| 1 | 1 | Dismentling sone rubble masonry including stacking of serviceable material and disposal of unserviceable material within 50 meter lead. In Cement Mortar | BI01010001010000000000000515BI0100001113 | 5 | Cum. |
|---|
| 2 | 2 | Brick masonary in foundation and plinth with bricks of class designation 75 mm. IS 2212-1991 in : Cement Sand Mortar 1:5 (1-Cement:5-coarse sand). Add extra over item No. 5.1 for brick work in superstructure up to third storey IS 1077-1986. | BI01010001010000000000000515BI0100001114 | 30 | Cum. |
|---|
| 3 | 3 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall IS 1597 (Part-I) 1992 in : Cement sand mortar 1:6 (1 cement:6 sand) | BI01010001010000000000000515BI0100001115 | 10 | Cum. |
|---|
| 4 | 4 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000: 1:2:4 (1 cement:2 Course Sand:4 Graded Stone Aggregate 20 mm nominal Size) | BI01010001010000000000000515BI0100001116 | 15 | Cum |
|---|
| 5 | 5 | Supplying and fixing Soorsagar Bhura or equivalent ashlar sills, lintels, dassa, bearing bed and top surface made perfenctly even, jambs, skirting steps etc. rough Upto 15 Cm Thick | BI01010001010000000000000515BI0100001117 | 0.38 | Sqm |
|---|
| 6 | 6 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. Complete fine finished : 20 mm thick | BI01010001010000000000000515BI0100001118 | 150 | Sqm |
|---|
| 7 | 7 | Distempring with oil bound washable distemper of approved brand and manufacture to given an even shade including all scaffolding. New work (two or more coats) over and including scrapping and priming coat with cement primer. | BI01010001010000000000000515BI0100001119 | 150 | Sqm |
|---|
| 8 | 8 | Providing and fixing welded mesh/expanded metal mesh\nin frame work, flat iron beading 20x3mm including top\ncross laps inside and out sides welding, iron bolts,\nscrews, clips etc. complete (excluding frame work) of\nsize. Welded mesh 25 x 25mm x 16 gauge. | BI01010001010000000000000515BI0100001120 | 60 | Sqm |
|---|
| 9 | 9 | Supplying & Fixing fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws at not exceeding 150mm distance at all heights with all lead and lift with scafolding. | BI01010001010000000000000515BI0100001121 | 55 | Sqm |
|---|
| 10 | 10 | Providing and fixing steel gate grating and grills made of\nangles, tees, square bars or other flats black pipe with\nholdfast and fittings complete as per design and drawing\nincluding cutting welding and fabrication with priming\ncoat of red oxide. | BI01010001010000000000000515BI0100001122 | 100 | Kg |
|---|
| 11 | 11 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.Add extra if square, rectangular hollow tubular sections\nare used | BI01010001010000000000000515BI0100001123 | 250 | Kg |
|---|
| 12 | 12 | Painting with enamel paint of approved brand and\nmanufacture to give an even shade: Two or more coats on new work | BI01010001010000000000000515BI0100001125 | 170 | Sqm |
|---|
| 13 | 13 | Providing & fixing MS Sheet single leaf door shutters in angle iron frame 35X35X5 mm suitablly diagnonally braced with 25x3 mm flat ironabove and below lock rail of size 50x5 mm beading extra including all fittings, as per direction of Engineer incharge but excluding cost of chokhats including two coats of anti corrosive red oxide primer paint. MS Sheet 18 SWG | BI01010001010000000000000515BI0100001126 | 5.5 | Sqm |
|---|
| 14 | 14 | Supply and installation of Multi Rib Proofing/cladding Sheet Manufacture out of 0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvaiumeseel (as per 150gsm zinc aluminum coated 550Mpa tuekd strength)confirming to IS: 1397/astm A-792 sheet to have wide pens 30mm high NB at 250 centre and centre width of 1020mm shets be casted with regular modified plyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate at made at to prevent leakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated hox head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one length and foe a minimum up to 12mts with all scaffolding. 0.60 mm thick | BI01010001010000000000000515BI0100001127 | 100 | Sqm |
|---|
| 15 | 15 | Distempring with oil bound washable distemper of approved brand and manufacture to given an even shade including all scaffolding. Old work (One or more coats ) includibg scrapping of surface and necessary repairs. Same colour | BI01010001010000000000000515BI0100001128 | 2000 | Sqm |
|---|
| 16 | 16 | Polished Blue Kota Stone flooring skirting, laid over\n20 mm thick base of C.M. 1:4 and jointed with grey\ncement slurry to match the shade of the slab including\nrubbing and polishing complete :For area of each slab up to 900 Sq. Cm : 25 mm thick slab | BI01010001010000000000000515BI0100001129 | 90 | Sqm |
|---|
| 17 | 17 | Proviing and fixing G.I. (External work) with G.I. Fittings (IS: 1239 Mark ) including trenching& refilling earth Etc. 25 mm dia nominal bore | BI01010001010000000000000515BI0100001130 | 100 | Mtr |
|---|
| 18 | 18 | Repair to cement plaster in cement mortar 1:6 (1-\nCement:6-fine sand) including removal of old\nplaster in regular shape and white or colour washing. | BI01010001010000000000000515BI0100001131 | 500 | Sqm |
|---|
| 19 | 19 | Renewing glass panes, with puty and nails wherever\nnecessary: 4mm thick plain glass panes | BI01010001010000000000000515BI0100001132 | 20 | Sqm |
|---|
