by DTH system and over burden'to accommodation casing pipe of following size in all types of soils and over burden including lowering of cashing pipes ( if required) excluding cost of the cassing pipe. as per IS:2800 part-I 1991 & IS:2800 part II 1979 (both amended upto date) and technical specifications The work would be completed after obtaning sand free water . The tube well should have a throughtout bore as per nominal dia of cassing pipe . (PHED BSR 2019 Item No. 2.45) For 125 mm dia nominal bore 1 R.Mtr.
4 2.2 Costuction of tube well up to100 mtr. Depth and above in all type of rocks by DTH system and over burden'to accommodation casing pipe of following size in all types of soils and over burden including lowering of cashing pipes ( if required) excluding cost of the cassing pipe. as per IS:2800 part-I 1991 & IS:2800 part II 1979 (both amended upto date) and technical specifications The work would be completed after obtaning sand free water . The tube well should have a throughtout bore as per nominal dia of cassing pipe . (PHED BSR 2019 Item No. 2.45) For 150 mm dia nominal bore 1 R.Mtr.
5 3.1 Supply of ERW M.S. Black casing pipe ISI marked IS:1239 (part 1: 2004) or amended up to date of following sizes (PHED BSR 2019 Item No. 2.47.2) For 125 mm Dai NB (Thickness of pipe 4.8 mm & mass of tube 16.40 kg/m ) (PHED BSR 2019 Item No. 2.47.2) 1 R.Mtr.
6 3.2 Supply of ERW M.S. Black casing pipe ISI marked IS:1239 (part 1: 2004) or amended up to date of following sizes (PHED BSR 2019 Item No. 2.47.2) For 150 mm Dai NB (Thickness of pipe 5 mm & mass of tube 20.13 kg/m ) (PHED BSR 2019 Item No. 2.11.1) 1 R.Mtr.
7 4.1 S/F of Bore well cover for m.s. sheet ( 6 mm thick) with nut & bolt complete for casing size. (PWD BSR 2013) For 125 mm dia 1 Each
8 4.2 S/F of Bore well cover for m.s. sheet ( 6 mm thick) with nut & bolt complete for casing size. (PWD BSR 2013) For 150 mm dia 1 Each
9 5 Supplying and installation of ISI Marked deep well HandPump Standerd (SDWP) set as per IS: 15500 : 2004 or as amended up to date compalete with cylinder & 15 Connecting roda. (PHED BSR 2019 Item No. 2.51) 1 Each
10 6 Providing & Lowering in tubewell ISI Markes GI Pipe "B" (medium) class as per IS : 1239 Part I 2004 or amended up to date, threaded and double flanged (welded) on both ends and two number 25x3 Flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. (PHED BSR 2019 Item No. 2.24) 32 mm dia 1 R.Mtr.
11 7 Installation of Deep well hand pump set, complete on existing plate form as per IS 15500: 2004 or as amended up to date. (PHED BSR 2019 Item No. 2.54) 1 Each
12 8 Construction of 185 cm dia platform as per approved design and drawing Typical Set up for deepwell hand pump of IS 15500 : 2004 or amended up to date complete work. (PHED BSR 2019 Item No. 2.55) 1 Each
13 9.1 Supply and installation of submersible motor pumps sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection sutiable for T.W./D.C.B./ Open well . The job includes lowering of riser pipe , G.I. pipe cables installation of complete fitting and accessories jointing of elecrical cables upto swich board . All labour for testing of submersible pumps set and supply of water maims complete in all respect . 100 mm dia (make CRI, KDR, MBH etc.) (PWD BSR 2013) 1.0 HP, 1-Ø, (30-78) mtr. (46-18) LPM 1 Each
14 9.2 Supply and installation of submersible motor pumps sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection sutiable for T.W./D.C.B./ Open well . The job includes lowering of riser pipe , G.I. pipe cables installation of complete fitting and accessories jointing of elecrical cables upto swich board . All labour for testing of submersible pumps set and supply of water maims complete in all respect . 100 mm dia (make CRI, KDR, MBH etc.) (PWD BSR 2013) 1.5 HP, 1-Ø, (36-71) mtr. (100-33) LPM 1 Each
15 10 Supplying and fixing of DOL starter pannel for Fllowing HP rating motors made out with MS powder coated sheet housing,protection relays for overload, short circuit and single phasing, On/Off buttons etc. ammeter, voltmeter, indicating lamps etc. complete in all respect. for single phase submersible pump upto 3hp. (PWD BSR 2013)\n 1 Each
16 11 Providing & Lowering in tubewell ISI Markes HDPE pipe as per IS 4984 : 1995 or amended upto dare in PE 80 grade and class PN 10 of following dia. Including HDPE/GI fitting and PVC rope confirming to IS 5175 : 1992 or amended upto date along with clamping of submersible cable etc. complete in all respect. (PHED BSR 2019 Item No. 2.25.1) (40mm dia) 1 R.Mtr
17 12 providing and laying ISI Marked PVC insulated submarsible cable with copper conductor of superior quality Confirming to IS; 694 inculding making connection etc. make as mentioned in specification. (Finolax, National, RR Kabal) \n(a) 2.50 Sq mm 3 core flate Group Ist. (PWD BSR 2013) 1 R.Mtr
18 13 Supplying and drawing FR PVC insulated and unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kv grade and approved make in existing surface of recessed conduit / casing capping including making connection etc. as required.\n3 x 1.5 sq. mm (PWD BSR 2013) 1 R.Mtr
19 14 Supply & fixing M.S. clamp, set of 50 x 6 mm flat from iron with nuts and bots etc. for holding the riser pipe assembly of submersible pump set (PHED BSR 2019 Item No. 2.22) 1 Each
20 15 Providing of Synthetic rope for submersible pump ISI mark (IS 5175) of size 12mm (PWD BSR 2013) 1 R.Mtr
21 16 Providing & fixing PVC storage tank confirming to ( IS :12701 marked indicating the BIS Licence NO. ) of approved make with cover 25 mm dia GI over over flow pipe and 25 cm long wash out pipe with plug and socket, including making connection etc. complex 1000 liters capaicaty (PWD BSR 2013) 1 Each
22 17 P\F steel gate grelling and grills made of angletees square bars or other flat black pipe with hold footand fitting complete as per desion and drawing including welding fabrication with primary coat of red oxide (Rates as per GBSR 2019) 1 Kg.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail