| 1 | 1 | DISTRIBUTION PIPE LINE | | | |
|---|
| 2 | 2 | Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) | | | |
|---|
| 3 | 3 | 80 mm dia (PHED BSR Item No. | | 1465 | RMT |
|---|
| 4 | 4 | 100 mm dia (PHED BSR Item No. | | 305 | RMT |
|---|
| 5 | 5 | 150 mm dia (PHED BSR Item No. | | 50 | RMT |
|---|
| 6 | 6 | Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in- charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Manually Operated CI Sluice valve of Class PN-1.0 | | | |
|---|
| 7 | 7 | 80 mm HW (PHED BSR Item No. 6.1.1.1/ 2020) | | 4 | Each |
|---|
| 8 | 8 | 100 mm HW (PHED BSR Item No. 6.1.1.2/ 2020) | | 4 | Each |
|---|
| 9 | 9 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. | | | |
|---|
| 10 | 10 | In all type of soil. For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm (PHED BSR Item No. | | 1092 | RMT |
|---|
| 11 | 11 | In Hard Rock ( Blasting prohibited) For dia of pipe up to 150 mm nominal. (PHED BSR Item No. | | 728 | RMT |
|---|
| 12 | 12 | Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (PHED BSR Item No. | | 238.73 | Cum |
|---|
| 13 | 13 | Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work. (PHED BSR Item No. | | 143.24 | CUM |
|---|
| 14 | 14 | Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). (PHED BSR Item No. | | 95.49 | CUM |
|---|
| 15 | 15 | Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6 | | | |
|---|
| 16 | 16 | 100 mm dia (PHED BSR Item No. | | 20 | Each |
|---|
| 17 | 17 | 80 mm dia (PHED BSR Item No. | | 20 | Each |
|---|
| 18 | 18 | FUNCTIONAL HOUSEHOLD CONNECTION | | | |
|---|
| 19 | 19 | Providing service connection as per technical specifications & standard drawing as per relevant IS Code (amended upto date) from all kind of water mains up to consumer meter/premises (Complete job). This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil including demolishing of Cement Concrete,WBM, Black top etc. of all thickness; cutting of CC road/jhiriby using a concrete cutter machine; depositing and refilling of pit & jhiri with watering & ramming/compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 meter; providing& fixing of all fitting duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS clamp with saddle piece gunmetal ferrule 4.0 mm (ISI make), gunmetal NRV (ISI Make), valve (IS:778) and specials with MDPE pipe PE-80 PN 12.56 as per ISO 4427, with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges. in addition to the ferrule, an orifice of 4.0 mm dia shoul also be provided in the service line at the entry point of the consumer's property in such a way that it should be accessible for inspection to VWSC, PHED and any other authority which would like to inspect an when required. The service line should be laid at least 45 cm below ground level, except in cases of concrete/ bituminous roads where minimum depth shall be 20 cm. | | | |
|---|
| 20 | 20 | For detailed specifications of MDPE pipes, please refer section “Technical Specifications” of bid document. General specifications of MDPE pipes shall be as under:\n• The raw material shall be virgin PE 80 Blue compound and comply with the requirements of ISO/Directive of Testing Material: 9080 with minimum required strength of 8kg/sq.cm.\n• The raw material shall be of Food grade quality\n• Pressure rating shall be 12.5 Bar\n• The pipes shall bear ISO marking\nAverage length upto 5.00 mtr 20 mm dia MDPE pipe. / 15mm GI Class B Pipe | | 215 | Each |
|---|
| 21 | 21 | Data entry of existing FHTCs in rural area under JJM on website ejalshakti.gov.in; work includes visiting the village for collecting basic data consumers like i.e. Aadhar No./ Ration Card/ Voter ID/ BPL Card/Pan Card/ Driving Licence/ Passport/ Antyodaya Card/ Mobile No. etc. and entering the details on the above website. The cost also includes computer and operator. | | 215 | FHTC |
|---|
