Replacement Of Old Asbestos Sheet With Profile Sheet Of Project Office At Bhubaneswari Ocp Under Bhubaneswari Area Replacement Of Old Asbestos Sheet With Profile Sheet Of Project Office At Bhubaneswari Ocp Under Bhubaneswari Area .

Tender Notice

28137378
Replacement Of Old Asbestos Sheet With Profile Sheet Of Project Office At Bhubaneswari Ocp Under Bhubaneswari Area Replacement Of Old Asbestos Sheet With Profile Sheet Of Project Office At Bhubaneswari Ocp Under Bhubaneswari Area .
Indian
Orissa
10-06-2021
24-06-2021
28-06-2021

Tender Details

Replacement Of Old Asbestos Sheet With Profile Sheet Of Project Office At Bhubaneswari Ocp Under Bhubaneswari Area Replacement Of Old Asbestos Sheet With Profile Sheet Of Project Office At Bhubaneswari Ocp Under Bhubaneswari Area .

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
INR 9.32 Lakhs /-

BOQ Items

Name of Work:
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Item Description/ Heading BI01010001010000000000000515BI0100001112
2 1.01 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar BI01010001010000000000000515BI0100001113 4.8 cum
3 2 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:Asbestos sheet BI01010001010000000000000515BI0100001114 769.32 sqm
4 3 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. BI01010001010000000000000515BI0100001118 769.32 sqm
5 4 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm) BI01010001010000000000000515BI0100001119 50.1 metre
6 5 Extra for providing and fixing wind ties of 40x 6 mm flat iron section. BI01010001010000000000000515BI0100001119 410.7 metre
7 6 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. BI01010001010000000000000515BI0100001119 581.16 kg
8 7 Brick work with Fly Ash Brick (230x125x75 mm size) bricks of class designation 10 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) BI01010001010000000000000515BI0100001119 4.8 cum
9 8 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) BI01010001010000000000000515BI0100001119 32.4 sqm
10 9 Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium\nprimer on both sides & edges, including two coats of\nsynthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T- sections 35 x15x1.5 mm size main runners, cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). BI01010001010000000000000515BI0100001119 237.12 sqm
11 10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate\n20 mm nominal size) BI01010001010000000000000515BI0100001119 3 cum
12 11 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work BI01010001010000000000000515BI0100001119 78.16 sqm
13 12 Total impact of GST for the purpose of CTC BI01010001010000000000000515BI0100001143 1 Nos
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail