Various Electricity Line Works In Deposit Scheme In Area Of Edd-I Hapur-1 For Various Electricity Line Works, In Deposit Scheme, In The Jurisdiction Of Edd-I Hapur, Under Edc, Hapur. ( As Per Sanctioned Estimate ) ( 1-Releasing New Connection Of 100Kw., To Csc, Jila Chikitsalya, Site-Jasroopnagar Hapur, 2-Releasing Of 15Hp New Connection To Adhishasi Adhikari, Nagar Palika Parisad Hapur Site-Modinagar Road Hapur. 3-Releasing Of 32Hp New Connection To Adhishasi Adhikari, Nagar Palika Parisad Hapur Site-Ashok Nagar Garh Road Hapur. 1.01 Carriage Of Line Material ( Like 11Kv Xlpe Cable And 11Kv Cable Jointing Kit Etc. ) From Electricity Store Center, Hapur To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road. 1.02 Carriage Of St Pole 11 Mtrs. Long From Electricity Store Center, Hapur / J.E. Store To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road. 1.03 Carriage Of 250Kva T / F From Electricity Store Center, Hapur To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road. 1.04 Carriage Of 25 / 63Kva T / F From Electricity Store Center, Hapur To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road. 1.05 Carriage Of 11Kv Ct / Pt Unit From Electricity Store Center, Hapur To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road. 1.06 Carriage Of 11Kv Vcb From Electricity Store Center, Hapur To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road. 1.07 Carriage Of Metering Cubical Set Complete, From Electricity Store Center, Hapur To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road. 1.08 Erection & Fixing Of St Pole 11 Mtr. Long In 11 Kv Line After Digging Of Suitable Pits Including Fixing Of Requisite Accessories As Per Respo Drawing / Norms By Providing F-Bracket Made Of M.S. Flat Of Size 50X6 Mm, Cross Arm Holding Clamps Made Of M.S. Flat Of Size 50X6 Mm With Proper Size Nuts And Bolts. 1.09 Fabrication, Erection And Fixing Of Double Pole On St Pole 11 Mtr. Long With Fixing Of M.S. Top & Dropper Channel, M.S. S / S Angle, E-Bracket, 11 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting As Per Respo Drawing / Norms By Providing Top And Dropper Clamps Made Of M.S. Flat Of Size 50X6 Mm With Proper Size Nuts And Bolts. 1.1 Mounting, Placing Of Transformers On Plinth By Help Of Crain / Mannual Labour And Connecting From Lt / Ht Side Of 11Kv, 250Kva T / F As Per Respo Norms. 1.11 Mounting, Placing Of Transformers And Connecting From Lt / Ht Side Of 25 / 63Kva T / F As Per Respo Norms. 1.12 Mounting, Placing And Connecting From Lt / Ht Side Of 11Kv, Ct / Pt Units As Per Respo Norms. 1.13 Laying Of 11Kv Xlpe Cable 3X70-3X120sqmm And Completion Work Properly As Per Respo / Norms. 1.14 Laying Of Lt Cable 3.5X400sqmm And Completion Work Properly As Per Respo / Norms. 1.15 Making And Filling Of 11Kv Cable Jointing Kit, After Duly Plumbing And Taping Of Suitable Xlpe Cable, Providing, Fixing And Crimping Of Proper Size Good Quality Lugs, Including Cost Of Lugs And Tape Etc., As Per Respo Norms. 1.16 Installation Of 11Kv Metering Cubical Completion Of Properly Work As Per Respo Norms. 1.17 Installation Of 11Kv Vcb Completion Of Properly Work As Per Respo Norms. 1.18 Fabrication & Fixing Of T-Channel On Pole By Providing Holding Clamps, F-Clamps & Proper Size Nuts & Bolts, As Per Respo / Norms. 1.19 Grouting & Fixing Of Stay Rods ( 20X1800 ) Mm Including All Work Of Excavation, Cement Concrete In Size ( 0.60X0.60X0.30 ) M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing / Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops. 1.2 Earthing Of Supports With Ms Earth Rod Of ( 20X2500 ) Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs As Per Respo Drawing / Norms By Providing Proper Size Nuts & Bolts. 1.21 Grouting Of Following Supports In Cc 1:4:8 ( Cement, Sand & 40Mm Brick Ballast ) Grouting Will Be Done In The Block Of Size ( 450X450 ) Mm X1 / 6Th Of Full Length Of The Support, Up To Ground Level, 300Mm Plinth Above The Ground Level With Cc 1:3:6 ( Cement, Core Sand And Stone Grit ) With Mufting As Per Drawing, Work Includes Back Filling & Proper Ramming By Providing All Required Grouting Materials. 1.22 Construction Of T / F Plinth Suitable For 250Kva T / F ( Size Of 2 X 2 X 1.5 Mt. ) As Per Drawing, Cc Work In Foundation In Ratio 1:4:8 ( Cement, Sand & Brick Ballast ) . Ist Class Brick Work In Side Walls Cc Ratio Of 1:4 ( Cement & Fine Sand ) . 12Mm Thick Plaster In Ratio 1:4 ( Cement & Fine Sand ) . The Rcc Work On Top Of Plinth In Ratio 1:2:4 After Duly Filling Of Brick Ballast Inside The Plinth & Ramming The Same, Including Cost Of All Material & Labour. 1.23 Making Of Wiremesh Fancing Suitable For 250Kva Transformers ( Size Of 2 X 2 X1.5 ) Wiremesh And Angle 65X65x6mm As Per Drawing Respo / Norms, Including Cost Of All Material And Labour. 1.24 Chemical Earthing Of Equipment The Ground Surface Where It Will Be Bolted To The M.S. Earth Strip For Connection The Earth Strip Will Be Welded To The Earthing And Neutral Support, As Per Respo / Norms. 1.25 Laying , Stringing And Final Sagging Of Acsr Weasel Conductor After Binding From Insulator, As Per Respo / Drawing Norms. 1.26 Jumpering Work Properly As Per Respo / Norms.
