Empanlment Of Contractor For Executing Special Repair Renovation Modification Work Civil Ph And Ei At Mamc Agroha For The Year 2021-22 Works Upto The Cost Of Rs . 5 . 00 Lakhs, Maharaja Agrasen Medical College Agroha (Hisar)-Haryana

TDR : 28088128

Tender Notice
BOQ

Expired

Maharaja Agrasen Medical College Agroha (Hisar) , Haryana

Tender Brief : Empanlment Of Contractor For Executing Special Repair Renovation Modification Work Civil Ph And Ei At Mamc Agroha For The Year 2021-22 Works Upto The Cost Of Rs . 5 . 00 Lakhs

Document Fees
₹ 1000 /-

EMD
₹ 10000.0 /-

Tender Value
Refer document

Submission Date
21-06-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Repair and renovation of Lecture Theatre (250 seats) Building at M.A.M.C., Agroha
1	1	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 4.12\n4.12.1 All kinds of soil	BI01010001010000000000000515BI0100001113	1	cum
2	2	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. HSR 4.14\n4.14.1 All kinds of soil.	BI01010001010000000000000515BI0100001114	1	cum
3	3	Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : HSR 4.16 \n4.16.1 All kinds of soil\n4.16.1.1 Pipes, cables etc, not exceeding 80 mm dia.	BI01010001010000000000000515BI0100001115	1	metre
4	4	4.16.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia	BI01010001010000000000000515BI0100001116	1	metre
5	5	4.16.1.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm	BI01010001010000000000000515BI0100001117	1	metre
6	6	Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured):HSR 5.5\n5.5.2 In cement mortar	BI01010001010000000000000515BI0100001118	1	cum
7	7	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. HSR 5.7 \n5.7.4 In cement mortar	BI01010001010000000000000515BI0100001119	1	cum
8	8	Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): HSR 5.8\n5.8.3 From brick work in cement mortar	BI01010001010000000000000515BI0100001120	1	1000 Nos.
9	9	Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. HSR 5.28	BI01010001010000000000000515BI0100001121	1	kg
10	10	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. HSR 5.23\n5.23.2 Nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix)	BI01010001010000000000000515BI0100001122	1	cum
11	11	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : HSR 5.29 \n5.29.1 Of area 3 sq. metres and below	BI01010001010000000000000515BI0100001123	1	each
12	12	5.29.2 Of area beyond 3 sq. metres	BI01010001010000000000000515BI0100001124	1	each
13	13	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : HSR 5.3\n5.30.1 Of area 3 sq. metres and below	BI01010001010000000000000515BI0100001125	1	each
14	14	Removing rolling shutters including top cover, brackets and side guides etc.complete.HSR 5.41	BI01010001010000000000000515BI0100001126	1	sqm
15	15	Dismantling cement conglomerate / terrazzo floors 25 mm to 50 mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge.	BI01010001010000000000000515BI0100001127	1	sqm
16	16	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. HSR 5.43 \n5.43.1 For thickness of tiles 10 mm to 25 mm	BI01010001010000000000000515BI0100001128	1	sqm
17	17	5.43.2 For thickness of tiles above 25 mm and up to 40 mm	BI01010001010000000000000515BI0100001129	1	sqm
18	18	Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. HSR 5.49	BI01010001010000000000000515BI0100001130	1	sqm
19	19	Removal of old broken glass panes (any thickness or size, quality or description) from wooden frames, glazed with putty or fixed with beads HSR 5.5	BI01010001010000000000000515BI0100001131	1	sqm
20	20	Removing old broken/serviceable glass of any thickness or size or description except polished plate glass from old wood or metal frames etc.(any thickness or size) hacking out old putty etc. including making good breakages in talking out and handling complete HSR 5.51	BI01010001010000000000000515BI0100001132	1	sqm
21	21	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. HSR 5.70	BI01010001010000000000000515BI0100001133	1	cum
22	22	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: HSR 6.1\n6.1.1 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001134	1	cum
23	23	6.1.2 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001135	1	cum
24	24	6.1.4 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001136	1	cum
25	25	6.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)	BI01010001010000000000000515BI0100001137	1	cum
26	26	6.1.6 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)	BI01010001010000000000000515BI0100001138	1	cum
27	27	Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) HSR 6.8\n6.8.2 40mm thick	BI01010001010000000000000515BI0100001139	1	sqm
28	28	12 mm thick cement plaster damp-proof course 1:3 with 2 coats of bitumen at 1.65 kg. per sqm, laid hot and sanded: HSR 6.11\n6.11.1 Vertical	BI01010001010000000000000515BI0100001140	1	sqm
29	29	6.11.2 Horizontal	BI01010001010000000000000515BI0100001141	1	sqm
30	30	6.33.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.	BI01010001010000000000000515BI0100001142	1	kg
31	31	Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. HSR 6.39\n6.39.1 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).	BI01010001010000000000000515BI0100001143	1	cum
32	32	Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in:HSR 7.21\n7.21.1 Cement mortar 1:4 (1 cement : 4 coarse sand)	BI01010001010000000000000515BI0100001144	1	cum
33	33	7.21.2 Cement mortar 1:6 (1 cement : 6 coarse sand)	BI01010001010000000000000515BI0100001145	1	cum
34	34	Brick work with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : HSR 7.22\n7.22.1 Cement mortar 1:4 (1 cement : 4 coarse sand)	BI01010001010000000000000515BI0100001146	1	cum
35	35	7.22.2 Cement mortar 1:6 (1 cement : 6 coarse sand)	BI01010001010000000000000515BI0100001147	1	cum
36	36	Brick work with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : Based on HSR 7.22\n7.22.1 Cement mortar 1:4 (1 cement : 4 coarse sand) If individuals quantity less than 0.5 cum for repair work.	BI01010001010000000000000515BI0100001148	1	cum
37	37	Half brick masonry with common burnt clay non-modular bricks of class designation 7.5 in foundations and plinth in : HSR 7.27\n7.27.1 Cement mortar 1:3 (1 cement : 3 coarse sand)	BI01010001010000000000000515BI0100001149	1	sqm
38	38	7.27.2 cement mortar 1:4 (1 cement : 4 coarse sand)	BI01010001010000000000000515BI0100001150	1	sqm
39	39	Half brick masonry with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level. HSR 7.28\n7.28.1 Cement mortar 1:3 (1 cement :3 coarse sand)	BI01010001010000000000000515BI0100001151	1	sqm
40	40	7.28.2 Cement mortar 1:4 (1 cement :4 coarse sand)	BI01010001010000000000000515BI0100001152	1	sqm
41	41	Extra for half brick masonry in superstructure, above floor IV level for every three floors or part thereof by mechanical means. HSR 7.29	BI01010001010000000000000515BI0100001153	1	sqm
42	42	Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay non-modular bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand). HSR 7.55	BI01010001010000000000000515BI0100001154	1	metre
43	43	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. HSR 8.26\n8.26.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble\n8.26.1.1 Area of slab up to 0.50 sqm	BI01010001010000000000000515BI0100001155	1	sqm
44	44	8.26.1.2 Area of slab over 0.50 sqm	BI01010001010000000000000515BI0100001156	1	sqm
45	45	8.26.2 Granite of any colour and shade\n8.26.2.1 Area of slab up to 0.50 sqm	BI01010001010000000000000515BI0100001157	1	sqm
46	46	2.26.2.2 Area of slab over 0.50 sqm	BI01010001010000000000000515BI0100001158	1	sqm
47	47	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. HSR 8.27\n8.27.1 Marble work	BI01010001010000000000000515BI0100001159	1	metre
48	48	8.27.2 Granite work	BI01010001010000000000000515BI0100001160	1	metre
49	49	Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.	BI01010001010000000000000515BI0100001161	1	each
50	50	Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.	BI01010001010000000000000515BI0100001162	1	sqm
51	51	Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. HSR 8.3\n8.30.1 White Agaria Marble Stone	BI01010001010000000000000515BI0100001163	1	sqm
52	52	8.30.2 Granite Stone of approved shade	BI01010001010000000000000515BI0100001164	1	sqm
53	53	Hoisting R.C.C. lintels and placing in position up to floor IV level HSR 9.1	BI01010001010000000000000515BI0100001165	1	cum
54	54	Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. HSR 9.22\n9.22.2 0.80 mm thick with zinc coating not less than 275 gm/m²	BI01010001010000000000000515BI0100001166	1	sqm
55	55	Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc.: HSR 9.23\n9.23.2 0.80 mm thick	BI01010001010000000000000515BI0100001167	1	metre
56	56	Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately): HSR 9.42\n9.42.1 12 mm thick	BI01010001010000000000000515BI0100001168	1	sqm
57	57	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :HSR 9.46\n9.46.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)	BI01010001010000000000000515BI0100001169	1	sqm
58	58	9.46.2 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks)	BI01010001010000000000000515BI0100001170	1	sqm
59	59	9.46.3 12.5 mm thick tapered edge gypsum moisture resistant board	BI01010001010000000000000515BI0100001171	1	sqm
60	60	Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. HSR 9.47\n9.47.1 GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending	BI01010001010000000000000515BI0100001172	1	sqm
61	61	Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm centre to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centres with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : HSR 9.49\n9.49.1 GI Metal Ceiling Clip in plain Bevelled edge global white colour tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.	BI01010001010000000000000515BI0100001173	1	sqm
62	62	9.49.2 GI Metal Ceiling Clip in plain Bevelled edge global white colour tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.	BI01010001010000000000000515BI0100001174	1	sqm
63	63	Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class Kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): HSR 9.52\n9.52.1 Flat surfaces	BI01010001010000000000000515BI0100001175	1	sqm
64	64	9.52.2 Curved surfaces	BI01010001010000000000000515BI0100001176	1	sqm
65	65	Supplying and fixing in position 60 cm long G.I. pipe class ‘B’ spouts in chajjas and cantilevers HSR 9.55\n9.55.5 50 mm internal dia	BI01010001010000000000000515BI0100001177	1	metre
66	66	Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 fine sand). HSR 9.56\n9.56.1 Stone ware spout	BI01010001010000000000000515BI0100001178	1	each
67	67	Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. HSR 9.57\n9.57.1 75 mm diameter	BI01010001010000000000000515BI0100001179	1	metre
68	68	9.57.2 110 mm diameter	BI01010001010000000000000515BI0100001180	1	metre
69	69	9.57.3 150 mm diameter	BI01010001010000000000000515BI0100001181	1	metre
70	70	Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. HSR 9.59\n9.59.1 75 mm	BI01010001010000000000000515BI0100001182	1	each
71	71	9.59.2 110 mm	BI01010001010000000000000515BI0100001183	1	each
72	72	9.59.3 150 mm	BI01010001010000000000000515BI0100001184	1	each
73	73	Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. HSR 9.6	BI01010001010000000000000515BI0100001185	1	each
74	74	Providing and laying of screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping. HSR 10.4	BI01010001010000000000000515BI0100001186	1	sqm
75	75	Providing and laying of conglomerate floor 50mm thick cement concrete topping 1:2:4 HSR 10.7	BI01010001010000000000000515BI0100001187	1	sqm
76	76	Providing and laying of conglomerate floor 40mm thick cement concrete topping 1:2:4 HSR 10.8	BI01010001010000000000000515BI0100001188	1	sqm
77	77	Providing a floating coat of 1.50 mm thick neat cement laid in one operation to the topping. HSR 10.14	BI01010001010000000000000515BI0100001189	1	sqm
78	78	Providing and laying cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. HSR 10.16	BI01010001010000000000000515BI0100001190	1	cum
79	79	Providing and fixing glass strips in joints of terrazzo/ cement concrete floors. HSR 10.22\n10.22.1 40 mm wide and 4 mm thick	BI01010001010000000000000515BI0100001191	1	metre
80	80	Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). HSR 10.30\n10.30.3 Dark shade pigment using ordinary cement	BI01010001010000000000000515BI0100001192	1	sqm
81	81	10.30.4 Ordinary cement without any pigment	BI01010001010000000000000515BI0100001193	1	sqm
82	82	Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. HSR 10.31\n10.31.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)\n10.31.1.1 Acid and alkali resistant tile	BI01010001010000000000000515BI0100001194	1	sqm
83	83	10.31.2 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)\n10.31.2.1 Acid and alkali resistant tile	BI01010001010000000000000515BI0100001195	1	sqm
84	84	Providing and laying of tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. HSR 10.32 \n10.32.1 Marble tiles (polished) Raj Nagar\n10.32.1.1 8 mm thick	BI01010001010000000000000515BI0100001196	1	Sqm
85	85	Providing and laying of brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 10.33\n10.33.1 1:4 (1 cement : 4 coarse sand)	BI01010001010000000000000515BI0100001197	1	sqm
86	86	FLAT BRICK OR TILE FLOORING HSR 10.35\n10.35.1 Providing and laying of flat brick or tile flooring with bricks of class designation 7.5 laid in cement sand mortar 1:4 on 100 mm thick cement concrete 1:8:16 and 100 mm sand filling and cement pointing 1:2 on top.	BI01010001010000000000000515BI0100001198	1	sqm
87	87	Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : HSR 10.37\n10.37.1 25 mm thick	BI01010001010000000000000515BI0100001199	1	sqm
88	88	Providing and fixing of Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. HSR 10.38	BI01010001010000000000000515BI0100001200	1	sqm
89	89	Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. HSR 10.42	BI01010001010000000000000515BI0100001201	1	metre
90	90	Providing and laying Baroda Green marble stone 17mm and above thick in risers of step, skirting , dado, pillars and wall lining included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of marble including rubbing and polishing. The rates are for all heights / storey. The sample shall be got approved from Engineer In Charge. HSR 10.47	BI01010001010000000000000515BI0100001202	1	sqm
91	91	Providing and laying Baroda Green marble stone 17mm and above thick flooring included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1:3 and jointed with white slurry mixed with pigment to match the shade of marble including rubbing and polishing. The rates are for all heights / storey. The sample shall be got approved from Engineer In Charge. HSR 10.48	BI01010001010000000000000515BI0100001203	1	sqm
92	92	Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : HSR 10.49\n10.49.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.	BI01010001010000000000000515BI0100001204	1	sqm
93	93	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 10.5\n10.50.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.	BI01010001010000000000000515BI0100001205	1	sqm
94	94	Providing and fixing granite stone in all shades 15mm to 18 mm thick in skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc. HSR 10.51	BI01010001010000000000000515BI0100001206	1	sqm
95	95	Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. HSR 10.52\n10.52.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.	BI01010001010000000000000515BI0100001207	1	sqm
96	96	Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. HSR 10.53\n10.53.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.	BI01010001010000000000000515BI0100001208	1	sqm
97	97	Providing and fixing 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : HSR 10.54\n10.54.1 Second class teak wood	BI01010001010000000000000515BI0100001209	1	sqm
98	98	10.54.2 Second class deodar wood	BI01010001010000000000000515BI0100001210	1	sqm
99	99	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. HSR 10.57	BI01010001010000000000000515BI0100001211	1	sqm
100	100	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. HSR 10.58	BI01010001010000000000000515BI0100001212	1	sqm
101	101	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. HSR 10.59	BI01010001010000000000000515BI0100001213	1	sqm
102	102	Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. HSR 10.60	BI01010001010000000000000515BI0100001214	1	sqm
103	103	Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. HSR 10.61	BI01010001010000000000000515BI0100001215	1	sqm
104	104	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. HSR 10.62	BI01010001010000000000000515BI0100001216	1	sqm
105	105	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. HSR 10.63\n10.63.2 Size of Tile 600x600 mm	BI01010001010000000000000515BI0100001217	1	sqm
106	106	10.63.3 Size of Tile 800x800 mm	BI01010001010000000000000515BI0100001218	1	sqm
107	107	Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm HSR 10.64	BI01010001010000000000000515BI0100001219	1	sqm
108	108	Providing and fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. HSR 10.65	BI01010001010000000000000515BI0100001220	1	sqm
109	109	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. HSR 10.67\n10.67.2 Size of Tile 600x600 mm	BI01010001010000000000000515BI0100001221	1	sqm
110	110	10.67.3 Size of Tile 800x800 mm	BI01010001010000000000000515BI0100001222	1	sqm
111	111	Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). HSR 10.69\n10.69.2 Size of Tile 600x600 mm	BI01010001010000000000000515BI0100001223	1	sqm
112	112	10.69.3 Size of Tile 800x800 mm	BI01010001010000000000000515BI0100001224	1	sqm
113	113	Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. HSR 10.70\n10.70.2 Size of Tile 600x600 mm	BI01010001010000000000000515BI0100001225	1	sqm
114	114	10.70.3 Size of Tile 800x800 mm	BI01010001010000000000000515BI0100001226	1	sqm
115	115	Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). HSR 10.71\n10.71.2 Size of Tile 600x600 mm	BI01010001010000000000000515BI0100001227	1	sqm
116	116	10.71.3 Size of Tile 800x800 mm	BI01010001010000000000000515BI0100001228	1	sqm
117	117	Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. HSR 10.72	BI01010001010000000000000515BI0100001229	1	sqm
118	118	Providing and fixing ceramic & Glazed tiles/ vitrified tiles/ of any size of approved make in floors / dados, laid in any pattern as specified over base of 3 mm thick adhesive of reputed brands as per IS specification 15477-2004 using 5 Kg. adhesive per sqm area of tiles and jointed with white cement slurry mixed with pigment to match the shade of tiles excluding cost of tiles.HSR 10.73	BI01010001010000000000000515BI0100001230	1	sqm
119	119	Providing and fixing of P.V.C. sheet flexible type conforming to I.S.3462-1966 flooring plain coloured marble or mottled finish on a smooth damp proof base laid with adhesive recommended by manufacturer including pressing the sheet with a suitable tool to get a smooth surface all complete as directed by the Engineer-in-Charge. HSR 10.82\n10.82.2 2.00 mm thick	BI01010001010000000000000515BI0100001231	1	sqm
120	120	10.82.4 3.00 mm thick	BI01010001010000000000000515BI0100001232	1	sqm
121	121	Providing and fixing aluminium strips 2 mm thick complete with nails in floors HSR 10.83\n10.83.2 32 mm Wide	BI01010001010000000000000515BI0100001233	1	metre
122	122	Providing and fixing glass strips,4 mm thick in terrazzo/ cement concrete floors. HSR 10.85\n10.85.1 40 mm wide	BI01010001010000000000000515BI0100001234	1	metre
123	123	10.85.2 32 mm wide	BI01010001010000000000000515BI0100001235	1	metre
124	124	Providing of stamping or making grooves for a depth of 2 mm on top of steps in stair case HSR 10.88	BI01010001010000000000000515BI0100001236	1	sqm
125	125	Providing and fixing flat iron strips 40 mm x 3 mm thick in flooring (in stepping of floors) including cutting, straightening and fixing with nails etc. complete fixed in position. HSR 10.89	BI01010001010000000000000515BI0100001237	1	metre
126	126	Providing and fixing of gun metal cramps 15 mm x 6 mm, 16.5 cm long as per design including cost of mortar HSR 10.90	BI01010001010000000000000515BI0100001238	1	each
127	127	Providing and fixing of copper pins 7.5 cm long of 6mm diameter including cost of mortar. HSR 10.91	BI01010001010000000000000515BI0100001239	1	each
128	128	10.100.2 Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth.	BI01010001010000000000000515BI0100001240	1	cum
129	129	Providing & laying Epoxy Flooring 1.5 mm thick ( overall thickness) with self levelling with Hi- build epoxy primer 100 micron thickness, self leveling epoxy screed 500 micron thickness, FQ sand and self levelling epoxy top coat having thickness 900 microns with all materials as mentioned / required to provide desired finish to the entire satisfaction of Engineer in charge, HSR 10.102	BI01010001010000000000000515BI0100001241	1	sqm
130	130	Mirror polishing on marble work/Granite work/stone work whereever reqired to give high gloss finish complete. HSR 10.104	BI01010001010000000000000515BI0100001242	1	sqm
131	131	Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. HSR 10.106	BI01010001010000000000000515BI0100001243	1	sqm
132	132	10 mm thick cement plaster	BI01010001010000000000000515BI0100001244	1	sqm
133	133	11.4.2 1:3 (1 cement: 3 fine sand)	BI01010001010000000000000515BI0100001245	1	sqm
134	134	12 mm cement plaster of mix : HSR 11.5\n11.5.1 1:2 (1 cement: 2 fine sand)	BI01010001010000000000000515BI0100001246	1	sqm
135	135	11.5.3 1:4 (1 cement: 4 fine sand)	BI01010001010000000000000515BI0100001247	1	sqm
136	136	11.5.4 1:6 (1 cement: 6 fine sand)	BI01010001010000000000000515BI0100001248	1	sqm
137	137	15 mm cement plaster on the rough side of single or half brick wall of mix : HSR 11.6\n11.6.1 1:4 (1 cement: 4 fine sand)	BI01010001010000000000000515BI0100001249	1	sqm
138	138	11.6.2 1:6 (1 cement: 6 fine sand)	BI01010001010000000000000515BI0100001250	1	sqm
139	139	20 mm cement plaster of mix : HSR 11.1\n11.10.1 1:4 (1 cement: 4 coarse sand)	BI01010001010000000000000515BI0100001251	1	sqm
140	140	11.10.2 1:6 (1 cement: 6 coarse sand)	BI01010001010000000000000515BI0100001252	1	sqm
141	141	Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge HSR 11.17	BI01010001010000000000000515BI0100001253	1	sqm
142	142	18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. HSR 11.2	BI01010001010000000000000515BI0100001254	1	sqm
143	143	Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): HSR 11.25\n11.25.1 Flush / Ruled/ Struck or weathered pointing	BI01010001010000000000000515BI0100001255	1	sqm
144	144	11.25.2 Raised and cut pointing	BI01010001010000000000000515BI0100001256	1	sqm
145	145	Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand): HSR 11.26\n11.26.1 Flush/ Ruled/ Struck or weathered pointing	BI01010001010000000000000515BI0100001257	1	sqm
146	146	Cement rendering on plaster 1 mm thick HSR 11.52	BI01010001010000000000000515BI0100001258	1	sqm
147	147	Providing & laying average 6mm thick POP Coating on walls, Ceiling, beams and lintels etc. complete in all respects as approved by the Engineer-In-Charge. HSR 11.57	BI01010001010000000000000515BI0100001259	1	sqm
148	148	Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete HSR 11.58	BI01010001010000000000000515BI0100001260	1	sqm
149	149	Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. HSR 11.59	BI01010001010000000000000515BI0100001261	1	sqm
150	150	White washing with lime to give an even shade : HSR 11.61\n11.61.1 New work (three or more coats)	BI01010001010000000000000515BI0100001262	1	sqm
151	151	Colour washing such as green, blue or buff to give an even shade :HSR 11.62 \n11.62.1 New work (two or more coats) with a base coat of white washing with lime	BI01010001010000000000000515BI0100001263	1	sqm
152	152	11.62.2 New work (two or more coats) with a base coat of whiting	BI01010001010000000000000515BI0100001264	1	sqm
153	153	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : HSR 11.64\n11.64.1 New work (two or more coats) over and including water thinnable priming coat with cement primer	BI01010001010000000000000515BI0100001265	1	sqm
154	154	Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. HSR 11.66\n11.66.1 One coat	BI01010001010000000000000515BI0100001266	1	sqm
155	155	11.66.2 Two coats	BI01010001010000000000000515BI0100001267	1	sqm
156	156	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : HSR 11.67\n11.67.1 Water thinnable cement primer	BI01010001010000000000000515BI0100001268	1	sqm
157	157	Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : HSR 11.71\n11.71.1 Two or more coats on new work	BI01010001010000000000000515BI0100001269	1	sqm
158	158	Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. HSR 11.76	BI01010001010000000000000515BI0100001270	1	sqm
159	159	Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. HSR 11.77	BI01010001010000000000000515BI0100001271	1	sqm
160	160	Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. HSR 11.78	BI01010001010000000000000515BI0100001272	1	sqm
161	161	Painting with oil type wood preservative of approved brand and manufacture : HSR 11.79\n11.79.1 New work (two or more coats)	BI01010001010000000000000515BI0100001273	1	sqm
162	162	Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. HSR 11.80	BI01010001010000000000000515BI0100001274	1	sqm
163	163	Coal tarring two coats on new wood work using 0.16 litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively. HSR 11.81	BI01010001010000000000000515BI0100001275	1	sqm
164	164	Painting the wooden / metal surface with synthetic enamel paint of approved brand and manufacture to give an even shade : HSR 1182\n11.82.1 Two or more coats on new work	BI01010001010000000000000515BI0100001276	1	sqm
165	165	Painting over the wooden/metal surface with aluminium paint of approved brand and manufacture to give an even shade . HSR 11.84\n11.84.1 Two or more coats on new work	BI01010001010000000000000515BI0100001277	1	sqm
166	166	Melamine polishing on wood work (one or more coat). HSR 11.91	BI01010001010000000000000515BI0100001278	1	sqm
167	167	Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade : HSR 11.92\n11.92.1 Two or more coats on new work	BI01010001010000000000000515BI0100001279	1	sqm
168	168	Finishing walls with textured exterior paint of required shade : HSR 11.94\n11.94.1 New work (Two or more coats applied @ 3.28 litre/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm	BI01010001010000000000000515BI0100001280	1	sqm
169	169	Finishing walls with Acrylic Smooth exterior paint of required shade : HSR 11.95\n11.95.1 New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)	BI01010001010000000000000515BI0100001281	1	sqm
170	170	Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : HSR 11.97\n11.97.1 Two or more coats applied on walls @ 1.25 litre/10 sqm over and including one coat of Special primer applied @ 0.75 litre /10 sqm	BI01010001010000000000000515BI0100001282	1	sqm
171	171	11.97.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 litre/10 sqm over an under coat of primer applied @ 0.80 litre/10 sqm of approved brand and manufacture	BI01010001010000000000000515BI0100001283	1	sqm
172	172	Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. HSR 11.114	BI01010001010000000000000515BI0100001284	1	sqm
173	173	Painting two coats with solignum with 2nd quality paint HSR 11.116	BI01010001010000000000000515BI0100001285	1	sqm
174	174	Polyurethane polish (PU) two or more coats to give required finish including two coat of wood sealer Including Preparation of surface/base complete as per specification HSR 11.121	BI01010001010000000000000515BI0100001286	1	sqm
175	175	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) HSR 12.7 \n12.7.2 Kiln seasoned and chemically treated Hollock wood\n12.7.2.2 30 mm thick shutters	BI01010001010000000000000515BI0100001287	1	sqm
176	176	12.7.3 Kiln seasoned selected planks of sheesham wood\n12.7.3.2 30 mm thick shutters	BI01010001010000000000000515BI0100001288	1	sqm
177	177	Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). HSR 12.15	BI01010001010000000000000515BI0100001289	1	sqm
178	178	Deduct for providing pin headed glass panes instead of ordinary float glass panes weighing 4 mm thick in doors, windows and clerestory windows shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). HSR 12.16	BI01010001010000000000000515BI0100001290	1	sqm
179	179	Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, as per directions of Engineer-in-charge: (Note:- Butt hinges and necessary screws shall be paid separately) HSR 12.2\n12.20.2 30 mm thick shutters	BI01010001010000000000000515BI0100001291	1	sqm
180	180	Providing and fixing factory made shutters of Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium 'U' type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws, including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of 'U' beading and hinges will be paid separately). HSR 12.21\n12.21.1 25 mm thick	BI01010001010000000000000515BI0100001292	1	sqm
181	181	Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid separately). HSR 12.22\n12.22.1 12mm thick commercial ply conforming to IS : 1328 BWR type	BI01010001010000000000000515BI0100001293	1	sqm
182	182	Planking of commercial hard wood, such as Hollock, champ, chikrassy and chaplash etc., (Non-coniferous timber other than teak conforming to I.S. specification no.1003 kiln-seasoned) planed on both sides, rebated and fixed in position, including nails and screws, etc:- HSR 12.24\n12.24.4 30 mm thick	BI01010001010000000000000515BI0100001294	1	sqm
183	183	Providing and fixing 25 mm thick shutters for cup board etc. :HSR 12.25\n12.25.1 Panelled or panelled & glazed shutters :\n12.25.1.1 Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws	BI01010001010000000000000515BI0100001295	1	sqm
184	184	12.25.1.2Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws	BI01010001010000000000000515BI0100001296	1	sqm
185	185	12.25.2 Glazed shutters :\n12.25.2.1 Second class teak wood including ISI marked anodized aluminium butt hinges with necessary screws	BI01010001010000000000000515BI0100001297	1	sqm
186	186	12.25.2.2 Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws	BI01010001010000000000000515BI0100001298	1	sqm
187	187	Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): HSR 12.26\n12.26.1 12 mm thick	BI01010001010000000000000515BI0100001299	1	sqm
188	188	12.26.2 18 mm thick	BI01010001010000000000000515BI0100001300	1	sqm
189	189	Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). HSR 12.27\n12.27.1 18 mm thick	BI01010001010000000000000515BI0100001301	1	sqm
190	190	12.27.2 25 mm thick	BI01010001010000000000000515BI0100001302	1	sqm
191	191	Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge HSR 12.30	BI01010001010000000000000515BI0100001303	1	sqm
192	192	Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. HSR 12.31\n12.31.1 With decorative veneering on one side and commercial veneering on other side	BI01010001010000000000000515BI0100001304	1	sqm
193	193	12.31.2 With non decorative veneering on both sides	BI01010001010000000000000515BI0100001305	1	sqm
194	194	Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) HSR 12.35	BI01010001010000000000000515BI0100001306	1	each
195	195	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: HSR 12.37\n12.37.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws	BI01010001010000000000000515BI0100001307	1	sqm
196	196	12.37.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws	BI01010001010000000000000515BI0100001308	1	sqm
197	197	12.37.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws	BI01010001010000000000000515BI0100001309	1	sqm
198	198	Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) HSR 12.38\n12.38.1 On one side only	BI01010001010000000000000515BI0100001310	1	sqm
199	199	Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : HSR 12.49\n12.49.1 20 mm dia (heavy type)	BI01010001010000000000000515BI0100001311	1	metre
200	200	12.49.2 25 mm dia (heavy type)	BI01010001010000000000000515BI0100001312	1	metre
201	201	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. HSR 12.50\n12.50.1 Fixed to steel windows by welding	BI01010001010000000000000515BI0100001313	1	Kg.
202	202	12.50.2 Fixed to openings /wooden frames with rawl plugs screws etc.	BI01010001010000000000000515BI0100001314	1	Kg.
203	203	Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : HSR 1256\n12.56.1 125x90x4.00 mm	BI01010001010000000000000515BI0100001315	1	each
204	204	12.56.2 100x75x3.50 mm	BI01010001010000000000000515BI0100001316	1	each
205	205	12.56.3 75x60x3.10 mm	BI01010001010000000000000515BI0100001317	1	each
206	206	12.56.4 50x40x2.50 mm	BI01010001010000000000000515BI0100001318	1	each
207	207	Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. HSR 12.57\n12.57.1 Overall width 35 mm	BI01010001010000000000000515BI0100001319	1	metre
208	208	12.57.2 Overall width 50 mm	BI01010001010000000000000515BI0100001320	1	metre
209	209	12.57.3 Overall width 65 mm	BI01010001010000000000000515BI0100001321	1	metre
210	210	Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. HSR 12.58	BI01010001010000000000000515BI0100001322	1	each
211	211	Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : HSR 12.59\n12.59.1 300 mm weighing not less than 330 gms	BI01010001010000000000000515BI0100001323	1	each
212	212	12.59.2 250 mm weighing not less than 280 gms	BI01010001010000000000000515BI0100001324	1	each
213	213	12.59.3 200 mm weighing not less than 240 gms	BI01010001010000000000000515BI0100001325	1	each
214	214	Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : HSR 12.60\n12.60.1 150 mm	BI01010001010000000000000515BI0100001326	1	each
215	215	12.60.2 115 mm	BI01010001010000000000000515BI0100001327	1	each
216	216	12.60.3 90 mm	BI01010001010000000000000515BI0100001328	1	each
217	217	Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : HSR 12.65\n12.65.1 300x16 mm	BI01010001010000000000000515BI0100001329	1	each
218	218	Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. HSR 12.75\n12.75.1 125 mm	BI01010001010000000000000515BI0100001330	1	each
219	219	Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : HSR 12.78\n12.78.1 250x10 mm	BI01010001010000000000000515BI0100001331	1	each
220	220	12.78.2 200x10 mm	BI01010001010000000000000515BI0100001332	1	each
221	221	12.78.3 150x10 mm	BI01010001010000000000000515BI0100001333	1	each
222	222	12.78.4 100x10 mm	BI01010001010000000000000515BI0100001334	1	each
223	223	Providing and fixing bright finished brass door latch with necessary screws etc. complete : HSR 12.79 \n12.79.1 300x16x5 mm	BI01010001010000000000000515BI0100001335	1	each
224	224	12.79.2 250x16x5 mm	BI01010001010000000000000515BI0100001336	1	each
225	225	Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. HSR 12.80	BI01010001010000000000000515BI0100001337	1	each
226	226	Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws. HSR 12.84	BI01010001010000000000000515BI0100001338	1	each
227	227	Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.HSR 12.86	BI01010001010000000000000515BI0100001339	1	each
228	228	Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35 kg and door width up to 700 mm), with necessary accessories and screws etc. complete. HSR 12.88	BI01010001010000000000000515BI0100001340	1	each
229	229	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. HSR 12.89	BI01010001010000000000000515BI0100001341	1	each
230	230	Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. HSR 12.90	BI01010001010000000000000515BI0100001342	1	each
231	231	Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. HSR 12.91	BI01010001010000000000000515BI0100001343	1	each
232	232	Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. HSR 12.92\n12.92.1 Size 40 mm	BI01010001010000000000000515BI0100001344	1	each
233	233	12.92.2 Size 50 mm	BI01010001010000000000000515BI0100001345	1	each
234	234	12.92.3 Size 65 mm	BI01010001010000000000000515BI0100001346	1	each
235	235	12.92.4 Size 75 mm	BI01010001010000000000000515BI0100001347	1	each
236	236	Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. HSR 12.93	BI01010001010000000000000515BI0100001348	1	each
237	237	Providing and fixing chromium plated brass handles with necessary screws etc. complete: HSR 19.94\n12.94.1 125 mm	BI01010001010000000000000515BI0100001349	1	each
238	238	12.94.2 100 mm	BI01010001010000000000000515BI0100001350	1	each
239	239	12.94.3 75 mm	BI01010001010000000000000515BI0100001351	1	each
240	240	Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. HSR 12.95	BI01010001010000000000000515BI0100001352	1	each
241	241	Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : HSR 12.96\n12.96.1 300 mm weighing not less than 330 gms	BI01010001010000000000000515BI0100001353	1	each
242	242	12.96.2 250 mm weighing not less than 280 gms	BI01010001010000000000000515BI0100001354	1	each
243	243	12.96.3 200 mm weighing not less than 240 gms	BI01010001010000000000000515BI0100001355	1	each
244	244	Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: HSR 12.97\nNote :- Aluminium hinges shall not be used in wooden shutters, stainless steel hinges shall be preferred.\n12.97.1 125x75x4 mm	BI01010001010000000000000515BI0100001356	1	each
245	245	12.97.2 125x63x4 mm	BI01010001010000000000000515BI0100001357	1	each
246	246	12.97.3 100x75x4 mm	BI01010001010000000000000515BI0100001358	1	each
247	247	12.97.4 100x63x4 mm	BI01010001010000000000000515BI0100001359	1	each
248	248	12.97.5 100x63x3.2 mm	BI01010001010000000000000515BI0100001360	1	each
249	249	12.97.6 75x63x4 mm	BI01010001010000000000000515BI0100001361	1	each
250	250	12.97.7 75x63x3.2 mm	BI01010001010000000000000515BI0100001362	1	each
251	251	12.97.8 75x45x3.2 mm	BI01010001010000000000000515BI0100001363	1	each
252	252	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : HSR 12.98\n12.98.1 300x16 mm	BI01010001010000000000000515BI0100001364	1	each
253	253	12.98.2 250x16 mm	BI01010001010000000000000515BI0100001365	1	each
254	254	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR 12.99\n12.99.1 300x10 mm	BI01010001010000000000000515BI0100001366	1	each
255	255	12.99.2 250x10 mm	BI01010001010000000000000515BI0100001367	1	each
256	256	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR 12.102\n12.102.1 125 mm	BI01010001010000000000000515BI0100001368	1	each
257	257	12.102.2 100 mm	BI01010001010000000000000515BI0100001369	1	each
258	258	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. HSR 103\n12.103.1 Single rubber stopper	BI01010001010000000000000515BI0100001370	1	each
259	259	12.103.2 Twin rubber stopper	BI01010001010000000000000515BI0100001371	1	each
260	260	Providing and fixing aluminium casement stays, ISI marked, anodised transparent or dyed to required colour and shade or powder coated or polyester powder coated, with necessary screws etc. complete.HSR 12.104\n12.104.2 Anodized (AC-15) Aluminium	BI01010001010000000000000515BI0100001372	1	each
261	261	12.104.3 Powder coated minimum thickness 50 micron aluminium	BI01010001010000000000000515BI0100001373	1	each
262	262	Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. HSR 12.105	BI01010001010000000000000515BI0100001374	1	each
263	263	Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod. HSR 12.106	BI01010001010000000000000515BI0100001375	1	each
264	264	Providing Aluminium Jali of thickness 7mm thick with openings - 75mm X 75mm of including anodizing and fixing in frame with cost of screws etc. complete. HSR 12.107	BI01010001010000000000000515BI0100001376	1	each
265	265	Providing fixing aluminium round shape handle of outer dia 100mm with screws etc. complete. HSR 12.108\n12.108.1 Anodized (AC-15) Aluminium	BI01010001010000000000000515BI0100001377	1	each
266	266	12.108.2 Powder coated minimum thickness 50 micron	BI01010001010000000000000515BI0100001378	1	each
267	267	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : HSR 12.157\n12.157.1 For fixed portion\n12.157.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)	BI01010001010000000000000515BI0100001379	1	Kg.
268	268	12.157.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron)	BI01010001010000000000000515BI0100001380	1	Kg.
269	269	12.157.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)	BI01010001010000000000000515BI0100001381	1	Kg.
270	270	12.157.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)\n12.157.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)\n12.157.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron)	BI01010001010000000000000515BI0100001382	1	Kg.
271	271	12.157.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)	BI01010001010000000000000515BI0100001383	1	Kg.
272	272	Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. HSR 12.158\n12.158.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side	BI01010001010000000000000515BI0100001384	1	sqm
273	273	12.158.2 Pre-laminated particle board with decorative lamination on both sides	BI01010001010000000000000515BI0100001385	1	sqm
274	274	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): HSR 12.159\n12.159.1 With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	BI01010001010000000000000515BI0100001386	1	sqm
275	275	12.159.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)	BI01010001010000000000000515BI0100001387	1	sqm
276	276	12.159.3 With float glass panes of 6 mm thickness (weight not less than 15 kg/sqm)	BI01010001010000000000000515BI0100001388	1	sqm
277	277	12.159.4 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)	BI01010001010000000000000515BI0100001389	1	sqm
278	278	Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. HSR 12.16\n12.160.1 With stainless steel cover plate minimum 1.25 mm thickness	BI01010001010000000000000515BI0100001390	1	each
279	279	12.160.2 With brass cover plate minimum 1.25 mm thickness	BI01010001010000000000000515BI0100001391	1	each
280	280	Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. HSR 12.161	BI01010001010000000000000515BI0100001392	1	sqm
281	281	Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete. HSR 12.162\n12.162.1 205 X 19 mm	BI01010001010000000000000515BI0100001393	1	each
282	282	12.162.2 255 X 19 mm	BI01010001010000000000000515BI0100001394	1	each
283	283	12.162.3 355 X 19 mm	BI01010001010000000000000515BI0100001395	1	each
284	284	12.162.4 510 X 19 mm	BI01010001010000000000000515BI0100001396	1	each
285	285	12.162.5 710 X 19 mm	BI01010001010000000000000515BI0100001397	1	each
286	286	Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). HSR 12.171	BI01010001010000000000000515BI0100001398	1	sqm
287	287	Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. HSR 12.173	BI01010001010000000000000515BI0100001399	1	each
288	288	Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). HSR 12.174	BI01010001010000000000000515BI0100001400	1	Kg.
289	289	Providing and fixing 6 mm dia. G.I. level adjusting hangers (up to 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge. HSR 12.175	BI01010001010000000000000515BI0100001401	1	each
290	290	Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. HSR 12.176\n12.176.1 Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)	BI01010001010000000000000515BI0100001402	1	Kg.
291	291	12.176.2 Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron)	BI01010001010000000000000515BI0100001403	1	Kg.
292	292	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): HSR 12.177\n12.177.1 With toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm)	BI01010001010000000000000515BI0100001404	1	sqm
293	293	Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. HSR 13.1\n13.1.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).	BI01010001010000000000000515BI0100001405	1	Kg.
294	294	13.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)	BI01010001010000000000000515BI0100001406	1	Kg.
295	295	Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. HSR 13.2	BI01010001010000000000000515BI0100001407	1	Kg.
296	296	Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: HSR 13.3\n13.3.1 Profile B\n13.3.1.1 Fixing with adjustable lugs with split end tail to each jamb	BI01010001010000000000000515BI0100001408	1	metre
297	297	13.3.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)	BI01010001010000000000000515BI0100001409	1	metre
298	298	13.3.2 Profile C\n13.3.2.1 Fixing with adjustable lugs with split end tail to each jamb	BI01010001010000000000000515BI0100001410	1	metre
299	299	13.3.2.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)	BI01010001010000000000000515BI0100001411	1	metre
300	300	13.3.3 Profile E\n13.3.3..1 Fixing with adjustable lugs with split end tail to each jamb	BI01010001010000000000000515BI0100001412	1	metre
301	301	13.3.3.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)	BI01010001010000000000000515BI0100001413	1	metre
302	302	Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metal-sash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost. HSR 13.7\n13.7.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001414	1	Kg.
303	303	13.7.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)	BI01010001010000000000000515BI0100001415	1	Kg.
304	304	Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). HSR 13.8\n13.8.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001416	1	Kg.
305	305	13.8.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)	BI01010001010000000000000515BI0100001417	1	Kg.
306	306	Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. HSR 13.9\n13.9.1 Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides	BI01010001010000000000000515BI0100001418	1	sqm
307	307	13.9.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides	BI01010001010000000000000515BI0100001419	1	sqm
308	308	Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : HSR 13.10\n13.10.1 4.0 mm thick glass panes	BI01010001010000000000000515BI0100001420	1	sqm
309	309	13.10.2 5.5 mm thick glass panes	BI01010001010000000000000515BI0100001421	1	sqm
310	310	Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with screws instead of glazing clips and metal sash putty, in steel doors, windows, ventilators and composite units. HSR 13.11	BI01010001010000000000000515BI0100001422	1	metre
311	311	Extra for providing and fixing steel beading of MS flat of size 20mm x 3mm section HSR 13.12\n13.12.1 for doors	BI01010001010000000000000515BI0100001423	1	sqm
312	312	13.12.2 For windows	BI01010001010000000000000515BI0100001424	1	sqm
313	313	Providing and fixing hard drawn steel wire fabric 75 mm X 25 mm rectangular mesh with 3.25 mm dia wire fixed on steel windows of standard rolled sections with 3 mm thick flat iron cover moulding of 12.5 mm width fixed with machine screws welded complete in all respect. HSR 13.18	BI01010001010000000000000515BI0100001425	1	sqm
314	314	Providing and fixing galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm fixed on steel windows of standard rolled steel section, with 3 mm thick MS flat iron cover moulding of 12.5 mm width, fixed with machine screws welded complete in all respects. HSR 13.19	BI01010001010000000000000515BI0100001426	1	sqm
315	315	Providing and Fixing Poly Carbonate Sheet 1.25mm thickness on Gates and grills excluding the cost of MS framework but including the cost of nut bolts, Welding rods complete in all respect as per direction of Engineerin-Charge. HSR 13.20	BI01010001010000000000000515BI0100001427	1	sqm
316	316	Providing & fixing glazing in door, window, ventilator shutters and partitions etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of Gasket / beading shall be paid as per respective item) HSR 13.24\n13.24.1 Float glass panes of 5.5mm thickness	BI01010001010000000000000515BI0100001428	1	sqm
317	317	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. HSR 13.29\n13.29.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete	BI01010001010000000000000515BI0100001429	1	Kg.
318	318	13.29.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	BI01010001010000000000000515BI0100001430	1	Kg.
319	319	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. HSR 13.30\n13.30.1 Hot finished welded type tubes	BI01010001010000000000000515BI0100001431	1	Kg.
320	320	13.30.2 Hot finished seamless type tubes	BI01010001010000000000000515BI0100001432	1	Kg.
321	321	13.30.3 Electric resistance or induction butt welded tubes	BI01010001010000000000000515BI0100001433	1	Kg.
322	322	Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. HSR 13.31	BI01010001010000000000000515BI0100001434	1	Kg.
323	323	Providing and fixing bolts including nuts and washers complete. HSR 13.32	BI01010001010000000000000515BI0100001435	1	Kg.
324	324	Supply and Fixing of Tensile Sheet Shed 650GSM sheet with M.S Iron pipe Frame Pole 125mm Heavy Truss M.S Pipe 60mm Heavy, Membrane M.S Pipe 50mm Heavy, Complete With cost of Painting and Labour for Fixing Paint Complete in all respects HSR 13.34	BI01010001010000000000000515BI0100001436	1	sqm
325	325	Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. HSR 13.35	BI01010001010000000000000515BI0100001437	1	sqm
326	326	Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer HSR 13.36	BI01010001010000000000000515BI0100001438	1	sqm
327	327	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. HSR 13.37\n13.37.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover	BI01010001010000000000000515BI0100001439	1	sqm
328	328	13.37.2 80x1.20 mm M.S. laths with 1.20 mm thick top cover	BI01010001010000000000000515BI0100001440	1	sqm
329	329	13.37.3 80x0.90 mm M.S. laths with 0.90 mm thick top cover	BI01010001010000000000000515BI0100001441	1	sqm
330	330	Providing and fixing ball bearing for rolling shutters. HSR 13.38	BI01010001010000000000000515BI0100001442	1	each
331	331	Extra for providing mechanical device chain and crank operation for operating rolling shutters. HSR 13.39\n13.39.1 Exceeding 10.00 sqm and up to 16.80 sqm in the area	BI01010001010000000000000515BI0100001443	1	sqm
332	332	13.39.2 Exceeding 16.80 sqm in area	BI01010001010000000000000515BI0100001444	1	sqm
333	333	Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured). HSR 13.40	BI01010001010000000000000515BI0100001445	1	sqm
334	334	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). HSR 13.41	BI01010001010000000000000515BI0100001446	1	Kg.
335	335	Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. HSR 13.42\n13.42.1 M.S. tube	BI01010001010000000000000515BI0100001447	1	Kg.
336	336	13.42.2 E.R.W. tubes	BI01010001010000000000000515BI0100001448	1	Kg.
337	337	13.42.3 G.I. pipes	BI01010001010000000000000515BI0100001449	1	Kg.
338	338	Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. HSR 13.43	BI01010001010000000000000515BI0100001450	1	each
339	339	Open - Graded Premix Surfacing 20 mm thickness HSR 17.33\n17.33.1 Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of crushed stone aggregates of specified grading premixed in a continuous type of hot mix plant of appropriate capacity not less not less than 75 tonne per hour, with bituminous binder VG - 10 @ 1.46 kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications. HSR 17.33	BI01010001010000000000000515BI0100001451	1	sqm
340	340	Close Graded Premix Surfacing/Mixed Seal Surfacing Surfacing 20 mm thickness (Type B) with VG-30 HSR 17.35\n17.35.1 Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness Type B composed of crushed stone aggregates of specified grading premixed in a continuous type of hot mix plant of appropriate capacity not less not less than 75 tonne per hour, with bituminous binder VG - 30 @ 1.9 kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 508 of MORT&H specifications.	BI01010001010000000000000515BI0100001452	1	sqm
341	341	17.35.2 Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness Type B composed of crushed stone aggregates of specified grading premixed in a continuous type of hot mix plant of appropriate capacity not less not less than 75 tonne per hour, with bituminous binder VG - 10 @ 1.9 kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 508 of MORT&H specifications.	BI01010001010000000000000515BI0100001453	1	sqm
342	342	Seal Coat HSR 17.36\n17.36.3 Type B with VG - 10 bituminous binder\nProviding and laying of premix sand seal coat premixed in continuous type HMP of appropriate capacity not less than 75 tonnes/ hours using specified fine aggregates and penetration grade bitumen @0.68 kg/sqm laid to specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications.	BI01010001010000000000000515BI0100001454	1	sqm
343	343	Laying of recycled Bituminous Pavement with Central Recycling Plant upto 75mm HSR 17.43\n17.43.2 Dismantling of existing damaged Bitumen surface by cold Milling Machine up to 50 mm depth and hauling the milled material up to 10 km and stacking at nearest recycling Plant site	BI01010001010000000000000515BI0100001455	1	cum
344	344	Restoration of Rain Cuts HSR 17.47\nRestoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes, as per clause 3002 of MORT&H specifications HSR 17.47\nNote: - Only 75 per cent of fresh material has been provided as 25 per cent can be retrieved at site from earth that is flown down the slope in the form of slurry and deposited at the foot of there in cuts	BI01010001010000000000000515BI0100001456	1	cum
345	345	Maintenance of Earthen Shoulder (filling with fresh soil) HSR 17.48 \nMaking up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment as per technical clause 3003 of MORT&H specifications	BI01010001010000000000000515BI0100001457	1	cum
346	346	Patch Work with close graded Premix Surfacing/Mixed seal Surfacing 20 mm thickness (Type B) HSR 17.50\nProviding and laying patch work with close graded premixed surfacing material of 20 mm thickness Type B using penetration grade Bitumen VG - 10 @ 1.9 kg per sqm and crushed aggregates of specified grading after trimming the pot holes, removal of failed material, including mixing in a continuous type of HMP, carriage of mixed material and rolling with a smooth wheeled roller to match the adjoining surface complete as per technical clause 508 of MORT&H specifications	BI01010001010000000000000515BI0100001458	1	sqm
347	347	Patch work Seal coat Type B HSR 17.51\nProviding and laying of premix sand seal coat premixed in continuous type HMP of appropriate capacity not less than 75 tonnes/ hours using specified fine aggregates and penetration grade bitumen @0.68 kg/sqm laid to specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications.	BI01010001010000000000000515BI0100001459	1	sqm
348	348	Patch work with Water Bound Macadam Grading - II (with screening) HSR 17.53\n17.53.1 Providing, laying patchwork with stone aggregates of Grading - II laid to water bound macadam specifications after trimming the pot holes, removal of failed material, hand packing, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregates, watering, and rolling with smooth wheeled roller 8 - 10 tonne to match the adjoining surface complete as per technical clause 404 of MORT&H specifications	BI01010001010000000000000515BI0100001460	1	cum
349	349	17.53.2 Providing, laying patchwork with stone aggregates of Grading - II laid to water bound macadam specifications after trimming the pot holes, removal of failed material, hand packing, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregates, watering, and rolling with smooth wheeled roller 8 - 10 tonne to match the adjoining surface complete as per technical clause 404 of MORT&H specifications	BI01010001010000000000000515BI0100001461	1	cum
350	350	Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm. HSR 17.54\nRemoval of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 of MORT&H specifications\nNote: - For detailed working of quantities of aggregates, refer item 5.8 of chapter 5\nGrading I - 19mm(Nominal size)	BI01010001010000000000000515BI0100001462	1	sqm
351	351	Grading-II 13mm (Nominal size)	BI01010001010000000000000515BI0100001463	1	sqm
352	352	Rectangular Concrete Block Pavement 17.66\n17.66.1 Providing and laying of cement concrete blocks of size 0.450 m x 0.300 m x 0.15 m of cement concrete (C.C) M30 grade and spreading 25 mm thick sand underneath filling joints with sand on existing W.B.M. base as per technical specification clause 1503	BI01010001010000000000000515BI0100001464	1	cum
353	353	Removal of existing CC Block HSR 17.67	BI01010001010000000000000515BI0100001465	1	cum
354	354	Relaying of available (removed and stacked) C.C. Block M-30 Size 450x300x150mm HSR 17.68	BI01010001010000000000000515BI0100001466	1	cum
355	355	17.69.2 Providing and Laying 80 mm thick ISI marked Interlocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 40 over the bed of 30 mm thick fine sand complete in all respect.	BI01010001010000000000000515BI0100001467	1	sqm
356	356	17.69.3 Providing and Laying 60 mm thick ISI marked Interlocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 35 over the bed of 25 mm thick fine sand complete in all respect.	BI01010001010000000000000515BI0100001468	1	sqm
357	357	Removal of existing IPB by manual means and disposal of dismantled material with all lifts and up to a lead of 1000 m as per technical specification clause 202.3 HSR 17.70	BI01010001010000000000000515BI0100001469	1	sqm
358	358	Relaying of available (removed and stacked) Interlocking Paver Block Pavement having thickness 100mm/80 mm/ 60 mm (average = 80mm) as per drawings and Technical Specification Clause 1504 HSR 17.71	BI01010001010000000000000515BI0100001470	1	sqm
359	359	Fixing glass pieces on top of walls. HSR 18.61	BI01010001010000000000000515BI0100001471	1	metre
360	360	Dismantling disjointing, removal and carriage to stores, G.I. pipelines, specials, valves and fittings. HSR 20.50\n20.50.1 15 mm internal diametre of the pipeline	BI01010001010000000000000515BI0100001472	1	per cut
361	361	20.50.2 20 mm internal diametre of the pipeline	BI01010001010000000000000515BI0100001473	1	per cut
362	362	20.50.3 25 mm internal diametre of the pipeline	BI01010001010000000000000515BI0100001474	1	per cut
363	363	20.50.4 32 mm internal diametre of the pipeline	BI01010001010000000000000515BI0100001475	1	per cut
364	364	20.50.5 40 mm internal diametre of the pipeline	BI01010001010000000000000515BI0100001476	1	per cut
365	365	20.50.6 50 mm internal diametre of the pipeline	BI01010001010000000000000515BI0100001477	1	per cut
366	366	20.50.7 65 mm internal diametre of the pipeline	BI01010001010000000000000515BI0100001478	1	per cut
367	367	20.50.8 80 mm internal diametre of the pipeline	BI01010001010000000000000515BI0100001479	1	per cut
368	368	20.50.9 100 mm internal diametre of the pipeline	BI01010001010000000000000515BI0100001480	1	per cut
369	369	Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-9 grade S&S pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (EPDM/SBR) joints as per IS: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer.\nNote: E/W to be measured and paid separately. HSR 20.63\n20.63.1 100 mm i/d	BI01010001010000000000000515BI0100001481	1	per metre
370	370	20.63.2 150 mm i/d	BI01010001010000000000000515BI0100001482	1	per metre
371	371	20.63.3 200 mm i/d	BI01010001010000000000000515BI0100001483	1	per metre
372	372	20.63.4 250 mm i/d	BI01010001010000000000000515BI0100001484	1	per metre
373	373	20.63.5 300 mm i/d	BI01010001010000000000000515BI0100001485	1	per metre
374	374	Extra for fixing K-9 D1 socketed or flanged pipe valves and specials casting in vertical positions for over head reservoirs and stand pipes etc. including cost of all special scaffolding derricks , jim poles, tools and plants, ropes, guyes complete. HSR 20.65\n20.65.1 100 mm i/d	BI01010001010000000000000515BI0100001486	1	per metre
375	375	20.65.2 150 mm i/d	BI01010001010000000000000515BI0100001487	1	per metre
376	376	20.65.3 200 mm i/d	BI01010001010000000000000515BI0100001488	1	per metre
377	377	20.65.4 250 mm i/d	BI01010001010000000000000515BI0100001489	1	per metre
378	378	20.65.5 300 mm i/d	BI01010001010000000000000515BI0100001490	1	per metre
379	379	Cutting DI pipe and chipping or filling the surface to a uniform finish HSR 20.66\n20.66.1 100 mm i/d	BI01010001010000000000000515BI0100001491	1	per cut
380	380	20.66.2 150 mm i/d	BI01010001010000000000000515BI0100001492	1	per cut
381	381	20.66.3 200 mm i/d	BI01010001010000000000000515BI0100001493	1	per cut
382	382	20.66.4 250 mm i/d	BI01010001010000000000000515BI0100001494	1	per cut
383	383	20.66.5 300 mm i/d	BI01010001010000000000000515BI0100001495	1	per cut
384	384	Joining DI socketed pipes, valves and special with rubber tyton joints fitted complete including cost of labour and tools etc. and tested complete. HSR 20.67\n20.67.1 100 mm i/d	BI01010001010000000000000515BI0100001496	1	per joint
385	385	20.67.2 150 mm i/d	BI01010001010000000000000515BI0100001497	1	per joint
386	386	20.67.3 200 mm i/d	BI01010001010000000000000515BI0100001498	1	per joint
387	387	20.67.4 250 mm i/d	BI01010001010000000000000515BI0100001499	1	per joint
388	388	20.67.5 300 mm i/d	BI01010001010000000000000515BI0100001500	1	per joint
389	389	Providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths Ductile Iron (DI) standard specials plain /flanged/ socketed confirming to IS9523-2000 with rubber ring (EPDM/SBR) joints such as tees, bends, tapers, caps etc. with in trenches in DI pipe line complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. HSR 20.68\n20.68.1 Up to 300mm dia	BI01010001010000000000000515BI0100001501	1	per kg.
390	390	Providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths cast iron (CI) standard specials plain /flanged/ socketed confirming to IS13382 with rubber ring, nut bolts and rubber sheet such as tees, bends, tapers, caps etc. complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. HSR 20.69\n20.69.1 Up to 300mm dia	BI01010001010000000000000515BI0100001502	1	per kg.
391	391	Providing and Lowering 225 mm outer dia UPVC pipe threaded (10kg/CM2) duly ISI marked IS Code 12818:1992 complete in all respect as per directions of Engineer-in-charge	BI01010001010000000000000515BI0100001503	1	metre
392	392	Providing and lowering 225mm outer dia UPVC filter Jali (10 Kg/CM2) duly ISI marked IS Code 12818:1992 complete in all respect as per directions of Engineer-in-charge	BI01010001010000000000000515BI0100001504	1	metre
393	393	Providing and fixing 250 mm M.S. clamp as for suitable pipe with nut & bolt complete in all respect as per directions of Engineer-in-charge HSR 20.93	BI01010001010000000000000515BI0100001505	1	each
394	394	Lowering salt glazed stoneware pipes and specials into trenches for all depths and laying out the same to correct alignment gradient, level etc in trenches including all dressing and trimming of bed and sides of trenches, if required, trimming and cutting of concrete beds and joint holes, supporting the pipes and specials, in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benching hunching and envelopes are completed. The sewer shall rest on the bed at every point throughout its length and to ensure this, it shall be grouted in without extra charge by the contractor with lime surkhi mortar, in the case of lime concrete beds and 1:3 cement sand mortar in the case of cement concrete beds including cartage from Divisional Store or nearest Railway station to site of work.\nThe internal diameter of sewer being :- HSR 21.38\n21.38.1 100 mm internal diameter of sewer	BI01010001010000000000000515BI0100001506	1	10 metres of completed sewer
395	395	21.38.2 150 mm internal diameter of sewer	BI01010001010000000000000515BI0100001507	1	10 metres of completed sewer
396	396	21.38.3 175 mm internal diameter of sewer	BI01010001010000000000000515BI0100001508	1	10 metres of completed sewer
397	397	21.38.4 200 mm internal diameter of sewer	BI01010001010000000000000515BI0100001509	1	10 metres of completed sewer
398	398	21.38.5 225 mm internal diameter of sewer	BI01010001010000000000000515BI0100001510	1	10 metres of completed sewer
399	399	21.38.6 250 mm internal diameter of sewer	BI01010001010000000000000515BI0100001511	1	10 metres of completed sewer
400	400	21.38.7 300 mm internal diameter of sewer	BI01010001010000000000000515BI0100001512	1	10 metres of completed sewer
401	401	Cutting glazed stoneware pipes and specials chipping and finishing the cut surface to a uniform finish and roughing the part of the pipes, if any entering the sockets of the adjacent pipes complete, to the satisfaction of the engineer-in-charge of the works. HSR 21.40\n21.40.1 100 mm internal diametre of pipes	BI01010001010000000000000515BI0100001513	1	per cut
402	402	21.40.2 150 mm internal diametre of pipes	BI01010001010000000000000515BI0100001514	1	per cut
403	403	21.40.3 175 mm internal diametre of pipes	BI01010001010000000000000515BI0100001515	1	per cut
404	404	21.40.4 200 mm internal diametre of pipes	BI01010001010000000000000515BI0100001516	1	per cut
405	405	21.40.5 225 mm internal diametre of pipes	BI01010001010000000000000515BI0100001517	1	per cut
406	406	21.40.6 250 mm internal diametre of pipes	BI01010001010000000000000515BI0100001518	1	per cut
407	407	21.40.7 300 mm internal diametre of pipes	BI01010001010000000000000515BI0100001519	1	per cut
408	408	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: HSR 22.1\n22.1.1 White vitreous chinaware Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps	BI01010001010000000000000515BI0100001520	1	each
409	409	22.1.2 White vitreous chinaware Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap	BI01010001010000000000000515BI0100001521	1	each
410	410	22.1.3 White vitreous chinaware Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps	BI01010001010000000000000515BI0100001522	1	each
411	411	22.1.4 White vitreous chinaware Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap	BI01010001010000000000000515BI0100001523	1	each
412	412	Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- HSR 22.2\n22.2.1 White vitreous chinaware Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer	BI01010001010000000000000515BI0100001524	1	each
413	413	Providing and fixing white vitreous chinaware pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. HSR 22.5	BI01010001010000000000000515BI0100001525	1	each
414	414	Providing and fixing white vitreous chinaware laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : HSR 22.6\n22.6.1 Size 450x300x150 mm	BI01010001010000000000000515BI0100001526	1	each
415	415	22.6.2 Size 600x450x200 mm	BI01010001010000000000000515BI0100001527	1	each
416	416	Providing and fixing white vitreous chinaware laboratory sink including making all connections excluding cost of fittings : HSR 22.7 \n22.7.1 Size 450x300x150 mm	BI01010001010000000000000515BI0100001528	1	each
417	417	22.7.2 Size 600x450x200 mm	BI01010001010000000000000515BI0100001529	1	each
418	418	Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of Engineer-in-charge). HSR 22.8\n22.8.1 One way	BI01010001010000000000000515BI0100001530	1	each
419	419	22.8.2 Two way	BI01010001010000000000000515BI0100001531	1	each
420	420	22.8.3 Three way	BI01010001010000000000000515BI0100001532	1	each
421	421	Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: HSR 22.9\n22.9.1 White glazed fire clay kitchen sink of size 600x450x 250 mm	BI01010001010000000000000515BI0100001533	1	each
422	422	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : HSR 22.10\n22.10.2 Kitchen sink without drain board\n22.10.2.1 610x510 mm bowl depth 200 mm	BI01010001010000000000000515BI0100001534	1	each
423	423	22.10.2.2 610x460 mm bowl depth 200 mm	BI01010001010000000000000515BI0100001535	1	each
424	424	22.10.2.3 470x420 mm bowl depth 178 mm	BI01010001010000000000000515BI0100001536	1	each
425	425	22.11.1 White glazed fire clay draining board of size 600x450x 25 mm	BI01010001010000000000000515BI0100001537	1	each
426	426	Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. HSR 22.12\n22.12.1 15 mm nominal dia	BI01010001010000000000000515BI0100001538	1	each
427	427	Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. HSR 22.15	BI01010001010000000000000515BI0100001539	1	each
428	428	Providing and fixing 40mm i/d G.I. waste pipe embedded in walls up to floor level including cost of union and plumber joint HSR 22.16	BI01010001010000000000000515BI0100001540	1	each
429	429	Providing and fixing 40mm i/d chromium plated trap with chromium plated pipe to wall with walflange completed for use with sinks HSR 22.17\n22.17.1 With Bottle Trap (Indian make)	BI01010001010000000000000515BI0100001541	1	each
430	430	22.17.2 With C.P. Brass 'P\" or 'S' Trap	BI01010001010000000000000515BI0100001542	1	each
431	431	Providing and fixing 100 mm sand cast Iron grating for gully trap. HSR	BI01010001010000000000000515BI0100001543	1	each
432	432	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: HSR 22.22\n22.22.1 White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests	BI01010001010000000000000515BI0100001544	1	each
433	433	22.22.2 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests	BI01010001010000000000000515BI0100001545	1	each
434	434	Providing and fixing white vitreous chinaware pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : HSR 22.23\n22.23.1 W.C. pan with ISI marked white solid plastic seat and lid	BI01010001010000000000000515BI0100001546	1	each
435	435	22.23.2 W.C. pan with ISI marked black solid plastic seat and lid	BI01010001010000000000000515BI0100001547	1	each
436	436	22.24.2 W.C. pan with ISI marked black solid plastic seat and lid	BI01010001010000000000000515BI0100001548	1	each
437	437	Providing and fixing white vitreous chinaware flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : HSR 22.25\n22.25.2 One urinal basin with manually operated 5 litres PVC cistern and manually operated stop cock/ angle valve	BI01010001010000000000000515BI0100001549	1	each
438	438	Providing and fixing white vitreous chinaware flat back half stall urinal of size 580x380x350 mm with white PVC flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : HSR 22.26\n22.26.2 Single half stall urinal with manually operated5 litre P.V.C. flushing cistern and manually operated stop cock/ angle valve	BI01010001010000000000000515BI0100001550	1	each
439	439	22.26.3 Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern	BI01010001010000000000000515BI0100001551	1	each
440	440	22.26.4 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern	BI01010001010000000000000515BI0100001552	1	each
441	441	Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. HSR 22.33	BI01010001010000000000000515BI0100001553	1	each
442	442	Providing and fixing floor mounted, white vitreous chinaware single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous chinaware cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. HSR 22.34	BI01010001010000000000000515BI0100001554	1	each
443	443	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : HSR 22.36\n22.36.1 White solid plastic seat with lid	BI01010001010000000000000515BI0100001555	1	each
444	444	22.36.2 Black solid plastic seat with lid	BI01010001010000000000000515BI0100001556	1	each
445	445	22.36.3 Coloured (other than black & white) solid plastic seat with lid	BI01010001010000000000000515BI0100001557	1	each
446	446	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. HSR 22.38	BI01010001010000000000000515BI0100001558	1	each
447	447	Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. HSR 22.39\n22.39.1 10 litre capacity - White	BI01010001010000000000000515BI0100001559	1	each
448	448	22.39.2 10 litre capacity - coloured	BI01010001010000000000000515BI0100001560	1	each
449	449	Providing and fixing toilet paper holder : HSR 22.42\n22.42.1 C.P. brass	BI01010001010000000000000515BI0100001561	1	each
450	450	22.42.2 vitreous chinaware	BI01010001010000000000000515BI0100001562	1	each
451	451	Providing and fixing white vitreous chinaware battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. HSR 22.46	BI01010001010000000000000515BI0100001563	1	each
452	452	Providing and fixing partitions for different type of urinals. HSR 22.50\n22.50.1 Vitreous Chinaware Partition plate.\n22.50.1.1 Small size 680mm x 330 mm\n22.50.1.1.1 White	BI01010001010000000000000515BI0100001564	1	each
453	453	22.50.1.1.2 Single Colour	BI01010001010000000000000515BI0100001565	1	each
454	454	22.50.1.1.3 Mixed Colour	BI01010001010000000000000515BI0100001566	1	each
455	455	22.50.1.2 Large size 835mm x 355 mm\n22.50.1.2.1 White	BI01010001010000000000000515BI0100001567	1	each
456	456	22.50.1.2.2 Single Colour	BI01010001010000000000000515BI0100001568	1	each
457	457	22.50.1.2.3 Mixed Colour	BI01010001010000000000000515BI0100001569	1	each
458	458	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. HSR 22.85\nInternal work - Exposed on wall\n22.85.1 15 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001570	1	metre
459	459	22.85.2 20 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001571	1	metre
460	460	22.85.3 25 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001572	1	metre
461	461	22.85.4 32 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001573	1	metre
462	462	22.85.5 40 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001574	1	metre
463	463	22.85.6 50 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001575	1	metre
464	464	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. HSR 22.86\nConcealed work, including cutting chases and making good the walls etc.\n22.86.1 15 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001576	1	metre
465	465	22.86.2 20 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001577	1	metre
466	466	22.86.3 25 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001578	1	metre
467	467	22.86.4 32 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001579	1	metre
468	468	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. HSR 22.87\nExternal work\n22.87.1 15 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001580	1	metre
469	469	22.87.2 20 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001581	1	metre
470	470	22.87.3 25 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001582	1	metre
471	471	22.87.4 32 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001583	1	metre
472	472	22.87.5 40 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001584	1	metre
473	473	22.87.6 50 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001585	1	metre
474	474	22.87.7 62.50 mm nominal inner dia Pipes	BI01010001010000000000000515BI0100001586	1	metre
475	475	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. HSR 22.88\nInternal work - Exposed on wall\n22.88.1 15 mm dia nominal bore	BI01010001010000000000000515BI0100001587	1	metre
476	476	22.88.2 20 mm dia nominal bore	BI01010001010000000000000515BI0100001588	1	metre
477	477	22.88.3 25 mm dia nominal bore	BI01010001010000000000000515BI0100001589	1	metre
478	478	22.88.4 32 mm dia nominal bore	BI01010001010000000000000515BI0100001590	1	metre
479	479	22.88.5 40 mm dia nominal bore	BI01010001010000000000000515BI0100001591	1	metre
480	480	22.88.6 50 mm dia nominal bore	BI01010001010000000000000515BI0100001592	1	metre
481	481	Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : HSR 22.89\n22.89.1 15 mm dia nominal bore	BI01010001010000000000000515BI0100001593	1	metre
482	482	22.89.2 20 mm dia nominal bore	BI01010001010000000000000515BI0100001594	1	metre
483	483	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : HSR 22.92\n22.92.1 25 to 40 mm nominal bore	BI01010001010000000000000515BI0100001595	1	each
484	484	22.92.2 50 to 80 mm nominal bore	BI01010001010000000000000515BI0100001596	1	each
485	485	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : HSR 22.94\n22.94.1 15 mm nominal bore	BI01010001010000000000000515BI0100001597	1	each
486	486	22.94.2 20 mm nominal bore	BI01010001010000000000000515BI0100001598	1	each
487	487	22.94.3 25 mm nominal bore	BI01010001010000000000000515BI0100001599	1	each
488	488	22.94.4 32 mm nominal bore	BI01010001010000000000000515BI0100001600	1	each
489	489	22.94.5 40 mm nominal bore	BI01010001010000000000000515BI0100001601	1	each
490	490	22.94.6 50 mm nominal bore	BI01010001010000000000000515BI0100001602	1	each
491	491	22.94.7 65 mm nominal bore	BI01010001010000000000000515BI0100001603	1	each
492	492	22.94.8 80 mm nominal bore	BI01010001010000000000000515BI0100001604	1	each
493	493	Providing and fixing brass bib cock of approved quality : HSR 22.96\n22.96.1 15 mm nominal bore	BI01010001010000000000000515BI0100001605	1	each
494	494	22.96.2 20 mm nominal bore	BI01010001010000000000000515BI0100001606	1	each
495	495	Providing and fixing brass stop cock of approved quality : HSR 22.97\n22.97.1 15 mm nominal bore	BI01010001010000000000000515BI0100001607	1	each
496	496	22.97.2 20 mm nominal bore	BI01010001010000000000000515BI0100001608	1	each
497	497	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : HSR 22.98\n22.98.1 25 mm nominal bore	BI01010001010000000000000515BI0100001609	1	each
498	498	22.98.2 20 mm nominal bore	BI01010001010000000000000515BI0100001610	1	each
499	499	22.98.3 32 mm nominal bore.	BI01010001010000000000000515BI0100001611	1	each
500	500	22.98.4 40 mm nominal bore	BI01010001010000000000000515BI0100001612	1	each

Also Visit

Tenders

Haryana Tenders

Electrical Industry Tenders

Electrical Work Tenders

Electrical Maintenance Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Empanlment Of Contractor For Executing Special Repair Renovation Modification Work Civil Ph And Ei At Mamc Agroha For The Year 2021-22 Works Upto The Cost Of Rs . 5 . 00 Lakhs, Maharaja Agrasen Medical College Agroha (Hisar)-Haryana

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Empanlment Of Contractor For Executing Special Repair Renovation Modification Work Civil Ph And Ei At Mamc Agroha For The Year 2021-22 Works Upto The Cost Of Rs . 5 . 00 Lakhs, Maharaja Agrasen Medical College Agroha (Hisar)-Haryana

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us