Construction Of Subsidiary Correctional Home At Chanchal- ( Part-2 ) - Balance Work . ( 1St Call )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Jul 2021
0 days left
EMD
23.38 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chanchal → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Subsidiary Correctional Home At Chanchal- ( Part-2 ) - Balance Work . ( 1St Call )
BOQ
| Name of Work: Construction Of Subsidiary Correctional Home At Chanchal- (Part-2) - Balance Work. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Civil works | BI01010001010000000000000515BI0100001112 | ||
| 2 | 2 | Earth work in excavation of foundation trenches of drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing spreading or stacking the spoils with in a lead of 75m. As directed. The item includes necessary trim-ming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water etc. as required complete. Depth of excavation not execeeding 1,500 mm | BI01010001010000000000000515BI0100001113 | 6000 | CU.M |
| 3 | 3 | Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. | BI01010001010000000000000515BI0100001114 | 2200 | CU.M |
| 4 | 4 | Earth work in filling in foundation trenches or plinth with good earth, in layer not exceeding 150mm including watering and ramming etc. layer by layer complete a) With earth obtained from excavation of foundation. | BI01010001010000000000000515BI0100001115 | 7900 | CU.M |
| 5 | 5 | (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) | BI01010001010000000000000515BI0100001116 | 6500 | CU.M |
| 6 | 6 | Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete.\n(Payment will be made on profile measurement before and after the work)\nWith carried earth arranged by the contractor\nwithin a radius exceeding 3 km. but not exceeding 5\nkm. including the cost of carried earth. | BI01010001010000000000000515BI0100001117 | 12400 | Cum |
| 7 | 7 | Removal of rubbish,earth etc. from the working\nsite and disposal of the same beyond the\ncompound, in conformity with the Municipal /\nCorporation Rules for such disposal, loading into\ntruck and cleaning the site in all respect as per\ndirection of Engineer in charg | BI01010001010000000000000515BI0100001118 | 1000 | Cum |
| 8 | 8 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level, and filling joints with powered or local sand. | BI01010001010000000000000515BI0100001119 | 4132.5 | SQ.M |
| 9 | 9 | (I) Cement concrete with graded stone ballast (40 mm size excluding shuttering)\nIn ground floor (B)With PAKUR Variety 1:3:6 | BI01010001010000000000000515BI0100001120 | 358 | CU.M |
| 10 | 10 | Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.\n[using concrete mixture] \n(b) M 25 Grade \n(i) Pakur VarietyGROUND FLOOR | BI01010001010000000000000515BI0100001121 | 1500 | CU.M |
| 11 | 11 | Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.\n[using concrete mixture] \n(b) M 25 Grade \n(i) Pakur Variety1ST FLOOR | BI01010001010000000000000515BI0100001122 | 400 | CU.M |
| 12 | 12 | Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.\n[using concrete mixture] \n(b) M 25 Grade \n(i) Pakur VarietySECOND FLOOR | BI01010001010000000000000515BI0100001123 | 50 | CU.M |
| 13 | 13 | Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.\n[using concrete mixture] \n(b) M 25 Grade THIRD FLOOR | BI01010001010000000000000515BI0100001124 | 5 | CU.M |
| 14 | 14 | Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.\n[using concrete mixture] \n(b) M 20 Grade \n(i) Pakur Variety | BI01010001010000000000000515BI0100001125 | 300 | CU.M |
| 15 | 15 | Dismantling R.C. floor, roof, beams etc. including\ncutting rods and removing rubbish as directed\nwithin a lead of 75 m. including stacking of steel\nbars.\n(a) In ground floor including roof. | BI01010001010000000000000515BI0100001126 | 10 | CU.M |
| 16 | 16 | Hire and labour charges for shuttering with centreing and necessary staging up to 4m using approved stout props thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, linteles curved or straight including fitting, fixing and striking out after complition of works upto roof og GF a)9 to 12 mm thick approved quality ply board shuttering in any concrete work GROUND FLOOR | BI01010001010000000000000515BI0100001127 | 7000 | SQ.M |
| 17 | 17 | Hire and labour charges for shuttering with centreing and necessary staging up to 4m using approved stout props thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, linteles curved or straight including fitting, fixing and striking out after complition of works upto roof og GF a)9 to 12 mm thick approved quality ply board shuttering in any concrete work 1ST FLOOR | BI01010001010000000000000515BI0100001128 | 3500 | SQ.M |
| 18 | 18 | Hire and labour charges for shuttering with centreing and necessary staging up to 4m using approved stout props thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, linteles curved or straight including fitting, fixing and striking out after complition of works upto roof og GF a)9 to 12 mm thick approved quality ply board shuttering in any concrete work 2nd FLOOR | BI01010001010000000000000515BI0100001129 | 350 | SQ.M |
| 19 | 19 | Hire and labour charges for shuttering with centreing and necessary staging up to 4m using approved stout props thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, linteles curved or straight including fitting, fixing and striking out after complition of works upto roof og GF a)9 to 12 mm thick approved quality ply board shuttering in any concrete work 3rd floor | BI01010001010000000000000515BI0100001130 | 50 | SQ.M |
| 20 | 20 | Reinforcement for reinforced concrete work in all sorts structure including distribution bars, stirrups, binders etc. including of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length , hooking and bending with 16 gauge black annealed wire at every inter section, complete as per drawing and direction.For work in foundation,basement and and upto roof of Ground Floor. (i) Tor Steel/Mild Steel.SAIL/TATA/RINL | BI01010001010000000000000515BI0100001131 | 200 | M.T |
| 21 | 21 | Reinforcement for reinforced concrete work in all sorts structure including distribution bars, stirrups, binders etc. including of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length , hooking and bending with 16 gauge black annealed wire at every inter section, complete as per drawing and direction.(i) Tor Steel/Mild Steel.SAIL/TATA/RINL1ST FLOOR | BI01010001010000000000000515BI0100001132 | 50 | M.T |
| 22 | 22 | Reinforcement for reinforced concrete work in all sorts structure including distribution bars, stirrups, binders etc. including of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length , hooking and bending with 16 gauge black annealed wire at every inter section, complete as per drawing and direction.(i) Tor Steel/Mild Steel.SAIL/TATA/RINLSECOND FLOOR | BI01010001010000000000000515BI0100001133 | 5 | M.T |
| 23 | 23 | Reinforcement for reinforced concrete work in all sorts structure including distribution bars, stirrups, binders etc. including of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length , hooking and bending with 16 gauge black annealed wire at every inter section, complete as per drawing and direction.(i) Tor Steel/Mild Steel.SAIL/TATA/RINL3rd floor | BI01010001010000000000000515BI0100001134 | 0.5 | M.T |
| 24 | 24 | Brick work with 1st class bricks in cement mortar (1:6) in (a) In foundation and plinth | BI01010001010000000000000515BI0100001135 | 772 | CU.M |
| 25 | 25 | Brick work with 1st class bricks in cement mortar (1:6) in Super Structure ,Ground Floor | BI01010001010000000000000515BI0100001136 | 350 | CU.M |
| 26 | 26 | Brick work with 1st class bricks in cement mortar (1:6) in 1ST FLOOR | BI01010001010000000000000515BI0100001137 | 250 | CU.M |
| 27 | 27 | Brick work with 1st class bricks in cement mortar (1:6) in 2nd floor | BI01010001010000000000000515BI0100001138 | 30 | CU.M |
| 28 | 28 | Brick work with 1st class bricks in cement mortar (1:6) in 3rd floor | BI01010001010000000000000515BI0100001139 | 21 | CU.M |
| 29 | 29 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4)in Ground Floor. Extra for using approved H.B. netting in every 3rd layer.Ground Floor. | BI01010001010000000000000515BI0100001140 | 920 | sqm |
| 30 | 30 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4)in Ground Floor. Extra for using approved H.B. netting in every 3rd layer1ST FLOOR | BI01010001010000000000000515BI0100001141 | 480 | sqm |
| 31 | 31 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4)in Ground Floor. Extra for using approved H.B. netting in every 3rd layer2nd floor | BI01010001010000000000000515BI0100001142 | 235 | sqm |
| 32 | 32 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4)in Ground Floor. Extra for using approved H.B. netting in every 3rd layer3rd floor | BI01010001010000000000000515BI0100001143 | 30 | sqm |
| 33 | 33 | 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface). [Note: - Waterproofing as per item NO 60, polymer based paint as per item 59 (a) of Section (C). | BI01010001010000000000000515BI0100001144 | 200 | SQ.M |
| 34 | 34 | Labour for Chipping of concrete surface before taking up Plastering work. | BI01010001010000000000000515BI0100001145 | 10000 | SQ.M |
| 35 | 35 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal : MalayasianAt Ground Floor | BI01010001010000000000000515BI0100001146 | 6 | CU.M |
| 36 | 36 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal : Malayasian1ST FLOOR | BI01010001010000000000000515BI0100001147 | 5 | CU.M |
| 37 | 37 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal : Malayasian 2nd floor | BI01010001010000000000000515BI0100001148 | 2 | CU.M |
| 38 | 38 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.\nIn ground floor.(In case of non-supply of single plank, penal rate of reduction of 20% will be made)\n(iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.\n(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.GROUND FLOOR | BI01010001010000000000000515BI0100001149 | 250 | SQ.M |
| 39 | 39 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.\nIn ground floor.(In case of non-supply of single plank, penal rate of reduction of 20% will be made)\n(iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.\n(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.1ST FLOOR | BI01010001010000000000000515BI0100001150 | 200 | SQ.M |
| 40 | 40 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.\nIn ground floor.(In case of non-supply of single plank, penal rate of reduction of 20% will be made)\n(iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.\n(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.2nd floor | BI01010001010000000000000515BI0100001151 | 60 | SQ.M |
| 41 | 41 | Shutters of 2/3rd panel and 1/3rd glazed of doors and windows as per design\n(each panel consisting of a single plank without joint and with ordinary glass of\n7.4kg. Per sq.m./3mm thick) fitted with putty bed and teak wood beads and nails\nincluding fitting and fixing shutters in position but excluding the cost of glass,\nputty, teak bead, nails, hinges etc. and other fittings, in ground floor. 35mm thick shutters with 19mm thick panel Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak. GROUND FLOOR | BI01010001010000000000000515BI0100001152 | 62 | SQ.M |
| 42 | 42 | Shutters of 2/3rd panel and 1/3rd glazed of doors and windows as per design\n(each panel consisting of a single plank without joint and with ordinary glass of\n7.4kg. Per sq.m./3mm thick) fitted with putty bed and teak wood beads and nails\nincluding fitting and fixing shutters in position but excluding the cost of glass,\nputty, teak bead, nails, hinges etc. and other fittings, in ground floor. 35mm thick shutters with 19mm thick panel Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak. 1ST FLOOR | BI01010001010000000000000515BI0100001153 | 44 | SQ.M |
| 43 | 43 | Supplying solid flush type doors of commercial quality, the timber frame\nconsisting of top and bottom rails and side styles of well seasoned timber 65mm\nwide each and the entire frame fitted with 37.5mm wide battens places both ways\nin order to make the door of solid core and internal lipping with Garjan or\nsimilar wood veneers using phenol formaldehyde as glue etc. complete, including\nfitting, fixing shutters in position but excluding the cost of hinges and other\nfittings in ground floor.: 35mm thick shutters (single leaf)GROUND FLOOR | BI01010001010000000000000515BI0100001154 | 5 | SQ.M |
| 44 | 44 | Supplying solid flush type doors of commercial quality, the timber frame\nconsisting of top and bottom rails and side styles of well seasoned timber 65mm\nwide each and the entire frame fitted with 37.5mm wide battens places both ways\nin order to make the door of solid core and internal lipping with Garjan or\nsimilar wood veneers using phenol formaldehyde as glue etc. complete, including\nfitting, fixing shutters in position but excluding the cost of hinges and other\nfittings in ground floor.: 35mm thick shutters (single leaf)1ST FLOOR | BI01010001010000000000000515BI0100001155 | 5 | SQ.M |
| 45 | 45 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. (ii) c/ With 1:4 cement mortar ,b) 10 mm thick plaster. Ceiling Plaster. GROUND FLOOR | BI01010001010000000000000515BI0100001156 | 3000 | SQ.M |
| 46 | 46 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. (ii) c/ With 1:4 cement mortar ,b) 10 mm thick plaster. Ceiling Plaster.1ST FLOOR | BI01010001010000000000000515BI0100001157 | 2400 | SQ.M |
| 47 | 47 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. (ii) c/ With 1:4 cement mortar ,b) 10 mm thick plaster. Ceiling Plaster.2nd floor | BI01010001010000000000000515BI0100001158 | 300 | SQ.M |
| 48 | 48 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. (ii) c/ With 1:4 cement mortar ,b) 10 mm thick plaster. Ceiling Plaster.3rd floor | BI01010001010000000000000515BI0100001159 | 30 | SQ.M |
| 49 | 49 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With 1:4 cement mortar a) 20mm thick plaster OUTSIDE. GROUND FLOOR | BI01010001010000000000000515BI0100001160 | 9957.5 | SQ.M |
| 50 | 50 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With 1:4 cement mortar a) 20mm thick plaster1ST FLOOR | BI01010001010000000000000515BI0100001161 | 2700 | SQ.M |
| 51 | 51 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With 1:4 cement mortar a) 20mm thick plaster2nd floor | BI01010001010000000000000515BI0100001162 | 800 | SQ.M |
| 52 | 52 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With 1:4 cement mortar a) 20mm thick plaster3rd floor | BI01010001010000000000000515BI0100001163 | 300 | SQ.M |
| 53 | 53 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With 1:4 cement mortar b) 15mm thick plaster INSIDEGROUND FLOOR | BI01010001010000000000000515BI0100001164 | 4300 | SQ.M |
| 54 | 54 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With 1:4 cement mortar b) 15mm thick plaster INSIDE1ST FLOOR | BI01010001010000000000000515BI0100001165 | 3400 | SQ.M |
| 55 | 55 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With 1:4 cement mortar b) 15mm thick plaster INSIDE2nd floor | BI01010001010000000000000515BI0100001166 | 1000 | SQ.M |
| 56 | 56 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With 1:4 cement mortar b) 15mm thick plaster INSIDE3rd floor | BI01010001010000000000000515BI0100001167 | 50 | SQ.M |
| 57 | 57 | Extra for fluted, corrugated or ribbed plaster (over rate of corresponding rate of plaster). (Cement 0.135 Cu.m/100Sq.m) | BI01010001010000000000000515BI0100001168 | 150 | SQ.M |
| 58 | 58 | Making V-groove line ( 6 mm. wide, 6 mm. deep) in plastered surface. | BI01010001010000000000000515BI0100001169 | 300 | Mtr |
| 59 | 59 | Making V-groove line ( 12 mm wide,12 mm deep) in plastered surface. | BI01010001010000000000000515BI0100001170 | 300 | Mtr |
| 60 | 60 | Neat Cement Punning above 1.5mm thick in Wall dado,Window Sill Floor and Drain etc Note Cement 0.152 cum 100 Sqmts | BI01010001010000000000000515BI0100001171 | 7507.5 | SQ.M |
| 61 | 61 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) All floors Inside | BI01010001010000000000000515BI0100001172 | 4000 | SQ.M |
| 62 | 62 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Two Coat Water based interior grade Acrylic Primer All Floors Inside | BI01010001010000000000000515BI0100001173 | 4000 | SQ.M |
| 63 | 63 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.\nTwo Coats All Floors Inside\"\n | BI01010001010000000000000515BI0100001174 | 4000 | SQ.M |
| 64 | 64 | White washing including cleaning and smoothening surface thoroughly.(b) Three coats (to be done on specificinstruction). InsideGROUND FLOOR | BI01010001010000000000000515BI0100001175 | 10145 | SQ.M |
| 65 | 65 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (Two Coat)GROUND FLOOR | BI01010001010000000000000515BI0100001176 | 5000 | SQ.M |
| 66 | 66 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (Two Coat)1ST FLOOR | BI01010001010000000000000515BI0100001177 | 3000 | SQ.M |
| 67 | 67 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (Two Coat)2nd floor | BI01010001010000000000000515BI0100001178 | 650 | SQ.M |
| 68 | 68 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (Two Coat)3rd flooor | BI01010001010000000000000515BI0100001179 | 300 | SQ.M |
| 69 | 69 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (Two Coat)GROUND FLOOR\nNormal Acrylic Emulsion | BI01010001010000000000000515BI0100001180 | 5000 | SQ.M |
| 70 | 70 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (Two Coat)1ST FLOOR\nNormal Acrylic Emulsion | BI01010001010000000000000515BI0100001181 | 3000 | SQ.M |
| 71 | 71 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (Two Coat)2nd floor \nNormal Acrylic Emulsion | BI01010001010000000000000515BI0100001182 | 650 | SQ.M |
| 72 | 72 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (Two Coat)3rd floor \nNormal Acrylic Emulsion | BI01010001010000000000000515BI0100001183 | 300 | SQ.M |
| 73 | 73 | Primming One coat on Timber or Plaster surface with Synthetic Oil bound Primer of approved Quality inclusing smooting surface by sand Papering etc | BI01010001010000000000000515BI0100001184 | 1900 | SQ.M |
| 74 | 74 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) | BI01010001010000000000000515BI0100001185 | 1900 | SQ.M |
| 75 | 75 | (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001186 | 3000 | SQ.M |
| 76 | 76 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessaryb) iv) On Steel and other Metal Surface Two coat with any shade except white | BI01010001010000000000000515BI0100001187 | 3000 | SQ.M |
| 77 | 77 | Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) \n= 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water\nand polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all\nother incidental charges complete as per direction of Engineerin-Charge. (Note: This work should not be executed without\nspecific permission of Superintending Engineer)ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5\nmm thick) GROUND FLOOR | BI01010001010000000000000515BI0100001188 | 240 | SQ.M |
| 78 | 78 | Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) \n= 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course and joints grouted with admixture of white epoxy grout materials of approved brand including spacer -2mm as directed and removal of wax coating of top surface of tiles with warm water\nand polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all\nother incidental charges complete as per direction of Engineerin-Charge. (Note: This work should not be executed without\nspecific permission of Superintending Engineer)ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5\nmm thick)1ST FLOOR | BI01010001010000000000000515BI0100001189 | 320 | SQ.M |
| 79 | 79 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick\nwith uniform texture & without decorative veins in columns,\nwall, facia etc. with 15 mm thick [avg] cement mortar (1:2)\nincluding making suitable arrangements to hold the stones\nproperly by brass / copper hooks including pointing in cement\nmortar (1:2) (1 white cement : 2 marble dust) with admixture\nof pigment matching the stone shades all complete as per\ndirection of the Engineer-in-charge including cost of all\nmaterials, labours, scaffolding, staging ,curing and\nroughening of concrete surface complete. Area of each\nGranite slab > 0.6 upto 1.0 square metre.\n[Using cement slurry at back side of granite @ 4.4 kg/sq.m &\nwhite cement slurry for joint filling @ 1.8 kg/sq.m]GROUND FLOOR | BI01010001010000000000000515BI0100001190 | 65 | SQ.M |
| 80 | 80 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick\nwith uniform texture & without decorative veins in columns,\nwall, facia etc. with 15 mm thick [avg] cement mortar (1:2)\nincluding making suitable arrangements to hold the stones\nproperly by brass / copper hooks including pointing in cement\nmortar (1:2) (1 white cement : 2 marble dust) with admixture\nof pigment matching the stone shades all complete as per\ndirection of the Engineer-in-charge including cost of all\nmaterials, labours, scaffolding, staging ,curing and\nroughening of concrete surface complete. Area of each\nGranite slab > 0.6 upto 1.0 square metre.\n[Using cement slurry at back side of granite @ 4.4 kg/sq.m &\nwhite cement slurry for joint filling @ 1.8 kg/sq.m]1ST FLOOR | BI01010001010000000000000515BI0100001191 | 110 | SQ.M |
| 81 | 81 | Providing and fixing of false ceiling with powder coated exposed G.I. grid\nsuspension system (E-Grid U-1520 or equivalent load carrying capacity with mid\nspan deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c )\nconsisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and\nWall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the\nperimeter of the wall by steel screws with distance 300mm c/c. The Main Runners\nto be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut\nslots of Main Runner at a regular interval of 600 mm to form a modular grid of\n1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed\nperpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X\n600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia\nG.I. wire from purlins / soffit. 15mm thick OW Acoustic Board (Mineral Fiber\nAcoustic Ceiling Tiles) of approved patern and size 595mm X 595mm with NRC\nvalue > 0.65 should be placed in the Grid module to form a False Ceiling. All\ncomplete as per the drawing & directions of Engineer-in-charge.\nIn ground floor.\na) Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U1520) | BI01010001010000000000000515BI0100001192 | 185 | SQ.M |
| 82 | 82 | 18 mm. to 22 mm. thick, kota stone slab setting 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigmentmatching the stone shade, including grinding& polishing as per direction of Engineer - in -charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m andpointing @2.0 kg/Sq.m] Extra cost of labour for prefinished and premoulded Nosing to treads of steps,GROUND FLOOR | BI01010001010000000000000515BI0100001193 | 2200 | SQ.M |
| 83 | 83 | 18 mm. to 22 mm. thick, kota stone slab setting 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigmentmatching the stone shade, including grinding& polishing as per direction of Engineer - in -charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m andpointing @2.0 kg/Sq.m] Extra cost of labour for prefinished and premoulded Nosing to treads of steps,1ST FLOOR | BI01010001010000000000000515BI0100001194 | 1700 | SQ.M |
| 84 | 84 | 18 mm. to 22 mm. thick, kota stone slab setting 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigmentmatching the stone shade, including grinding& polishing as per direction of Engineer - in -charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m andpointing @2.0 kg/Sq.m] Extra cost of labour for prefinished and premoulded Nosing to treads of steps,2nd floor | BI01010001010000000000000515BI0100001195 | 500 | SQ.M |
| 85 | 85 | 18 mm. to 22 mm. thick, kota stone slab setting 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigmentmatching the stone shade, including grinding& polishing as per direction of Engineer - in -charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m andpointing @2.0 kg/Sq.m] Extra cost of labour for prefinished and premoulded Nosing to treads of steps,3rd floor | BI01010001010000000000000515BI0100001196 | 12 | SQ.M |
| 86 | 86 | Extra cost of labour for prefinished & premoulded nosing to trades of steps,railing,window sill etc of kota stone | BI01010001010000000000000515BI0100001197 | 2600 | Mtr |
| 87 | 87 | Extra cost of labour for grinding kota stone floor in trades & riser of steps | BI01010001010000000000000515BI0100001198 | 400 | SQ.M |
| 88 | 88 | Supplying, fitting and fixing 18 mm. to 22mm. thick kota stone slab in wall, dado in 15mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold thestone properly by brass / copper hooksincluding pointing in cement mortar (1:2) (1cement : 2 marble dust) with admixture of pigments matching the stone shadeincluding grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]GROUND FLOOR | BI01010001010000000000000515BI0100001199 | 300 | SQ.M |
| 89 | 89 | Supplying, fitting and fixing 18 mm. to 22mm. thick kota stone slab in wall, dado in 15mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold thestone properly by brass / copper hooksincluding pointing in cement mortar (1:2) (1cement : 2 marble dust) with admixture of pigments matching the stone shadeincluding grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]1ST FLOOR | BI01010001010000000000000515BI0100001200 | 220 | SQ.M |
| 90 | 90 | Supplying, fitting and fixing 18 mm. to 22mm. thick kota stone slab in wall, dado in 15mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold thestone properly by brass / copper hooksincluding pointing in cement mortar (1:2) (1cement : 2 marble dust) with admixture of pigments matching the stone shadeincluding grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]2nd floor | BI01010001010000000000000515BI0100001201 | 65 | SQ.M |
| 91 | 91 | Supplying, fitting and fixing 18 mm. to 22mm. thick kota stone slab in wall, dado in 15mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold thestone properly by brass / copper hooksincluding pointing in cement mortar (1:2) (1cement : 2 marble dust) with admixture of pigments matching the stone shadeincluding grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]3rd floor | BI01010001010000000000000515BI0100001202 | 2 | SQ.M |
| 92 | 92 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative FLOORGROUND FLOOR | BI01010001010000000000000515BI0100001203 | 250 | SQ.M |
| 93 | 93 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative FLOOR1ST FLOOR | BI01010001010000000000000515BI0100001204 | 150 | SQ.M |
| 94 | 94 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative FLOOR2nd floor | BI01010001010000000000000515BI0100001205 | 25 | SQ.M |
| 95 | 95 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor With Sand Cement Mortar (1:3) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative WALLGROUND FLOOR | BI01010001010000000000000515BI0100001206 | 1000 | SQ.M |
| 96 | 96 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor With Sand Cement Mortar (1:3) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative WALL1ST FLOOR | BI01010001010000000000000515BI0100001207 | 500 | SQ.M |
| 97 | 97 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor With Sand Cement Mortar (1:3) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative WALL2nd floor | BI01010001010000000000000515BI0100001208 | 50 | SQ.M |
| 98 | 98 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile above 0.09 Sq.m (i) Coloured decorative FLOORGROUND FLOOR | BI01010001010000000000000515BI0100001209 | 25 | SQ.M |
| 99 | 99 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile above 0.09 Sq.m (i) Coloured decorative FLOOR1ST FLOOR | BI01010001010000000000000515BI0100001210 | 30 | SQ.M |
| 100 | 100 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor With Sand Cement Mortar (1:3) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile above 0.09 Sq.m (i) Coloured decorative WALLGROUND FLOOR | BI01010001010000000000000515BI0100001211 | 80 | SQ.M |
| 101 | 101 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor With Sand Cement Mortar (1:3) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile above 0.09 Sq.m (i) Coloured decorative WALL1ST FLOOR | BI01010001010000000000000515BI0100001212 | 50 | SQ.M |
| 102 | 102 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (ii) 35 mm. thickGROUND FLOOR | BI01010001010000000000000515BI0100001213 | 100 | SQ.M |
| 103 | 103 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (ii) 35 mm. thick1ST FLOOR | BI01010001010000000000000515BI0100001214 | 50 | SQ.M |
| 104 | 104 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (ii) 35 mm. thick2nd floor | BI01010001010000000000000515BI0100001215 | 50 | SQ.M |
| 105 | 105 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (ii) 35 mm. thick3rd floor | BI01010001010000000000000515BI0100001216 | 50 | SQ.M |
| 106 | 106 | Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor.Slab Thickness above 25 mm and upto 37.5 mmGROUND FLOOR | BI01010001010000000000000515BI0100001217 | 20 | SQ.M |
| 107 | 107 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria. (ii) 66mm x 90mm | BI01010001010000000000000515BI0100001218 | 350 | Mtr |
| 108 | 108 | Supplying fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of department of science and technology (DST) to satisfy IS:4020 door testing performance criteria 32 mm thk | BI01010001010000000000000515BI0100001219 | 105 | Sqmt |
| 109 | 109 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc,including hoisting in position, straightening if required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. In Ground floor Flash butt welded windows and ventilators (No shop priming will be allowed to facilitate.\nOpenable steel windows as per IS sizes with side hung shutters and horizotal glazing bars with/without fixed type ventilators.[The extra rate admissible for the openable portion only]. GROUND FLOOR | BI01010001010000000000000515BI0100001220 | 270 | SQ.M |
| 110 | 110 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc,including hoisting in position, straightening if required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. In Ground floor Flash butt welded windows and ventilators (No shop priming will be allowed to facilitate.Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars with/without fixed type ventilators.[The extra rate admissible for the openable portion only].1ST FLOOR | BI01010001010000000000000515BI0100001221 | 115 | SQ.M |
| 111 | 111 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc,including hoisting in position, straightening if required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. In Ground floor Flash butt welded windows and ventilators (No shop priming will be allowed to facilitate.Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars with/without fixed type ventilators.[The extra rate admissible for the openable portion only].2nd floor | BI01010001010000000000000515BI0100001222 | 35 | SQ.M |
| 112 | 112 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc,including hoisting in position, straightening if required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. In Ground floor Flash butt welded windows and ventilators (No shop priming will be allowed to facilitate.Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars with/without fixed type ventilators.[The extra rate admissible for the openable portion only].3rd floor | BI01010001010000000000000515BI0100001223 | 2 | SQ.M |
| 113 | 113 | Fixed type steel windows as per IS Sizes with horizontal glazing barsGROUND FLOOR | BI01010001010000000000000515BI0100001224 | 25 | SQ.M |
| 114 | 114 | Fixed type steel windows as per IS Sizes with horizontal glazing bars1st FLOOR | BI01010001010000000000000515BI0100001225 | 10 | SQ.M |
| 115 | 115 | Fixed type steel windows as per IS Sizes with horizontal glazing bars2nd FLOOR | BI01010001010000000000000515BI0100001226 | 2 | SQ.M |
| 116 | 116 | Fixed type steel windows as per IS Sizes with horizontal glazing bars3rd FlOOR | BI01010001010000000000000515BI0100001227 | 2 | SQ.M |
| 117 | 117 | Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three ) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-incharge.\n\nWeight of Strainless Steel railing per metre 6.5 Kg (approx) | BI01010001010000000000000515BI0100001228 | 60 | SQ.M |
| 118 | 118 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately).\n(a) 40mm X 6mm, 250mm Length | BI01010001010000000000000515BI0100001229 | 2000 | Each |
| 119 | 119 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) ii) 4 mm thick | BI01010001010000000000000515BI0100001230 | 500 | SQ.M |
| 120 | 120 | Extra for fixing glass panes in steel window | BI01010001010000000000000515BI0100001231 | 500 | SQ.M |
| 121 | 121 | Supplying bubble free float glass of approved make and brand\nconforming to IS: 2835-1987; \n(A) clear, toughened glass conforming to IS: 2553-1992 (part-II) 10mm thick | BI01010001010000000000000515BI0100001232 | 10 | SQ.M |
| 122 | 122 | Two point nose aluminium handle including fitting and fixing. | BI01010001010000000000000515BI0100001233 | 350 | Each |
| 123 | 123 | steel peg stay 300 mm long including fitting and fixing. | BI01010001010000000000000515BI0100001234 | 1000 | Each |
| 124 | 124 | Supplying anodised aluminium catch hook with eye fitted and fixed to shutter and\nchowkat complete of best quality:\n(i) 225mm long. | BI01010001010000000000000515BI0100001235 | 1000 | Each |
| 125 | 125 | (a) Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete. | BI01010001010000000000000515BI0100001236 | 5 | SQ.M |
| 126 | 126 | a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S,W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 16 Kg./sq. mtr.GROUND FLOOR | BI01010001010000000000000515BI0100001237 | 300 | Qntl |
| 127 | 127 | a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S,W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 16 Kg./sq. mtr.1ST FLOOR | BI01010001010000000000000515BI0100001238 | 200 | Qntl |
| 128 | 128 | a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S,W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 16 Kg./sq. mtr.2nd floor | BI01010001010000000000000515BI0100001239 | 60 | Qntl |
| 129 | 129 | Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted\nand fixed complete as per design (excluding the supporting framework but\nincluding local sal wood battens of size 37.5mmx25mm).\n (c) 37.5mm mesh | BI01010001010000000000000515BI0100001240 | 200 | SQ.M |
| 130 | 130 | M.S. works in framed gratings of window etc.made of round or\nsquare bars and frame work or M.S. flats (with the bars securely\nfixed to the flat bar frame) with or without intermediate flat bar\nstiffener and fixed with necessary screws etc. complete, as directed. | BI01010001010000000000000515BI0100001241 | 10 | Qntl |
| 131 | 131 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. IN GROUND FLOOR | BI01010001010000000000000515BI0100001242 | 81 | SQ.M |
| 132 | 132 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark 100mm X 50mm X 1.25mm | BI01010001010000000000000515BI0100001243 | 2050 | Each |
| 133 | 133 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.250mm long | BI01010001010000000000000515BI0100001244 | 200 | Each |
| 134 | 134 | Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with\n16mm dia rod with centre bolt and round fitting..250mm long | BI01010001010000000000000515BI0100001245 | 20 | Each |
| 135 | 135 | (ii) Anodised aluminium floor door stopper | BI01010001010000000000000515BI0100001246 | 200 | Each |
| 136 | 136 | Godrej Hydraulic door closer fitted and fixed complete.Medium Type | BI01010001010000000000000515BI0100001247 | 150 | Each |
| 137 | 137 | Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including\nfitting & fixing complete. | BI01010001010000000000000515BI0100001248 | 20 | Each |
| 138 | 138 | Iron door ring of approved quality fitted and fixed with nut and washer\ncomplete. 50mm dia. | BI01010001010000000000000515BI0100001249 | 1000 | Each |
| 139 | 139 | Anodised aluminium barrel / tower /socket bolt (full covered) of approved manufractured from extructed section conforming to I.S. 204/74 fitted with cadmium plated screws. 300 mm long X 12mm dia bolt. | BI01010001010000000000000515BI0100001250 | 1050 | Each |
| 140 | 140 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:(a) With continuous plate base (Hexagonal / Round rod) (v) 125 mm grip x 12 mm dia rod. | BI01010001010000000000000515BI0100001251 | 1050 | Each |
| 141 | 141 | Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having\nadhesive & waterproofing properties by mixing in proportion (1 liquid: 4\ncementitious material) or as per manufacturer's specification for water\nproofing layer in water tank etc. (No Departmental Cement is required) | BI01010001010000000000000515BI0100001252 | 2200 | SQ.M |
| 142 | 142 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (10 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.\nPakur VarietyGround Floor | BI01010001010000000000000515BI0100001253 | 15 | Cum |
| 143 | 143 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (10 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.\nPakur VarietyFirst Floor | BI01010001010000000000000515BI0100001254 | 40 | Cum |
| 144 | 144 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (10 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.\nPakur VarietySecond Floor | BI01010001010000000000000515BI0100001255 | 45 | Cum |
| 145 | 145 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (10 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.\nPakur VarietyThird Floor | BI01010001010000000000000515BI0100001256 | 2 | Cum |
| 146 | 146 | Supplying dividing strip fitted and fixed with cement mortar\n(1:3) in mosaic or patent stone floor, dado etc. complete as per direction of the Engineer-in-charge. (i) Glass - 3mm. Thick 25 mm. wide strip | BI01010001010000000000000515BI0100001257 | 1000 | mtr |
| 147 | 147 | Supplying, fitting and fixing cast iron heavy type spiral staircase of approved design with 50 mm.dia. Stem and C.I. Steps 150 mm as per design 900 mm. high C.I, railing including necessary M.S. tie of suitable section embedded to wall with cement concrete (1:2:4) including cost of intermediate C.I. platform secured with necessary tie to stem and wall with cement concrete (1:2:4) including fixing the stem in ground with cement concrete (1:3:6) complete in all respect with all labour and materials. (Payment to be made on vertical height in between 1st step and top platform.) (b) With 1200 mm.dia. well | BI01010001010000000000000515BI0100001258 | 7 | mtr |
| 148 | 148 | M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.GROUND FLOOR | BI01010001010000000000000515BI0100001259 | 50 | Qntl |
| 149 | 149 | M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.1ST FLOOR | BI01010001010000000000000515BI0100001260 | 40 | Qntl |
| 150 | 150 | M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.2nd floor | BI01010001010000000000000515BI0100001261 | 15 | Qntl |
| 151 | 151 | Locking arrangement for Jail type doors including supplying fitting and fixing in position complete as per approved design.GROUND FLOOR | BI01010001010000000000000515BI0100001262 | 310 | Kg |
| 152 | 152 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make andbrand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.I) For structural members of specified sections weighing less than 22.5 Kg./m | BI01010001010000000000000515BI0100001263 | 0.5 | MT |
| 153 | 153 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. | BI01010001010000000000000515BI0100001264 | 350 | SQ.M |
| 154 | 154 | Welding in M.S. structural work with gas or electric: continuous weld | BI01010001010000000000000515BI0100001265 | 50 | cm run |
| 155 | 155 | Supplying, fitting, fixing in position rails on any surface. | BI01010001010000000000000515BI0100001266 | 25 | Kg |
| 156 | 156 | M.S. structural works in roof trusses with tubular sections\nconforming to IS: 806-1957 & IS: 1161- 1958 connected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1956 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc.\nPayment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work.Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.\nFor trusses spanning up to 12.00 m\nAt roof truss In ground floor | BI01010001010000000000000515BI0100001267 | 0.5 | Kg |
| 157 | 157 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). With 0.5 mm thick sheet | BI01010001010000000000000515BI0100001268 | 50 | SQ.M |
| 158 | 158 | Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifable concentrates (1% concentration) with water by weight at the rate of 5 litres /sqm.of the surface before sand bed or subgrade is laid. Holes upto 50 mm to 75 mm deep at 150 mm centre to centre both ways shall be made with 12 mm diameter mild steel rod on the surface to facilitate saturation of the soil with chemical emulsion. The work shall be carried out as per specification described in para 6.4 of code IS-6313 (part -II) 1981. (Mode of measurement will be per sq.m. of plan area of plinth treated. | BI01010001010000000000000515BI0100001269 | 2200 | Sqmt |
| 159 | 159 | Supplying and fixing grasses tiles of grass Maxican Carpet/Selection No. 1 Healthy & fresh grasses (size 1'x1' or bigger) including watering and maintenance of the lawn for\n30 days or more till the grass forms a thick lawn free from wees and fit for mowing including supplying good earth as required by Engineer-in-charge. (Rate includes supply of labour, tools & plants including materials) | BI01010001010000000000000515BI0100001270 | 1600 | Sqmt |
| 160 | 160 | Planting of trees ( Avenue plants) in 0.60m dia holea, 1m\ndeep dug in the ground, mixing the soil with decayed farm\nyard/sludge manure. This includes supply of labour, tools &\nplants including materials but excluding cost of tree. | BI01010001010000000000000515BI0100001271 | 1000 | Each |
| 161 | 161 | Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary. (a) Depth up to 150mm. | BI01010001010000000000000515BI0100001272 | 1200 | Sqmt |
| 162 | 162 | (b) For each additional Depth of 150mm and part \nthereof. | BI01010001010000000000000515BI0100001273 | 1200 | Sqmt |
| 163 | 163 | Granular Sub-base with Graded Material, (Table:- 400-1):- Mix in place Method: Construction of granular sub-base by providing graded material, mixing in Wet Mix Plant at OMC, carriage of mixed material to work site, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory power roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants and cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MORT&H (5th Revision). Grading - G.S.B. | BI01010001010000000000000515BI0100001274 | 300 | CUM |
| 164 | 164 | Wet Mix Macadam Base Course\nProviding, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including screening of aggregates and \ngranular materials, premixing the material with water at OMC in Wet Mix Plant, carriage of mixed material \nby tipper to site, laying in uniform layers with Paver in Sub- base / Base course on well prepared surface and compacting with Vibratory Roller to achieve the desired density, including supply of all materials, machinery, fuel and lubricants, including incidental \ncosts for lighting, guarding, barricading, making earthen bundh to protect the edges including cost of quality control complete as per Clause 406 of \nSpecifications for Road & Bridge Works of MoRT&H \n(5th Revision). | BI01010001010000000000000515BI0100001275 | 180 | CUM |
| 165 | 165 | Providing and filling joint sealing compound as per drawing and technical specifications with coarse sand and 6% bitumen by weight | BI01010001010000000000000515BI0100001276 | 500 | RM |
| 166 | 166 | Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).\n(i) For WBM / WMM Surface:\n(with primer @ 0.85 kg/sqm) | BI01010001010000000000000515BI0100001277 | 1200 | Sqmt |
| 167 | 167 | Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD | BI01010001010000000000000515BI0100001278 | 1200 | Sqmt |
| 168 | 168 | Seal Coat (Type-B) :- Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MORT&H (5th Revision). \nBy Mechanical Means. With Hot Bitumen Binder (@ 6.80 kg / 10 sqm.) On freshly laid premixed carpet with out tack coat. | BI01010001010000000000000515BI0100001279 | 1200 | Sqmt |
| 169 | 169 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992\n(A) (i) Single Socketed 3 Meter Length110 mm | BI01010001010000000000000515BI0100001280 | 500 | Mtr |
| 170 | 170 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992\n(A) (i) Single Socketed 3 Meter Length160 mm | BI01010001010000000000000515BI0100001281 | 500 | Mtr |
| 171 | 171 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992\n(A) (i) Double Socketed 3 Meter Length110 mm | BI01010001010000000000000515BI0100001282 | 500 | Mtr |
| 172 | 172 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992\n(A) (i) Double Socketed 3 Meter Length160 mm | BI01010001010000000000000515BI0100001283 | 500 | Mtr |
| 173 | 173 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made(a) For Exposed Work -- PVC Pipes (Dia)\n50 mm(Main Riser) | BI01010001010000000000000515BI0100001284 | 400 | Mtr |
| 174 | 174 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made(a) For Exposed Work -- PVC Pipes (Dia)40 mm(Main Riser) | BI01010001010000000000000515BI0100001285 | 250 | Mtr |
| 175 | 175 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made(a) For Exposed Work -- PVC Pipes (Dia)32mm | BI01010001010000000000000515BI0100001286 | 250 | Mtr |
| 176 | 176 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made(a) For Exposed Work -- PVC Pipes (Dia)20 mm | BI01010001010000000000000515BI0100001287 | 600 | Mtr |
| 177 | 177 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made(a) For Exposed Work -- PVC Pipes (Dia)25 mm | BI01010001010000000000000515BI0100001288 | 450 | Mtr |
| 178 | 178 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made(a) For Concealed work 20 mm | BI01010001010000000000000515BI0100001289 | 350 | Mtr |
| 179 | 179 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made(a) For Concealed work15 mm | BI01010001010000000000000515BI0100001290 | 600 | Mtr |
| 180 | 180 | Supplying & laying Double Wall Corrugated (with external annular\ncorrugation and smooth internal walls) High Density Polyethelene Pipes\nconforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with\nRing Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIR\nvalue not more than 10% including necessary jointing materials for nonpressure underground Drainage, Sewerage & Cross drainage application. 150mm internal dia. | BI01010001010000000000000515BI0100001291 | 300 | Mtr |
| 181 | 181 | Supplying & laying Double Wall Corrugated (with external annular\ncorrugation and smooth internal walls) High Density Polyethelene Pipes\nconforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with\nRing Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIR\nvalue not more than 10% including necessary jointing materials for nonpressure underground Drainage, Sewerage & Cross drainage application. 300mm internal dia. | BI01010001010000000000000515BI0100001292 | 200 | Mtr |
| 182 | 182 | Supplying & laying Double Wall Corrugated (with external annular\ncorrugation and smooth internal walls) High Density Polyethelene Pipes\nconforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with\nRing Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIR\nvalue not more than 10% including necessary jointing materials for nonpressure underground Drainage, Sewerage & Cross drainage application. 400mm internal dia | BI01010001010000000000000515BI0100001293 | 150 | Mtr |
| 183 | 183 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).50mm | BI01010001010000000000000515BI0100001294 | 30 | Each |
| 184 | 184 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).40mm | BI01010001010000000000000515BI0100001295 | 30 | Each |
| 185 | 185 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).32mm | BI01010001010000000000000515BI0100001296 | 30 | Each |
| 186 | 186 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).25 mm | BI01010001010000000000000515BI0100001297 | 30 | Each |
| 187 | 187 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).20 mm | BI01010001010000000000000515BI0100001298 | 30 | Each |
| 188 | 188 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes \n& fittings conforming to IS-15778: 2007 Ball Valve50mm | BI01010001010000000000000515BI0100001299 | 30 | Each |
| 189 | 189 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes \n& fittings conforming to IS-15778: 2007 Ball Valve40mm | BI01010001010000000000000515BI0100001300 | 30 | Each |
| 190 | 190 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes \n& fittings conforming to IS-15778: 2007 Ball Valve32mm | BI01010001010000000000000515BI0100001301 | 30 | Each |
| 191 | 191 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes \n& fittings conforming to IS-15778: 2007 Ball Valve25 mm | BI01010001010000000000000515BI0100001302 | 30 | Each |
| 192 | 192 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes \n& fittings conforming to IS-15778: 2007 Ball Valve20 mm | BI01010001010000000000000515BI0100001303 | 30 | Each |
| 193 | 193 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. Hindware/Parryware/Cera, made (a) With 'P' trap (With Vent) | BI01010001010000000000000515BI0100001304 | 30 | Each |
| 194 | 194 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (i) 580 mm X 440 mm | BI01010001010000000000000515BI0100001305 | 70 | Each |
| 195 | 195 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(a) With 'P' trap | BI01010001010000000000000515BI0100001306 | 20 | Each |
| 196 | 196 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P.hinges, rubber buffer and brass screws complete.\n(b) Anglo Indian (ii) Plastic (hallow type) white | BI01010001010000000000000515BI0100001307 | 50 | Each |
| 197 | 197 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. | BI01010001010000000000000515BI0100001308 | 120 | Each |
| 198 | 198 | Supplying, fitting and fixing Squating plate with integral flushing in white\nvitreous chinaware of approved make in cement concrete (6:3:1) with\njhama chips complete. (Payment of concrete will be paid seperately).\n(i) 450 mm X 350 mm | BI01010001010000000000000515BI0100001309 | 120 | Each |
| 199 | 199 | Supplying, fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with coupling at one end fitted with necessary clamps. 1050 mm long | BI01010001010000000000000515BI0100001310 | 150 | Each |
| 200 | 200 | Supplying, fitting and fixing vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 32 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size | BI01010001010000000000000515BI0100001311 | 50 | Each |
| 201 | 201 | Supplying, fitting and fixing pedestal of approved make for wash basin (white) | BI01010001010000000000000515BI0100001312 | 50 | Each |
| 202 | 202 | Supplying, fitting and fixing towel rail with two brackets. (a) C.P. over brass 25 mm dia. and 600 mm long | BI01010001010000000000000515BI0100001313 | 120 | Each |
| 203 | 203 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm | BI01010001010000000000000515BI0100001314 | 80 | Each |
| 204 | 204 | Supplying, fitting and fixing glass shelf with aluminium guard rails.\n(a) Ordinary type with 5.5 mm sheet glass (ii) 600 mm X 125 mm | BI01010001010000000000000515BI0100001315 | 80 | Each |
| 205 | 205 | Supplying ,fitting and fixing bib cock or stop cock.(e) PTMT (Polytetra methylene terephthalate)StopCock (Prayag or Equivalent) 15 mm | BI01010001010000000000000515BI0100001316 | 100 | Each |
| 206 | 206 | PTMT Pillar Cock - 15 mm. (Prayag or equivalent) | BI01010001010000000000000515BI0100001317 | 100 | Each |
| 207 | 207 | (a) (i) Chromium plated Bib Cock long body with wall flange with aerator\n(Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of\nESSCO or similar brand) | BI01010001010000000000000515BI0100001318 | 30 | Each |
| 208 | 208 | (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar). | BI01010001010000000000000515BI0100001319 | 30 | Each |
| 209 | 209 | CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model -\nTropical / Sumthing Special of ESSCO or similar brand). | BI01010001010000000000000515BI0100001320 | 30 | Each |
| 210 | 210 | (ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar\nbrand). | BI01010001010000000000000515BI0100001321 | 30 | Each |
| 211 | 211 | CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code\nNo.5041 & Model - FLORENTINE of JAQUAR or similar brand) | BI01010001010000000000000515BI0100001322 | 30 | Each |
| 212 | 212 | g) CP Sink Cock with Regular Swinging Spout (Table Mounted Model)\n(Equivalent to Code No. 5357 of JAQUAR or similar brand). | BI01010001010000000000000515BI0100001323 | 10 | Each |
| 213 | 213 | Supplying, fitting and fixing shower of approved brand and make.(a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). | BI01010001010000000000000515BI0100001324 | 20 | Each |
| 214 | 214 | Chromium plated shower arm 240 mm long (Equivalent to Code No.\n536(A) & Model - Tropical / Sumthing Special of ESSCO or similar\nbrand). | BI01010001010000000000000515BI0100001325 | 20 | Each |
| 215 | 215 | Chromium plated Hand shower 70mm dia Round Shape Single flow\nwith Flexible Tube & fittings(Equivalent to Code No. ESH-5512 & Model -\nTropical / Sumthing Special of ESSCO or similar). | BI01010001010000000000000515BI0100001326 | 20 | Each |
| 216 | 216 | Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall\nHook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or\nsimilar). | BI01010001010000000000000515BI0100001327 | 20 | Each |
| 217 | 217 | Supplying, fitting and fixing shower of approved brand and make\nc) PTMT overhead shower (Prayag or equivalent)\n(i) 150 mm round | BI01010001010000000000000515BI0100001328 | 50 | Each |
| 218 | 218 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) Fittings(i) Door Tee (110 mm) | BI01010001010000000000000515BI0100001329 | 100 | Each |
| 219 | 219 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) Fittings(i)Plain Tee (110 mm) | BI01010001010000000000000515BI0100001330 | 100 | Each |
| 220 | 220 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) Fittings(i)Plain Tee (160 mm) | BI01010001010000000000000515BI0100001331 | 100 | Each |
| 221 | 221 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) Fittings(ii)Bend 87.5 dig.(110 MM) | BI01010001010000000000000515BI0100001332 | 100 | Each |
| 222 | 222 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) Fittings(ii)Bend 87.5 dig.(160 MM) | BI01010001010000000000000515BI0100001333 | 100 | Each |
| 223 | 223 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) Fittings(iii) Door Bend (T.S)110 mm | BI01010001010000000000000515BI0100001334 | 100 | Each |
| 224 | 224 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) Fittings(iii) Door Bend (T.S)160 mm | BI01010001010000000000000515BI0100001335 | 100 | Each |
| 225 | 225 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) Fittings(iv) Vent Cowl 110 mm | BI01010001010000000000000515BI0100001336 | 150 | Each |
| 226 | 226 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) FittingsPipe Clip 110 mm | BI01010001010000000000000515BI0100001337 | 1000 | Each |
| 227 | 227 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) FittingsPipe Clip 160 mm | BI01010001010000000000000515BI0100001338 | 500 | Each |
| 228 | 228 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) FittingsDouble Y (110 mm) | BI01010001010000000000000515BI0100001339 | 50 | Each |
| 229 | 229 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) FittingsPlain Y(110 mm) | BI01010001010000000000000515BI0100001340 | 50 | Each |
| 230 | 230 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) FittingsPlain Y(160 mm) | BI01010001010000000000000515BI0100001341 | 50 | Each |
| 231 | 231 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) Fittings(i)Door Tee (160 mm) | BI01010001010000000000000515BI0100001342 | 100 | Each |
| 232 | 232 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) Fittings(ii)Bend 45 dig.(110 MM) | BI01010001010000000000000515BI0100001343 | 100 | Each |
| 233 | 233 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992(B) Fittings(ii)Bend 45 dig.(160 MM) | BI01010001010000000000000515BI0100001344 | 100 | Each |
| 234 | 234 | Labour for fitting and fixing U.P.V.C pipes for above ground work including cost of joining materials etc. fitting and fixing all necessary specials, cutting pipes,cutting holes in walls or R.C floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 mtr. and refilling the same complete as per direction of the Engineer - in - Charge.(payment will be made on centre line measurment of the total pipe line including specials) (A) Above ground (i) 110 mm | BI01010001010000000000000515BI0100001345 | 200 | Mtr |
| 235 | 235 | Labour for fitting and fixing U.P.V.C piupes for above ground work including cost of joining materials etc. fitting and fixing all necessary specials, cutting pipes,cutting holes in walls or R.C floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 mtr. and refilling the same complete as per direction of the Engineer - in - Charge.(payment will be made on centre line measurment of the total pipe line including specials) (A) Above ground(i) 160 mm | BI01010001010000000000000515BI0100001346 | 200 | Mtr |
| 236 | 236 | Labour for fitting and fixing U.P.V.C piupes for above ground work including cost of joining materials etc. fitting and fixing all necessary specials, cutting pipes,cutting holes in walls or R.C floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 mtr. and refilling the same complete as per direction of the Engineer - in - Charge.(payment will be made on centre line measurment of the total pipe line including specials) (A) Under ground (i) 110 mm | BI01010001010000000000000515BI0100001347 | 300 | Mtr |
| 237 | 237 | Labour for fitting and fixing U.P.V.C piupes for above ground work including cost of joining materials etc. fitting and fixing all necessary specials, cutting pipes,cutting holes in walls or R.C floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 mtr. and refilling the same complete as per direction of the Engineer - in - Charge.(payment will be made on centre line measurment of the total pipe line including specials) (A) Under ground(i) 160 mm | BI01010001010000000000000515BI0100001348 | 300 | Mtr |
| 238 | 238 | Supplying, fitting and fixing C.I. round grating.(ii) 100 mm | BI01010001010000000000000515BI0100001349 | 100 | Each |
| 239 | 239 | Supplying, fitting and fixing C.I. round grating.(ii) 150 mm | BI01010001010000000000000515BI0100001350 | 100 | Each |
| 240 | 240 | Supplying, fitting and fixing C.I. square jalli.(ii) 100 mm | BI01010001010000000000000515BI0100001351 | 100 | Each |
| 241 | 241 | Supplying, fitting and fixing C.I. square jalli.(ii) 150 mm | BI01010001010000000000000515BI0100001352 | 100 | Each |
| 242 | 242 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (c) 2000 litre capacity | BI01010001010000000000000515BI0100001353 | 20 | Each |
| 243 | 243 | Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity.\n(a) Upto 1st story from G.L. | BI01010001010000000000000515BI0100001354 | 10 | Each |
| 244 | 244 | Labour for hoisting plastic water storage tank. (ii) Above 1500 litre upto 5000 litre capacity.\n(a) Upto 2nd story from G.L. | BI01010001010000000000000515BI0100001355 | 10 | Each |
| 245 | 245 | Labour for punching hole in plastic water storage tank upto 50 mm dia. | BI01010001010000000000000515BI0100001356 | 100 | Each |
| 246 | 246 | Supplying fitting fixing PTMT smart shelf of approved make of size 300 mm | BI01010001010000000000000515BI0100001357 | 100 | Each |
| 247 | 247 | Suppling fitting fixing soap holder a)PTMT (Prayag or Equivelent) | BI01010001010000000000000515BI0100001358 | 100 | Each |
| 248 | 248 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.(i) 530 mm X 430 mm x 180 mm | BI01010001010000000000000515BI0100001359 | 5 | Each |
| 249 | 249 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(i) 590 mm X 390 mm X 380 mm | BI01010001010000000000000515BI0100001360 | 10 | Each |
| 250 | 250 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.\ni) With Pakur variety. (SAIL/TATA/RINL) | BI01010001010000000000000515BI0100001361 | 60 | Each |
| 251 | 251 | 5 MT load bearing capacity gully pit cover with frame and hinge arrangement for opening of size Cover: 470 mm X 420 mm X 80 mm Frame: 590 mm X 550 mm X 170 mm opening: 380mm x 305mm\nWeight: 100 kg (approx) | BI01010001010000000000000515BI0100001362 | 60 | Each |
| 252 | 252 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. \nPakur varity. (SAIL/TATA/RINL) For 10 users | BI01010001010000000000000515BI0100001363 | 5 | Each |
| 253 | 253 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. \nPakur varity. (SAIL/TATA/RINL) For 20 users | BI01010001010000000000000515BI0100001364 | 5 | Each |
| 254 | 254 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. \nPakur varity. (SAIL/TATA/RINL) For 30 users | BI01010001010000000000000515BI0100001365 | 5 | Each |
| 255 | 255 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. \nPakur varity. (SAIL/TATA/RINL) For 50 users | BI01010001010000000000000515BI0100001366 | 5 | Each |
| 256 | 256 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. \nPakur varity. (SAIL/TATA/RINL) For 100 users | BI01010001010000000000000515BI0100001367 | 2 | Each |
| 257 | 257 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. \nPakur varity. (SAIL/TATA/RINL) For 200 users | BI01010001010000000000000515BI0100001368 | 1 | Each |
| 258 | 258 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (6:1) and 1.00m inside dia. (SAIL/TATA/RINL) | BI01010001010000000000000515BI0100001369 | 20 | Each |
| 259 | 259 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 900 mm long | BI01010001010000000000000515BI0100001370 | 120 | Each |
| 260 | 260 | Labour for boring through any type of soil for sinking tube well of required dia. with top enlargement by Rig boring system (either by reverse circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete.\n(a) For depth upto 250 metre for 100 mm dia. tube well with top enlargement of 200 mm dia.\n(i) First 50 mtr (For 4nos Boring)\n | BI01010001010000000000000515BI0100001371 | 200 | Mtr |
| 261 | 261 | Labour for boring through any type of soil for sinking tube well of required dia. with top enlargement by Rig boring system (either by reverse circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete.\n(a) For depth upto 250 metre for 100 mm dia. tube well with top enlargement of 200 mm dia.ii) Next 50 mtr (For 4nos Boring)\n | BI01010001010000000000000515BI0100001372 | 200 | Mtr |
| 262 | 262 | Supplying, fitting and fixing PVC pipes for underground work of approved make (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo,nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specialsa) PVC Pipes. 200 mm dia. \n(a) For Exposed Work\nPVC Pipes\n | BI01010001010000000000000515BI0100001373 | 140 | mtr |
| 263 | 263 | Supplying, fitting and fixing PVC pipes for underground work of approved make (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo,nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specialsa) PVC Pipes.b) 100 mm dia. \n(a) For Exposed Work\nPVC Pipes\n | BI01010001010000000000000515BI0100001374 | 180 | mtr |
| 264 | 264 | Supplying high density polythene strainer of approved make with adapter confirming to I.S. specification.\n(iv) 100 mm dia\n \n\n | BI01010001010000000000000515BI0100001375 | 60 | mtr |
| 265 | 265 | Surging of existing tube well with chemical treatment and bucket wash (prior to use of compressor machine) and developing the tube well with compressor machine at least 3 (three) days at 8 (eight) hours per day till the yield is obtained at least by 75% of the total specified yield of the tube well (measured by 'V' notch tank) and draw down is within the permissible limit of 10% variation and water so obtained after such washing and developing will be free from sand and bacteria for which test report from the Public Analyst is to be obtained. (The rate is inclusive of all labour and materials including hire charges of tools and plants and cost of materials.)(b) For tube well of size bigger than 100mm dia. with top enlargement to have yield of 6000 gallons per hour | BI01010001010000000000000515BI0100001376 | 4 | Each |
| 266 | 266 | Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete. | BI01010001010000000000000515BI0100001377 | 4 | L.S |
| 267 | 267 | Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction. | BI01010001010000000000000515BI0100001378 | 4 | L.S |
| 268 | 268 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete.\nNote: Initial 6 m. of Annular space between the housing pipe and the bore should not be shrouded with Pea size gravel to avoid contamination with surface water.\n | BI01010001010000000000000515BI0100001379 | 10 | Cum |
| 269 | 269 | Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete.\n | BI01010001010000000000000515BI0100001380 | 10 | Cum |
| 270 | 270 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80\n(medium duty) conforming to ASTMD - 1785 and threaded to match with\nGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,\nspecials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,\nreducing socket, reducing tee, short piece etc. fitted with holder bats\nclamps, including cutting pipes, making threads,fitting, fixing etc.\ncomplete in all respect including cost of all necessary fittings as\nrequired,jointing materials and two coats of painting with approved paint\nin any position above ground. (Payment will be made on the centre line\nmeasurements of total pipe line including all specials. No separate\npayment will be made for accesories, specials. Payment for painting will\nbe made seperately)\n(a) For Exposed Work\nPVC Pipes 80 mm | BI01010001010000000000000515BI0100001381 | 500 | Mtr |
| 271 | 271 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80\n(medium duty) conforming to ASTMD - 1785 and threaded to match with\nGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,\nspecials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,\nreducing socket, reducing tee, short piece etc. fitted with holder bats\nclamps, including cutting pipes, making threads,fitting, fixing etc.\ncomplete in all respect including cost of all necessary fittings as\nrequired,jointing materials and two coats of painting with approved paint\nin any position above ground. (Payment will be made on the centre line\nmeasurements of total pipe line including all specials. No separate\npayment will be made for accesories, specials. Payment for painting will\nbe made seperately)\n(a) For Exposed Work\nPVC Pipes 50mm dia. | BI01010001010000000000000515BI0100001382 | 500 | Mtr |
| 272 | 272 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard\npattern best quality of approved brand bearing I.S.I. marking with\nfittings (tested to 21 kg per sq. cm.). 50 mm dia | BI01010001010000000000000515BI0100001383 | 20 | each |
| 273 | 273 | Supply & fixing 80 mm dia G.I. Union\n | BI01010001010000000000000515BI0100001384 | 20 | each |
| 274 | 274 | Supply & fixing 80 mm dia G.I. Flange\n(A) PVC Pipes\n | BI01010001010000000000000515BI0100001385 | 20 | pair |
| 275 | 275 | a) 75 mm x 150 mm M.S. heavy type belmouth reducing socket. | BI01010001010000000000000515BI0100001386 | 20 | Each |
| 276 | 276 | Supply & fixing 65 mm x 50 mm dia G.I. Reducing Tee (For header) | BI01010001010000000000000515BI0100001387 | 20 | each |
| 277 | 277 | Supply & fixing 100mm dia G.I. nipple short piece 150mm long\n(A) PVC Pipes | BI01010001010000000000000515BI0100001388 | 20 | each |
| 278 | 278 | Supply & fixing 80mm dia G.I. plug | BI01010001010000000000000515BI0100001389 | 20 | each |
| 279 | 279 | Supply & fixing 65 mm x 50 mm dia Reducing socket (For delivery Line from header) \n(A) PVC Pipes | BI01010001010000000000000515BI0100001390 | 20 | each |
| 280 | 280 | Supplying, fitting and fixing heavy type bell mouth reducing socket.a) 100 mm x 200 mm | BI01010001010000000000000515BI0100001391 | 20 | Each |
| 281 | 281 | Supply of PVC pipes & fittings (medium duty) conforming to ASTMD-1785 and threded to match with GI pipes as per IS:1239(Part-I) \nThreded End Cap\n200 mm | BI01010001010000000000000515BI0100001392 | 20 | Each |
| 282 | 282 | \nc) 100 mm dia end plug\n \n | BI01010001010000000000000515BI0100001393 | 20 | Each |
| 283 | 283 | d) Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality | BI01010001010000000000000515BI0100001394 | 20 | Per Set |
| 284 | 284 | Geophysical investigation of the acquifer by electrologging system with all tools and plants as necessary including supply of necessary report. | BI01010001010000000000000515BI0100001395 | 4 | Each Test |
| 285 | 285 | Elbow 80mm | BI01010001010000000000000515BI0100001396 | 60 | each |
| 286 | 286 | Elbow 50mm | BI01010001010000000000000515BI0100001397 | 60 | each |
| 287 | 287 | C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and\nhaving all cast iron components as per I.S. 780/71 solid forged bronze\ninside screw spindle having ultimate tensile strength not less than 4.72 MT\nper sq. cm. Spindle nut valve and seat faces of hard wear resisting,\nmanufactured from best quality gunmetal conforming to I.S. 780/71,\npainted black all over with asphalt base paint tested to 21 kg (hydraulic\npressure) per sq. cm., valve opening to anticlockwise direction, fitted and\nfixed complete. 50 mm | BI01010001010000000000000515BI0100001398 | 4 | each |
| 288 | 288 | Providing 200 mm centre guide.\ni) With Clamp | BI01010001010000000000000515BI0100001399 | 20 | per set |
| 289 | 289 | ELECTRICAL WORKS(Schedule Items) :\nSupply & fixing 415V 315A capacity MS (16SWG) Busbar Chamber having dimension of (500x150 mm) to be fixed on iron frame on wall consisting of 4 nos Cu bars of size (4x40x5mm). The same BBC should have a separate cubicle at one end consisting 3 nos 315A capacity porcelain cut out fuse unit & one nutral bar to receive the service cable including connecting the cut out fuse units with the BBC by S/F PVC insulated copper wire duly socketed at both ends incl. earthing attachment & painting\n(Pwd page-D13 Item no. 19(b)) | BI01010001010000000000000515BI0100001400 | 6 | mtr |
| 290 | 290 | Supply & fixing 415V 200A capacity MS (16SWG) Busbar Chamber having dimension of (500x150 mm) to be fixed on iron frame on wall consisting of 4 nos Cu bars of size (4x20x5mm). The same BBC should have a separate cubicle at one end consisting 3 nos 250A capacity porcelain cut out fuse unit & one nutral bar to receive the service cable including connecting the cut out fuse units with the BBC by S/F4 PVC insulated copper wire duly socketed at both ends incl. earthing attachment & painting\n(Pwd page-D13 Item no. 19(b)) | BI01010001010000000000000515BI0100001401 | 2 | mtr |
| 291 | 291 | Supply & fixing 415V 125A capacity MS (16SWG) Busbar Chamber having dimension of (500x150 mm) to be fixed on iron frame on wall consisting of 4 nos Cu bars of size (4x15x3mm). The same BBC should have a separate cubicle at one end consisting 3 nos 125A capacity porcelain cut out fuse unit & one nutral bar to receive the service cable including connecting the cut out fuse units with the BBC by S/F4 x 35 sqmm PVC insulated copper wire duly socketed at both ends incl. earthing attachment & painting\n(Pwd page-D13 Item no. 19(b)) | BI01010001010000000000000515BI0100001402 | 4 | mtr |
| 292 | 292 | Supply & Fixing 415V 160A TPN switch (Make L&T/Siemens) in suitable SS enclosure with HRC fuses on LS & NL on angle iron frame on wall with Nuts and Bolts etc.incl. S&F 3 Nos DIN type HRC Fuse & earthing attachment.\n[PWD SOR :-Page No-D-3,(Item No-4(a)] | BI01010001010000000000000515BI0100001403 | 3 | Nos |
| 293 | 293 | Supply & Fixing 415V 125A TPN switch (Make L&T/Siemens) in suitable SS enclosure with HRC fuses on LS & NL on angle iron frame on wall with Nuts and Bolts etc.incl. S&F 3 Nos DIN type HRC Fuse & earthing attachment.\n[PWD SOR :-Page No-D-3,(Item No-4(a)] | BI01010001010000000000000515BI0100001404 | 2 | Nos |
| 294 | 294 | Supply & Fixing 415V 100A TPN switch (Make L&T/Siemens) in suitable SS enclosure with HRC fuses on LS & NL on angle iron frame on wall with Nuts and Bolts etc.incl. S&F 3 Nos DIN type HRC Fuse & earthing attachment.\n[PWD SOR :-Page No-D-3,(Item No-4(a)] | BI01010001010000000000000515BI0100001405 | 2 | Nos |
| 295 | 295 | Supply & Fixing 415V 63A TPN switch (Make L&T/Siemens) in suitable SS enclosure with HRC fuses on LS & NL on angle iron frame on wall incl. earthing attachment. \n[PWD SOR :-Page No-D-3,(Item No-4(a)] | BI01010001010000000000000515BI0100001406 | 2 | Nos |
| 296 | 296 | Supply & Fixing 415V 160 A Four pole on load change over switch in suitable SS enclosure (Make L&T) on angle iron frame on wall incl. earthing attachment. [PWD SOR :-Page No-D-2,(Item No-3(a)] | BI01010001010000000000000515BI0100001407 | 5 | Nos |
| 297 | 297 | Supply & Fixing 415V 125A Four pole on load change over switch in suitable SS enclosure (Make L&T) on angle iron frame on wall incl. earthing attachment.\n[PWD SOR :-Page No-D-2,(Item No-3(a)] | BI01010001010000000000000515BI0100001408 | 5 | Nos |
| 298 | 298 | Supply & Fixing 415V 63A Four pole on load change over switch in suitable SS enclosure (Make HPL/Standard/Havells) on angle iron frame on wall incl. earthing attachment.\n[PWD SOR :-Page No-D-2,(Item No-3(a)] | BI01010001010000000000000515BI0100001409 | 3 | Nos |
| 299 | 299 | Supply & Fixing 240V 32 A DP MCB enclouser with 1 No 32A DP MCB C series concealed in wall incl. earthing attachment &\npainting . (Legrand)\nPWD SOR :-Page No-D-6,(Item No-7)Page No-D-9(Item No-11) | BI01010001010000000000000515BI0100001410 | 20 | Nos |
| 300 | 300 | Supply & fixing double door 4 way Vertical TPNMCBDB (Legrand) with IP 42/43 protection SS enclosure on angle iron frame on wall & mending good the damages to original finish incl. Interconnection with suitable size of copper wire & nuetral link & provision of earthing attachment comprising of the following accessories (All make Legrand):\na) 125 A four pole MCCB of breaking capacity 25KA/ 35KA \n with adjustable thermal & fixed magnetic setting --- 1 no\nb) 63 A TP MCB ---1 n\nc) 32A SP MCB -- 9 nos\n\nPWD SOR :-Page No-D-8(Item No-10)Page No-D-6,(Item No-7)Page No-D-11(Item No-15) | BI01010001010000000000000515BI0100001411 | 1 | set |
| 301 | 301 | Supply & fixing double door 4 way Vertical TPNMCBDB (Legrand) with IP 42/43 protection SS enclosure on angle iron frame on wall & mending good the damages to original finish incl. Interconnection with suitable size of copper wire & nuetral link & provision of earthing attachment comprising of the following accessories (All make Legrand):\na) 200 A four pole MCCB of breaking capacity 25KA/ 35KA \n with adjustable thermal & fixed magnetic setting --- 1 no\nb) 63 A TP MCB ---1 n\nc) 32A SP MCB -- 9 nos\nPWD SOR :-Page No-D-8(Item No-10)Page No-D-6,(Item No-7)Page No-D-11(Item No-15) | BI01010001010000000000000515BI0100001412 | 1 | set |
| 302 | 302 | Supply & fixing 4 way double door Horizontal TPNMCBDB (legrand) concealed in wall incl inter connection with suitable copper wire, neutral link & earthing attachment comprising of the followings (All Legrand/Siermens)\na) 63A four pole MCB isolater --- 1 no\nb) 32A SP MCB --- 12 nos\nPWD SOR :-Page No-D-5(Item No-6)Page No-D-6,(Item No-7)Page No-D-10(Item No-14)\n | BI01010001010000000000000515BI0100001413 | 16 | set |
| 303 | 303 | Supply & Fixing (2+12) way SPN MCBDB (Legrand/Seimens) with IP-42/43 protection Concealed in wall & mending good the damages to original finish incl. Interconnection with suitable copper wire & nuetral link incl. earthing attachment comprising with the following:\na) 32A DP MCB isolator --- 1 no\nb) 6 to 32A SP MCB -- 12 nos\nPWD SOR :-Page No-D-5(Item No-6)Page No-D-6,(Item No-7)Page No-D-9(Item No-13) | BI01010001010000000000000515BI0100001414 | 6 | set |
| 304 | 304 | Supply & Fixing (2+8) way SPN MCBDB (Legrand/Seimens) with IP-42/43 protection Concealed in wall & mending good the damages to original finish incl. Interconnection with suitable copper wire & nuetral link incl. earthing attachment comprising with the following:\na) 32A DP MCB isolator --- 1 no\nb) 6 to 16A SP MCB -- 8 nos\nPWD SOR :-Page No-D-5(Item No-6)Page No-D-6,(Item No-7)Page No-D-9(Item No-13) | BI01010001010000000000000515BI0100001415 | 13 | set |
| 305 | 305 | Supply & Fixing (2+6) way SPN MCBDB (Legrand/Havells) with IP-42/43 protection Concealed in wall & mending good the damages to original finish incl. Interconnection with suitable copper wire & nuetral link incl. earthing attachment comprising with the following:\na) 40A DP MCB isolator --- 1 no\nb) 6 to 16A SP MCB -- 6 nos\nPWD SOR :-Page No-D-6(Item No-6)Page No-D-6,(Item No-7)Page No-D-10(Item No-13) | BI01010001010000000000000515BI0100001416 | 6 | set |
| 306 | 306 | Supply & Fixing (2+4) way SPN MCBDB (Legrand/Seimens) with IP-42/43 protection Concealed in wall & mending good the damages to original finish incl. Interconnection with suitable copper wire & nuetral link incl. earthing attachment comprising with the following:\na) 32A DP MCB isolator --- 1 no\nb) 6 to 16A SP MCB -- 4nos\nPWD SOR :-Page No-D-5(Item No-6)Page No-D-6,(Item No-7)Page No-D-9(Item No-13) | BI01010001010000000000000515BI0100001417 | 2 | set |
| 307 | 307 | Laying of the following Alu. armoured cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed\nPWD SOR :-Page No-F-2(Item No-1(a)&1(b)\na) 3.5 x 95 sq mm | BI01010001010000000000000515BI0100001418 | 395 | mtr |
| 308 | 308 | Laying of the following Alu. armoured cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed\nPWD SOR :-Page No-F-2(Item No-1(a)&1(b)\nb) 3.5 x 70 sq mm | BI01010001010000000000000515BI0100001419 | 375 | mtr |
| 309 | 309 | Laying of the following Alu. armoured cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed\nPWD SOR :-Page No-F-2(Item No-1(a)&1(b)\nc)3.5 x 50 sq mm | BI01010001010000000000000515BI0100001420 | 125 | mtr |
| 310 | 310 | Laying of the following Alu. armoured cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed\nPWD SOR :-Page No-F-2(Item No-1(a)&1(b)\nd) 3.5 x 35 sq mm | BI01010001010000000000000515BI0100001421 | 625 | mtr |
| 311 | 311 | Laying of the following Alu. armoured cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed\nPWD SOR :-Page No-F-2(Item No-1(a)&1(b)\ne) 3.5 x 25 sq mm | BI01010001010000000000000515BI0100001422 | 345 | mtr |
| 312 | 312 | Laying of the following Alu. armoured cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed\nPWD SOR :-Page No-F-2(Item No-1(a)&1(b)\nf) 4 x 16 sq mm | BI01010001010000000000000515BI0100001423 | 475 | mtr |
| 313 | 313 | Laying of the following Alu. armoured cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed\nPWD SOR :-Page No-F-2(Item No-1(a)&1(b)\ng) 2 x 10 sq mm | BI01010001010000000000000515BI0100001424 | 100 | mtr |
| 314 | 314 | Laying of the following Alu. armoured cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed\nPWD SOR :-Page No-F-2(Item No-1(a)&1(b)\nh) 2 x 6 sq mm | BI01010001010000000000000515BI0100001425 | 700 | mtr |
| 315 | 315 | Laying of cable above 3½ core 90 sqmm and upto 3½ core 150\nsqmm on wall/surface including S & F MS clams with earthing\nattachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as\nnecy., mending good damages and painting\nPWD SOR :-Page No-F-1(Item No-2(e) | BI01010001010000000000000515BI0100001426 | 45 | mtr |
| 316 | 316 | Laying of cable above 3½ core 50 sqmm and upto 3½ core 90\nsqmm on wall/surface including S & F MS clams with earthing\nattachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as\nnecy., mending good damages and painting\nPWD SOR :-Page No-F-1(Item No-2(d) | BI01010001010000000000000515BI0100001427 | 25 | mtr |
| 317 | 317 | Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on\nwall/surface incl. S & F MS saddles with earthing attachment in 2\nx 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending\ngood damages and painting\nPWD SOR :-Page No-F-1(Item No-2(c) | BI01010001010000000000000515BI0100001428 | 50 | mtr |
| 318 | 318 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F\nMS saddles with earthing attachment in 10 SWG GI (Hot Dip)\nWire, making holes etc. as necy. mending good damages and\npainting\nPWD SOR :-Page No-F-1(Item No-2(b) | BI01010001010000000000000515BI0100001429 | 70 | mtr |
| 319 | 319 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F\nMS saddles with earthing attachment in 10 SWG GI (Hot Dip)\nWire, making holes etc. as necy. mending good damages and\npainting\nPWD SOR :-Page No-F-1(Item No-2(a) | BI01010001010000000000000515BI0100001430 | 170 | mtr |
| 320 | 320 | Supply & fixing compression type gland with brass gland brass ring incl. socketing the ends off by crimping method incl. S/F solderless socket (Dowels make) & jointing ,materials etc. Of the following XLPE/A cable &Finishing the end of following XLPE/PVC armoured cables by\ncrimping method incl. supplying and fixing solderless socket\n(Dowels make), tapes, anticorrosive paste & jointing materials:\nPWD SOR :-Page No-F-4&F-5(Item No-7&8(b)\nd) 3.5 x 95 sq mm | BI01010001010000000000000515BI0100001431 | 8 | set |
| 321 | 321 | Supply & fixing compression type gland with brass gland brass ring incl. socketing the ends off by crimping method incl. S/F solderless socket (Dowels make) & jointing ,materials etc. Of the following XLPE/A cable &Finishing the end of following XLPE/PVC armoured cables by\ncrimping method incl. supplying and fixing solderless socket\n(Dowels make), tapes, anticorrosive paste & jointing materials:\nPWD SOR :-Page No-F-4&F-5(Item No-7&8(b)\nd) 3.5 x 70 sq mm | BI01010001010000000000000515BI0100001432 | 4 | set |
| 322 | 322 | Supply & fixing compression type gland with brass gland brass ring incl. socketing the ends off by crimping method incl. S/F solderless socket (Dowels make) & jointing ,materials etc. Of the following XLPE/A cable &Finishing the end of following XLPE/PVC armoured cables by\ncrimping method incl. supplying and fixing solderless socket\n(Dowels make), tapes, anticorrosive paste & jointing materials:\nPWD SOR :-Page No-F-4&F-5(Item No-7&8(b)\ne)3.5 x 50 sq mm | BI01010001010000000000000515BI0100001433 | 6 | set |
| 323 | 323 | Supply & fixing compression type gland with brass gland brass ring incl. socketing the ends off by crimping method incl. S/F solderless socket (Dowels make) & jointing ,materials etc. Of the following XLPE/A cable &Finishing the end of following XLPE/PVC armoured cables by\ncrimping method incl. supplying and fixing solderless socket\n(Dowels make), tapes, anticorrosive paste & jointing materials:\nPWD SOR :-Page No-F-4&F-5(Item No-7&8(b)\nf) 3.5 x 35 sq mm | BI01010001010000000000000515BI0100001434 | 8 | set |
| 324 | 324 | Supply & fixing compression type gland with brass gland brass ring incl. socketing the ends off by crimping method incl. S/F solderless socket (Dowels make) & jointing ,materials etc. Of the following XLPE/A cable &Finishing the end of following XLPE/PVC armoured cables by\ncrimping method incl. supplying and fixing solderless socket\n(Dowels make), tapes, anticorrosive paste & jointing materials:\nPWD SOR :-Page No-F-4&F-5(Item No-7&8(b)\ng) 3.5 x 25 sq mm | BI01010001010000000000000515BI0100001435 | 16 | set |
| 325 | 325 | Supply & fixing compression type gland with brass gland brass ring incl. socketing the ends off by crimping method incl. S/F solderless socket (Dowels make) & jointing ,materials etc. Of the following XLPE/A cable &Finishing the end of following XLPE/PVC armoured cables by\ncrimping method incl. supplying and fixing solderless socket\n(Dowels make), tapes, anticorrosive paste & jointing materials:\nPWD SOR :-Page No-F-4&F-5(Item No-7&8(b)\nh) 4 x 16 sq mm | BI01010001010000000000000515BI0100001436 | 10 | set |
| 326 | 326 | Supply & fixing compression type gland with brass gland brass ring incl. socketing the ends off by crimping method incl. S/F solderless socket (Dowels make) & jointing ,materials etc. Of the following XLPE/A cable &Finishing the end of following XLPE/PVC armoured cables by\ncrimping method incl. supplying and fixing solderless socket\n(Dowels make), tapes, anticorrosive paste & jointing materials:\nPWD SOR :-Page No-F-4&F-5(Item No-7&8(b)\nh) 2 x 10 sq mm | BI01010001010000000000000515BI0100001437 | 6 | set |
| 327 | 327 | Supply & fixing compression type gland with brass gland brass ring incl. socketing the ends off by crimping method incl. S/F solderless socket (Dowels make) & jointing ,materials etc. Of the following XLPE/A cable &Finishing the end of following XLPE/PVC armoured cables by\ncrimping method incl. supplying and fixing solderless socket\n(Dowels make), tapes, anticorrosive paste & jointing materials:\nPWD SOR :-Page No-F-4&F-5(Item No-7&8(b)\nk) 2 x 6 sq mm | BI01010001010000000000000515BI0100001438 | 30 | set |
| 328 | 328 | Supply & laying medium gauge G.I. Pipe (ISI-Medium) for cable protection with pole clamp.\nPWD SOR :-Page No-F-6(Item No-11(a,c,d & f,g)\na) 100 mm dia | BI01010001010000000000000515BI0100001439 | 5 | mtr |
| 329 | 329 | Supply & laying medium gauge G.I. Pipe (ISI-Medium) for cable protection with pole clamp.\nPWD SOR :-Page No-F-6(Item No-11(a,c,d & f,g)\nb) 80 mm dia | BI01010001010000000000000515BI0100001440 | 11 | mtr |
| 330 | 330 | Supply & laying medium gauge G.I. Pipe (ISI-Medium) for cable protection with pole clamp.\nPWD SOR :-Page No-F-6(Item No-11(a,c,d & f,g)\nc) 50 mm dia | BI01010001010000000000000515BI0100001441 | 12 | mtr |
| 331 | 331 | Supply & laying medium gauge G.I. Pipe (ISI-Medium) for cable protection with pole clamp.\nPWD SOR :-Page No-F-6(Item No-11(a,c,d & f,g)\nd) 40 mm dia | BI01010001010000000000000515BI0100001442 | 20 | mtr |
| 332 | 332 | Supply & laying medium gauge G.I. Pipe (ISI-Medium) for cable protection with pole clamp.\nPWD SOR :-Page No-F-6(Item No-11(a,c,d & f,g)\ne)25mm dia | BI01010001010000000000000515BI0100001443 | 120 | mtr |
| 333 | 333 | Supplying and fixing polythene pipe complete with fittings as\nnecy. under ceiling/beam, bound with 22 SWG GI binding wire\nincl. supplying and drawing 1x18 SWG GI Wire as fish wire\ninside the pipes and fittings and providing 50 mm dia disc of\nMS sheet (20 SWG) having colour paint at one face fastened\nat the load point end of the polythene pipe with fish wire\n(synchronizing with roof/beam casting work of building\nconstruction)\n19mm dia 3mm thick Polythene Pipe\nPWD SOR :-Page No-E-2(Item No-1(b) | BI01010001010000000000000515BI0100001444 | 800 | RM |
| 334 | 334 | Cutting Channel of size (40 mm x 40 mm) on masonry wall by\nElectric operated cutting machine incl. supplying & fixing\nheavy gauge 19 mm, 3 mm thick Polythene pipe by means of\nanchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG\nincl. supplying and drawing 18 SWG GI wire as Fish wire and\nmending good damages to original finish by using own tools\nand tackles\n19 mm dia 3 mm thick polythene pipe without earth\ncontinuity wire\nPWD SOR :-Page No-E-3(Item No-6(a) | BI01010001010000000000000515BI0100001445 | 6150 | RM |
| 335 | 335 | Cutting Channel of size (43 mm x 43 mm) on masonry wall by\nElectric operated cutting machine incl. supplying & fixing\nheavy gauge 25 mm, 3 mm thick Polythene pipe by means of\nanchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG\nincl. supplying and drawing 18 SWG GI wire as Fish wire and\nmending good damages to original finish by using own tools\nand tackles\n25 mm dia 3 mm thick polythene pipe without earth\ncontinuity wire\nPWD SOR :-Page No-E-3(Item No-7(a) | BI01010001010000000000000515BI0100001446 | 1195 | RM |
| 336 | 336 | Supply & drawing of 1.1 Kv grade single core stranded 'FR' Pvc insulated & unsheathed copper wire (Phinolex/Havells/ Kei/ Mescab) of the following sizes through suitable alkathene pipe recessed in wall \nPWD SOR :-Page No E-9(Item No-1)\na) 4 x 16 sqmm + 2 x 10 sq mm (VTPN DB to TPNDB all floors) | BI01010001010000000000000515BI0100001447 | 120 | mtr |
| 337 | 337 | Supply & drawing of 1.1 Kv grade single core stranded 'FR' Pvc insulated & unsheathed copper wire (Phinolex/Havells/ Kei/ Mescab) of the following sizes through suitable alkathene pipe recessed in wall \nPWD SOR :-Page No E-9(Item No-1)\nb) 4 x 10 sqmm + 2 x 6 sq mm | BI01010001010000000000000515BI0100001448 | 70 | mtr |
| 338 | 338 | Supply & drawing of 1.1 Kv grade single core stranded 'FR' Pvc insulated & unsheathed copper wire (Phinolex/Havells/ Kei/ Mescab) of the following sizes through suitable alkathene pipe recessed in wall \nPWD SOR :-Page No E-9(Item No-1)\nb) 4 x 6 sqmm + 2 x 4sq mm | BI01010001010000000000000515BI0100001449 | 70 | mtr |
| 339 | 339 | Supply & drawing of 1.1 Kv grade single core stranded 'FR' Pvc insulated & unsheathed copper wire (Phinolex/Havells/ Kei/ Mescab) of the following sizes through suitable alkathene pipe recessed in wall \nPWD SOR :-Page No E-9(Item No-1)\nb) 4 x 2.5sqmm + 2 x 1.5 sq mm | BI01010001010000000000000515BI0100001450 | 180 | mtr |
| 340 | 340 | Supply & drawing of 1.1 Kv grade single core stranded 'FR' Pvc insulated & unsheathed copper wire (Phinolex/Havells/ Kei/ Mescab) of the following sizes through suitable alkathene pipe recessed in wall \nPWD SOR :-Page No E-9(Item No-1)\nc) 2 x 6 + 1 x 4 sq mm | BI01010001010000000000000515BI0100001451 | 600 | mtr |
| 341 | 341 | Supply & drawing of 1.1 Kv grade single core stranded 'FR' Pvc insulated & unsheathed copper wire (Phinolex/Havells/ Kei/ Mescab) of the following sizes through suitable alkathene pipe recessed in wall \nPWD SOR :-Page No E-9(Item No-1)\nd) 2 x 4 + 1 x 2.5 sq mm | BI01010001010000000000000515BI0100001452 | 1200 | mtr |
| 342 | 342 | Supply & drawing of 1.1 Kv grade single core stranded 'FR' Pvc insulated & unsheathed copper wire (Phinolex/Havells/ Kei/ Mescab) of the following sizes through suitable alkathene pipe recessed in wall \nPWD SOR :-Page No E-9(Item No-1)\ne) 2 x 2.5 + 1 x 1.5 sq mm | BI01010001010000000000000515BI0100001453 | 2500 | mtr |
| 343 | 343 | Supply & drawing of 1.1 Kv grade single core stranded 'FR' Pvc insulated & unsheathed copper wire (Phinolex/Havells/ Kei/ Mescab) of the following sizes through suitable alkathene pipe recessed in wall \nPWD SOR :-Page No E-9(Item No-1)\nf)4x16 sq.mm + 2x10 sq.mm (panel to TPNDB) | BI01010001010000000000000515BI0100001454 | 35 | mtr |
| 344 | 344 | Supply & drawing of 1.1 Kv grade single core stranded 'FR' Pvc insulated & unsheathed copper wire (Phinolex/Havells/ Kei/ Mescab) of the following sizes through suitable alkathene pipe recessed in wall \nPWD SOR :-Page No E-9(Item No-1)\ng) 3 x 1.5 sq mm | BI01010001010000000000000515BI0100001455 | 3370 | mtr |
| 345 | 345 | Distn. wiring in 3 x 1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Finolex/ Gloster/ Havells /Mescab/KEI) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Legrand/ Crabtree/ North west/Philips) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending gooddamages\nAvg Run 7 Mtr\nPWD SOR :-Page No-E-20(Item No-1(ii) | BI01010001010000000000000515BI0100001456 | 250 | pts |
| 346 | 346 | Distn. wiring in 3 x 1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Finolex/ Gloster/ Havells /Mescab/KEI) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Legrand/ Crabtree/ North west/Philips) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending gooddamages\nAvg Run 8 Mtr\nPWD SOR :-Page No-E-20(Item No-1(iii) | BI01010001010000000000000515BI0100001457 | 650 | pts |
| 347 | 347 | Distribution wiring in 1.1 KV grade 3 x 1.5 sq mm single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex/Gloster /Havells/ Mescab/KEI) in 19mm bore, 3mm thick polythene pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240V 6A 3 pin Modular type plug socket & modular type switch (Crabtree) incl. S&F earth continuity wire fixed on 4 module GI switch board with 3/4 module top cover plate flushed in wall incl mending good damage to original finish. \na) on board \nPWD SOR :-Page No-E-20(Item No-3(i) | BI01010001010000000000000515BI0100001458 | 125 | pts |
| 348 | 348 | Distribution wiring in 1.1 KV grade 3 x 1.5 sq mm single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex/Gloster /Havells/ Mescab/KEI) in 19mm bore, 3mm thick polythene pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240V 6A 3 pin Modular type plug socket & modular type switch (Crabtree) incl. S&F earth continuity wire fixed on 4 module GI switch board with 3/4 module top cover plate flushed in wall incl mending good damage to original finish. \n \n\nb) Average run 4.5 mtr\nPWD SOR :-Page No-E-20(Item No-3(iv) | BI01010001010000000000000515BI0100001459 | 40 | pts |
| 349 | 349 | Supply & fixing of Modular type computer plug board of 8 module GI box with cover plate recessed in wall comprising of the following(All cabtree):\na) 6/16A socket & 16A switch ---1 set \nb) 6A socket - 2 nos & 16A switch - 1 no --- 1 set\nPWD SOR :-Page No-E-17(Item No-1(c),3(b),4(a)&4(b) | BI01010001010000000000000515BI0100001460 | 60 | sets |
| 350 | 350 | Supply & Fixing 240 V, 16 A, 3 pin Modular type Power plug socket (Crabtree/Legrand) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover \nplate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu and earth continuity wire\nPWD SOR :-Page No-E-18 Item No-9(b) | BI01010001010000000000000515BI0100001461 | 25 | each |
| 351 | 351 | Supply & fixing of 16A Modular type Switch of 2 module GI box with cover plate recessed in wall \nPWD SOR :-Page No-E-17 Item No-2(a)&3(b) | BI01010001010000000000000515BI0100001462 | 12 | each |
| 352 | 352 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall & making necy. connections with PVC Cu wire and earth wire (AC)PWD SOR :-Page No-E-17 Item No-5(a) | BI01010001010000000000000515BI0100001463 | 28 | each |
| 353 | 353 | Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Cabtree) & necy. Connections. (AC)\nPWD SOR :-Page No-E-17 Item No-5(b) | BI01010001010000000000000515BI0100001464 | 28 | each |
| 354 | 354 | Distn. wiring in 3x1.5 sqmm single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Gloater/ Fionolex/ havells /KEI/Mescab) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/ perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish.\nAvg Run 9 Mtr\nPWD SOR :-Page No-E-9 Item No-2(a-iv)\n | BI01010001010000000000000515BI0100001465 | 432 | Pt |
| 355 | 355 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Gloater/Fionolex/havells /KEI/Mescab) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch boardwith bakelite/perspex (wall matching colour) top cover (3 mm thick)flushed in wall incl. mending good damages to original finish\na) on board \nPWD SOR :-Page No-E-10 Item No-4(a-i) | BI01010001010000000000000515BI0100001466 | 81 | pts |
| 356 | 356 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Gloater/Fionolex/havells /KEI/Mescab) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch boardwith bakelite/perspex (wall matching colour) top cover (3 mm thick)flushed in wall incl. mending good damages to original finish\n b) Ave run 4.5 mtr \nPWD SOR :-Page No-E-10 Item No-4(a-iv) | BI01010001010000000000000515BI0100001467 | 60 | pts |
| 357 | 357 | Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Anchor) on sheet metal switch board embedded in wall incl. S/F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necy connections (Computer)\nPWD SOR :-Page No-E-7 Item No-25 | BI01010001010000000000000515BI0100001468 | 20 | each |
| 358 | 358 | Supply & Fixing 240 V, 20A, Power plug socket with separate 20 A Piano key type switch (Anchor) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board & bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required\nPWD SOR :-Page No-E-6 Item No-22 | BI01010001010000000000000515BI0100001469 | 28 | each |
| 359 | 359 | Supply & Fixing 240 V, 20 A Piano key type Control switch (Anchor) on sheet metal switch board incl. S & F 100x100x65mm MS\n(16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required\nPWD SOR :-Page No-E-6 Item No-17(b) | BI01010001010000000000000515BI0100001470 | 15 | each |
| 360 | 360 | Fixing only single/twin LED Tube light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG supports fixed with “L” type MS clamp whose one side fixed onceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length\nPWD SOR :-Page No-C-2 Item No-15 | BI01010001010000000000000515BI0100001471 | 660 | each |
| 361 | 361 | Fixing only Single/Twin LED Tube light fitting complete with all accessories directly on wall/ceiling by HW round block & suitable size of MS fastener\nPWD SOR :-Page No-C-2 Item No-14(b) | BI01010001010000000000000515BI0100001472 | 60 | each |
| 362 | 362 | Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with PVC sheet, placed in order to prevent concrete from entering the box.\nPWD SOR :-Page No-D-14 Item No-31 | BI01010001010000000000000515BI0100001473 | 300 | each |
| 363 | 363 | Supplying & Fixing 240 V AC/DC superior type Multitune (min 10 nos. tune) Call Bell (Anchor) with selector switch for single/Multi Tunes mode, Battery operated on HW board incl. S&F HW board\nPWD SOR :-Page No-D-13 Item No-20(c) | BI01010001010000000000000515BI0100001474 | 40 | each |
| 364 | 364 | Fixing only ceiling fan complete with blades, canopy, fork, rubber\nbush etc. incl. S&F connecting wire for down rod upto 30 cm incl.\npainting the rod with approved paint and making necessary\nconnection as required by 2x1.5 sqmm flexible copper wire.\nPWD SOR :-Page No-C-3 Item No-21(a) | BI01010001010000000000000515BI0100001475 | 300 | each |
| 365 | 365 | Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts &\nwashers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20\nPVC insulated flexible copper wire 0.5 mt. length\nPWD SOR :-Page No-C-4 Item No-29 | BI01010001010000000000000515BI0100001476 | 2 | each |
| 366 | 366 | Supply & Fixing electronics step type, Moduler Socket (2 module), Fan regulator (Legrand/Cabtree)\nPWD SOR :-Page No-E-18 Item No-10 | BI01010001010000000000000515BI0100001477 | 180 | each |
| 367 | 367 | Supply & Fixing electronics step & Socket type Fan regulator (Anchor)\nPWD SOR :-Page No-E-6 Item No-18(b) | BI01010001010000000000000515BI0100001478 | 150 | each |
| 368 | 368 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust & supply GI louvre shutter after cutting hole on wall & mending good the damages of following diameter : 300mm (12\") sweep\n [PWD Page No-C-4, Item No:28(b) & D-14 Item No: 32(b)] | BI01010001010000000000000515BI0100001479 | 80 | each |
| 369 | 369 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust & supply GI louvre shutter after cutting hole on wall & mending good the damages of following diameter :375mm (15\") sweep\n [PWD Page No-C-4, Item No:28(c) & D-14 Item No: 32(b)] | BI01010001010000000000000515BI0100001480 | 6 | each |
| 370 | 370 | Supplying and Fixing GI water proof looping cable box ( 200 x 150 x 100mm ) having hinged GI Top Cover having 4 mm thick with rubber gasketlining, ,embeded on wall earthing terminal with lug etc. of the following sizes as indicated below,Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc.\n (PWD Page I-2 )[Item No: 16] | BI01010001010000000000000515BI0100001481 | 147 | each |
| 371 | 371 | Fixing only outdoor/street light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/ providing clamping arrangement & necy. GI reducer as required S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.\n(PWD Page C-3 )[Item No: 19] | BI01010001010000000000000515BI0100001482 | 147 | each |
| 372 | 372 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.\nlong and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground\nlevel as below( By ISI-Medium GI pipe) \n(PWD Page G-1)[Item No: 2(a)] | BI01010001010000000000000515BI0100001483 | 36 | set |
| 373 | 373 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of No. 4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. asrequired and mending good damages \n(PWD Page G-2)[Item No: 5(a){i}] | BI01010001010000000000000515BI0100001484 | 90 | mtr |
| 374 | 374 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required\n (PWD Page G-2)[Item No: 4(a)] | BI01010001010000000000000515BI0100001485 | 19 | mtr |
| 375 | 375 | Erection of 9.00 m ST bend pole with sole plate in CC foundation (600x600x150mm) thick CC (4:2:1) base block below sole plate with hard jhama metal incl CC (6:3:1) muffing 0.30 m dia 03.0 m above ground level incl making drilled hole on pole for earth bolt & carriage upto 1.6 Km from store to work site in cluding filling up the the exacavated earth pit with shifted soil .\n (PWD Page H-1)[Item No: 1(a)] | BI01010001010000000000000515BI0100001486 | 45 | set |
| 376 | 376 | Painting the 9.00 m ST pole with two coats of aluminium paint of approved make over one coat of R.O primer incl preparation of surface by sand paper/emery incl cleaning etc.\n (PWD Page H-2)[Item No: 4(a) i&ii] | BI01010001010000000000000515BI0100001487 | 45 | item |
| 377 | 377 | Earthing the the Installation by 50 mm dia G.I. Pipe (ISI -M) 3.64 mtr long & 1x4 SWG G.I.(Hot dip) wire (4 mtr long) with suitable nuts, bolts & washer etc. Incl S/F 15 mm dia GI protection pipe (1 mtr long) to be filled with bitumen partly under ground level & partly under ground level driven to an depth of 3.65 mtr below G.L. \n(PWD Page G-1)[Item No: 2(a)] | BI01010001010000000000000515BI0100001488 | 45 | each |
| 378 | 378 | Fixing only Floodlight Fitting with suitable tie clamps and MS plate\nfor mounting on Pole/Tower or similar structure.Street fitting on ST bend pole & making necessary connection.\n(PWD Page C-3)[Item No: 20(a)] | BI01010001010000000000000515BI0100001489 | 45 | each |
| 379 | 379 | Non Schedule Item Of Works(Electrical) :\nSupply & delevery of 1.1 Kv grade XLPE Aluminium armoured cable (Make Gloster/Polycab/Havells/Mescab) \na) 3.5 x 95 sq mm | BI01010001010000000000000515BI0100001490 | 440 | mtr |
| 380 | 380 | Supply & delevery of 1.1 Kv grade XLPE Aluminium armoured cable (Make Gloster/Polycab/Havells/Mescab) \nb) 3.5 x 70 sq mm | BI01010001010000000000000515BI0100001491 | 400 | mtr |
| 381 | 381 | Supply & delevery of 1.1 Kv grade XLPE Aluminium armoured cable (Make Gloster/Polycab/Havells/Mescab) \nc) 3.5 x 50 sq mm | BI01010001010000000000000515BI0100001492 | 150 | mtr |
| 382 | 382 | Supply & delevery of 1.1 Kv grade XLPE Aluminium armoured cable (Make Gloster/Polycab/Havells/Mescab) \nd) 3.5 x 35 sq mm | BI01010001010000000000000515BI0100001493 | 650 | mtr |
| 383 | 383 | Supply & delevery of 1.1 Kv grade XLPE Aluminium armoured cable (Make Gloster/Polycab/Havells/Mescab) \ne) 3.5 x 25 sq mm | BI01010001010000000000000515BI0100001494 | 390 | mtr |
| 384 | 384 | Supply & delevery of 1.1 Kv grade XLPE Aluminium armoured cable (Make Gloster/Polycab/Havells/Mescab) \nf) 4 x 16 sq mm | BI01010001010000000000000515BI0100001495 | 500 | mtr |
| 385 | 385 | Supply & delevery of 1.1 Kv grade XLPE Aluminium armoured cable (Make Gloster/Polycab/Havells/Mescab) \ng)2 x 10 sqmm | BI01010001010000000000000515BI0100001496 | 120 | mtr |
| 386 | 386 | Supply & delevery of 1.1 Kv grade XLPE Aluminium armoured cable (Make Gloster/Polycab/Havells/Mescab) \nh) 2 x 6 sq mm | BI01010001010000000000000515BI0100001497 | 850 | mtr |
| 387 | 387 | Supply of 601 mm12 W single Aluminium extruded LED batten light in square shape with high efficient polycarbonate diffuser for uniform lighting,complete with all acessaries (Make Legaro Lita RBJ 100 0012 /Crompton, cat no - LT8-865-2-525/Philips ) | BI01010001010000000000000515BI0100001498 | 90 | set |
| 388 | 388 | Supply of 1176 mm 24 W single Aluminium extruded LED batten light in square shape with high efficient polycarbonate diffuser for uniform lighting, complete with all acessaries(Make Legaro Lita RBJ 100 0024 /Crompton, cat no - LT8-865-2-525/Philips ) | BI01010001010000000000000515BI0100001499 | 459 | set |
| 389 | 389 | Supply The stripo LED batten in square shape with aluminium housing & PC end cap. The luminaire and its\ncomponents are designed for Indoor application. Inbuilt high efficient LEDs used with milky white diffuser\nfor glare free high luminious output. of 1196 mm 40 W single Aluminium extruded LED batten light in square shape with high efficient polycarbonate diffuser for uniform lighting, complete with all acessaries (Make Legaro Stripo LST 1240 /Crompton/Philips ) | BI01010001010000000000000515BI0100001500 | 180 | set |
| 390 | 390 | Supply and Delivery LED42 Watt Recessed grid - ceiling luminaire, suitable for 600 x 600 module and is enclosed with high efficient flat\nPMMA low glare diffuser complete with all acessaries(Make Legaro Modena LER 2642 /Crompton/Philips ) | BI01010001010000000000000515BI0100001501 | 28 | set |
| 391 | 391 | Supply & fixing LED Skirting lightdesigner step light with integrated high efficient LED designed for safety & style for stairways, patios,\ndecks, balcony,Foot Lamp(Night Lamp) Purpose areas & walkways complete with all acessaries \n (Make Lagraro,Locus1 cat no - LOD 3006 /Crompton/Philips) | BI01010001010000000000000515BI0100001502 | 16 | each |
| 392 | 392 | Supply 18 Watt (Dimension 322x114x52) IP 66 LED street light with high pressure aluminium die cast body and lens toughened glass. Powered with high watt LED chips to give the best output. Cleo comes with light efficacy of 110 lm/w. Wider spread\nangle of lens with toughened glass provide extra coverage of light on road complete with all acessaries (Make Legaro Cleo, Cat no -LCL 0018 /Crompton/Philips/Havells) | BI01010001010000000000000515BI0100001503 | 25 | each |
| 393 | 393 | Supply 36 Watt (Dimension 385x155x62) IP 66 LED street light with high pressure aluminium die cast body and lens toughened glass. Powered with high watt LED chips to give the best output. Cleo comes with light efficacy of 110 lm/w. Wider spread\nangle of lens with toughened glass provide extra coverage of light on road complete with all acessaries (Make Legaro Cleo, Cat no -LCL 0036 /Crompton/Philips/Havells) | BI01010001010000000000000515BI0100001504 | 35 | each |
| 394 | 394 | Supply 72 Watt (Dimension 395x195x70) Unique designed Street light with High Power LED and Back driver opening comes with all the options\nsuitable for lighting outdoor application. Wider spread angle of lens with toughened glass provide extra\ncoverage of light on roads. Aluminium Die cast Housing with unique heat sink fins structure provides\nthermal management to natural convection. This IP 66 product comes with fixture efficacy of 110 lm/w.\n(Make Legaro Cleo, Cat no -LCL 0072 /Crompton/Philips/Havells) | BI01010001010000000000000515BI0100001505 | 42 | each |
| 395 | 395 | Supply 110 Watt (Dimension 445x215x65) Unique designed Street light with High Power LED and Back driver opening comes with all the options\nsuitable for lighting outdoor application. Wider spread angle of lens with toughened glass provide extra\ncoverage of light on roads. Aluminium Die cast Housing with unique heat sink fins structure provides\nthermal management to natural convection. This IP 66 product comes with fixture efficacy of 110 lm/w.\n(Make Legaro Cleo, Cat no -LCL 00110 /Crompton/Philips/Havells) | BI01010001010000000000000515BI0100001506 | 45 | set |
| 396 | 396 | Supply and fixing 9W LED light (Make Philips Ace Saver ,825 lm,10K life hours HSN CODE 85395000/ Crompton/Havells)t | BI01010001010000000000000515BI0100001507 | 50 | each |
| 397 | 397 | Supply & fixing 12 W LED bulk head light fittings on wall/ ceiling complete set .(Legaro Sia Cat no-LBH 0012/Crompton/Philips/Havells) | BI01010001010000000000000515BI0100001508 | 46 | each |
| 398 | 398 | Supply of 1200 mm sweep Ceiling Fan (Orient- New Breeze / Usha- Striker Plus : White or equivaent as approved by EIC) complete with all accessories including S & F necessary copper flexible wire. | BI01010001010000000000000515BI0100001509 | 300 | set |
| 399 | 399 | Supply & Fixing osilating type wall bracket Fan complete with all accessories to fixed on wall with ms fastener.(Orient Wall-45 ) | BI01010001010000000000000515BI0100001510 | 4 | set |
| 400 | 400 | Supply & delivery of the following split type AC machines (3 Star rated) (Make Carrier/ Hitachi/ Mitsubishi) complete with indoor outdoor unit & coper refrigerant pipes upto 5 mtr length with synthetic insulation, drain pipe etc.\na) 1 TR Split type (3 Star rated) | BI01010001010000000000000515BI0100001511 | 2 | set |
| 401 | 401 | Supply & delivery of the following split type AC machines (3 Star rated) (Make Carrier/ Hitachi/ Mitsubishi) complete with indoor outdoor unit & coper refrigerant pipes upto 5 mtr length with synthetic insulation, drain pipe etc.\nb) 1.5 TR Split type(3 Star rated) | BI01010001010000000000000515BI0100001512 | 7 | SET |
| 402 | 402 | Supply & delivery of the following split type AC machines (3 Star rated) (Make Carrier/ Hitachi/ Mitsubishi) complete with indoor outdoor unit & coper refrigerant pipes upto 5 mtr length with synthetic insulation, drain pipe etc.\nC) 2 TR Split type(3 Star rated) | BI01010001010000000000000515BI0100001513 | 5 | set |
| 403 | 403 | Installation, testing & commissioning of the 1/1.5/2.0 ton capacity split Air Conditioners indoor and outdoor unit after cutting hole in wall as required and supply & installation of MS angle iron frame made by 40x40x5 mm thick & intermediate support by 25x6 mm MS flat for providing condensing unit after cutting in wall as required & mending good damages and finishing by sand, cement, 14 size stone chip as per direction of EIC | BI01010001010000000000000515BI0100001514 | 14 | set |
| 404 | 404 | Supply & fixing drawing copper pipe, Power cable, Drainage pipe with necessary insulation etc. complex | BI01010001010000000000000515BI0100001515 | 56 | mtr |
| 405 | 405 | Supply & Fixing 240 V, 25 A, Modular type AC m/c starter (Eletron OLP - 3) 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire .(For AC m/c) | BI01010001010000000000000515BI0100001516 | 28 | each |
| 406 | 406 | OUT DOOR FEEDER PILLAR no -1\nSupply & delivery at site, floor mounted, Double Door Type Feeder Pillar (IP-65/66), fabricated with 10 SWG MS sheet (External) & fixed on MS Angle Iron, totally enclosed, dust and vermin proof, with sloped foof and 4 Nos. Pedestals by 40 mm x 40 mm x 6 mm MS Angle Iron, each having length of 400 mm along with 6 mm thick MS foundation plate, welded at the bottom with holes on each etc. The Legs fitted with supporting Angle Iron Base Frame, are separable.\nThe Feeder Pillar will be powder coated painting. All sorts of inter connections by PVC insulated and unsheathed Copper conductor 'FR' having end finishing with socketing. Main Bus Bar by 4 x (32 mm x 9 mm) pure electrolytic graded Copper Flat on DMC Insulators & the Sub Main Bus Bars are 4 x ( 25 mm x 5 mm), for both 125A MCCBs & the MCBs of rating 80A & 63A would be inter connected by 25 Sq mm & 16 Sqmm PVC insulated and unsheathed 'FR' copper conductor wires etc. complete. The Inner Door behind the first door is of 16 SWG CRCA Sheet Metal. Inside of the Feeder Pillar, the cubicle / compartment type arrangement would be done, having Bus Bar Chamber &Cable Alley and will be incorporated with the following electrical accessories. There will be arrangement of entry/exit of cables through detachable gland plate at the bottom. The over all size of the Feeder Pillars are to be suitable to accomodate the following switching / measuring /indicating / bussing accessories and over all dimension of 1500 mm (W)x1500 mm (H)x 400 mm (D) (Excluding the Leg supports of height of 400 mm). Inscription level plates and should be of anodised /engraved to indicate the capacity /starting /destination of the feeders etc. The F. Pillar, base channels will be painted by powder coating system. There will be continuous 1x(38 mm x 6 mm) GI earth bus at the bottom rear end & would be projected at both sides of the Feeder Pillar. The F. Pillar would have the arrangement of cubicle illumination during open period of the door The GA drawing, SLD, wiring diagram and BOM should be approved by the EIC before fabrication of the Feeder Pillar. \nINCOMING SIDE :\na) 160A Four Pole MCCB of breaking capacity 25/35KA with thermal magnetic setting (L&T) --- 1 no\nb) 200A capacity Bus bar of 4 nos Alu bars on porcelain chairs--- 1 set \n OUTGOING SIDE :\n c) 125A Four Pole MCB (L&T) --- 1 no \nd) 63A Four Pole MCB (L&T) --- 2 nos\ne) 32A Four Pole MCB (L&T) --- 3 nos\nf) Danger board ---- 1 no\ni)DIGITAL AMMETER 96X96 SQ MM FLUSH MOUNTING; 3-Ph. Cl.1.0 (Make: L & T, Model Sl. No. WL131010)\nii)AMMETER SELECTOR SWITCH [OFF-R-Y-B Selection] (Make: KAYCEE or SALZER)\niii)CT 400/5A, CL-1 , VA- 15 TAPE WOUND TYPE (Make : KAPPA)\niv)LED INDICATION LAMP (R/Y/B); 240V AC CUT OUT 22.5 mm (3 Nos. in a Set) (Make: Siemens / L & T, Model GEN NEXT)\nv)6A SP MCB 'C' Curve Br Cap. 10 kA [3 Nos. in a Set] (Make: L & T, Model Sl. No. BB 10060C)\nvi)TIME SWITCH 24HRS. DAILY ANALOG TYPE 3-MODE (Make : Hager / L&T Model : AUTS03ANA00)\nvii)65A 4P CONTACTOR AC - 3 Duty 230V AC Coil + (1NO + 1NC) ADD-ON Aux. CONTACT (Make : LEGRAND Model : 4164 46 & 4168 58)\nviii)Vaishno make 6A 240V Door Limit Switch 1 NC Contact & 1 X 7 watt 240V AC Philips make LED BC Lamp with BC Holder ( all in a set) | BI01010001010000000000000515BI0100001517 | 1 | set |
| 407 | 407 | .OUT DOOR FEEDER PILLAR NO- 2 \nSupply & delivery at site, floor mounted, Double Door Type Feeder Pillar (IP-65/66), fabricated with 10 SWG MS sheet (External) & fixed on MS Angle Iron, totally enclosed, dust and vermin proof, with sloped foof and 4 Nos. Pedestals by 40 mm x 40 mm x 6 mm MS Angle Iron, each having length of 400 mm along with 6 mm thick MS foundation plate, welded at the bottom with holes on each etc. The Legs fitted with supporting Angle Iron Base Frame, are separable.\nThe Feeder Pillar will be powder coated painting. All sorts of inter connections by PVC insulated and unsheathed Copper conductor 'FR' having end finishing with socketing. Main Bus Bar by 4 x (32 mm x 9 mm) pure electrolytic graded Copper Flat on DMC Insulators & the Sub Main Bus Bars are 4 x ( 25 mm x 5 mm), for both 125A MCCBs & the MCBs of rating 80A & 63A would be inter connected by 25 Sq mm & 16 Sqmm PVC insulated and unsheathed 'FR' copper conductor wires etc. complete. The Inner Door behind the first door is of 16 SWG CRCA Sheet Metal. Inside of the Feeder Pillar, the cubicle / compartment type arrangement would be done, having Bus Bar Chamber &Cable Alley and will be incorporated with the following electrical accessories. There will be arrangement of entry/exit of cables through detachable gland plate at the bottom. The over all size of the Feeder Pillars are to be suitable to accomodate the following switching / measuring /indicating / bussing accessories and over all dimension of 1500 mm (W)x1500 mm (H)x 400 mm (D) (Excluding the Leg supports of height of 400 mm). Inscription level plates and should be of anodised /engraved to indicate the capacity /starting /destination of the feeders etc. The F. Pillar, base channels will be painted by powder coating system. There will be continuous 1x(38 mm x 6 mm) GI earth bus at the bottom rear end & would be projected at both sides of the Feeder Pillar. The F. Pillar would have the arrangement of cubicle illumination during open period of the door The GA drawing, SLD, wiring diagram and BOM should be approved by the EIC before fabrication of the Feeder Pillar. \nINCOMING SIDE :\na) 250A Four Pole MCCB of breaking capacity 25/35KA with \n thermal magnetic setting (L&T) --- 1 no\nb) 315A capacity Bus bar of 4 nos Alu bars on porcelain chairs-- 1 set \n OUTGOING SIDE :c) 160A Four Pole MCCB of breaking capacity 25/35KA with \n thermal magnetic setting (L&T) --- 2 nos \nd) 63A Four Pole MCB (L&T) --- 1 no\ne) 32A Four Pole MCB (L&T) --- 1 no \n f) Danger board ---- 1 no)\nDIGITAL AMMETER 96X96 SQ MM FLUSH MOUNTING; 3-Ph. Cl.1.0 (Make: L & T, Model Sl. No. WL131010)\nii)AMMETER SELECTOR SWITCH [OFF-R-Y-B Selection] (Make: KAYCEE or SALZER)\niii)CT 400/5A, CL-1 , VA- 15 TAPE WOUND TYPE (Make : KAPPA)\niv)LED INDICATION LAMP (R/Y/B); 240V AC CUT OUT 22.5 mm (3 Nos. in a Set) (Make: Siemens / L & T, Model GEN NEXT)\nv)6A SP MCB 'C' Curve Br Cap. 10 kA [3 Nos. in a Set] (Make: L & T, Model Sl. No. BB 10060C)\nvi)TIME SWITCH 24HRS. DAILY ANALOG TYPE 3-MODE (Make : Hager / L&T Model : AUTS03ANA00)\nvii)65A 4P CONTACTOR AC - 3 Duty 230V AC Coil + (1NO + 1NC) ADD-ON Aux. CONTACT (Make : LEGRAND Model : 4164 46 & 4168 58)\nviii)Vaishno make 6A 240V Door Limit Switch 1 NC Contact & 1 X 7 watt 240V AC Philips make LED BC Lamp with BC Holder ( all in a set) | BI01010001010000000000000515BI0100001518 | 1 | item |
| 408 | 408 | OUT DOOR FEEDER PILLAR NO- 3\nSupply & delivery at site, floor mounted, Double Door Type Feeder Pillar (IP-65/66), fabricated with 10 SWG MS sheet (External) & fixed on MS Angle Iron, totally enclosed, dust and vermin proof, with sloped foof and 4 Nos. Pedestals by 40 mm x 40 mm x 6 mm MS Angle Iron, each having length of 400 mm along with 6 mm thick MS foundation plate, welded at the bottom with holes on each etc. The Legs fitted with supporting Angle Iron Base Frame, are separable.The Feeder Pillar will be powder coated painting. All sorts of inter connections by PVC insulated and unsheathed Copper conductor 'FR' having end finishing with socketing. Main Bus Bar by 4 x (32 mm x 9 mm) pure electrolytic graded Copper Flat on DMC Insulators & the Sub Main Bus Bars are 4 x ( 25 mm x 5 mm), for both 125A MCCBs & the MCBs of rating 80A & 63A would be inter connected by 25 Sq mm & 16 Sqmm PVC insulated and unsheathed 'FR' copper conductor wires etc. complete. The Inner Door behind the first door is of 16 SWG CRCA Sheet Metal. Inside of the Feeder Pillar, the cubicle / compartment type arrangement would be done, having Bus Bar Chamber &Cable Alley and will be incorporated with the following electrical accessories. There will be arrangement of entry/exit of cables through detachable gland plate at the bottom. The over all size of the Feeder Pillars are to be suitable to accomodate the following switching / measuring /indicating / bussing accessories and over all dimension of 1500 mm (W)x1500 mm (H)x 400 mm (D) (Excluding the Leg supports of height of 400 mm). Inscription level plates and should be of anodised /engraved to indicate the capacity /starting /destination of the feeders etc. The F. Pillar, base channels will be painted by powder coating system. There will be continuous 1x(38 mm x 6 mm) GI earth bus at the bottom rear end & would be projected at both sides of the Feeder Pillar. The F. Pillar would have the arrangement of cubicle illumination during open period of the door The GA drawing, SLD, wiring diagram and BOM should be approved by the EIC before fabrication of the Feeder Pillar. \nINCOMING SIDE :: \na) 315A Four Pole MCCB of breaking capacity 25/35KA with \n thermal magnetic setting (Legrand/Siemens) ---1 no \nb) 400A capacity Bus bar of 4 nos Alu bars on porcelain chairs- 1 set \n OUTGOING SIDE :\nc) 200A Four Pole MCCB of breaking capacity 25/35KA with \n thermal magnetic setting (Legrand/Siemens) --- 1 no \nd) 160A Four Pole MCCB of breaking capacity 25/35KA with \n thermal magnetic setting (Legrand/Siemens) --- 1 no\ne) 63A Four Pole MCB (Legrand/Siemens) --- 1 no\nf) 32A Four Pole MCB (Legrand/Siemens) --- 3 nos\ng) Danger board v --- 1 no\ni)DIGITAL AMMETER 96X96 SQ MM FLUSH MOUNTING; 3-Ph. Cl.1.0 (Make: L & T, Model Sl. No. WL131010)\nii)AMMETER SELECTOR SWITCH [OFF-R-Y-B Selection] (Make: KAYCEE or SALZER)\niii)CT 400/5A, CL-1 , VA- 15 TAPE WOUND TYPE (Make : KAPPA)\niv)LED INDICATION LAMP (R/Y/B); 240V AC CUT OUT 22.5 mm (3 Nos. in a Set) (Make: Siemens / L & T, Model GEN NEXT)\nv)6A SP MCB 'C' Curve Br Cap. 10 kA [3 Nos. in a Set] (Make: L & T, Model Sl. No. BB 10060C)\nvi)TIME SWITCH 24HRS. DAILY ANALOG TYPE 3-MODE (Make : Hager / L&T Model : AUTS03ANA00)\nvii)65A 4P CONTACTOR AC - 3 Duty 230V AC Coil + (1NO + 1NC) ADD-ON Aux. CONTACT (Make : LEGRAND Model : 4164 46 & 4168 58)\nviii)Vaishno make 6A 240V Door Limit Switch 1 NC Contact & 1 X 7 watt 240V AC Philips make LED BC Lamp with BC Holder ( all in a set) | BI01010001010000000000000515BI0100001519 | 1 | item |
| 409 | 409 | OUT DOOR FEEDER NO -4\nSupply & delivery at site, floor mounted, Double Door Type Feeder Pillar (IP-65/66), fabricated with 10 SWG MS sheet (External) & fixed on MS Angle Iron, totally enclosed, dust and vermin proof, with sloped foof and 4 Nos. Pedestals by 40 mm x 40 mm x 6 mm MS Angle Iron, each having length of 400 mm along with 6 mm thick MS foundation plate, welded at the bottom with holes on each etc. The Legs fitted with supporting Angle Iron Base Frame, are separable.\nThe Feeder Pillar will be powder coated painting. All sorts of inter connections by PVC insulated and unsheathed Copper conductor 'FR' having end finishing with socketing. Main Bus Bar by 4 x (32 mm x 9 mm) pure electrolytic graded Copper Flat on DMC Insulators & the Sub Main Bus Bars are 4 x ( 25 mm x 5 mm), for both 125A MCCBs & the MCBs of rating 80A & 63A would be inter connected by 25 Sq mm & 16 Sqmm PVC insulated and unsheathed 'FR' copper conductor wires etc. complete. The Inner Door behind the first door is of 16 SWG CRCA Sheet Metal. Inside of the Feeder Pillar, the cubicle / compartment type arrangement would be done, having Bus Bar Chamber &Cable Alley and will be incorporated with the following electrical accessories. There will be arrangement of entry/exit of cables through detachable gland plate at the bottom. The over all size of the Feeder Pillars are to be suitable to accomodate the following switching / measuring /indicating / bussing accessories and over all dimension of 1500 mm (W)x1500 mm (H)x 400 mm (D) (Excluding the Leg supports of height of 400 mm). Inscription level plates and should be of anodised /engraved to indicate the capacity /starting /destination of the feeders etc. The F. Pillar, base channels will be painted by powder coating system. There will be continuous 1x(38 mm x 6 mm) GI earth bus at the bottom rear end & would be projected at both sides of the Feeder Pillar. The F. Pillar would have the arrangement of cubicle illumination during open period of the door The GA drawing, SLD, wiring diagram and BOM should be approved by the EIC before fabrication of the Feeder Pillar. \nINCOMING SIDE :\na) 250A Four Pole MCCB of breaking capacity 25/35KA with \n thermal magnetic setting (L&T) --- 1 no\nb) 315A capacity Bus bar of 4 nos Alu bars on porcelain chairs-- 1 set \n OUTGOING SIDE :c) 160A Four Pole MCCB of breaking capacity 25/35KA with \n thermal magnetic setting (L&T) --- 2 nos \nd) 63A Four Pole MCB (L&T) --- 3 no\ne) 32A Four Pole MCB (L&T) --- 1 no \n f) Danger board ---- 1 no)\nDIGITAL AMMETER 96X96 SQ MM FLUSH MOUNTING; 3-Ph. Cl.1.0 (Make: L & T, Model Sl. No. WL131010)\nii)AMMETER SELECTOR SWITCH [OFF-R-Y-B Selection] (Make: KAYCEE or SALZER)\niii)CT 400/5A, CL-1 , VA- 15 TAPE WOUND TYPE (Make : KAPPA)\niv)LED INDICATION LAMP (R/Y/B); 240V AC CUT OUT 22.5 mm (3 Nos. in a Set) (Make: Siemens / L & T, Model GEN NEXT)\nv)6A SP MCB 'C' Curve Br Cap. 10 kA [3 Nos. in a Set] (Make: L & T, Model Sl. No. BB 10060C)\nvi)TIME SWITCH 24HRS. DAILY ANALOG TYPE 3-MODE (Make : Hager / L&T Model : AUTS03ANA00)\nvii)65A 4P CONTACTOR AC - 3 Duty 230V AC Coil + (1NO + 1NC) ADD-ON Aux. CONTACT (Make : LEGRAND Model : 4164 46 & 4168 58)\nviii)Vaishno make 6A 240V Door Limit Switch 1 NC Contact & 1 X 7 watt 240V AC Philips make LED BC Lamp with BC Holder ( all in a set) | BI01010001010000000000000515BI0100001520 | 1 | item |
| 410 | 410 | Street Light FEEDER NO -1,2,3\n Supply & delivery at site, floor mounted, Double Door Type Feeder Pillar (IP-65/66), fabricated with 10 SWG MS sheet (External) & fixed on MS Angle Iron, totally enclosed, dust and vermin proof, with sloped foof and 4 Nos. Pedestals by 40 mm x 40 mm x 6 mm MS Angle Iron, each having length of 400 mm along with 6 mm thick MS foundation plate, welded at the bottom with holes on each etc. The Legs fitted with supporting Angle Iron Base Frame, are separable.The Feeder Pillar will be powder coated painting. All sorts of inter connections by PVC insulated and unsheathed Copper conductor 'FR' having end finishing with socketing. Main Bus Bar by 4 x (32 mm x 9 mm) pure electrolytic graded Copper Flat on DMC Insulators & the Sub Main Bus Bars are 4 x ( 25 mm x 5 mm), for both 125A MCCBs & the MCBs of rating 80A & 63A would be inter connected by 25 Sq mm & 16 Sqmm PVC insulated and unsheathed 'FR' copper conductor wires etc. complete. The Inner Door behind the first door is of 16 SWG CRCA Sheet Metal. Inside of the Feeder Pillar, the cubicle / compartment type arrangement would be done, having Bus Bar Chamber &Cable Alley and will be incorporated with the following electrical accessories. There will be arrangement of entry/exit of cables through detachable gland plate at the bottom. The over all size of the Feeder Pillars are to be suitable to accomodate the following switching / measuring /indicating / bussing accessories and over all dimension of 1500 mm (W)x1500 mm (H)x 400 mm (D) (Excluding the Leg supports of height of 400 mm). Inscription level plates and should be of anodised /engraved to indicate the capacity /starting /destination of the feeders etc. The F. Pillar, base channels will be painted by powder coating system. There will be continuous 1x(38 mm x 6 mm) GI earth bus at the bottom rear end & would be projected at both sides of the Feeder Pillar. The F. Pillar would have the arrangement of cubicle illumination during open period of the door The GA drawing, SLD, wiring diagram and BOM should be approved by the EIC before fabrication of the Feeder Pillar. Supply & installation of 4 mm thick M.S. out door type Feeder Pillar Box having both side ventilation louvers with inclined roof of size (1050 x 900 x 400 mm) having hinged door & mechanical locking arrangement suitably grouted on 250mm masonary platform 450 below G.L. & 600mm above G.L. plastering & neatly cemented finish. The Feeder pillar box should comprise double door type cubicle panel inside it, fabricated by 3mm thick M.S. sheet with necessary slot for incomming outing MCCB/MCBs bus bar & necessary interconnection with suitable capacity PVC insulated copper wire duly socketed at both end comprising of the following control device.\na) 100A Four Pole MCB (Legrand/Siemens) --- 1 no\nb)125A capacity Bus bar of 4 nos Alu bars on porcelain chairs--- 1 set \n c) 32A Four Pole MCB (Legrand/Siemens) --- 6 nos \nd Electronic time switch (daily)(make Legrand/L&T) with \n 32A four pole power contractor with 240V magnet coil &\n by-pass switching arrangement (Make L&T/Siemens) ---- 3 sets\ne) Danger board ---- 1 no\nDIGITAL AMMETER 96X96 SQ MM FLUSH MOUNTING; 3-Ph. Cl.1.0 (Make: L & T, Model Sl. No. WL131010)\nii)AMMETER SELECTOR SWITCH [OFF-R-Y-B Selection] (Make: KAYCEE or SALZER)\niii)CT 400/5A, CL-1 , VA- 15 TAPE WOUND TYPE (Make : KAPPA)\niv)LED INDICATION LAMP (R/Y/B); 240V AC CUT OUT 22.5 mm (3 Nos. in a Set) (Make: Siemens / L & T, Model GEN NEXT)\nv)6A SP MCB 'C' Curve Br Cap. 10 kA [3 Nos. in a Set] (Make: L & T, Model Sl. No. BB 10060C)\nvi)TIME SWITCH 24HRS. DAILY ANALOG TYPE 3-MODE (Make : Hager / L&T Model : AUTS03ANA00)\nvii)65A 4P CONTACTOR AC - 3 Duty 230V AC Coil + (1NO + 1NC) ADD-ON Aux. CONTACT (Make : LEGRAND Model : 4164 46 & 4168 58)\nviii)Vaishno make 6A 240V Door Limit Switch 1 NC Contact & 1 X 7 watt 240V AC Philips make LED BC Lamp with BC Holder ( all in a set)\nThe above Pillar box to be installed on brick cement rectangulr plat form 600mm below the GL & 600mm Above GL duly plastered & neatly cemnted finish | BI01010001010000000000000515BI0100001521 | 3 | item |
| 411 | 411 | Supply & delivery of 150mm borewell 3ph. 440V 15 H.P(11KW) 9 stage . Sub-Mersible Pump-Motor set of approved make of 80mm dia outlet(Make - Kirloskar cat no. KS6F-1509R, D12761007153/KSB) | BI01010001010000000000000515BI0100001522 | 2 | Set |
| 412 | 412 | Supply & delivery of 150mm borewell 3ph. 440V 10 H.P(7.5KW) 10 stage . Sub-Mersible Pump-Motor set of approved make of 80mm dia outlet(Make - Kirloskar cat no. KS6EA-1010R, D12761505153/KSB) | BI01010001010000000000000515BI0100001523 | 2 | set |
| 413 | 413 | Supply & Fixing of control panel suitable for 3-Phase 10 HP(7.5 KW) Submersible Pump motor set comprising of FASD starter,Relay Range(6 - 10) to be fixed on wall incl making connection & necy. earthing attachment.\n (Make L&T Type MU-G15 FASD [HSN Code 8536]] Cat no. CS94091SOVO/Crompton/KSB) | BI01010001010000000000000515BI0100001524 | 2 | set |
| 414 | 414 | Supply & Fixing of control panel suitable for 3-Phase 15 HP(11 KW) Submersible Pump motor set comprising of FASD starter,Relay Range(9 - 14),&Coil Voltage of 415 V to be fixed on wall incl making connection & necy. earthing attachment.\n (Make L&T Type MU-G20 FASD (With Wideband Coil) [HSN Code 8536] Cat no. SS95984DOAO/Crompton/KSB) | BI01010001010000000000000515BI0100001525 | 2 | set |
| 415 | 415 | Supply & Laying 3 core 4 sqmm flat submersible cable (Mescab/Finolex/Havells) | BI01010001010000000000000515BI0100001526 | 240 | mtr |
| 416 | 416 | Supply & Laying 3 core 2.5 sqmm flat submersible cable (Mescab/Finolex/Havells) | BI01010001010000000000000515BI0100001527 | 240 | mtr |
| 417 | 417 | Labour charge for Testing & Lowering the submersible Pump motor set with submersible cable along with the column pipes into the tube well after socketing the column pipes step by step including arrangement of tripod, chain pully & tools & Tackles & providing suitable manpower to satisfactory operation.\n | BI01010001010000000000000515BI0100001528 | 6 | set. |
| 418 | 418 | Supply & installation of 80 mm dia G.I. pipe (Make TATA-M) having heavy duty G.I. socket/elbow (TATA) incl cutting & threading as required a) Make TATA Medium (For Vertical column pipe & upto header).(Including 12% GST)\n Sanitary Plumbing Schedule (A)-(II) G.I. pipe & fittings item no -1(f) (ii)\n | BI01010001010000000000000515BI0100001529 | 200 | mtr |
| 419 | 419 | Supplying, fitting and fixing gunmetal 80 mm dia wheel valve of approved brand and make tested to 21 kg per sq. cm. (for Header only).(Including 12% GST)\nSanitary Plumbing Schedule(A)-(II) G.I. PIPE WORKS AND FITTINGS\n | BI01010001010000000000000515BI0100001530 | 12 | each |
| 420 | 420 | Supplying, fitting and fixing check valve G.M. tested to 21 kg per\nsq. cm.Cast Steel Non Return Valve 3 Inch DIA\n(GeM Price List) | BI01010001010000000000000515BI0100001531 | 6 | each |
| 421 | 421 | Supply Of MS 9M,113 KG weight of Designation 410-SP-28 Sweged and Welded Steel tubular Poles as per IS-2713-1980 With Single Arm Bracket made of 40 mm Dia 1.5 Mtr Long Including MS cap (Calcutta Poles &Tubes Co/Utkarsh/Banshal)\n | BI01010001010000000000000515BI0100001532 | 45 | each |
| 422 | 422 | Supply delivery at site on foundation, commissioning of 100 KVA 415V, 50HZ, 3ph silent new DG Set, comprising of Engine, alternator, Manual Control Panel, Base frame, Fuel tank, Battery, CPCB - II approved Engine & Acoustic Enclosure. Make ( Jakson/ Kirloskar/Ashok layland Koel Green) as approved EIC. | BI01010001010000000000000515BI0100001533 | 2 | set |
| 423 | 423 | Installation, testing & commissioning with full fuel tank of the above D.G. set to satisfactory operation. | BI01010001010000000000000515BI0100001534 | 2 | job |
AI Tender Summary
Tender Timeline
Jun 14, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 09, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender