E-Tender Notice For Procurement Of Machinery And Equipments For Electrician Trade, Sainj-Himachal Pradesh

E-Tender Notice For Procurement Of Machinery And Equipments For Electrician Trade -. Electrician Items Nnote:- N1. All Motors / Generators Should Be Of Crompton / Abb / Kirloskar / Benn / Seimen Make. N2. Panel Requirements: Nall Panels Should Be Enclosed In Rack Type Aluminum Extruded Channel Based With Removable Modules Cabinet. Front Panels Should Be Built With High Class Insulated Glass Epoxy Based With Well Screen Printed Circuits And Symbols. Instruction Manual Should Be There For Complete Working Operations. Single / Three Phase Power Indication Should Be With 25Mm Colored Indicators. Removable Required Nos. Of Patch Cords 4Mm ( Heavy Duty ) For Complete Working Operation. High Voltage Test Points Should Be Provided With 4Mm Safety Sockets To Avoid Direct Shock. Protection Should Be With Emergency Stop To Immediate Termination Of Working Operation In Case Of Emergency Conditions. Short Circuit Protection With 4 Pole Industrial Mcb With Appropriate Current Rating. All The Instruments Should Be Of Latest Technology With Isi Mark. All Ammeter, Voltmeters Provided On Panels Should Be Digital. N3. All Instruments And Tools Supplied Should Be Of Best In Qulity, Isi Marked And Of Reputed Manufacurers / Oem. N4. All The Winded Insruments And All Conductors Should Be Of Good Quality Copper 2 Pulley Puller With 3 Legs ( 300 Mm ) 3 Bearing Puller ( Outside ) 4 Scissors Blade , Ss ( 200 Mm ) 5 Wire Cutter And Stripper 6 Divider , 150 Mm Spring Type 7 Gauge, Wire Imperial Stainlees Steel Marked In Swg & Mm, Wire Gauge- Metric 8 Oil Can , 250Ml 9 Cut Out Relays 16A, 440V 10 Hydrometer , 0-6 Mm Capacity 11 Hand Drill Machine 12 Load Bank ( Lamp / Heater Type ) , 6 Kw Three Phase 13 Laboratory Type Induction Coil, 1000 W 14 Thermometer Digital , 0 C- 150 C 15 Earth Plate, 60Cm *60Cm*3.15Mm Copper Plate 60Cm*60Cm*6Mm Gi Plate ( Each ) 16 Earth Electrode, Primary Electrode 2100*28*3.25Mm Secondary Cu Strip 20*25Mm 17 Mccb 18 Elcb And Rccb, 25Amps, Double Pole And 25Amps, Double Pole, 1 / N 30 Ma ( Each ) 19 Fuses, Hrc Glass And Rewire Type ( Each ) 20 Rheostat ( Sliding Type ) , 0-300 Ohm, 2Amp 21 Rheostat ( Sliding Type ) , 0-25 Ohm, 2 Amp 22 Rheostat ( Sliding Type ) , 0-1 Ohm, 10 Amp 23 Capaictor Electroiytic 24 Capaictor Ceramic 25 Capaictor Polyester Film 26 Capaictor Variable 27 Capaictor Dual Run 28 Various Electronic Components , Resistors, Diode, Transistor, Ujt, Fet, Scr, Diac, Traic, Igbt, Small Transformer Etc. ( Each ) 29 Hp Mercury Vapor Lamp 250 Watt, 220 V Ac 30 High- Pressure Sodium Lamp 150 W, 220V Ac 31 Low-Pressure Sodium Lamp 35 W 32 Led 20 W 33 Plug Socket, 230V 5 A 34 Piano Switch, 230V 5 A 35 Lamp Holder, 230V 5 A 36 Twisted Pair Cable 37 Non- Metallic Sheathed Cable 38 Underground Feeder Cable 39 Ribbon Cable 40 Metallic Sheathed Cable 41 Multi N- Conductor Cable 42 Coaxial Cable 43 Direct- Buried Cable 44 Bus Bar With Brackets, 1 Meter Each 45 Rubber Mat, 2 * 4 * 1 46 Electrician Helmet , Yellow Colour 47 Rcc Pole With Accessories ( Ms Angle Iron, C Clamp, Stay Insulator Etc. ) And Materials, 6 Meter 48 Safety Belt, Standerd Quality 49 Ohm Meter;Series Type & Shunt Type , Portable Box Type ( Each ) , 50 / 2000-Ohm Analog 50 Digital Multi Meter, Dc 200Mv -1000V, 0 – 10A & Ac 200Mv- 750V , 0-10A, Resistance 0-20 Mo And 3 1 / 2 Digit 51 A.C Voltmeter M.I. Analog Portable Box Type Housed In Bakelite Case , Multi Range 75V-150V-300V-600V 52 Milli Voltmeter Centre Zero Analog, Protable Box Type Housed In Bakelite Case, 100-0-100 Mv 53 Ammeter Mc Analog, Portable Box Type Housed In Bakelite Case ( Each ) , 0-500Ma, 0-5 A, 0-25 A 54 Ammeter Mi Analog, Portable Box Type Housed In Bakelite Case ( Each ) , 0-1 A, 0-5 A, 0-25 A 55 Kilo Wattmeter Analog ( Each ) , 0-1.5-3Kw, Pressure Coil Rating- 240V / 440V, Current Rating-5A / 10A Analoge, Portable Type Housed In Bakelite Case 56 Digital Wattmeter, 230 V, 1 Kw, 50 Hz 57 A.C. Energy Meter, Single Phase, 10 A, 240 V Induction Type 58 A.C. Energy Meter, Three Phase, 15 A, 440V Inducation Type 59 Power Factor Meter Digital , 440V, 20 A, Three Phase Portable Box Type 60 Frequency Meter, 45 To 55 Hz 61 Lux Meter , Lux Meter Lcd Read Out 0.05 To 7000 Lumens With Battery. 62 Tachometer , Analog Type-10000 Rpm 63 Tong Tester / Clamp Meter, 0-100 A ( Ditital Type ) 64 Megger , Analog -500 V 65 Wheat Stone Bridge With Galvanometer And Battery 66 Phase Sequence Indicator, 3 Phase, 415 V 67 Resistance Type Starter , For A.C Motors Of 2 To 5 H.P 68 Star Delta Starter – Semi Automatic Starter , For A.C Motor For 2-5 Hp 69 Star Delta Starter – Fully Automatic, For A.C Motors Of 2 To 5 H.P 70 Star Delta Starter - Soft Starter, For A.C Motors Of 2 To 5 H.P 71 Temperature Controlled Soldring Iron, 50 Watt , 230 Volt 72 Discrete Component Trainer , Discrete Component ( For Diode And Transistor Circuit ) With Regulated Power Supply +5, 0- 5 V, +12 , 0-12 V 73 Battery Charger , 0-6-9-12-24-48V, 30Amp 74 Soler Panel With Battery , 18 Watt 75 D.C Compound Generator With Control Pannel Including Fitted Rheostat , Voltmeter , Ammerter And Breaker , Dc Compound Generator With Control Panel Including Fitted Rehostat , Voltmeter , Ammeter And Breaker, 2.5 Kw, 220 V And 3Phase Squirrel Cage Induction Motor, 5Hp_ 440 Volt With Control Panel &Star Detta Starter 76 Motor Generator ( Dc To Ac ) Set Consisting Of - Shunt Motor With Starting Compensator And Switch Directly Coupled To Ac Generator With Exciter And Switch Board Mounted With Regulator, Breaker, Ammeter, Voltmeter Frequency Meter, Knife Blade Switch And Fuses Etc. Set Complete With Cast Iron Bed Plate, Fixing Bolts, Foundation Bolts And Flexible Coupling. Shunt Motor Rating : 5 Hp, 440V Ac Ngenerator Rating : 3-Phase, 4 Wire, N3.5 Kva, 400 / 230 Volts, 0.8 Pf, N50cycles 77 Motor Generator ( Dc To Ac ) Set Consisting Of - Shunt Motor With Starting Compensator And Switch Directly Coupled To Ac Generator With Exciter And Switch Board Mounted With Regulator, Breaker, Ammeter, Voltmeter Frequency Meter, Knife Blade Switch And Fuses Etc. Set Complete With Cast Iron Bed Plate, Fixing Bolts, Foundation Bolts And Flexible Coupling. Shunt Motor Rating : 5 Hp, 440V Ac Ngenerator Rating : 3-Phase, 4 Wire, N3.5 Kva, 400 / 230 Volts, 0.8 Pf, N50cycles 78 Universal Motor With Starter / Switch, 240 V, 50 Hz, 1 Hp 79 Thyristor / Igbt Controlled D.C. Motor Drive With Tacho-Generator Feedback Arrangement , 1 Hp 80 Thyristor / Igbt Controlled A.C. Motor Drive With Vvvf Control 3 Phase, 2 Hp 81 Three Phase Transformer Shell Type Oil Cooled With Delta / Star , 3 Kva 415 / 240V 50 Hz 82 Pillar Electric Drill Machine Motorized , 12-20Mm Capacity , 1Hp, 440 V , 3 Phase Induction 83 Motorised Bench Grinder , 1Hp, 3 Phase , 440V With Dol Starter Double Side 84 A.C. Series Type Motor, 1 Hp, 240 V, 50 Hz 85 Single Phase Capacitor Motor With Nstarter Switch, 1 Hp, 240 V, 50 Hz 86 Manual Motor Coil Winding Machine , With Step Arbor 87 Primary Current Injection Set, 220V, 50Hz, 1-$ Ouput Current 200A ( Min ) With Time 88 Metal Rack , 100Cm*150Cm*45Cm 89 Fire Buckets , Standard Size

Refer document

INR 27776.0 /-

Refer document

Name of Work: E-TENDER FOR PROCUREMENT OF Electrician TRADE EQUIPMENTS
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Electrician items\nNote:- \n1. All Motors/Generators should be of Crompton/ ABB/ Kirloskar/ Benn/ Seimen make.\n2. Panel Requirements:\nAll panels should be enclosed in Rack Type Aluminum Extruded channel based with removable Modules cabinet. Front panels should be built with high class insulated Glass epoxy based with well screen printed circuits and symbols. Instruction manual should be there for complete working operations. Single/Three Phase Power Indication should be with 25mm Colored Indicators. Removable required nos. of Patch Cords 4mm (Heavy Duty) for complete working operation. High Voltage Test Points should be provided with 4mm Safety Sockets to avoid direct shock. Protection should be with Emergency Stop to immediate termination of working operation in case of emergency conditions. Short Circuit protection with 4 Pole industrial MCB with appropriate current rating. All the instruments should be of latest technology with ISI mark. All Ammeter, Voltmeters provided on panels should be digital.\n3. All Instruments and tools supplied should be of best in qulity, ISI marked and of reputed manufacurers/OEM.\n4. All the winded insruments and all conductors should be of Good Quality Copper.
2	1.01	Pulley Puller with 3 legs (300 MM)	item1	1	Nos
3	1.02	Bearing Puller ( outside)	item2	1	Nos
4	1.03	Scissors blade , SS (200 MM)	item3	4	Nos
5	1.04	Wire Cutter and Stripper	item4	3	Nos
6	1.05	Divider ,150 MM SPRING TYPE	item5	2	Nos
7	1.06	Gauge, wire imperial stainlees steel marked in SWG & mm, Wire Gauge- Metric	item6	2	set each
8	1.07	Oil Can ,250ML	item7	2	Nos
9	1.08	Cut out Relays 16A, 440V	item8	2	Nos
10	1.09	Hydrometer ,0-6 mm capacity	item9	1	Nos
11	1.1	Hand Drill Machine	item10	1	Nos
12	1.11	Load bank (lamp / heater Type ),6 KW Three phase	item11	1	Nos
13	1.12	Laboratory Type Induction Coil, 1000 W	item12	1	Nos
14	1.13	Thermometer Digital ,0 C- 150 C	item13	1	Nos
15	1.14	Earth Plate, 60cm *60cm*3.15mm Copper Plate 60cm*60cm*6mm Gi Plate (Each)	item14	1	Each
16	1.15	Earth Electrode, Primary Electrode 2100*28*3.25mm Secondary Cu strip 20*25mm	item15	1	Nos
17	1.16	MCCB	item16	1	Nos
18	1.17	ELCB and RCCB, 25Amps, double pole and 25Amps, double pole,1/n 30 mA(Each)	item17	1	Each
19	1.18	Fuses, HRC Glass and rewire type (Each)	item18	4	Each
20	1.19	Rheostat (Sliding type), 0-300 Ohm, 2Amp	item19	1	Nos
21	1.2	Rheostat (Sliding type), 0-25 Ohm, 2 Amp	item20	1	Nos
22	1.21	Rheostat (Sliding type), 0-1 Ohm, 10 Amp	item21	1	Nos
23	1.22	Capaictor Electroiytic	item22	1	Nos
24	1.23	Capaictor Ceramic	item23	1	Nos
25	1.24	Capaictor Polyester film	item24	1	Nos
26	1.25	Capaictor Variable	item25	1	Nos
27	1.26	Capaictor Dual run	item26	1	Nos
28	1.27	Various Electronic components ,Resistors, Diode, Transistor, UJT, FET, SCR, DIAC, TRAIC, IGBT, Small transformer etc.(Each)	item27	1	Each
29	1.28	HP mercury vapor Lamp 250 Watt, 220 V ac	item28	1	Nos
30	1.29	High- pressure sodium Lamp 150 W,220V ac	item29	1	Nos
31	1.3	Low-pressure sodium Lamp 35 W	item30	1	Nos
32	1.31	LED 20 W	item31	1	Nos
33	1.32	Plug socket, 230V 5 A	item32	2	Nos
34	1.33	Piano Switch,230V 5 A	item33	2	Nos
35	1.34	Lamp Holder, 230V 5 A	item34	2	Nos
36	1.35	Twisted Pair Cable	item35	1	Meter
37	1.36	Non- Metallic Sheathed Cable	item36	1	Meter
38	1.37	Underground Feeder Cable	item37	1	Meter
39	1.38	Ribbon Cable	item38	1	Meter
40	1.39	Metallic Sheathed Cable	item39	1	Meter
41	1.4	Multi n- Conductor Cable	item40	1	Meter
42	1.41	Coaxial Cable	item41	1	Meter
43	1.42	Direct- Buried Cable	item42	1	Meter
44	1.43	Bus bar with brackets, 1 meter Each	item43	3	Nos
45	1.44	Rubber mat, 2' * 4' * 1"	item44	2	Nos
46	1.45	Electrician Helmet , YELLOW COLOUR	item45	2	Nos
47	1.46	RCC Pole with accessories (MS angle iron,'C' clamp, stay insulator etc.) and materials, 6 Meter	item46	1	Nos
48	1.47	Safety Belt, Standerd quality	item47	2	Nos
49	1.48	Ohm Meter;Series Type & Shunt Type , portable box type (Each), 50/2000-ohm analog	item48	2	Nos
50	1.49	Digital Multi Meter, DC 200mv -1000v,0 – 10A & AC 200mv- 750v , 0-10A, resistance 0-20 MO and 3 1/2 digit	item49	10	Nos
51	1.5	A.C Voltmeter M.I. analog portable box type housed in Bakelite case , Multi range 75V-150V-300V-600V	item50	3	Nos
52	1.51	Milli Voltmeter centre zero analog, protable box type housed in Bakelite case, 100-0-100 mV	item51	2	Nos
53	1.52	Ammeter MC analog, Portable box type housed in bakelite case (Each), 0-500mA,0-5 A, 0-25 A	item52	2	Each
54	1.53	Ammeter MI analog, Portable box type housed in bakelite case (Each), 0-1 A, 0-5 A, 0-25 a	item53	2	Each
55	1.54	Kilo Wattmeter Analog(Each), 0-1.5-3KW, pressure coil rating- 240v/440v, current rating-5A/10A Analoge, portable type Housed in bakelite case	item54	2	Nos
56	1.55	Digital Wattmeter, 230 V,1 KW, 50 Hz	item55	2	Nos
57	1.56	A.C. Energy Meter, Single Phase, 10 a, 240 V induction type	item56	1	Nos
58	1.57	A.C. Energy Meter, Three phase, 15 A, 440V inducation type	item57	2	Nos
59	1.58	Power Factor Meter Digital , 440V, 20 A, three phase portable box type	item58	2	Nos
60	1.59	Frequency Meter, 45 to 55 Hz	item59	1	Nos
61	1.6	Lux Meter , lux meter LCD read out 0.05 to 7000 lumens with Battery.	item60	1	Nos
62	1.61	Tachometer , Analog Type-10000 RPM	item61	1	Nos
63	1.62	Tong Tester / Clamp Meter, 0-100 A (Ditital Type )	item62	1	Nos
64	1.63	Megger , Analog -500 V	item63	2	Nos
65	1.64	Wheat Stone Bridge with Galvanometer and battery	item64	1	Nos
66	1.65	Phase Sequence Indicator, 3 phase, 415 V	item65	2	Nos
67	1.66	Resistance type starter ,For A.C Motors of 2 to 5 H.P	item66	1	Nos
68	1.67	Star Delta Starter – Semi automatic Starter , for A.C Motor for 2-5 HP	item67	1	Nos
69	1.68	Star Delta Starter – Fully automatic, For A.C Motors of 2 to 5 H.P	item68	1	Nos
70	1.69	Star Delta Starter - Soft starter, For A.C Motors of 2 to 5 H.P	item69	1	Nos
71	1.7	Temperature controlled soldring iron, 50 watt , 230 volt	item70	2	Nos
72	1.71	Discrete component trainer , Discrete Component (for diode and transistor circuit) with regulated power supply +5,0- 5 V,+12 ,0-12 V	item71	1	Nos
73	1.72	Battery charger , 0-6-9-12-24-48V,30amp	item72	1	Nos
74	1.73	soler panel with battery , 18 watt	item73	1	Nos
75	1.74	D.c compound generator with control pannel including fitted rheostat ,voltmeter , ammerter and breaker , DC compound generator with control panel including fitted rehostat , voltmeter , ammeter and breaker, 2.5 KW, 220 V and 3phase squirrel cage induction motor, 5HP_ 440 volt with control panel\&star detta starter	item74	1	Nos
76	1.75	Motor Generator(DC to AC) set consisting of - Shunt Motor with starting compensator and switch directly coupled to AC generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. Set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. Shunt Motor rating : 5 HP, 440V AC\nGenerator rating : 3-Phase, 4 wire,\n3.5 KVA, 400/230 Volts, 0.8 pf,\n50cycles	item75	1	Nos
77	1.76	Motor Generator(DC to AC) set consisting of - Shunt Motor with starting compensator and switch directly coupled to AC generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. Set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. Shunt Motor rating : 5 HP, 440V AC\nGenerator rating : 3-Phase, 4 wire,\n3.5 KVA, 400/230 Volts, 0.8 pf,\n50cycles	item76	1	Nos
78	1.77	Universal Motor with starter/switch, 240 V, 50 Hz, 1 HP	item77	1	Nos
79	1.78	Thyristor /IGBT controlled D.C. Motor drive with tacho-generator feedback arrangement , 1 HP	item78	1	Nos
80	1.79	Thyristor/IGBT controlled A.C. Motor drive with VVVF control 3 Phase, 2 HP	item79	1	Nos
81	1.8	Three phase transformer shell type oil cooled with delta /star , 3 KVA 415/240V 50 Hz	item80	2	Nos
82	1.81	Pillar electric drill machine motorized , 12-20mm capacity ,1hp, 440 v , 3 phase induction	item81	1	Nos
83	1.82	Motorised bench grinder , 1HP,3 phase , 440v with dol starter double side	item82	1	Nos
84	1.83	A.C. Series type Motor, 1 HP, 240 V, 50 Hz	item83	1	Nos
85	1.84	Single Phase Capacitor Motor with\nstarter switch, 1 HP, 240 V, 50 Hz	item84	1	Nos
86	1.85	Manual motor coil winding machine ,with step arbor	item85	1	Nos
87	1.86	Primary current injection set, 220v,50hz,1-$ ouput current 200A(min\) with time	item86	1	Nos
88	1.87	metal rack ,100cm*150cm*45cm	item87	4	Nos
89	1.88	Fire Buckets , standard size	item88	2	Nos