Special Repairs To 06 Single Officer Accomodation (P-71A) At Ins Parundu 8161/E8
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Jul 2021
0 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramnad → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repairs To 06 Single Officer Accomodation ( P-71A ) At Ins Parundu 8161 / E8
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Jun-2021 | Revised BOQ | BOQ | 28-Jun-2021 |
| 2 | 26-Jun-2021 | Amendment to BOQ | Financial Bid | 28-Jun-2021 |
| 3 | 28-Jun-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Jul-2021 |
BOQ
| Name of Work: SPECIAL REPAIRS TO 06 SINGLE OFFICER ACCOMODATION (P-71A) AT INS PARUNDU 8161/E8 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | SCHEDULE 'A' PART-I [ B/R WORKS] | |||
| 2 | 2 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not hacking) removing serviceable tile to stores and rubbish off premises all as specifed. | 524 | Sqm | |
| 3 | 3 | Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced complete all as specified and directed. | 13.55 | Cum | |
| 4 | 4 | Material and Labour Non skid ceramic tile 7-8mm thick area exceeding 0.18 Sqm and not exceeding 0.38 Sqm size (Square or rectangular)colour tiles in floor etc, laid over and including Screed bed or bedding layer 15mm thick in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match with as in floors complete all as specified and directed. | 90 | Sqm | |
| 5 | 5 | Material and Labour Non skid ceramic tile 7-8mm thick joint free area exceeding 0.18 Sqm and not exceeding 0.38 Sqm size (Square or rectangular)colour tiles in vertical surface/skirting etc, laid over and including backing coat of 10mm thick in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match with as in floors complete all as specified and directed. | 16 | Sqm | |
| 6 | 6 | Material and Labour for Vitrified ceramic coloured tiles double charged/dark shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 15mm thick in CM 1:4 complete all as specified and as directed. | 280 | Sqm | |
| 7 | 7 | Material and Labour for vitrified ceramic tiles 10mm thick double charged /dark shade (Square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in vertical surface, over and including provision of cement bedding 10 mm thick in CM 1 : 4 set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed | 26 | Sqm | |
| 8 | 8 | Material and Labour Non skid ceramic tile 7-8mm thick area exceeding 0.06 Sqm and not exceeding 0.11 Sqm size (Square or rectangular)colour tiles in floor etc, laid over and including Screed bed or bedding layer 15mm thick in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match with as in floors complete all as specified and directed. | 22 | Sqm | |
| 9 | 9 | Material and Labour for Glazed ceramic coloured tiles in vertical surface 450x350x 7mm/ 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including backing coat of 10 mm thick in CM 1:4 all as specified and directed. | 90 | Sqm | |
| 10 | 10 | M & L for 25 mm thick cement concrete type B1 1:2:4 (using 20 mm graded aggregate) as in flooring as a leveling coarse cement concrete surface complete all as specified and as directed. | 392 | Sqm | |
| 11 | 11 | Taking up or down steel tubing 15 mm bore including connections, cleaning for refixing or removal to store complete all as specified and directed. | 100 | RM | |
| 12 | 12 | Taking up or down steel tubing 20 mm bore including connections, cleaning for refixing or removal to store complete all as specified and directed. | 100 | RM | |
| 13 | 13 | Supply & Fix in repair of Unplasticised PVC pipes 15 mm dia of pressure rating 10kgf/cm2 with all fittings fixed to walls/ ceilings or in floors ect any type of pipe complete all as specified and directed. | 20 | RM | |
| 14 | 14 | Supply & Fix in repair of Unplasticised PVC pipes 15 mm dia of pressure rating 10kgf/cm2 with all fittings fixed to walls/ ceilings or in floors ect any type of pipe complete all as specified and directed. | 180 | RM | |
| 15 | 15 | Suply and fixing in repairs Two piece wall hung extended EWCs with seat cover and cistern with twin flush system fitting complete all as specified and directed. \nMake: Cera Model- Campbell Cat No.S1031103, P Trap Cat No. S1060103, Cistern: Cat No. B1530117 Campbell duroplast seat cover Cat No. B1810106 Twin flush cistern or equivalent in Jaquar/Hindware | 6 | Each | |
| 16 | 16 | Suply and fixing in repairs Counter top wash basin 550 x 400 x 160 mm snow white colour including waste fitting brass chromium plated 32mm with long and fly nut screwed shank, waste chain and plug and porceline stopper excluding tap but including waste pipe complete all as specified and directed. \nMake: Cera Model- Campa Cat No.S2020102 or equivalent in Jaquar/Hindware\n | 6 | Each | |
| 17 | 17 | Suply and fixing Corner glass shelf with 2 racks complete all as specified and directed. \nMake: Cera Cat No. F5005201 or equivalent in Jaquar/Hindware | 6 | Each | |
| 18 | 18 | Supply and fix in repairs 15 mm bore Stop valves/angle valve, fancy type CP cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. | 30 | Each | |
| 19 | 19 | Supply and fixing PVC connection 15mm dia and 600mm long with PTMT nuts complete all as specified and as directed. | 12 | Each | |
| 20 | 20 | Supply and fixing in repairs 2-way Bip cock with single handle and wall flange complete all as specified and as directed. \nMake: Cera Cat No.F106163 or equivalent in Jaquar/Hindware | 6 | Each | |
| 21 | 21 | Supply and fix in repairs Brass chromium plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed. | 6 | Each | |
| 22 | 22 | Supply and fixing in wall mixer (3 in 1) with arrangement for both telephonic shower and over head shower with bend pipe complete all as specified and directed.\nMake: Cera Cat No.F1003403 or equivalent in Jaquar/Hindware | 6 | Each | |
| 23 | 23 | Supply and fixing Hand shower 125 mm dia (5”) with 3 flow, wall hook and 1.50 metre flexible hose omplete all as specified and directed.\nMake: Cera Cat No.F7030308AB or equivalent in Jaquar/Hindware\n | 6 | Each | |
| 24 | 24 | Supply and fixing in repair grating square 150mm size of PTMT(minimum 100 gms) complete all as specified. | 12 | Each | |
| 25 | 25 | Suply and fixing in repairs Central hone basin mixer with 450 mm braided connection pipe (without pop-up) complete all as specified and directed. \nMake: Cera Cat No.F1003461 or equivalent in Jaquar/Hindware | 6 | Each | |
| 26 | 26 | Supply and Fix Mirror 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plughs with chromium plated brass screws and cup washers in repairs complete all as specified and directed. | 6 | Each | |
| 27 | 27 | Supply and Fix in repair 75 mm PVC (SWR) floor trap plain with grating including jonting with solvent cement complete, all as specified and as directed. | 12 | Each | |
| 28 | 28 | Supply and fix in repair PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement in all complete complete all as specified and as directed. | 6 | Each | |
| 29 | 29 | Supply and fix in repair Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) double layered hoisted & fixed in position all as specified of 1000 ltrs capacity complete all as specified and directed. | 6 | Each | |
| 30 | 30 | Supply and fix 20 mm dia bore Ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed (Minimim weight 20 mm - 210 gms) complete all as specified and as directed. | 6 | Each | |
| 31 | 31 | Supply and fixing in repairs 20 mm dia gun metal, globe or gate valves, with iron head, screwed both ends for iron pipe all as specified and as directed. | 6 | Each | |
| 32 | 32 | Supply and fixing Towel rail 600 mm long of PTMT fixed with including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) complete all as specified and as directed. | 6 | Each | |
| 33 | 33 | Taking down old door or window or cup board Chowkhats or frames n.exc 1.50 sqm each with shutters but without taking off shutters from the frames complete all as specified and directed. | 18 | Each | |
| 34 | 34 | Taking down door or window or cupboard Chowkhats of frames of size exc 1.5 sq.m but n exc 4sqm each with shutters (Without taking of shutters from the frame) complete all as specified and directed. | 46 | Each | |
| 35 | 35 | Supply and fix powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. | 400 | Kg | |
| 36 | 36 | Supply & fix powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, anodised aluminum snap beading, roller screws etc. complete all as specifieds | 12 | Sqm | |
| 37 | 37 | Supply & fix 4mm thick figured glass, pin head type and fixing with necessary rubber gasket and beedings etc in squares n exc 0.50 sqm in each panel complete all as specified and as directed. | 3 | Sqm | |
| 38 | 38 | Supply & fix 4mm thick figured glass, pin head type fixing with necessary rubber gasket and beedings etc in squares exc 0.50 sqm in each panel complete all as specified and as directed. | 26 | Sqm | |
| 39 | 39 | Supply & fix 4mm thick frosted sheet glass ordinary quality fixing with necessary rubber gasket and beedings etc in squares n exc 0.50 sqm in each panel complete all as specified and as directed. | 3 | Sqm | |
| 40 | 40 | Supply & fix of aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. | 40 | Sqm | |
| 41 | 41 | Material and labour for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) sesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating all as specified and as directed. | 0.5 | Cum | |
| 42 | 42 | Supply & fix 25 X 3 mm flat as in hold fast in doors or gates or other section with guesset plates,rails,braces,etc., complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittlings (exclusive sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. | 5 | Kg | |
| 43 | 43 | Material and labour for treated with tar or coal tar black paint for treating small articles such as stop, covers, gully gratings, hold fasts, ends of posts, backs of chowkats etc., area n exc 0.1 sq.m each complete all as specified and as directed. | 1.08 | Per 100 Nos | |
| 44 | 44 | Material and labour for treated with tar or coal tar black paint treating ends of posts, backs of chowkats, etc., area exc 0.1 sq.m but n ec 0.5 sq.m each all as specified and as directed. | 0.18 | Per100 Nos | |
| 45 | 45 | SMaterial and labour for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glued pinned at joints, fixed to wall and making good to wall all as specified and directed. | 0.902 | Cum | |
| 46 | 46 | Supply and fix 30mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass,gauge etc (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beds for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(b) and fitted to chowkats complete all as specified and directed. | 30 | Sqm | |
| 47 | 47 | Supply and fix factory made 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, both faces covered with decorative face veener with lipping / frame to match complete all as specified and directed. | 30 | Sqm | |
| 48 | 48 | Material and labour for two coat of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width and girth including preparation of new wooden surface complete all as specified and as directed. | 94.5 | Sqm | |
| 49 | 49 | Supply and fix Factory made solid PVC moulded Door shutter, 30 mm thick (style), consisting of frame made out of MS tubes for top & bottom rails,MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement , supplying and fixing in the frame at site as per specication and drawings given in SSR Part-II complete all as specified and as directed. | 9 | Sqm | |
| 50 | 50 | Supply and Fix solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squar tube and fixing in opening as per specification complete all as specified and directed. | 30 | RM | |
| 51 | 51 | S&F 100 mm stainless steel butt hinges medium weight including screws all as specified and as directed. | 125 | Each | |
| 52 | 52 | S&F aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed. | 84 | Each | |
| 53 | 53 | S&F aluminium handle 125 mm cast type anodised complete all as specified and directed. | 84 | Each | |
| 54 | 54 | S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. | 42 | Each | |
| 55 | 55 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings,heads,shoes,bends, swan-necks, etc., including cleaning or refixing or removal to store (measured over all fixed along the centre line over fittings and accessories) | 60 | RM | |
| 56 | 56 | S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls including all scafloding arrangments complete all as specified and directed. | 60 | RM | |
| 57 | 57 | S&F 110 mm dia PVC (SWR) bends any radius at any hieght including scafolding complete all as specified and directed. | 15 | Each | |
| 58 | 58 | Supply & Fix in repairs fancy type health faucet ABS body with hook and 1 meter SS braided rubber hose pipe complete all as specified and directed.\nMake: Cera cat pt No F8030102 or equivalent in Jaquar/Hindware | 6 | Each | |
| 59 | 59 | Material and labour for 75mm thick cement concrete 1:3:6 type C2 (Using 20mm graded stone aggregate) in plinth protection and pavings finished even and smooth without using extra cement complete all as specified and as directed. | 50 | Sqm | |
| 60 | 60 | Material and labour for poat construction anti-termite treatment for providing & injecting along the external wall below concrete or masonry apon using chemical emulsion @ 2.25 liter per linear meter including drilling and plugging holes etc in apron/plinth protection complete all as specified and as directed. | 75 | RM | |
| 61 | 61 | Material and labour for poat construction anti-termite treatment of peripery of internal wall (where the flooring is tile and similar) using chemical emulsion @ one liter per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2(1 part cement and 2 part coarse sand) mixed with pigment to match the existing floors complete all as specified and as directed. | 175 | Sqm | |
| 62 | 62 | Taking down cement plaster of any description on bricks or stone walls , RCC ceiling etc, including racking out joints, hacking for keys, scrubbing down with water etc, all as specified and as directed. | 100 | Sqm | |
| 63 | 63 | M & L for 15 mm thick cement plaster in CM (1:4) on brick wall and finish the surface fair and even without using extra cement complete all as specified and directed. | 100 | Sqm | |
| 64 | 64 | Material and labour for Complete removal of existing treatment and preparing the surfaces of wall and apply 3mm thick Birla wall care putty and applying two coat of oil bound distemper over a coat of alkaline resistant primer complete all as specified and directed | 1050 | Sqm | |
| 65 | 65 | Material and labour for Complete removal of existing treatment and preparing the surfaces of ceiling and applying two coat of oil bound distemper over a coat of alkaline resistant primer complete all as specified and directed | 300 | Sqm | |
| 66 | 66 | Material and labour for Preparation of preparing new plastered surface on wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed . | 100 | Sqm | |
| 67 | 67 | Material and labour for Complete removal of existing treatment including preparation of wall surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed . | 220 | Sqm | |
| 68 | 68 | S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and directed | 6 | Each | |
| 69 | 69 | Supply & fix anodised aluminium snap grid frame work for false ceiling with 605mm x 605mm size, consisting of main Tee of size 23.50mmx36.50mm x1.50mm, cross Tee of size 23.50mmx23.50mmx1.50mm and wall angle of size 36.00mmx25.00mmx1.50mm of approved make including all necessary cuttings, fixing of aluminium section firmly in position with and including steel hangers 6 mm dia G.I. wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 40 mm long in soffit of slab/walls complete all as specifed and as directed including provision of 8mm thick calcium silicate board, 600mmx600mm size, fixed in ceiling, flat or sloping all as specified and as directed . | 125 | Sqm | |
| 70 | 70 | Material and labour for Stainless Steel railing for staircase/parapet fixed to concrete/wall surfaces of SS 304 grade complete including removal of old railings complete all as specified and as directed. | 300 | Kg | |
| 71 | 71 | Material and labour 12 mm thick vennered decorative plywood , grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws complete all as specifed and as directed. | 20 | Sqm | |
| 72 | 72 | Material and labour 18 mm thick vennered decorative plywood , grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws complete all as specifed and as directed. | 20 | SqM | |
| 73 | 73 | S&F 75 mm brass handle cast type polished bright all as specified and as directed | 12 | Each | |
| 74 | 74 | S&F 100 mm brass handle cast type polished bright all as specified and as directed | 12 | Each | |
| 75 | 75 | S&F Continuous (piano) hinges 30 mm flaps, brass, bright finish or electrogalvanised all as specified and as directed. | 35 | RM | |
| 76 | 76 | M&L second class hard wood in scantling in clean swan wood for Cubboard buit in furniture work all as specified and directed. | 0.3 | Cum | |
| 77 | 77 | M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new work with two coats all as specifeid and as directed. | 10 | Sqm | |
| 78 | 78 | SCHEDULE 'A' PART-II [ E/M WORKS] | |||
| 79 | 79 | MMaterial and labour for Point wiring complete with FRLS PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit 20mm dia (ISI marked) and accessories, wall / surface (open conduit) on ceiling with sunken type pressed steel / welded terminal boxes made out of 2mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of FRLS PVC insulated unsheathed 1.5 Sqmm FRLS multistranded with copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following:- | |||
| 80 | 80 | (a) One light point , controlled by one switch complete | 84 | Per Point | |
| 81 | 81 | (b) one fan point, controlled by one switch complete | 24 | Per Point | |
| 82 | 82 | (c)One 3 pin 5 Amps switch socket combination on independent board | 18 | Per Point | |
| 83 | 83 | (d)One 3 pin 5 Amps switch socket combination on the same board with other switches, | 12 | Per Point | |
| 84 | 84 | (e) One bell point controlled by bell push switch on independent board | 6 | Per Point | |
| 85 | 85 | All as per Item No. 79, but 4 Sqmm size copper conductor cable FRLS and 4 Sqmm copper earth wire cable FRLS drawn through 20 mm dia PVC conduit including provision of conduit and conduit accessories for One 3/6 pin, 15 Amps Multi purpose switch socket combination on independent board complete all specified and as directed. | 18 | Per Point | |
| 86 | 86 | M & L for ceiling rose, surface bakelite, 65x50mm, two to three terminals, including taking down unserviceable ceiling rose complete all as specified and as directed by the Engineer-in-Charge | 114 | Each | |
| 87 | 87 | S & F in repair Modular Switch, 1 Way, 6A, 1 Module including taking down of unserviceable item complete all as specified and as directed. | 138 | Each | |
| 88 | 88 | S & F in repair Modular Switch, 1 Way, 16A, 1 Module including taking down of unserviceable item complete all as specified and as directed. | 18 | Each | |
| 89 | 89 | S & F in repair Modular Socket, 6A, 2/3 pin combined, 2 Module including taking down of unserviceable item complete all as specified and as directed. | 30 | Each | |
| 90 | 90 | S & F in repair Modular Socket, 6A / 16A, 2/3 pin combined, 2 Module including taking down of unserviceable item complete all as specified and as directed. | 18 | Each | |
| 91 | 91 | S & F in repair Fan step regulator, 120 W, 2 Module including taking down of unserviceable item complete all as specified and as directed. | 18 | Each | |
| 92 | 92 | S & F in repair Modular Bell Push, 6 A, 1 Module including taking down unserviceable item complete all as specified and as directed. | 6 | Each | |
| 93 | 93 | S & F in repair Bell, AC, 230 volts, single pole including taking down of unserviceable item complete all as specified and as directed. | 6 | Each | |
| 94 | 94 | S & F in repair Modular White cover plate with frame, 1 Module including taking down of unserviceable item complete all as specified and as directed. | 6 | Each | |
| 95 | 95 | S & F in repair Modular White cover plate with frame, 2 Module including taking down of unserviceable item complete all as specified and as directed. | 12 | Each | |
| 96 | 96 | S & F in repair Modular White cover plate with frame, 3 Module including taking down of unserviceable item complete all as specified and as directed. | 36 | Each | |
| 97 | 97 | S & F in repair Modular White cover plate with frame, 4 Module including taking down of unserviceable item complete all as specified and as directed. | 6 | Each | |
| 98 | 98 | S & F in repair Modular White cover plate with frame, 6 Module including taking down of unserviceable item complete all as specified and as directed. | 12 | Each | |
| 99 | 99 | S & F in Modular White cover plate with frame, 8 Module including taking down of unserviceable item complete all as specified and as directed. | 12 | Each | |
| 100 | 100 | S & F in repair Modular Metal flush box, 1/2 module including taking down of unserviceable item complete all as specified and as directed. | 18 | Each | |
| 101 | 101 | S & F in repair Modular Metal flush box, 3 module including taking down of unserviceable item complete all as specified and as directed. | 36 | Each | |
| 102 | 102 | S & F in repair Modular Metal flush box, 4 module including taking down of unserviceable item complete all as specified and as directed. | 6 | Each | |
| 103 | 103 | S & F in repair Modular Metal flush box, 6 module including taking down of unserviceable item complete all as specified and as directed. | 12 | Each | |
| 104 | 104 | S& F in repair Modular Metal flush box, 8 Module including taking down of unserviceable item complete all as specified and as directed. | 12 | Each | |
| 105 | 105 | Material and labour for Sub main wiring with PVC insulated unsheathed 1100 volts FRLS grade single core multi stranded copper conductor cable 2 runs of 4 sqmm drawn through in and including 32mm dia PVC conduit heavy duty ISI marked(IS 9537 Part III) fixed in walls and all accessories along with 1 run of 4 sqmm PVC insulated unsheathed copper conductor single core multi stranded cable 1100V FRLS grade as earth continuity conductor and connected to common earth dolly complete all as specified and as directed. \nNote: 2 runs of 4 sqmm cable along with 1 run of 4 sqmm cable for earth conductor and one run of PVC conduit shall be measured as one length. | 144 | RM | |
| 106 | 106 | M & L for single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complet with one single pole MCB 240 V, 20 amp including taking down old unserviceable item complete all as specified and as directed by the Engineer-in-Charge. | 18 | Each | |
| 107 | 107 | Material and labour for Sub main wiring with PVC insulated unsheathed 1100 volts FRLS grade single core multi stranded copper conductor cable 2 runs of 2.5 sqmm drawn through in and including suitable size PVC conduit heavy duty ISI marked(IS 9537 Part III) fixed in walls and all accessories along with 1 run of 2.5 sqmm PVC insulated unsheathed copper conductor single core multi stranded cable 1100V FRLS grade as earth continuity conductor and connected to common earth dolly complete all as specified and as directed. \nNote: 2 runs of 2.5 sqmm cable along with 1 run of 2.5 sqmm cable for earth conductor and one run of PVC conduit shall be measured as one length. | 75 | RM | |
| 108 | 108 | Material and labour for Sub main wiring with PVC insulated unsheathed 1100 volts FRLS grade single core multi stranded copper conductor cable 4 runs of 6 sqmm drawn through in and including suitable size PVC conduit heavy duty ISI marked(IS 9537 Part III) fixed in walls and all accessories along with 2 run of 6 sqmm PVC insulated unsheathed copper conductor single core multi stranded cable 1100V FRLS grade as earth continuity conductor and connected to common earth dolly complete all as specified and as directed. \nNote: 4 runs of 6 sqmm cable along with 2 run of 6 sqmm cable for earth conductor and one run of PVC conduit shall be measured as one length. | 130 | RM | |
| 109 | 109 | Supply and fix 4 Pole MCCB 160 A, 36 kA with Thermal - Magnetic Release including taking down old unserviceable complete all as specified and as directed. MCCB. Make : L&T / Legrand. | 1 | Each | |
| 110 | 110 | Supply and fix 3 phase LED display Energy meter ,Trivector meter, 10 - 60A in a sheet metal enclosure including removing old unserviceable Energymeter and depositing in MES store complete all as specified and as directed. | 6 | Each | |
| 111 | 111 | Supply and fix sheet metal enclosure powder coated double door for Distribution Board, TPN 4 way DB with Detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed. | 6 | Each | |
| 112 | 112 | Supply and fix sheet metal enclosure powder coated double door for Distribution Board, SPN 6 way DB with Degree of Protection IP 42 , Detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling from position unserviceable DBs complete for taking into credit all as specified and as directed. | 2 | Each | |
| 113 | 113 | Supply and fix sheet metal enclosure powder coated double door for Distribution Board, VTPN 8 way DB suitable for MCCB Incomer IP 43 , IK 09 ,provided with insulated vertical phase bus-bars ,neutral bar/s with shroud/s ,earth bar/s , sticking saddles ,cement spill protector ,color-coded interconnecting wire set ,cable ties , blanking plates and circuit identification labels. including , Disconnecting electric connections, dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed. | 1 | Each | |
| 114 | 114 | Supply and fix MCB SP 5 A to 32 A , B curve, 10 kA including , disconnecting electric connections, dismantling unserviceable MCB for taking into credit complete all as specified and as directed. | 59 | Each | |
| 115 | 115 | Supply and fix MCB SP 40A , B curve, 10 kA including , disconnecting electric connections, dismantling unserviceable MCB for taking into credit complete all as specified and as directed. \n | 2 | Each | |
| 116 | 116 | Supply and fix MCB SPN 40 A , B curve, 10 kA including , disconnecting electric connections, dismantling unserviceable MCB for taking into credit complete all as specified and as directed. | 1 | Each | |
| 117 | 117 | Supply and fix MCB TP 40 A , B curve, 10 kA including , disconnecting electric connections, dismantling unserviceable MCB for taking into credit complete all as specified and as directed. Make : L&T / Legrand. | 13 | Each | |
| 118 | 118 | Supply and Fix LED 16W 1'X1' WHITE POWDER COATED CRCA FULL GLOW RECESS MOUNTING LED BACKLIT PANEL ,environmental friendly new generation, asthetically designed, ultra modern recess mounting with high briteness, suitable for armstrong/grid ceilling fitting complete all as specified and as directed. \nMake: Crompton /Philips/ Havells/Bajaj/C&S | 48 | Each | |
| 119 | 119 | Supply and fix in repairs LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver including Stellar bright 20 watt TLED box type complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including taking down existing fitting complete all as specified and as directed. \nMake : PHILIPS /C&S/Crompton/Havells/Bajaj. | 12 | Each | |
| 120 | 120 | Supply and fix in repairs LED mirror light fiiting surface mounted type 2 feet x 10W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed. \nMake : C&S /Philips / Crompton/Havells/Bajaj. | 6 | Each | |
| 121 | 121 | Supply and fix in repair LED energy saving surface mounted decorative bulk head edge light comprising of high brightness 10W, 6000K LEDs complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed. \nMake : Crompton /Philips / Havells/ Bajaj/C&S | 6 | Each | |
| 122 | 122 | Supply and fix Exhaust fan 300mm sweep, heavy duty , Rust proof body and blades, double ball bearing with noisless operation, 1400 RPM complete with louvers including making suitable opening at suitable height,and provision of nuts and bolts on the wall for fixing the exhaust fan fan complete all as specefied and as directed .\nMake :Almonard/Crompton Greeves /Bajaj/Usha.\nNote: The rate quoted shall be deemed to be inclusive of cuttings of holes in PCC or through bricks walls of appropriate dia suitable making nitche for 300 mm sweep exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B0 as required including making good as per existing surface colour matching of wall including 4 Nos of nut & bolts to fix the Exhaust fan complete all as specified and as dirceted.\n | 6 | Each | |
| 123 | 123 | Supply and fix batten holder , 6A , angle type including taking down old unserviceable holder complete all as specified and as dirceted.\n | 12 | Each | |
| 124 | 124 | Supply and fix , 0.5 W LED bulb including taking down old unserviceable bulb complete all as specified and as dirceted.\n | 12 | Each | |
| 125 | 125 | Supply and fix Geyser 25 ltrs Vertical wall mounted Capacity with minimum 2 kW heating element, 5 star rating,maximum operating pressure 8 bar, titanium steel tank with titanium enamel coating or Blue Diamond glass lined tank and titanium enamelled heating element or glass coated heating element, LED Temp indicator, temperature regulation knob , including connecting Heavy Stainless Steel (SS) braided hoses (Flexible Hoses) of required length having a minimum pressure rating of 8 bar and compatible for hot water applications including making end connections for water inlet/ outlet from/to water heater or to the discharge line and minimum warranty for product 2 years complete all as specified and as directed.\nMake : RACOLD /Crompton/Havells/ Usha | 6 | Each | |
| 126 | 126 | Earthing complete with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized earth strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in Electrical Plate No.3 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessry test on completion including taking down of old all as specified and as directed. \nNote :1. The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 20 mm dia watering pipe, wire mesh, 40mm dia medium grade GI protection pipe for earth strip etc., complete.\n2. Earthing strip upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately. \n | 2 | Each | |
| 127 | 127 | Supply and fix LT under ground cable 1100 volts grade PVC /XLPE sheathed armoured multistranded heavy duty electric cable with aluminium conductor 3.5 core 70 Sqmm, laid in trenches/ duct / walls including cable gland on both termination where necessary including laying, connecting to various switches in panel board, testing and commissioning etc complete all as specified and directed.\nNOTE: Earth work excavation, sand cushion & brick for cable protection shall be measured and paid separately. | 45 | RM | |
| 128 | 128 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth for laying pipes and getting out in hard/dense soil, complete all as specified | 25.65 | Cum | |
| 129 | 129 | Returning, filling in incl spreading leveling, watering and well ramming in layers n.exc.25cm thick complete all as specified and as directed. | 17.95 | Cum | |
| 130 | 130 | Removing excavated material to a distance n.exc 50m away and depositing where as directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed. | 5.61 | Cum | |
| 131 | 131 | Supply and spread fine river sand in trenches for cable cushioning on top and bottom of cable for cable protection complete all as specified and directed. \n(Note: Only punned thickness of river sand shall be measured) | 4.05 | Cum | |
| 132 | 132 | Supply only bricks, common burnt clay building bricks, subclass `B’ designation 75, old size , complete all as specified and directed. | 0.36 | Per 1000 Nos | |
| 133 | 133 | Earthing complete with Copper earth plate electrode of size 600mmX600mm, 3.15 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to copper earth strip 20x3mm by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in Electrical Plate No.3 earth strip protected by GI pipe 40mm bore light grade for protection extend of 7.5M as earthing lead and watering pipe 20mm bore GI pipe medium grade connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessry test on completion including taking down old complete Earthing system all as specified and as directed. \nNote : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 20 mm dia watering pipe, wire mesh,40mm dia light grade GI protection pipe for earth strip etc., complete.The rate quoted shall be deemed to include for Earth continuity conductor and GI protection pipe upto 7.5m. | 2 | Each | |
| 134 | 134 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection complete all as specified and as directed.\nMake:Crompton Philips/Bajaj/ Havells | 6 | Each | |
| 135 | 135 | Supply and fix in repair 32 mm dia light grade GI tube bracket of length 1.2 metre bend to required shape including MS clamp made out of 30 mm x 6 mm MS flat iron and fix on steel tubular poles with necessary GI bolts, nuts and washers - 2 sets for each fittings complete set all as specified and directed.\n | 6 | Each | |
| 136 | 136 | Supply and laying GI tubing Light grade of size 40 mm dia bore laid in trenches / on floors / walls/ceiling for protection of UG cable complete all as specified and as directed. | 15 | RM | |
| 137 | 137 | Supply , installation, testing and commissioning of outdoor LT feeder pillar box panel board , CPRI Approved , made out of CRCA sheet 3.15 mm thick vermin proof factory made with 40 x 40 x6 mm MS angle/channel duly painted with two coats of synthetic enamel powder coated paint over a coat of metal primer with bus bar chamber comrising of high conductivity copper bus bar of capacity 500 Amps three phase and half the capacity for neutral including voltmeter, Ammeter selector switches, PCC foundation suitable to accommodate the following as specied and as directed.:-\nINCOMING\n(a) MCCB 415 V,250 A, 4 pole with electronic release with over load , short circuit and earth fault protection with earth module breaking capacity 36 KA- 01 Nos. (b)On Load Change over switch 4 pole - 250 Amps - 01 No \n(c)Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp complete and all as per standard pratice ---1 Job\nOUTGOING\n(a) MCCB 125 A, 415V , 4 pole with Electronic Earth leakage module ,over load short circuit protection, breaking capacity 25 KA electronic release- 01 Nos \n(b) MCCB 100 A, 415V , 4 pole with Electronic Earth leakage module ,over load short circuit protection, breaking capacity 25 KA electronic release - 02 Nos\n(c) MCCB 63 A, 415V , 4 pole with Electronic Earth leakage module ,over load short circuit protection, breaking capacity 25 KA electronic release - 03 Nos\nNote :-(i) All MCCBs / instruments / MCBs /Bus Bar shall be housed in a separate housing with on- off latches in the housing and Digital Panel Meter Multifunctional type for Amps, Volts, KWH, Power Factor and other parameters flush mounting with LED indication lamp for each outgoing all as per standard pratice.\n\n | 1 | Each Job | |
| 138 | 138 | Cutting the existing bituminous road / cement concrete surface to the required width and depth for laying pipe lines and returning filling in, removal of surplus material complete all as specified.\nNote: PCC for making good the top level to match raod surface shall be measured and paid separately. | 0.5 | Cum | |
| 139 | 139 | Material and labour for 150mm thick Plain Cement Concrete 1:3:6 type C2 using 40 mm graded stone aggregate for making good the disturbed road surface after laying of pipe line over returned filled and compacted earth surface to match with existing road level complete all as specified and as directed. | 0.5 | Cum | |
| 140 | 140 | Supply and laying, in repair of galvanised steel water tubes, medium grade 32mm bore with and including all necessary GI fittings such as bends, elbows, short piece connections, backnuts, caps plugs, unions etc., laid in trenches/wall/ceiling including testing and taking down old complete all as specified and as directed. | 58 | RM | |
| 141 | 141 | MSupply and laying, in repair of galvanised steel water tubes, medium grade 25mm bore with and including all necessary GI fittings such as bends, elbows, short piece connections, backnuts, caps plugs, unions etc., laid in trenches/wall/ceiling including testing and taking down old complete all as specified and as directed. | 20 | RM | |
| 142 | 142 | S & F gun metal globe or gate valves with iron wheel head screwed head scrwed both ends for iron pipe and fixed, 32 mm bore, including removing old unserviceable item complete all as specified and as directed by the Engineer-in-Charge | 3 | Each | |
| 143 | 143 | S & F of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, for iron pipe of size 25mm bore including removing old unserviceable item complete all as specified and directed. | 1 | Each | |
| 144 | 144 | Material and Labour for construction of masonry valve chamber internal size 60cm x 60cm x 90 cm including 100 mm thick PCC (1:4:8) type D2 foundation using 40mm graded stone aggregate, brick work in CM (1:6) plastering internal sufaces completely and external surfaces upto 150 mm belowground level, 15 mm thick in CM (1:4) 100 mm thick (1:3:6) Type C1 coping 40x40x6 mm angle iron with 3 mm thick MS sheet cover complete with handle locking arrangement including painting steel and iron surfaces with two coats of synthetic enamel paint over a coat of zinc primerincluding necessary excavtion earth work in any type of soil complete all as specified and as directed. | 1 | Each Job | |
| 145 | Total in Figures |
AI Tender Summary
Tender Timeline
Jun 28, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 28, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 28, 2021
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 05, 2021
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 05, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 07, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender