Rate Contract For Consruction And Commissioning Of 200Mm Dia Tube Well In All Type Of Strata In Rural And Urban Area Under Div Sujangarh District Churuwith Two Year Deffect Liability Rate Contract For Consruction And Commissioning Of 200Mm Dia Tube Well I
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jun 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sujangarh → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Rate Contract For Construction And Commissioning Of 200Mm Dia Tube Well In All Type Of Strata In Rural And Urban Area Under Div Sujangarh District Churuwith Two Year Deffect Liability
BOQ
| Name of Work: RATE CONTRACT FOR”CONSRUCTION &COMMISSIONING OF 200MM DIA TUBE WELL IN ALL TYPE OF STRATA IN RURAL AND URBAN AREA OF PANCHAYAT SAMITI- SUJANGARH DISTRICT CHURU WITH TWO YEAR DEFFECT LIABILITY | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Construction of tube well upto 100 mtr. depth in all type of rocks by DTH system & overburden to accommodate casing pipe of ' following sizes in all type of soils and overburden including lowering of casing pipe,(if required) excluding cost of casing pipe as per IS : 2800 Part I :1991 and IS : 2800 Part II 1979 (both amended up to date) and technical specification. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal bore of casing pipe. Nominal bore 200 mm dia | BI01010001010000000000000515BI0100001112 | 1 | Mtr |
| 2 | 2 | …………do…………. for drilling beyond 150 mtr depth from ground level | BI01010001010000000000000515BI0100001113 | 1 | Mtr |
| 3 | 3 | Construction of Tube Well from ground level and upto 100 mtr. depth and above to accommodate housing and assembly pipe in all type of alluvium strata, unconsolidated fonnation such as pebbles, boulders etc. by percussion/ rotary drilling method as per IS:2800 (part 1 & 2) 1979 asamended up to date. The work will include cost of lowering of housing, strainer assembly pipes, with supply and wrapping of coir rope, wherever necessary and development of tube well as per IS specification using suitable Air Compressor but will not include cost of casing & strainer pipe. Work will be completed after obtaining sand free water. Nominal bore 200 mm dia. | BI01010001010000000000000515BI0100001114 | 1 | Mtr |
| 4 | 4 | …………do…………. for drilling beyond 100 mtr depth from ground level | BI01010001010000000000000515BI0100001115 | 1 | Mtr |
| 5 | 5 | Development of tube well as per IS: 11189- 1985 and IS: 2800 (Part- 1)-1991 (both amended up to date) using suitable compressor to give sand free water for required yield of the gravel packed tube well. | BI01010001010000000000000515BI0100001116 | 1 | Hr. |
| 6 | 6 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/2001) or amended up to date of following sizes. 200mm dia nominal bore 5.4mm thick | BI01010001010000000000000515BI0100001117 | ||
| 7 | 7 | 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m) | BI01010001010000000000000515BI0100001118 | 1 | Mtr |
| 8 | 8 | Labour charges for making slots on blank pipes made of ER W MS black pipe ISi marked of following sizes, the slotting should be as per IS:8 I 10-1985. 200 mm dia nominal bore of S.4mm thickness | BI01010001010000000000000515BI0100001119 | 1 | Mtr |
| 9 | 9 | Supply & Installation of 3 phase ISI marked submersible motor pump set of five star rating by BEE and as per JS: 8034-2011 (pump) and IS 9283-2013 (motor) or amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump,installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. | BI01010001010000000000000515BI0100001120 | ||
| 10 | 10 | Up to 5.5 KW (7.5 HP) & head up to 120 mtr. | BI01010001010000000000000515BI0100001121 | 1 | KW |
| 11 | 11 | Up to 5.5 KW (7.5 HP) & head above 120 mtr | BI01010001010000000000000515BI0100001122 | 1 | KW |
| 12 | 12 | 7.5 KW (JO HP) & head up to 120 mtr. | BI01010001010000000000000515BI0100001123 | 1 | KW |
| 13 | 13 | 7.5 KW (10 HP) & head above 120 mtr. | BI01010001010000000000000515BI0100001124 | 1 | KW |
| 14 | 14 | 9.3 KW ( 12.5 HP) & head up to 120 mtr. | BI01010001010000000000000515BI0100001125 | 1 | KW |
| 15 | 15 | 9.3 KW (12.5 HP) & head above 120 mtr. | BI01010001010000000000000515BI0100001126 | 1 | KW |
| 16 | 16 | 11 KW (15 HP) & head up to 120 mtr. | BI01010001010000000000000515BI0100001127 | 1 | KW |
| 17 | 17 | 11 KW (IS HP) & head above 120 mtr. | BI01010001010000000000000515BI0100001128 | 1 | KW |
| 18 | 18 | 13 KW (17.5 HP) & head up to 120 rntr. | BI01010001010000000000000515BI0100001115 | 1 | KW |
| 19 | 19 | 13 KW (17.5 HP) & head above 120 mtr. | BI01010001010000000000000515BI0100001116 | 1 | KW |
| 20 | 20 | 15 KW (20 HP) and above, head up to 120 mtr. | BI01010001010000000000000515BI0100001117 | 1 | KW |
| 21 | 21 | 15 KW (20 HP) and above, head above 120 mtr. | BI01010001010000000000000515BI0100001118 | 1 | KW |
| 22 | 22 | Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventor, suitable starting capacitors,phase indicators, lighting arrangement etc complete suitable for threephase pump set. The panel should have space for energy meter (supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 guage M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of\nsize 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs,each leg's length 18\" and double door including in built locking system.The legs should be embedded in M-15 cement concrete plat form.The size\nof CC plateform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be Suitable for on 440 Volt AC Supply. | BI01010001010000000000000515BI0100001119 | ||
| 23 | 23 | Above 5 HP and up to 10 HP | BI01010001010000000000000515BI0100001120 | 1 | Each |
| 24 | 24 | Above 10 HP and up to 15 HP | BI01010001010000000000000515BI0100001121 | 1 | Each |
| 25 | 25 | Above 15 HP | BI01010001010000000000000515BI0100001122 | 1 | Each |
| 26 | 26 | Supply & fixing of PVC insulated PVC sheathed ( heavy duty) Armoured electric cable with aluminium conductor for working voltage 1100 volt to IS:7098 Part-I/IS:1554 Part-I applicable 3.5 core (Approved make if any) 32sqmm | BI01010001010000000000000515BI0100001123 | ||
| 27 | 27 | 25 Sqmm | BI01010001010000000000000515BI0100001124 | 1 | Mtr. |
| 28 | 28 | Supply & Fixing of ISi marked three core PVC flat submersible cable as per IS 694: 1990 or amended up to date and conductor as per class 5 of IS 8130: 1980 includ ing making connection etc. 3 core 10.0 mm2 | BI01010001010000000000000515BI0100001125 | ||
| 29 | 29 | 3 core 4.0 mm2 | BI01010001010000000000000515BI0100001126 | 1 | Mtr. |
| 30 | 30 | 3 core 6.0 mm2 | BI01010001010000000000000515BI0100001127 | 1 | Mtr. |
| 31 | 31 | 3 core I 0.0 mm2 | BI01010001010000000000000515BI0100001128 | 1 | Mtr. |
| 32 | 32 | Supply & Fixing tube well cover of MS sheet 8mm thick at top & Smm thick I OOmm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both end in 80mm sizes passing through a hole in the centre of MS sheet. A 25mm socket with end plug shall also be welded over top plate (as per drawillg enclosed). A GI nipple having outside thread of size 1/2\" (for installation pressure gauge) shall tie provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. | BI01010001010000000000000515BI0100001115 | ||
| 33 | 33 | 200mm dia | BI01010001010000000000000515BI0100001116 | 1 | Each |
| 34 | 34 | Providing & Lowering in tubewell ISl marked GI Pipe \"B\" class as per IS: 1239 or amended up to date threaded and double flanged (welded) on both ends and two number 25x3mm flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. | BI01010001010000000000000515BI0100001117 | ||
| 35 | 35 | 50 mm dia In 6 mtr. Length | BI01010001010000000000000515BI0100001118 | 1 | Mtr |
| 36 | 36 | 65mm dia.In 6 mtr. Length | BI01010001010000000000000515BI0100001119 | 1 | Mtr |
| 37 | 37 | Providing, installing, testing and commissioning of double flanged bulk flow meter with removable mechanism, of class B conforming to ISO 406411 or amended upto date of approved make including cost of all material and labour as per specifications with GI Box (sheet 16 SWG)suitable with locking arrangement of following dia.65 mm dia | BI01010001010000000000000515BI0100001120 | 1 | Each |
| 38 | 38 | Providing & Fixing of double flanged, Cl body, ISi marked NR V of approved make of following sizes | BI01010001010000000000000515BI0100001121 | ||
| 39 | 39 | 65mm dia | BI01010001010000000000000515BI0100001122 | 1 | Each |
| 40 | 40 | 80 mm dia | BI01010001010000000000000515BI0100001123 | 1 | Each |
| 41 | 41 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and commissioning of Engineer-in-charge. MS pipe specials upto 600mm dia (with minimum 5mm thickness sheet) | BI01010001010000000000000515BI0100001124 | 1 | Kgs |
| 42 | 42 | Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to I 0 kg. including all jointing material as per Each 800.00 | BI01010001010000000000000515BI0100001125 | 1 | Each |
| 43 | 43 | Providing & Fixing pump safety cage as per specifications or as directed by Engineer in charge. | BI01010001010000000000000515BI0100001126 | 1 | Each |
| 44 | 44 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter. All kinds of soil. | BI01010001010000000000000515BI0100001127 | 1 | CUM |
| 45 | 45 | Providing, lowering, laying and jointing in trenches. standard lengths HDPE ISi marked Pipes as per IS-4984: l 995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and di rection of Engineer-in-charge of following class and diameter.(excluding earth work)Note : Providing and fixing of all requisite specials as per drawing,design and layout are inclusive in RM measurement of the item and shall not be paid. separately.Supply upto 110 mm dia. in coil & above 110 mm dia straight lengthin 6M. HDPE PE-80 PN-6 | BI01010001010000000000000515BI0100001128 | ||
| 46 | 46 | 90mm dia | BI01010001010000000000000515BI0100001115 | 1 | RM |
| 47 | 47 | 110mm dia | 1 | RM | |
| 48 | 48 | 90mm dia PE 80 PN 10 | 1 | RM | |
| 49 | 49 | 110 mm dia PE 80 PN 10 | BI01010001010000000000000515BI0100001116 | 1 | RM |
AI Tender Summary
Tender Timeline
Jun 08, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 23, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 25, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender