| 1 | 1 | Demolition of cement concrete (un -reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as directed. | | 26.5 | Cum |
|---|
| 2 | 2 | M&L for 40mm thick cement concrete as in flooring type B-1 1:2:4 (using 20mm crushed stone aggregate) finished even and smooth without using extra cement, complete all as specified and as directed. | | 40 | Sqm |
|---|
| 3 | 3 | Supply only 35mm wide 3mm thick glass dividing strips, complete all as specified and as directed. | | 12 | RM |
|---|
| 4 | 4 | M&L 50 mm thick PCC (1:3:6) type C1 usig 20mm gradde/crushed stone aggregate as in plinth protection finished complete including forming joints in 2 mtr intervals and filled with bitumen mastics, complete all as specified and as directed. | | 50 | Sqm |
|---|
| 5 | 5 | Taking down cement plaster of any description on brick wall or stone masonary or concrete or RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water, complete all as directed. | | 935 | Sqm |
|---|
| 6 | 6 | M&L for 15mm thick rendering in CM 1:6 finished even and smooth without using extra cement on stone wall surface, complete all as specified and as directed. | | 510 | Sqm |
|---|
| 7 | 7 | M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth, complete all as specified and as directed. | | 95 | Sqm |
|---|
| 8 | 8 | M&L for 10mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc, complete all as specified and as directed. | | 330 | Sqm |
|---|
| 9 | 9 | S&F wire netting galvanised steel wirecloth 0.91 nominal dia and 12 mm mesh lathing and fixed to ceiling including all gaps cutting andwaste fixed with nails on ceiling complete all as specified and directed by engr-in-charge. | | 30 | Sqm |
|---|
| 10 | 10 | Material and Labour non skid coloured ceramic tiles (1st quality) 300 x 300 x 6 mm in floors set and jonted in neat cement slurry and pointed in coloured / white cement to match in and including 15mm thick cement mortar screed in CM 1:6, complete all as specified and as directed. Make : Kajaria/Orientbell/Somany | | 145 | Sqm |
|---|
| 11 | 11 | Material and Labour glazed coloured ceramic tiles (1st quality) 300 x 200 x 7mm thick as in dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement, complete all as specified and as directed. Make : Kajaria/Orientbell/Somany | | 50 | Sqm |
|---|
| 12 | 12 | Material and Labour glazed coloured ceramic tiles (1st quality) 350 x450 x 7 mm /350x250x7mm thick as in dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white, complete all as specified and as directed. Make : Kajaria/Orientbell/Somany | | 260 | Sqm |
|---|
| 13 | 13 | M&L for joint free non skid colour ceramic tiles (1st quality) of size joint free area exc 0.11 sqm but nexc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including, complete all as specified and as directed. Make :Kajaria/Orientbell/Somany | | 55 | Sqm |
|---|
| 14 | 14 | M&L for colour ceramic tiles (1st quality) of size joint free area exc 0.11 sqm but nexc 0.18 sqm as in skirting / dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement including 10mm thick rendering in CM 1:4 as backing coat, complete all as specified and as directed. Make : Kajaria/Orientbell/Somany | | 6 | Sqm |
|---|
| 15 | 15 | M&L for non-skid coloured ceremic tiles (1st quality) joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. Make : Kajaria/Orientbell/Somany | | 95 | Sqm |
|---|
| 16 | 16 | All as per above Item no 15 but skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed. | | 6 | Sqm |
|---|
| 17 | 17 | M&L for Machine cut kota stone slab flooring 18-20 mm thick as in floor over 15mm thick screed bed in CM 1:6 base laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including demolition of stone or tiles laid bedded and pointed in any mortar, complete all as specified and as directed. | | 95 | Sqm |
|---|
| 18 | 18 | M&L for 18- 20 mm thick Kota stone slabs as in skirting , risers of steps & other vertical surfaces etc including 10mm thick rendering in CM 1:4 as backing coat, complete all as specified and as directed. | | 13 | Sqm |
|---|
| 19 | 19 | M&L for 15 to 20mm thick machine cut Udaipur green marble (approved by users of any type work table rubbed and polished) as in cooking platform steps, jambs etc including laid over 15mm thick cement screed bed in CM (1:4) Including cutting and rubbing grinding and granite polish (Mirror image finish) complete as directed by Engr-in-Charge. | | 22 | Sqm |
|---|
| 20 | 20 | S&F machine made precast cement concrete blocks (interlocking paves) colour rubberised 60mm thick with 6mm top layers of ante abrasive material laid over 25 mm thick sand cushion complete. The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 300 Kg/Cm2, complete all as specified and as directed. | | 360 | Sqm |
|---|
| 21 | 21 | S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C2 (20mm stone agg) all as directed by Engr-in-Charge.. | | 6 | Cum |
|---|
| 22 | 22 | M&L for chequered cement concrete tiles 20x20x2.5cm thick set and jointed in neat cement slurry in floor over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engg. In charge. | | 60 | Sqm |
|---|
| 23 | 23 | Dismantling structural steel work including doors, gates but excluding framed truss etc. , complete all as directed. | | 3 | Qtl |
|---|
| 24 | 24 | Supply and fabricated of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and anging; also fastening and fixing, complete all as specified and as directed. | | 300 | Kg |
|---|
| 25 | 25 | M&L for mild steel framed work as in brackets etc for cooler stands,supportings frame work for sun shade etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc, complete all as specified and as directed. | | 2000 | Kg |
|---|
| 26 | 26 | M&L preperartion of newly plastered surfaces of wall and applying three coat of white wash, complete all as specified and as directed. | | 450 | Sqm |
|---|
| 27 | 27 | M&L preperartion of newly plastered surfaces of ceilling and applying three coat of white wash, complete all as specified and as directed. | | 95 | Sqm |
|---|
| 28 | 28 | M&L preperartion of newly plastered surfaces of wall and applying two coat of putty with fair finished and even surface and applying two coat of oil bound distemper complete(including applying sand paper for finished the surface), complete all as specified and as directed. | | 100 | Sqm |
|---|
| 29 | 29 | M&L preperartion of old plastered surfaces of wall and applying one coat of white wash, complete all as specified and as directed. | | 400 | Sqm |
|---|
| 30 | 30 | M&L Preparing of old plaster surfaces and applying one coat of oil bound distemper on wall, complete all as specified and as directed. | | 200 | Sqm |
|---|
| 31 | 31 | Preparation of old surfaces of wall by Brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping surfaces and applying two coat of wall care putty to finished the surface and applying two coat of oil bound distemper complete all as specified and directed by engr-in-charge. | | 100 | Sqm |
|---|
| 32 | 32 | S&F in repair of PVC coated curtain rod 32mm dia with two knobs at the end to match the curtain rod, complete all as specified and as directed. Make: Vista or equivalent. | | 285 | RM |
|---|
| 33 | 33 | Taking down existing old tar felt from RCC roof ,stone roof etc .care fully including cleaning the roof surface by wire/coir brush and removing all girts ' stone fungus and finally washing down with water to the entire satisfaction of engineer in charge and remove debries and rubbish out side MD land, complete all as directed. | | 750 | Sqm |
|---|
| 34 | 34 | M&L for carrying out water proofing treatment for roofs in the following stages, complete all as specified and as directed:-\n(i) M&L for rendering 10mm thick in 1:4 mixed with integral water proofing compound all as per manufacturer instruction over conc surfaces finished even and smooth w/o using extra cement. \n(II) First coat of bitumen primer confirming to IS 3384 @0.40 Kg/Sqm over plastered surafces (III) Second coat of binding material using blown type bitumen confirming to IS -702 Grade 85/[email protected] kg per Sqm \n(IV) Third layer of APP modified polymeric membrane centre core of 20 micron HMHDPE , other film 20 micron each thickness 2 mm having weight 2.25 Kg/sqm \n(V) Final coat of binding material using blown type bitumen confirming to IS 702 of Grade 85/25@ 1.2 Kg/Sqm \n(vi) Material and labour for 40 mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate padding over roof laid in slope grooves 6 mm wide and 10 mm deep at 1.2 m interval in both ways or part thereof and filled with mastic bitumen (1:1) proportion\n | | 750 | Sqm |
|---|
| 35 | 35 | Demolition Concrete(un reinforced) of any description and in any position not otherwise specifically provided for, complete all as directed. | | 5 | Cum |
|---|
| 36 | 36 | M&L for 15mm thick rendering in cement mortar 1:3 using WPC @ 3% by weight of cement or as per manufacturers instruction, complete all as specified and as directed.. ( Note : WPC shall be measured and paid seperately) | | 55 | Sqm |
|---|
| 37 | 37 | Supply only water proofing compound, complete all as directed. | | 120 | Kg |
|---|
| 38 | 38 | M&L for 75mm thick plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregates to use in subbase of floors of sunken portion laid in slope 1:40 to the surface of RCC slab shall be made even and smooth without using extra cement when concrete is still green complete all as directed by the Eng-In-Charge. | | 55 | Sqm |
|---|
| 39 | 39 | M&L for applying one coat of cold emulsion bitumenous primer @ .25kg/sqm shall applied on plastered surface including side walls. There after a layer of APP membrane 1.5mm thk as specified above shall be laid by torch application method as per manufacturer instructions, complete all as specified and as directed. | | 55 | Sqm |
|---|
| 40 | 40 | M&L for PCC (1:5:10) lean cement concrete type E2 using 40mm graded stone aggregates in mass concrete after carrying out satisfactorly testing of CI pipes/PVC pipes joints and slab walls by filling water for 72 hrs ,sunken portion of nahani trap/floor trap and pipe joints shall be embeded in PCC 1:3:6 type C1, complete all as specified and as directed. | | 5 | cum |
|---|
| 41 | 41 | S&F 32 mm dia bore light grade galvenised steel water tubing provided 30cm beyond wall surface to drain out leakage if any. The mouth of GI pipe shall have Gravel to avoided chocking. The top of sunken portion of RCC slab to be finished such that its slope towards spout, complete all as specified and as directed. | | 18 | RM |
|---|
| 42 | 42 | Disconnectig existing tanks (exc 250 nexc 500 ltr) , setting aside ( or lovering if required ) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position . (cleaning repairing, etc. measured serately), complete all as specified and as directed. | | 250 | Each |
|---|
| 43 | 43 | Disconnectig existing tanks (exc 500 n exc 1000 ltr) , setting aside ( or lovering if required ) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position . (cleaning repairing, etc. measured serately), complete all as specified and as directed. | | 50 | Each |
|---|
| 44 | 44 | M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, with bleaching powder and cleaning chemical etc, complete all as specified and as directed. | | 450 | Each |
|---|
| 45 | 45 | M&L PCC (1:2:4)for water tank plinth all as specified 50 mm thick, complete all as specified and as directed. | | 40 | Sqm |
|---|
| 46 | 46 | Taking down or up steel / PVC tubing and connection including cleaning for refixing or removal to store, complete all as directed.\n(a) 25 mm dia | | 30 | RM |
|---|
| 47 | 47 | (b) 20 mm dia | | 120 | RM |
|---|
| 48 | 48 | (c ) 15 mm dia | | 200 | RM |
|---|
| 49 | 49 | S&F of water tubing, medium grade, galvanized, with all fittings fixed to wall, complete all as specified and as directed.\n(a) 25 mm dia, | | 30 | RM |
|---|
| 50 | 50 | (b) 20 mm dia | | 120 | RM |
|---|
| 51 | 51 | (c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc, complete all as specified and as directed. | | 200 | RM |
|---|
| 52 | 52 | S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPEpipe etc, complete all as specified and as directed Make : Parryware/Hindware/Cera. | | 18 | Each |
|---|
| 53 | 53 | S&F as in repairs vitreous china wash down water closet with seat & cover as in rerpairs complete incl fixing of flush pipe & flushing cistern etc, complete all as specified and as directed. Make : Parryware/Hindware/Cera. | | 8 | Each |
|---|
| 54 | 54 | M&L Vitrous china wash basin as in repairs, white flat back size 550x400 mm including , waste fittings, waste pipe, MS brackets complete all as specified fixed in repair, complete all as specified and as directed. Make : Parryware/Hindware/Cera. | | 15 | Each |
|---|
| 55 | 55 | S&F as in repair low level flusing cistern PVC 9-10 ltrs capacity with float valves white with inlet ball valve including float and includign pvc connection, complete all as specified and as directed. Make : Parryware/Hindware/Cera. | | 15 | Each |
|---|
| 56 | 56 | S&F of PVC SWR floor trap plain grating including jointing with solvent cement 75mm dia, complete all as specified and as directed. | | 20 | Each |
|---|
| 57 | 57 | S&F as in repairs fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm dia bore pipe, complete all as specified and as directed. Make : Jaquar/Marc/Cera.\n\n | | 50 | Each |
|---|
| 58 | 58 | S&F as in repairs fancy type , chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm bore dia pipe, complete all as specified and as directed. Make : Jaquar/Marc/Cera.\n | | 40 | Each |
|---|
| 59 | 59 | S&F as in repairs of stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20 mm dia, complete all as specified and as directed. Make : Jaquar/Marc/Cera. | | 10 | Each |
|---|
| 60 | 60 | S&F as in repairs of stop cock regular body with adujstable wall flange with fancy type chromium plated with (concealed type) 15mm dia, complete all as specified and as directed. Make : Jaquar/Marc/Cera. | | 20 | Each |
|---|
| 61 | 61 | S&F bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed minimum weight 15 mm 90gm/each, complete all as specified and as directed. (Make-PRYAG or equivalent). | | 30 | Each |
|---|
| 62 | 62 | S&F fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm dia bore, complete all as specified and as directed. Make : Jaquar/Marc/Cera. | | 15 | Each |
|---|
| 63 | 63 | S&F in repairs of chromium plated Swivel joint shower rose of 100 mm dia fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour, complete all as specified and as directed. Make : Jaquar/Marc/Cera. | | 15 | Each |
|---|
| 64 | 64 | S&F 600mmx450mm bevelled edge mirror of selected quality lass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. | | 30 | Each |
|---|
| 65 | 65 | S&F in repairs PVC Cabinet mirror of size ( 355mmx 455mm ) of selected quality glass and fixed to plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. Make prayag or polytuf | | 11 | Each |
|---|
| 66 | 66 | M&LStainless steel ,0.60 mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm as in repair, complete all as specified and as directed. Make Nirali/Jayna/Bluestar. | | 3 | Each |
|---|
| 67 | 67 | S&F in repairs for Kitchen plate Rack made out of stainless steel 0.50 mm thick size 750x600x200 mm with partition, complete all as specified and as directed. Make : Bluestar/Jayna. | | 2 | Each |
|---|
| 68 | 68 | Demolition of existing RCC tank on roof and removing from site of capacity exceeding 300 litr but n. exc. 500 litr and making good the distrub surface by providing 100mm thic platform of required size for water storage tank with PCC 1:2:4 type B1 using 20 mm graded stone aggregates over roof slab and finishing exposed cement concrete surface with 15mm thick plastering in cement mortar 1:4 and S&F white coloured rotational moulded polythene water storage tanks (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank Make Syntex 500 ltrs including tank lid cover complete with fixing arrangement, complete all as directed. | | 10 | Each |
|---|
| 69 | 69 | Taking down & S&Frotational moulded polythene water storage tanks triple layer (white colour) (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank 500 ltrs including tank lid cover complete with fixing arrangement, complete all as specified and as directed. Make : Sintex/Rotex/Polytuff. | | 16 | Each |
|---|
| 70 | 70 | Taking down and S&F white moulded polythylene water storage tank triple layer (white colour) of 1000 Ltr capacity (cylindrical vertical with closed tap) hoisted and fixed in position, complete all as specified and as directed. Make : Sintex/Rotex/Polytuff. | | 8 | Each |
|---|
| 71 | 71 | M&L Ball valves 20mm dia bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms, complete all as specified and as directed. | | 175 | Each |
|---|
| 72 | 72 | S&F only PVC Flexible waste pipe 32 mm to 40 mm dia with socket for steel sink/WHB upto floor level and length not less than 0.85 Mtr, complete all as specified and as directed. | | 20 | Each |
|---|
| 73 | 73 | S&F 15 mm bore bib taps, two way chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed. | | 20 | Each |
|---|
| 74 | 74 | S&F in repair health foucet with 1200 mm long flexible tube with wall hook and chromium plated two way angle valve complete all as specified and as directed and approved by Eng-in-Charge. Make : Jaquar/Cera. | | 20 | Each |
|---|
| 75 | 75 | S&F of CP mild steel grating 125 mm dia as in repairs, complete all as specified and as directed. | | 25 | Each |
|---|
| 76 | 76 | Taking down steel window/ventilator including guard bar, complete all as directed. | | 156 | Sqm |
|---|
| 77 | 77 | S&F of steel ventilator top hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed. | | 26 | Sqm |
|---|
| 78 | 78 | S&F of steel ventilator top hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and as directed. | | 26 | Sqm |
|---|
| 79 | 79 | S&F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, with or without cooler opening, dovetailed or welded, complete all as specified and as directed.. | | 52 | Sqm |
|---|
| 80 | 80 | All as per above item No. 79 but without glazing bars | | 52 | Sqm |
|---|
| 81 | 81 | Supply and fabrication of Mild steel guard bars and welded to window frames, complete all as specified and as directed. | | 690 | Kgs |
|---|
| 82 | 82 | Taking down of chowkats or frames w/o taking down shutters n exc 1.50 Sqm, complete all as directed. | | 45 | Each |
|---|
| 83 | 83 | Taking down chowkats or frames with shutter ( without taking off shutter frame frame) exc 1.5 Sqm but n exc 4 Sq .m each, complete all as directed. | | 35 | Each |
|---|
| 84 | 84 | M&L Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm each, complete all as directed. | | 35 | Each |
|---|
| 85 | 85 | S&F of 2nd class hard wood 35mm thick factory made skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, complete all as specified and as directed. | | 66 | Sqm |
|---|
| 86 | 86 | S&F 35 mm thick 2nd class hard wood factory made paneled door shutter ( two pannel) factory made with lock rail and panel of 9 mm thick BWP commercial ply or 12 veneered particle board with commercial veneering on both faces , the size of rail and style as per IS 1003 (part-I) klin seasoned and chamically treated, complete all as specified and as directed. | | 93 | Sqm |
|---|
| 87 | 87 | S&F Flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specifid and directed by engr-in-charge. | | 8 | Sqm |
|---|
| 88 | 88 | S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed..Make Rajshree | | 59 | Sqm |
|---|
| 89 | 89 | M&L for solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube, complete all as specified and as directed. | | 212 | RM |
|---|
| 90 | 90 | S&F in repairs of stainless steel butt hinges 100 mm size, complete all as specified and as directed. | | 105 | Each |
|---|
| 91 | 91 | S&F of aluminium anodized,tower bolt 150 mm long, complete all as specified and as directed. | | 205 | Each |
|---|
| 92 | 92 | S&F alum anodised handle extruded section of size 150mm long, complete all as specified and as directed. | | 70 | Each |
|---|
| 93 | 93 | S&F of Aluminium alloy, anodised, sliding door bolt 16 mm dia & 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed. | | 95 | Each |
|---|
| 94 | 94 | M&L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc , complete all as specified and as directed. | | 32 | Sqm |
|---|
| 95 | 95 | Hacking out old broken glass(any thickness,size quality or description)from metal frames including punching or drilling out old glazing pins &spring clips and provding &new ones, complete all as specified and as directed. | | 95 | Sqm |
|---|
| 96 | 96 | S&F in repairs 4 mm thick figured glass panes pin headed type, complete all as specified and as directed. | | 17 | Sqm |
|---|
| 97 | 97 | S&F galvanised mild steel wire cloth of 0.40 mm nominal dia of wire and 1.20 mm average width of aperture fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed. | | 80 | Sqm |
|---|
| 98 | 98 | S&F in repairs for galvanised mild steel wire cloth, 0.40 mm nominal dia of wire and 1.20 mm average width of aperature fixed with and including palin MS flat iron with galvanised wire stapples with and including necessary welding, nut bolt etc as in steel door window or door, complete all as specified and as directed. | | 50 | Sqm |
|---|
| 99 | 99 | M&L for two coat of enamel paint(First quality) over a coat of pink primer on new wooden surface including preparation of surface, over 10Cm width or girth, complete all as specified and as directed. | | 160 | Sqm |
|---|
| 100 | 100 | M&L for one coat of enamel paint(First quality) over old wooden surface including preparation of surface, over 10Cm width or girth, complete all as specified and as directed. | | 60 | Sqm |
|---|
| 101 | 101 | M&L for two coat of enamel paint( Ist quality) over a coat of red oxide primer on new steel surface including preparation of surface over 10Cm width or girth, complete all as specified and as directed. | | 130 | Sqm |
|---|
| 102 | 102 | M&L for Anodised aluminium frame for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed. and as directed by Eng-in-Charge | | 150 | Kg |
|---|
| 103 | 103 | M&L for Anodised aluminium sections for shutters of doors, windows,ventilators , aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door/windows , hinges, al. door stopper, al. sliding door bolt with haps and staple ,Aanodised snap beading screws etc, complete all as specified and as directed. (Rubber beading shall be measured and paid seperately) | | 70 | Kg |
|---|
| 104 | 104 | M&L Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and as directed. | | 20 | Sqm |
|---|
| 105 | 105 | Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and as directed. | | 20 | Sqm |
|---|
| 106 | 106 | Supply only rubber beading, complete all as specified and as directed. | | 130 | RM |
|---|
| 107 | 107 | M&L Sheet glass, selected quality 5.00 mm thk and glazing with oil putty in squares exc 0.5 sq. m in each pane, complete all as specified and as directed. | | 19 | Sqm |
|---|
| 108 | 108 | S&F Aluminium anodised decco grill, complete all as specified and as directed. | | 10 | Kg |
|---|
| 109 | 109 | M&L for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers and as directed by Eng-in-Charge. | | 5 | Sqm |
|---|
| 110 | 110 | S&F Door closer hydraulically regulated, Aluminium (extruded section) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg fixed, complete all as specified and as directed. | | 15 | Sqm |
|---|
| 111 | 111 | S&F aluminium alloy wire cloth 0.45mm nominal dia wire and avg. width of aperature 1.40mm and fixed to aluminium, complete all as specified and as directed. | | 10 | Sqm |
|---|
| 112 | 112 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore, complete all as directed. | | 100 | RM |
|---|
| 113 | 113 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as directed. | | 100 | RM |
|---|
| 114 | 114 | S&F 100mm dia CI spun cast iron pipe jointed with cement joint and fixed to walls including cutting of holes wherever required, complete all as specified and as directed. | | 40 | RM |
|---|
| 115 | 115 | S&F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in wall and fixed with MS clamp as per dierction of Eng-in-Charge | | 50 | RM |
|---|
| 116 | 116 | S&F PVC SWR pipes single socketed in any length with rubber rings joints laid in trenches or in floors 110mm, complete all as specified and as directed. | | 10 | RM |
|---|
| 117 | 117 | S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 75 mm, complete all as specified and as directed. | | 10 | RM |
|---|
| 118 | 118 | All as per above item No.117 but fixed in wall | | 50 | RM |
|---|
| 119 | 119 | S&F 75mm dia CI spun cast iron pipe jointed with cement joint and fixed to walls including cutting of holes wherever required, complete all as specified and as directed. | | 40 | RM |
|---|
| 120 | 120 | S&F PVC (SWR) branch pieces single socketed Y equal or unequal 110mm, complete all as specified and as directed. | | 15 | Each |
|---|
| 121 | 121 | S&F PVC (SWR) bends any radius 110mm, complete all as specified and as directed. | | 15 | Each |
|---|
| 122 | 122 | S&F PVC (SWR) bends 75mm dia with oval acess door, complete all as specified and as directed. | | 15 | Each |
|---|
| 123 | 123 | S&F PVC SWR vent cowl 110mm, complete all as specified and as directed. | | 10 | Each |
|---|
| 124 | 124 | S&F PVC SWR vent cowl 75mm, complete all as specified and as directed. | | 10 | Each |
|---|
| 125 | 125 | S&F 75 mm PVC SWR junction (T) with acces door equal or unequal, complete all as specified and as directed. | | 10 | Each |
|---|
| 126 | 126 | S&F 110mm PVC SWR junction (T) with acces door equal or unequal, complete all as specified and as directed. | | 10 | Each |
|---|
| 127 | 127 | S&F 100mm dia CI bends including cutting of holes, complete all as specified and as directed. | | 8 | Each |
|---|
| 128 | 128 | S&F 100mm dia CI connector of length 30 cms including cutting of holes with lead joints, complete all as specified and as directed. | | 8 | Each |
|---|
| 129 | 129 | S&F CI single branch piece 100mm dia, complete all as specified and as directed. | | 5 | Each |
|---|
| 130 | 130 | S&F CI double branch piece 100mm dia, complete all as specified and as directed. | | 5 | Each |
|---|
| 131 | 131 | S&F 75mm dia CI bends including cutting of holes, complete all as specified and as directed. | | 10 | Each |
|---|
| 132 | 132 | S&F CI single branch piece 75mm dia, complete all as specified and as directed. | | 10 | Each |
|---|
| 133 | 133 | S&F CI double branch piece 75 mm dia, complete all as specified and as directed. | | 10 | Each |
|---|
| 134 | 134 | Dismantling of AC/ fiber glass ( corrugated , semicorrugated , etc ) sheet in roof covering, complete all as directed. | | 240 | Sqm |
|---|
| 135 | 135 | S&F 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L type or J type or cranked hook bolts washer in roof etc., complete all as specified and as directed. | | 60 | Sqm |
|---|
| 136 | 136 | M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Including dismantaling of existing sheet, complete all as specified and as directed. | | 150 | Sqm |
|---|
| 137 | 137 | Demolition of Brick work , pcc block ,stone masonry built in cement mortar, complete all as directed. | | 38 | Cum |
|---|
| 138 | 138 | M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed. | | 28 | Cum |
|---|
| 139 | 139 | All as per above item No.138 but except stone | | 10 | Cum |
|---|
| 140 | 140 | Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and as directed. | | 210 | Sqm |
|---|
| 141 | 141 | Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar, complete all as specified and as directed. | | 55 | X-Sqm |
|---|
| 142 | 142 | M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3, complete all as specified and as directed. | | 55 | X-Sqm |
|---|
| 143 | 143 | M&L for PCC solid block 10 cm thick type B1 1:2:4 set in cement mortar 1:6, complete all as specified and as directed. | | 55 | Sqm |
|---|
| 144 | 144 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft and loose soil , and removal of surplus soil to a distance n. exc 50m and makint the surface good, complete all as specified and as directed. | | 8 | Each |
|---|
| 145 | 145 | M&L cement concrete type D2(1:4:8) using 40 mm graded stone agg foundation filling of sub base and as fixing of RCC/angle post incl form work if necessary, complete all as specified and as directed. | | 2 | Cum |
|---|
| 146 | 146 | S&F of stainless steel butt hinges 100 mm size, complete all as specified and as directed. | | 315 | Each |
|---|
| 147 | 147 | S&F 100mm size single action door spring hinge complete, complete all as specified and as directed. | | 25 | Each |
|---|
| 148 | 148 | S&F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 40mm longs, complete all as specified and as directed. | | 75 | Each |
|---|
| 149 | 149 | M&L 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, wall , etc. fixed with L-type or J-type or cranked hook bolts, complete all as specified and as directed. | | 30 | Sqm |
|---|
| 150 | 150 | M&L asbastos cement one piece plain anguler ridge 6 mm thickfixing with L-type or J-type or cranked hook bolts, complete all as specified and as directed. | | 10 | RM |
|---|
| 151 | 151 | Dismantling wrought iron or mild steel work of any description, complete all as directed. | | 4.5 | Per \nQuintal |
|---|
| 152 | 152 | M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and as directed. | | 450 | Kg |
|---|
| 153 | 153 | Dismantling of wall and ceiling board ( fiber , pulp , insulation , etc ) or insulation ,etc.) or insulation board/ slabs/ blankes , any thickness including over fillig, complete all as directed. | | 150 | Sqm |
|---|
| 154 | 154 | S&F snap grid frame work of pre powder coated pre fabricated GI section (Inculding hangers) for false ceiling of size 600x600 mmm with ceiling board pvc laminated gypsum board 8 mm thick and fixed as per manufacture instructions inculding as per sample kept in GE, complete all as specified and as directed. | | 80 | Sqm |
|---|
| 155 | 155 | M&L PVC Wall Lining interlocking 5mm thick plain colour fitted into the wall with strips including fillets on joints as per manufacturer’s instruction complete all as per specified and directed by Engr-in -charge. | | 70 | Sqm |
|---|
| 156 | 156 | Dismantling of expended metal ,any thickness or mesh, wt exc 4 kg per Sqm fix with steel or wood fillets if any, complete all as directed. | | 28 | Sqm |
|---|
| 157 | 157 | M&L steel rolling shutter thickness of lath 1.25 mm without wall wearing as specified including top cover anchoring rod haps and staple and one soap coat of primer erected in position as included ,cmplete pus pull or manual type, complete all as specified and as directed. | | 28 | Sqm |
|---|
| 158 | 158 | M&L for greasing of existing rolling shutter and making in serviceble condition including smaller part such as bearing etc. all as directed by Eng-in-charge. | | 20 | Each |
|---|
| 159 | 159 | M&L for 15mm thick screed bed or bedding layer in CM 1:6 floor finished even & rough to receiver tiling/floor finish, complete all as specified and as directed. | | 145 | Sqm |
|---|
| 160 | 160 | M&L light shade Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. Make : Somany/Kajaria/Orientbell. | | 30 | Sqm |
|---|
| 161 | 161 | All as per above item No. 160 but skirting includig 10 mm thick rendering in CM 1:4, complete all as specified and as directed. | | 4 | Sqm |
|---|
| 162 | 162 | M&L 18-20 mm thick granite of any work step, rise, platform etc. in cement mortor 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including 15 mm thick in CM 1:6 screed bed, complete all as specified and as directed. | | 8 | Sqm |
|---|
| 163 | 163 | Grinding and polishing to edges and rounding off granite slab etc.for smooth finish, complete all as specified and as directed. | | 30 | RM |
|---|
| 164 | 164 | M&L for welding in repair exc 2.5 cm but n exc 5 cm in length thickness of metal to be welded n exc 6mm, complete all as specified and as directed. | | 40 | Each |
|---|
| 165 | 165 | M&L 75 mm thick PCC 1:4:8 Type D2 using 40 mm graded stone aggregate as in sub base etc, complete all as specified and as directed. | | 40 | Sqm |
|---|
| 166 | 166 | Demolition of Precaste article and PCC block, complete all as specified and as directed. | | 1.5 | Cum |
|---|
| 167 | 167 | S&F Pre cast cement cocrete post of size 60cm long 100mmx100mm, 1:2:4 Ty B-1 fixed in CM 1:4 with grooves for fixing of RCC jali, complete all as specified and as directed. | | 75 | Each |
|---|
| 168 | 168 | Providing pre cast cement concrete louvres and jali, 35mm thick ( measured solid) incld all moulding, excluding frame, PCC 1:2:4 type B-0 (12.5mm graded agg ) set in CM 1:4, complete all as specified and as directed. | | 60 | sqm |
|---|
| 169 | 169 | M&L PCC 1:2:4 Type B0 using (12.5mm graded aggregate ) as in coping, complete all as specified and as directed. | | 0.3 | Cum |
|---|
| 170 | 170 | M&L repair to window including taking down replacement of unserviceable hinges device box type handle making them serviceable condition on refixing on same opening making the soffit and jomb good condition as per directon of Eng-in-Charge . | | 30 | Each\n Job |
|---|
| 171 | 171 | M&L for 2nd class hard wood ,plain ,solid ,straight chowkats and frames , wrought , framed rebated on the solid, rounded or chamfered , put togather with glue pinned at joint supplied and fixed, complete all as specified and as directed. | | 0.2 | Cum |
|---|
| 172 | 172 | S&F as in repair providing pre laminted particle board exterior grade prelaminated both sides and decorative choice fixed for kitchen cupboard and shelving complete 18 /19 mm thick, complete all as specified and as directed. | | 20 | Sqm |
|---|
| 173 | 173 | S&F continuous hinges mild steel bright finish or electroglavnised width of flap 30mm, complete all as specified and as directed. | | 20 | RM |
|---|
| 174 | 174 | S&F hasp and staple of aliminium aodised 75mm in long, complete all as specified and as directed. | | 15 | Each |
|---|
| 175 | 175 | S&F 40mm dia cupboards knobs fixed with nuts screw and washer of aluminium anoised, complete all as specified and as directed. | | 15 | Each |
|---|
| 176 | 176 | Demolition of stone slab as in selve laid dry and pointedin any mortar, complete all as directed. | | 10 | Sqm |
|---|
| 177 | 177 | M&L for 18-20 mm thick mirror polished Kota stone as in shelves incl fixing in walls & making good , complete all as specified and as directed. | | 10 | Sqm |
|---|
| 178 | 178 | M&L 3mm thick sheet glass ordinery quality and glazing with oil putty in square n exc 0.5 Sq m in each pane, complete all as specified and as directed. | | 85 | Sqm |
|---|
| 179 | 179 | Dismantling of posts or struts ( wood ,steel or RCC) any section ,including taking out embedded in concrete portion and making good disturbed ground, complete all as directed. | | 60 | RM |
|---|
| 180 | 180 | 'S&F chain link MS galvanised fencing any size or type (4.2 kg/sqm) all as per specified and directed by Eng-in-Charge | | 900 | Kg |
|---|
| 181 | 181 | S&F MS angle iron as in fencing post/gate including fabrication for hole for fixing the nut and arrengement for fixing barbed wire, complete all as specified and as directed. | | 510 | Kg |
|---|
| 182 | 182 | S&F MS flat iron securing bolts posts and struts in fencing incl holes(for securing wire mesh etc) incl drilling bolting or revating, complete all as specified and as directed. | | 190 | Kg |
|---|
| 183 | 183 | M&L mild steel round bar 10 mm dia and over cut to length ,bend to shape required, complete all as specified and as directed. | | 230 | Kg |
|---|
| 184 | 184 | Note for all above items:-All items in BOQ are for\"Materials and labour /Supply and fix\" and to be executed in \"Repairs \" unless otherwise specifically mentioned as \"Supply only\" or \"fixing only\" in BOQ. Contractors are required to quote their rates accordingly. | | | |
|---|
