| 1 | 1 | CHARPOY GI PIPE | | | |
|---|
| 2 | 1.1 | (a) Removing unserviceable plywood from charpoy GI pipe, S & F new commercial ply wood of size 1980 x 900mmx 12mm thick BWR grade in one piece(an approved product of BIS having ISI certification mark IS-303) with 10 Nos of semi circular top bolt of 6mm dia 75mm long and nut with galvanised steel washers to be used for fixing of plywood top including drilling holes,tighting the complete charpoy i.e loose check nuts, elbows, long rail and short rails & following arrangements complete all as specified and shown on drawing.. \n(i) S & F 4 Nos 25mm square MS hollow tube 16 gauge wall thickness of length not less than 28 Cms each welded with fillet weld all around 3 mm thick to GI pipe charpoy at cornner to support plywood all as shown on drawing. \n(ii) S & F 2 Nos 25mm square MS hollow tube 16 gauge wall thickness of length not less than 83.6 Cms each welded with fillet weld all around 3mm thick to long rails of GI pipe charpoy at equal space to support plywood all as shown on drawing. Note :- (aa) All stee; sections except GI articles and adjoining surfaces of GI pipe which shall be degalvanised during welding of MS hollow pipe shall be painted with two coats of synthetic enamel paint over coat of red oxide primer. (ab) all the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. (ac) The bolts for fixing of plywood shall be counter sunk type and top of bolt (head) shall be flushed with ply top & finished with suitable filling. | | 150 | Each |
|---|
| 3 | 1.2 | (b) Taking out old broken existing long rail by unscrewing from GI charpoy without damaging the adjacent parts and S & F new long rail of GI pipe 32 mm bore (Nominal dia) Medium Gde duly threaded both ends up to the required length and fitted to the frame of GI charpoy complele all as specified and shown on drawing. | | 90 | Each |
|---|
| 4 | 1.3 | (c) Taking out old broken existing long rail by unscrewing from GI charpoy without damaging the adjacent parts and fixing short rail made out from long rail (retrieved from item No 1(b) here-in-before) duly cut and threaded both ends up to the required length and fitted to GI charpoy frame complete all as specified and shown on drawing. | | 110 | Each |
|---|
| 5 | 1.4 | (d) Removing old un-serviceable legs from charpoy GI pipe and fixing new legs made out of short rails retrived vide item Nos 1 .(c) here in before duly threaded on one end & provided with wooden plug on the other end complete all as specified and directed by Engineer-in-Charge. | | 330 | Each |
|---|
| 6 | 1.5 | (e) Removing old un-serviceable elbow and supply and fixing new elbow 32mm bore 6mm thick (ISI marked) complete all as specified and directed by Engineer-in -Charge. | | 220 | Each |
|---|
| 7 | 1.6 | (f) Removing old un-serviceable check nuts and supply and fixing new check nuts 32mm bore 6mm thick complete all as specified and directed by Engineer-in -Charge. | | 220 | Each |
|---|
| 8 | 1.7 | (g) Removing of old un-serviceable MS shoes 32mm bore to legs of charpoy GI internally threaded and painted with two coats of alluminium paint over a coat of primer red oxide all as shown on drg. | | 230 | Each |
|---|
| 9 | 2 | SOFA SET 5 SEATER | | | |
|---|
| 10 | 2.1 | (a) Taking out old broken/unserviceable arm of sofa set 5 seater and supply & fixing new arm of suitable size made out of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish to match with the existing colour complete. | | 65 | Each |
|---|
| 11 | 2.2 | (b) All as per item No. 2 (a) above but broken front leg complete. | | 72 | Each |
|---|
| 12 | 2.3 | (c) All as per item No. 2 (a) above but broken rear leg complete. | | 67 | Each |
|---|
| 13 | 2.4 | (d) All as per item No. 2 (a) above but broken long rail complete. | | 45 | Each |
|---|
| 14 | 2.5 | (e) All as per item No. 2 (a) above but broken back rail of back pieces complete. | | 45 | Each |
|---|
| 15 | 2.6 | (f) All as per item No. 2 (a) above but broken wooden battons complete. | | 320 | Each |
|---|
| 16 | 2.7 | (g) All as per item No. 2 (a) above but broken wooden bearers complete. | | 90 | Each |
|---|
| 17 | 3 | SOFA SET 4 SEATER | | | |
|---|
| 18 | 3.1 | (a) All as per item No. 3 (a) above but broken long rail complete. | | 40 | Each |
|---|
| 19 | 3.2 | (b) All as per item No. 3 (a) above but broken back rail of back pieces complete. | | 45 | Each |
|---|
| 20 | 3.3 | (c) All as per item No. 3 (a) above but broken wooden battons complete. | | 120 | Each |
|---|
| 21 | 3.4 | (d) All as per item No. 3 (a) above but broken wooden bearers complete. | | 80 | Each |
|---|
| 22 | 3.5 | (e) 100 MM thick foam 40 density for back & seat of Sofa set including cutting & stitching new lining cloth & finally covering the entire foam (Make- Feather foam/sleepwell) with tepestry cloth shade & colour as approved complete all as directed by Engineer - in-Charge. Note:- Rate should be quoted for each foam sheet size 21\" x 22\" duly completed. | | 577 | Each |
|---|
