Dismantling And Handing Over The 36 Nos Of Stirrer Motor To Electrical Section. ( Stirrer And Motor Decoupled, Base Plate Separated, Rust Removed, Cleaned And All These Are To Be Handed To Electrical Section. ) Dismantling Of 2 Nos Six Stage Mixer-Kerala

Dismantling And Handing Over The 36 Nos Of Stirrer Motor To Electrical Section. ( Stirrer And Motor Decoupled, Base Plate Separated, Rust Removed, Cleaned And All These Are To Be Handed To Electrical Section. ) Dismantling Of 2 Nos Six Stage Mixer Settler From Top Floor Sep I And Refitting 12 Nos Stirrer Motor Back To The Mixer Settler After Moving Mixer Settlers To Rep 2 And Erecting In Rep Top Floor Fabrication Of Damaged Mixer Settler Supports, Legs Etc, Pump Foundations, Pipe Supports, Valve Supports, Other Miscellaneous Structural Works. Dismantling And Repositioning Of Walkway In Rep 2 After Installing 2 Nos Of Mixer Settlers. Frp Lining Of The Outside Of Mixer Settler And All Inside Joints With Two Layer Of 450 G / Sqm Chopped Strand Matting + Surface Mat And Frp Works On Ventilation Ducts In Bisphenol Resin. Lifting 1 No Mixer Settler And Lowering 2 Nos Of Mixer Settler In Rep 1 And Shifting Of 1 Nos Of Mixer Settler In Rep 2 Removing 3 Nos Of Settlers From The Present Location ( Ie. 1 No In Rep 2 And 2 Nos In Rep Dismantling And Repositioning Of Metering Pumps, Centrifugal Pumps Etc Hdpe Piping Works Including Fittings ( Like End, Bend, Tee, Reducer, Flanges Etc ) For Pipe Mm Od Hdpe Piping Works Including Fittings ( Like End, Bend, Tee, Reducer, Flanges Etc ) For Pipe 40 Mm Od Hdpe Piping Works Including Fittings ( Like End, Bend, Tee, Reducer, Flanges Etc ) For Pipe Mm Od Hdpe Piping Works Including Fittings ( Like End, Bend, Tee, Reducer, Flanges Etc ) For Pipe 63 Mm Od Hdpe Piping Works Including Fittings ( Like End, Bend, Tee, Reducer, Flanges Etc ) For Pipe Mm Od Hdpe Piping Works Including Fittings ( Like End, Bend, Tee, Reducer, Flanges Etc ) For Pipe 110 Mm Od Fixing Of Pp Valves Various Sizes Cleaning The Inside And Surroundings Of Mixer Settler In Stream 2 In Rep 1 And Mixer Settler In Sep 1 Aligning Of Stirrers In 102 Stages In Rep 1 As Required Changing Of Damaged Stirrer And Motor If Any In The 102 Stages In Rep 1 Changing Of Corroded Bolts And Nut Of Various Sizes Wherever Required For This Work Fixing Of Stirrer And Motor Of Saphonification Unit Approx Capacity One Cum In Rep 2 Installation Of Calibration Vessels Of Approx Capacity 10 Liters In Rep 1 Painting Of Ms Structural / Racks / Supports And Other Items Etc

Refer document

Refer document

Refer document