|
| 1 | Attending and rectification of EA 7.5 KVA to 62.5 KVA set faults including providing minor spares if reqd such as connecting copper wires, removing air from fuel pump, control fuse, ferrules, lugs i/c minor works etc etc alongwith testing & commissioning etc. in URBAN site complete as required ( within vicinity of 25 Kms.) (Item will be measured on submission of visit report duly signed by BSNL authority and allowed atonce per site per fault) (Note:- For subsequent visit to attend the DG set to provide the items hereunder will not be paid separately. It is assumed that all items as below shall be carried out by firm in first visit only) |
| 2 | Attending and rectification of EA 7.5 KVA to 62.5 KVA set faults including providing minor spares if reqd such asconnecting copper wires, removing air from fuel pump, control fuse, ferrules, lugs i/c minor works etc etcalongwith testing & commissioning etc. in RURAL site complete as required beyond25 Kms. (Item will be measured on submission of visit report duly signed by BSNL authority and allowed atonce per site per fault) (Note:- For subsequent visit to attend the DG set to provide the items hereunder will not be paid separately. It is assumed that all items as below shall be carried out by firm in first visit only) |
| 3 | Carrying out \"B\" Check servicing of following capacity E/A sets located at various T.E. Bldg / BTSunder BSNL Electrical Sub-Division, Dombivali including replacement of old engine oil, fuel filter, lubricating oil filter etc. by new as per manufactures recommendation including arranging vehicle, transportation, manpower, tools and tackles, testing etc. as required. (Oil, filters shall be manufacturerrecommonded specs) (Note: This item includes visit charges, nothing extra on this account shall be paid) |
| 4 | 7.5 KVA /10 KVA ( KOEL) |
| 5 | 15/20 KVA (KOEL/M&M) |
| 6 | 32.5 KVA ( KOEL/GREAVES ) |
| 7 | 45/50 KVA (KOEL/CUMMINS ) |
| 8 | 62.5 KVA ( KOEL/GREAVES/CUMMINS) |
| 9 | Supplying & filling of coolent in radiator of water cooled EA set etc as required. |
| 10 | Supplying & fixing following spare parts alongwith removing of old items etc.complete as required.( Make- Recommended by manufacture/BSNL makes only. ) (Note :- The agency shall be consideredsuitable creditfor recovered spareswhile quoting rates ) |
| 11 | Above 7.5 KVA TO 32.5 KVA |
| 12 | Repairs of self starteri/c replacement of spares / winding etc as required |
| 13 | Repairs of charging alternator i/c replacement of spares / winding etc as required |
| 14 | Fuel pipe steel braded with banjo bolt( feed pump to fuel filter ) |
| 15 | Fuel pipesteel braded with banjo bolt ( Pre filterto tank unit) |
| 16 | Fuel pipesteel braded with banjo bolt ( Fuel filter to FIP ) |
| 17 | Automatic voltage regulator (AVR) |
| 18 | Pump caliberation only from authorised dealer with test report |
| 19 | V belt ( A46) |
| 20 | V belt ( A56) |
| 21 | Above 32.5 KVA TO 62.5 KVA |
| 22 | Repairs of self starteri/c replacement of spares / winding etc as required |
| 23 | Repairs of charging alternator i/c replacement of spares / winding etc as required |
| 24 | Fuel pipe steel braded with banjo bolt( feed pump to fuel filter ) |
| 25 | Fuel pipesteel braded with banjo bolt ( Pre filterto tank unit) |
| 26 | Fuel pipesteel braded with banjo bolt ( Fuel filter to FIP ) |
| 27 | Automatic voltage regulator (AVR) |
| 28 | RepairingofEngine Alternator setsby supplying & fixing following spare parts alongwith removing of old units etc.complete as required.( Make- Recommended by manufacture/BSNL makes only.) |
| 29 | SMPS 12 volt, 10 Amp Battery Charger |
| 30 | 88 Ah, 12 volt Battery |
| 31 | 130 Ah, 12 volt Battery |
| 32 | 15 W 40 Lubricating oil for topping up in EA set( Only recommeded make ) |
| 33 | Set of end socket with copper lugs for DG starting battery |
| 34 | S/F of 2 nos 35 sqmm copper flexible lead (approx.1.0 Mtr) for DG starting battery |
| 35 | ON/OFF push button |
| 36 | Starting switch with key |
| 37 | Radiator Hose kit |
| 38 | Mains/DG contactor |
| 39 | Stop solenoid |
| 40 | 63 amps. ratings , TPN MCB, “C” curve,10 KA breaking capacity |
| 41 | Overhauling & Reconditioning of radiator of up to 32.5KVA DGset which includes Dismantling the complete radiator fanassembly from the engine, dismantling radiator assembly, transporting to workshop, pressure testing, tracing the leakage in the tube, attending & repairingof leakages, brazing, welding damaged sections, cleaning of all fins with air pressure, cleaning of rusted portion of radiator, Servcing & cleaning of whole radiator, providing anti rust coating, hydraulic pressure testing,and refixing of radiator assembly , tesing & trial run of DG set etc. complete asrequired. |
| 42 | Overhauling & Reconditioning of radiator of above 32.5 KVA to62.5 KVA DGset which includes Dismantling the complete radiator fanassembly from the engine, dismantling radiator assembly, transporting to workshop, pressure testing, tracing the leakage in the tube, attending & repairingof leakages, brazing, welding damaged sections, cleaning of all fins with air pressure, cleaning of rusted portion of radiator, Servcing & cleaning of whole radiator, providing anti rust coating, hydraulic pressure testing,and refixing of radiator assembly , tesing & trial run of DG set etc. complete asrequired. |
| 43 | SHII ( Credit for dismantailed material) |
| 44 | Suitable credit to the old dismantled battery of following capacity |
| 45 | Above 88 AH to 130 AH |
