Periodic Maintenance Link Road From Mandher Khurd To Mandher Kalan Drrp No . Hp0403vr0030 ( Amp 2021-22 Pmgsy Road ) Providing And Laying Wbm G-Ii For Profile Correction And 2 Cm Thick Premix Carpet With Seal Coat Km 0/0 To 0/915 ) .
Tender Overview
Project Description
Periodic Maintenance Link Road From Mandher Khurd To Mandher Kalan Drrp No . Hp0403vr0030 ( Amp 2021-22 Pmgsy Road ) Providing And Laying Wbm G-Ii For Profile Correction And 2 Cm Thick Premix Carpet With Seal Coat Km 0/0 To 0/915 ) .
BOQ
| Name of Work: Periodic Maintenance Link road from Mandher Khurd to Mandher Kalan DRRP No HP0403VR030 (AMP 2021-22 PMGSY roads)(SH: Providing and Laying WBM G-II for profile correction and 2 cm Thick premix carpet with seal coat Km 0/00 to 0/915) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing laying spreading and compacting by mechanical means stone aggregate of size 63mm to 45mm (sixty three millimetre to forty five millimetre) Grading-II to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (Eighty desh Hundred) K.N. static roller in stages to proper grade and camber, applying and brooming, stone screening type-B of size 11.2mm (eleven decimal two millimetre) nominal size at the rate of 0.20 cubic metre (zero decimal two zero cubic metre) per ten square metre and binding material at the rate of 0.06 cubic metre (zero decimal zero six) cubic metre per ten square metre to fill up the intersitices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications clause 405 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including Royality, Malkhana, Octroi, toll tax, or any other taxes imposed by the Government excluding GST. | 21.98 | Per Cubic Metre | |
| 2 | 2 | Providing and applying primer coat with bitumen emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface and spraying primer @ 0.85 Kg. /Sqm. ( zero decimal eight five kilogram per square metre) using emulsion by mechanical means as per M.O.R.D. technical specifications clause 502 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including Royality, Malkhana, Octroi, toll tax, or any other taxes imposed by the Government excluding GST. | 293.03 | Per square metre | |
| 3 | 3 | Providing and applying tack coat with bitumen emulsion (RS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.275Kg per Sqm (Zero decimal two seven five kilogram) per square metre using mechanical means on granular surface by mechnical means as per MORD Technical specification clause 503, and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, toll tax, or any other taxes imposed by the Government excluding GST. | 293.03 | Per square metre | |
| 4 | 4 | Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.225Kg per Sqm (Zero decimal two two five kilogram) per square metre on the prepared bituminous surface cleaned with Hydraulic broom bitumen emulsion on bitumenious surface complete as per MORD Technical specification clause 503, and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, toll tax, or any other taxes imposed by the Government excluding GST.\n | 2637.26 | Per square metre | |
| 5 | 5 | Providing laying and rolling by mechnical means of open grades premix carpet of 20mm ( twenty millimeter) thickness composed of 13.2mm ( thirteen decimal two millimeter) and 11.20 ( eleven decimal twenty millimetre) aggregate mixed in the ratio 2:1 (two is to one) and @ 0.27 cum (zero decimal twenty seven cubic metres) mixed with bitumen VG-10 (ten) @ 14.60 kg (fourteen point sixty kilogram) per ten square metre of road surface required line grade and level to serve as wearing course on a previously prepared base, including heating binder and aggregate in plant 30/40 ton capacity per hour transporting mixed material with tippers and laying with pavers finisher to the required grade to be followed by seal coat of type-B and camber and rolling with a three Wheel 80-100 KN static road roller to required level and grade as per MORD technical specifications clause No. 506 and as per directions of Engineer-In-Charge including hauling / carriage of materials to various location through all modes of transporation in all leads, lift and other incidental complete in all respect.The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. | 2930.29 | Per square metre | |
| 6 | 6 | Providing and laying seal coat sealing the voids in a bituminous surface laid to specified level grade and cross fall using type-B as per M.O.R.D. technical specification clause 508 premixd with 6.8 kg (six point eight) kilogram VG-10 (ten) bitumen 0.06 (zero point zero six) cubic metre of fine aggregate per 10 sqm (ten square metre) heated in mini hot mix plant and laying of mixed material and rolling with power road roller 8-10 (eight to te capacity) and as per diretion of Engineer-In-Charge including hauling / carriage of materials to various location through all modes of transporation in all leads, lift and other incidental complete in all respect.The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. | 2930.29 | Per square metre |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender