}

Construction Of Scrap Yard In 135 Mw Neepco, Agtccpp Power Plant Area, Ramchandra Nagar, Agartala, Tripura ( W ) As Per Nit, AGTCCPP,NEEPCO Ltd, R.C.Nagar-Tripura

North Eastern Electric Power Corporation Limited-NEEPCO has published Construction Of Scrap Yard In 135 Mw Neepco, Agtccpp Power Plant Area, Ramchandra Nagar, Agartala, Tripura ( W ) As Per Nit. Submission Date for this Tender is 15-07-2021. Civil Work Tenders in AGTCCPP,NEEPCO Ltd, R.C.Nagar Tripura. Bidders can get complete Tender details and download the document.




Tender Notice

28222211
Construction Of Scrap Yard In 135 Mw Neepco, Agtccpp Power Plant Area, Ramchandra Nagar, Agartala, Tripura ( W ) As Per Nit
Open Tender
Indian
Tripura
AGTCCPP,NEEPCO Ltd, R.C.Nagar
15-07-2021

Tender Details

Construction Of Scrap Yard In 135 Mw Neepco, Agtccpp Power Plant Area, Ramchandra Nagar, Agartala, Tripura ( W ) As Per Nit

Key Value

Document Fees
INR 1000 /-
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work: < Construction of Scrap yard in 135 MW NEEPCO, AGTCCPP Power plant area, Ramchandra Nagar, Agartala, Tripura(W)>
Sl. No. Item Description
1Loosening, Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.2 for embankment construction as per MoRT&H Technical Specification clauses 301.4.1
2Construction of embankment with approved material obtained from borrow pits with all lifts upto 1.5 m transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD Technical Specification clauses 301.5
3Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms,lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m. All kinds of soil.By manual means.
4Supplying and filling in plinth, under floor, foundations etc. with sand (fine) fron local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
5Providing and laying in position specified grade ofcement concrete excluding the cost of centring and shuttering - all works upto plinth level: 1:2:4 (1 cement:2 fine sand: 4 graded stone aggregate of 20 mm nominal size)
6Providing structural steel work in single section fixed with or withoutconnecting plate including cutting hoisting fixing in position and applying a priming coat of approved steel primer all completeas required.
7First class brick work in foundation and plinth including cost of all materialsas required complete: In cement mortar 1:4 (1 Cement : 4 Fine sand)
8Half brick masonary work with first class bricks in foundation and plinthincluding cost of all materials as required complete: In cement mortar 1:4( 1 cement : 4 fine sand)
9Providing and laying brick on edge flooring in cement mortar including cement slurry etc. complete.In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
1012 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete.In cement mortar 1:4 ( 1 cement : 4 fine sand ).
11Providing , fitting and fixingchain link fencing of suitable height as per drawing of G.I Wire 4 mm dia of mesh size 75 mm x 75 mm x4 mm with suitable angle post by making three nos of holes of required size for fixing the chain link fencing of standard design placed every 2.00 m apart , embedded in cement concrete blocks & corner end , every 10 th post or as per direction by the E-I-Cto be strutted provided with 3 horizontal lines between two posts fitted and fixed with G.I staples tied to the angulariron post with binding wire ( cost of PCC base struts earth work , concrete, M.S postto be paid for separately)
12Painting with aluminium paint( two or more coats ) of approved brand and manufacture of required colour on new work to give an even shade
13Finishing walls with premium acrylic smooth exterior paint with Silicon additives of required shade of approved brand and manufacture . New work ( two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail