Special Repairs To Water Supply Schme Bursunge Mandoshi Tal. Murbad District Thane
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Jun 2021
0 days left
EMD
9100
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
murbad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repairs To Water Supply Schme Bursunge Mandoshi Tal. Murbad District Thane
BOQ
| Sl. No. | Item Description |
| 1 | 1) Repairs to Pumping Machinery- 3.00 BHP (Elect. Pump)Item No.1. Providing, erecting and giving test of 150 mm diameter submersible pumps set confirming to IS 8043 and IS 9283 Pumps shall be suitable for various delivery head and discharge with stainless steel pump shafts and bronze impeller . Motor suitable for working on 415 Volts + 10%, 3ph, 50 Hz . AC supply ,supply cable guards ,thrust carbon / fiber bearing to accept entire hydraulic thrust. Waterproof winding shall be provided .The pump sets shall be suitable for direct coupling. Pumps shall have suitable outlet as per manufacturer’s design. Anti-thrust stream-lined non-return valve shall be provided with pump. Suitable strainer Shall be provided. 3 core, single / double Run copper conductor submersible type flat cable 3mt. and two pairs electronic clamps shall be provided along with the pump.( Up to 15 stages ) 3.00 BHP Submersible pumps –1No., Discharge-- 2500 lph., Heads -- 75 Mt. |
| 2 | Item No.2 Supplying and erection G.I. Pipe of following dia. And class in position suction delivery for centrifugal pump, vacuum pump and drop pipe for submersible pipe. Plumbingwith Sockets and necessary material etc. complete.50 mm dia. G.I. Pipe (Medium class) |
| 3 | Item No.3 Supplying and erection GI pipe of B- Class in position suction delivery for centrifugal pump, vacuum pump and drop pipe for submersible pipe. Plumbingwith Sockets and necessary material etc. complete. 50 mm dia G.I.Bend. |
| 4 | Item No.3 Supplying and erection GI pipe of B- Class in position suction delivery for centrifugal pump, vacuum pump and drop pipe for submersible pipe. Plumbingwith Sockets and necessary material etc. complete. 50 mm dia G.I.Tee |
| 5 | Item No.4 Supplying and erecting flat flexible 3 core 2.5 square mmPVC sheathedA) submersible type copper cable 3 Core –2.50Sqmm. |
| 6 | B) Aluminium Conductor PVC armoured 4 core cable 4 sqmm |
| 7 | Item No.5 Providing & supplying & jointingISI mark CIDF Reflux (nrv)Valve including,railway fright ,inspection charges ,unloading from railway wagon .Loading in to truck , transport to the departmental store / site of work , Unloading, stacking etc. complete.50 mm dia. Reflux valve PN-1 grade |
| 8 | Item No.6 Providing & supplying & jointingISI mark CIDF Sluice valve including, railway fright, inspection charges, unloading from railway wagon. Loading in to truck, transport to the departmental store / site of work, Unloading, stacking etc. complete. 50 mm dia. Sluice valve PN-1 grade |
| 9 | Item No.7 Providing and supplying C.I. D/F angle type spring loaded pressure relief valves of approved make and quality including inspection charges, transportation to departmental stores excluding GST levied by GOI & GOM in all respect etc. complete. 50 mm dia. Pressure relief valve PN-1 grade |
| 10 | Item No.8. Providing, erectingPressure gauge of required capacity complete with siphon tube, isolating cock suitable for 12 mm dia. G.I Pipe, Pressure gauge shall be installed as directed, with tapping on rising main. Pressure Gauge 100 mm dia. |
| 11 | ItemNo.9. Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc |
| 12 | Item No.10. Supplying an erecting cast ironearthplate 60 X 60 X 0.6 cm. buried in specifically prepared earth pit( top edge of of plate 1.5 m. below ground level ) refilling with 30.00kg charcole and salt in alternate layers , necessary length of double earth strip connection to the plate with cadminium plate GI nutbolts 12 mm dia with bituminious compound connected to the nearest switchgear with end socket as per direction and duly tested by earth tester and recording the results supplying and erecting and erecting 19 mm dia vertical gi pipe 1.5 M long with funnel and mesh at top is included in the scope of work. Plate type electrod. |
| 13 | Item No.11. Iron work for Pannel board or for other purpose etc completed with bending, cutting, drilling, welding complete errected on position necessary materrials duly painted with 1 coat of red oxide & 2 coat of enamal paints etc complete. |
| 14 | Item No.12. Supplying and erecting marine plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete. |
| 15 | Item No.13.Point wiring for light/ fan/bell consealed type in min 20 mm PVC conduit with 1.5 sq.mm FR grade copper wires, modular type swich and socket, earthing required accessaries .etc complete. |
| 16 | Item No.14. Providing & Supplying of various type of tools as per requirement etc. complete. |
| 17 | 2) Repairs to Rising Main Item No.1 :- Dismentalling dead pipe line of following class and dia. Including necessary excavation and refilling etc. complete.Up to 80 mm dia GI pipes |
| 18 | Item No.2 :- Excavation for foundation / pipe trenches in earth soil of all types, sand, gravel & soft murum including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete. a) Lift 0 to 1.50 M. |
| 19 | Item No.3 :- Excavation for foundation / pipe trenches in hard murum and boulders including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 20 | Item No.4 :- Excavation for foundation / pipe trenches in soft rock by controlled blasting, including trimming & leveling the bed by chiselling where necessary & removing the excavated material & stacking it in measurable heaps within a distance of 50 m from the area & lifts as below, normal dewatering, excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 21 | Item No.5:- Filling in plinth and floors / trenches murum bedding with approved murum from excavated materials from foundation inin 15 to 20 cm. layers including watering,compaction etc. complete. |
| 22 | Item No.6 :- Providing and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 /14151 / 12786 /13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays &rains, excluding GST levied by GI & GOM in all respect etc. complete. 90 mm dia. HDPE Pipe(10.00 Kg/cm) PE-100 |
| 23 | Item No. 7 :- Providing & Supplying G.I.Specials etc. complete75 mm dia. G.I. Bend |
| 24 | Item No. 7 :- Providing & Supplying G.I.Specials etc. complete75 mm dia. G.I. Tee |
| 25 | Item No.8 :-Lowering, Laying and Jointing H. D. P. E./ M.D.P.E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II .90 mm dia. HDPE Pipe(10.00 Kg/cm) |
| 26 | Item No.9:- Providing & supplying Air valves as per IS-10845 & MJP\"s standard specifications of approved make & quality of following diameter including all taxes , all transportation charges, inspection charges loading, unloading & stacking etc complete15 mm Type PN-1 |
| 27 | Item No.10 :- Lowetring, laying & fixing in proper alignment & position all types of CI air valves as directed by Engineer-In-Charge including cost of all transportation, cost of all material & giving satisfactory hydraulic testing etc complete.15 mm Type PN-1 |
| 28 | Item No.11 :- Providing and laying in situ Plain Cement concrete in proportion M-150 of trap metal for foundation & bedding, includingout water manually, form work, capacity & caring etc complete. |
| 29 | Item No.12 :- Refilling the trenches from excavated stuff with soft material in 15 cm layers with all leads & lifts including consolidation surcharging … etc complete. |
| 30 | 3) Repairs to RCC/ ESR Item No.1 :- Providing and applying three coat of water proof cement paint of approved manufacture and colour to the plastered surface, including scaffolding preparing the surface, watering for two days etc. complete. |
| 31 | Item No.2 :- Providing and applying two coats of synthetic enamel paint of approved colour to new/old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. |
| 32 | Item No.3 :- Providing & fixingin position of M.S.Ladder 0.50M wide consisting of 75 x 10 mm M.S.flats as strigers and 16mm dia. M.S.bars in double rowsas steps placed at 25cm c/c including cost of materials & labour involved, welding, ancharing and applying 3 coat of anti-corrosive paint, etc. complete as directed by Engineer-in-charge. etc complete. |
| 33 | Item No.4 :- Providing & fixing in position steel fibre reinforced concrete (S.F.R.C.) frame and covers of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer -in-charge (20 tonnes capacity) 90 cm x 45 cm size |
| 34 | Item No.4 :- Providing & Making Name plate on ESR structure with oil paint etc complete. 2.00 m x 1.00 m size |
| 35 | 4) Repairs to Distribution System Item No.1 :- Dismentalling dead pipe line of following class and dia. Including necessary excavation and refilling etc. complete.Up to 80 mm dia GI pipes |
| 36 | Item No.2 :- Excavation for foundation / pipe trenches in earth soil of all types, sand, gravel & soft murum including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete. a) Lift 0 to 1.50 M. |
| 37 | Item No.3 :- Excavation for foundation / pipe trenches in hard murum and boulders including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 38 | Item No.4 :- Excavation for foundation / pipe trenches in soft rock by controlled blasting, including trimming & leveling the bed by chiselling where necessary & removing the excavated material & stacking it in measurable heaps within a distance of 50 m from the area & lifts as below, normal dewatering, excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 39 | Item No.5:- Filling in plinth and floors / trenches murum bedding with approved murum from excavated materials from foundation inin 15 to 20 cm. layers including watering,compaction etc. complete. |
| 40 | Item No.6 :-Providing & supplying ISI mark G.I pipes Of following Class. & Dia including all taxes (Central and local ) insurance,railway freight,unloading from railway wagon,loading into trucks ,transport to departmental stores /site ,unloading, stacking etc. complete.( IS-1536/1989) 65 mm dia. G.I.Pipe(medium class) - 6.63 kg/m |
| 41 | Item No.6 :-Providing & supplying ISI mark G.I pipes Of following Class. & Dia including all taxes (Central and local ) insurance,railway freight,unloading from railway wagon,loading into trucks ,transport to departmental stores /site ,unloading, stacking etc. complete.( IS-1536/1989) 50 mm dia. G.I.Pipe(medium class) - 5.16 kg/m |
| 42 | Item No.6 :-Providing & supplying ISI mark G.I pipes Of following Class. & Dia including all taxes (Central and local ) insurance,railway freight,unloading from railway wagon,loading into trucks ,transport to departmental stores /site ,unloading, stacking etc. complete.( IS-1536/1989)40 mm dia. G.I.Pipe(medium class) - 3.96 kg/m |
| 43 | Item No.7 :- Providing & Supplying G.I.Specials etc complete 65 mm dia. G.I. Specials Bend |
| 44 | Item No.7 :- Providing & Supplying G.I.Specials etc complete 65 mm dia. G.I. Specials Tee |
| 45 | Item No.7 :- Providing & Supplying G.I.Specials etc complete 50 mm dia. G.I. Specials Bend |
| 46 | Item No.7 :- Providing & Supplying G.I.Specials etc complete 50 mm dia. G.I. Specials Tee |
| 47 | Item No.7 :- Providing & Supplying G.I.Specials etc complete 50 mm dia. G.I. Specials Union |
| 48 | Item No.7 :- Providing & Supplying G.I.Specials etc complete 50 mm dia. G.I. Specials Elbow |
| 49 | Item No.7 :- Providing & Supplying G.I.Specials etc complete 40 mm dia. G.I. Specials Bend |
| 50 | Item No.7 :- Providing & Supplying G.I.Specials etc complete 40 mm dia. G.I. Specials Tee |
| 51 | Item No.7 :- Providing & Supplying G.I.Specials etc complete 40 mm dia. G.I. Specials Union |
| 52 | Item No.7 :- Providing & Supplying G.I.Specials etc complete 40 mm dia. G.I. Specials Elbow |
| 53 | Item No.8 :-Lowering , laying & jointing withHDPE/ G.I. pipes and specials of following class and dia. including conveyance from stores to site of work, all labour, giving satisfacyory hydraulic test , etc. complete either underground or in verticle position , H. D. P. E./ M.D.P.E. pipes in proper position including all specials by compression fitting /electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by Engineer-In-Charge. 65 mm dia. G.I.Pipe(medium class) |
| 54 | Item No.8 :-Lowering , laying & jointing withHDPE/ G.I. pipes and specials of following class and dia. including conveyance from stores to site of work, all labour, giving satisfacyory hydraulic test , etc. complete either underground or in verticle position , H. D. P. E./ M.D.P.E. pipes in proper position including all specials by compression fitting /electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by Engineer-In-Charge. 50 mm dia. G.I.Pipe(medium class) |
| 55 | Item No.8 :-Lowering , laying & jointing withHDPE/ G.I. pipes and specials of following class and dia. including conveyance from stores to site of work, all labour, giving satisfacyory hydraulic test , etc. complete either underground or in verticle position , H. D. P. E./ M.D.P.E. pipes in proper position including all specials by compression fitting /electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by Engineer-In-Charge.40 mm dia. G.I.Pipe(medium class) |
| 56 | Item No.9 : - Providing double flanges Sluice Valve conferming IS 2906/14846 Incl worn gear arrangement as per test pressure stainless steel spindle, cap,inl. All taxes transportation etc. complete. 65 mm dia. S.V.( PN-1) |
| 57 | Item No.9 : - Providing double flanges Sluice Valve conferming IS 2906/14846 Incl worn gear arrangement as per test pressure stainless steel spindle, cap,inl. All taxes transportation etc. complete. 50 mm dia. S.V.( PN-1) |
| 58 | Item No.10: - Lowering & laying and jointing in position following CIDF/Refluxe valve,Butterfly valve and Sluice valve incl. cost of all labour jointing material incl. nuts bolts and giving satisfactory hydraulic tesing etc complete.65 mm dia. S.V.( PN-1) |
| 59 | Item No.10: - Lowering & laying and jointing in position following CIDF/Refluxe valve,Butterfly valve and Sluice valve incl. cost of all labour jointing material incl. nuts bolts and giving satisfactory hydraulic tesing etc complete.50 mm dia. S.V.( PN-1) |
| 60 | Item No.11 :- Providing & constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCCbedding , B.B. masonryin C.M. 1:5 proportion, precast R.C.C. frame & cover etc. complete. 60 X 45 X 90 cm. |
| 61 | Item No.12 : - Supplying and erecting Gun metal sluice valve at position with necessary materials complete. 50 mm dia. gun metal sluice valve |
| 62 | Item No.12 : - Supplying and erecting Gun metal sluice valve at position with necessary materials complete. 40 mm dia. gun metal sluice valve |
| 63 | Item No.13 :- Providing and laying in situ Plain Cement concrete in proportion M-150 of trap metal for foundation & bedding, including out water manually, form work, capacity & caring etc…… complete. |
| 64 | Item No.14 :- Refilling the trenches from excavated stuff with soft material in 15 cm layers with all leads & lifts including consolidation surcharging … etc complete. |
AI Tender Summary
Tender Timeline
Jun 04, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedJun 21, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 21, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender