77/2021 Mukhathala Block Panayil Thodu Varambu Road Tarring In Thrikkovilvattom Gp
Tender Value
7.14 Lakhs
Estimated cost
Bid Submission
24 Jun 2021
0 days left
EMD
10720
Bank guarantee accepted
Document Fee
1429
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
MUKHATHALA → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
77/2021 Mukhathala Block Panayil Thodu Varambu Road Tarring In Thrikkovilvattom Gp
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Jun-2021 | DATE EXTENSION | Date | 24-Jun-2021 |
BOQ
| Work Name:Mukhathala Block Panchayath 77/2021-22 Panayil Thodu Varamb Road Taring in Thrikovilvattom GP | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | ROAD tarring | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.001 | od1215988/2021_2022 : 51.2.3<br>Filling with Quarry Muck<br>Filling up low lying and water logged areas with local material/ quarry muck,<br>spreading in layers, leveling the top at site and consolidation by ramming, etc<br>complete for improving the CBR value of subgrade<br> | BI01010001010000000000000515BI0100001114 | 67.5 | cum |
| 3 | 1.002 | od1222116/2021_2022 : :MorD: Surface dressing of the ground in All kinds of soil including removing<br>vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to<br>1.5 m.<br> | BI01010001010000000000000515BI0100001115 | 135 | sqm |
| 4 | 1.003 | 4.9 : Wet Mix Macadam\t<br>\t\t\nProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.\t\t<br>\t\nBy Mechanical Means with 1 km lead | BI01010001010000000000000515BI0100001116 | 121.5 | cum |
| 5 | 1.004 | 75.5.1.1pb : Prime Coat - Low porosity - With Packed Bitumen Rates <br> Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 | BI01010001010000000000000515BI0100001117 | 810 | sqm |
| 6 | 1.005 | 75.5.2.3pb : Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. | BI01010001010000000000000515BI0100001118 | 810 | sqm |
| 7 | 1.006 | 75.9.3.pb.pa : Plastic roads- Packed Bitumen Rate <br> 20mm thick Open-Graded Premix Carpet\nusing Bituminous (penetration grade/modified bitumen) Binder -<br> Bitumen S-65 -\nPacked Bitumen and Shredded Plastic<br> <br> Providing, laying and rolling of opengraded\npremix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates\neither using penetration grade bitumen or emulsion to required line, grade and level to\nserve as wearing course on a previously prepared base, using HM Plant attached with\nopen pugmilll.Heating of aggregate at 150 degree Celsius to 170 degree Celsius, then\ntransferring the hot aggregate to pugmill and add shredded plastic @10.22 kg/100m2\nmixing well to form a uniform thin layer of plastic over - hot aggregate and adding hot\nbitumen (150 to 165 degree Celsius) @ 13.578 Kg/10m2 and mix well, laying and rolling\nwith a. three wheel 80-100 kN static roller capacity, finished to required level and grades\nto be- followed by seal coat of either Type A or Type B or Type C as per Technical\nSpecification Clause 508 <br> Case - I By Manual Means <br> <br> (II) Bitumen (S-65) | BI01010001010000000000000515BI0100001119 | 810 | sqm |
| 8 | 1.007 | 75.5.12.A.3.2pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510\t<br>\nA.\tBy Manual Means\t<br>\nCase III : Type C\t<br>\t\t\t\n(II)\tBitumen (S-65) | BI01010001010000000000000515BI0100001120 | 810 | sqm |
| 9 | 1.008 | od1218809/2021_2022 : Supplying and fixing nameboard of size 75*60 cm size using GI pipe as post and 1 mm thick MS sheet surrounded by MS angles including painting, lettering and fixing in concrete etc as per directions of Engineer-in-charge. | BI01010001010000000000000515BI0100001121 | 1 | no |
AI Tender Summary
Tender Timeline
Jun 23, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 24, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 24, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 25, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender